From patchwork Thu Nov 14 13:15:25 2019
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
X-Patchwork-Submitter: Linus Walleij <linus.walleij@linaro.org>
X-Patchwork-Id: 11243719
Return-Path: <SRS0=2RIj=ZG=lists.freedesktop.org=dri-devel-bounces@kernel.org>
Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org
 [172.30.200.123])
	by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 3646E13BD
	for <patchwork-dri-devel@patchwork.kernel.org>;
 Thu, 14 Nov 2019 13:15:38 +0000 (UTC)
Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177])
	(using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
	(No client certificate requested)
	by mail.kernel.org (Postfix) with ESMTPS id 1EAEE2071B
	for <patchwork-dri-devel@patchwork.kernel.org>;
 Thu, 14 Nov 2019 13:15:38 +0000 (UTC)
DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 1EAEE2071B
Authentication-Results: mail.kernel.org;
 dmarc=fail (p=none dis=none) header.from=linaro.org
Authentication-Results: mail.kernel.org;
 spf=none smtp.mailfrom=dri-devel-bounces@lists.freedesktop.org
Received: from gabe.freedesktop.org (localhost [127.0.0.1])
	by gabe.freedesktop.org (Postfix) with ESMTP id 9B4746E258;
	Thu, 14 Nov 2019 13:15:36 +0000 (UTC)
X-Original-To: dri-devel@lists.freedesktop.org
Delivered-To: dri-devel@lists.freedesktop.org
Received: from mail-lf1-x143.google.com (mail-lf1-x143.google.com
 [IPv6:2a00:1450:4864:20::143])
 by gabe.freedesktop.org (Postfix) with ESMTPS id 48F5E6E2C7
 for <dri-devel@lists.freedesktop.org>; Thu, 14 Nov 2019 13:15:34 +0000 (UTC)
Received: by mail-lf1-x143.google.com with SMTP id x22so881383lfa.3
 for <dri-devel@lists.freedesktop.org>; Thu, 14 Nov 2019 05:15:34 -0800 (PST)
X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
 d=1e100.net; s=20161025;
 h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to
 :references:mime-version:content-transfer-encoding;
 bh=vrYNWZKVDdctkiL8VeF9vvo4uBCjPTCOEtoL4cULlKo=;
 b=Mr12m6n6M0IyMJOXvHHh9m7PcTP1YYc6It9cYhWrGrdImhTKMhIkLpqOVUxOqHb+pW
 mXCqu2a7UvHwKy/0TCIkQtSrkAq02g7nWyUDNVH5X6D9DXSRvVde4ApXt3R91Mx7yhEn
 LzNyCAOPdLtg+CXHg6wN2HF0mDLtUkFxIjVUfSDl6ck4IM9pMdMugpXRrd62+LCYArkf
 Yuddf5pzvg+nqEAoTK3++RlLTK0KX7TQbjgERpZ3ep5lqBZ/CqHP++edNCjTx1/mrxF7
 pXs8vgkI59kSBwSHlfHHBCLFEPJX1mtksPyluHUxT5BpId4sIkxeAqXU4aWNpmMlV8SP
 KI+A==
X-Gm-Message-State: APjAAAX8l2CnZTaV2ZVMXHmX6TLIsw/KWtLpDPs3Syrsc1jw3VwU6Ev0
 7GUBfSCKObv7CR2dBd1No/iJmQ==
X-Google-Smtp-Source: 
 APXvYqy46vd3gfbiefnHcKHThDTL8g/lyJvy64oySfPxbZkRDFp0SQW6nToqnnqzmgf4gJxTwt+QkQ==
X-Received: by 2002:ac2:4a8a:: with SMTP id l10mr6691528lfp.185.1573737332417;
 Thu, 14 Nov 2019 05:15:32 -0800 (PST)
Received: from genomnajs.ideon.se ([85.235.10.227])
 by smtp.gmail.com with ESMTPSA id r7sm2283515ljc.74.2019.11.14.05.15.31
 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256);
 Thu, 14 Nov 2019 05:15:31 -0800 (PST)
From: Linus Walleij <linus.walleij@linaro.org>
To: Thierry Reding <thierry.reding@gmail.com>,
 Sam Ravnborg <sam@ravnborg.org>,
 dri-devel@lists.freedesktop.org, Rob Herring <robh@kernel.org>
Subject: [PATCH 2/2 v6] drm/panel: Add driver for Sony ACX424AKP panel
Date: Thu, 14 Nov 2019 14:15:25 +0100
Message-Id: <20191114131525.3988-2-linus.walleij@linaro.org>
X-Mailer: git-send-email 2.21.0
In-Reply-To: <20191114131525.3988-1-linus.walleij@linaro.org>
References: <20191114131525.3988-1-linus.walleij@linaro.org>
MIME-Version: 1.0
X-Mailman-Original-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
 d=linaro.org; s=google;
 h=from:to:cc:subject:date:message-id:in-reply-to:references
 :mime-version:content-transfer-encoding;
 bh=vrYNWZKVDdctkiL8VeF9vvo4uBCjPTCOEtoL4cULlKo=;
 b=Dj8bRnrlIaNGMmRamxgpnZmPTwp4ob/pCJ3PMQ4hoivA3WhRuZV58+ILGqtZhsggEy
 Glap1eDIlzyxPdLhMHX72GQysV3EVOQ5mqN+ULauQ52JhmDaLeEVcQPcimal5bxzff2y
 /tSnzc3Ngm+V1EscHtL1DXYOhAvmN7x38u/HIw6gyqvRk/jlCEGIZGIPafkDH/4CW6IU
 4EbPvwjoOm93C4ilTLKKJv9Re646WG5O0CYGpCpzHlfIM5m+8ljvGkTe+wKMnXpVCUH/
 ZqIPBJKT2i+CMQkT2QBeIqxUXGvRk6u8qHftT2Vt+DoBtufN9bCtwxwbq2HFx8zFDOtH
 rZmA==
X-BeenThere: dri-devel@lists.freedesktop.org
X-Mailman-Version: 2.1.23
Precedence: list
List-Id: Direct Rendering Infrastructure - Development
 <dri-devel.lists.freedesktop.org>
List-Unsubscribe: <https://lists.freedesktop.org/mailman/options/dri-devel>,
 <mailto:dri-devel-request@lists.freedesktop.org?subject=unsubscribe>
List-Archive: <https://lists.freedesktop.org/archives/dri-devel>
List-Post: <mailto:dri-devel@lists.freedesktop.org>
List-Help: <mailto:dri-devel-request@lists.freedesktop.org?subject=help>
List-Subscribe: <https://lists.freedesktop.org/mailman/listinfo/dri-devel>,
 <mailto:dri-devel-request@lists.freedesktop.org?subject=subscribe>
Cc: Stephan Gerhold <stephan@gerhold.net>
Errors-To: dri-devel-bounces@lists.freedesktop.org
Sender: "dri-devel" <dri-devel-bounces@lists.freedesktop.org>

The Sony ACX424AKP is a command/videomode DSI panel for
mobile devices. It is used on the ST-Ericsson HREF520
reference design. We support video mode by default, but
it is possible to switch the panel into command mode
by using the bool property "dsi-command-mode".

Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v4->v5:
- Bindings were iterated separately so a jump in versioning.
- Add Stephan as reviewer.
ChangeLog v3->v4:
- No changes just resending with the new binding updates.
ChangeLog v2->v3:
- No changes just resending with the new binding updates.
ChangeLog v1->v2:
- Fix up the ID read function to split into reading header,
  version and ID, store the version in the struct.
- Get rid of a surplus semicolon found by the build robot
  while rewriting the above code.
- Use unsigned int in probe() loop.
- Set vrefresh to 60Hz, as good as any, the measured vrefresh
  in continous command mode is ~117 Hz.
- Use a different for() idiom while retrying to read ID
  5 times.
- Drop the sync pulse setting, we are not using this, this
  panel uses an event.
- Use the generic "enforce-video-mode" for video mode
  enforcement.
---
 drivers/gpu/drm/panel/Kconfig                |   7 +
 drivers/gpu/drm/panel/Makefile               |   1 +
 drivers/gpu/drm/panel/panel-sony-acx424akp.c | 540 +++++++++++++++++++
 include/video/mipi_display.h                 |   1 +
 4 files changed, 549 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-sony-acx424akp.c

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index f152bc4eeb53..959df5bea7d2 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -316,6 +316,13 @@ config DRM_PANEL_SITRONIX_ST7789V
 	  Say Y here if you want to enable support for the Sitronix
 	  ST7789V controller for 240x320 LCD panels
 
+config DRM_PANEL_SONY_ACX424AKP
+	tristate "Sony ACX424AKP DSI command mode panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	select VIDEOMODE_HELPERS
+
 config DRM_PANEL_SONY_ACX565AKM
 	tristate "Sony ACX565AKM panel"
 	depends on GPIOLIB && OF && SPI
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index b6cd39fe0f20..0b51793e3b43 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_DRM_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
 obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
 obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
+obj-$(CONFIG_DRM_PANEL_SONY_ACX424AKP) += panel-sony-acx424akp.o
 obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
 obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
 obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
diff --git a/drivers/gpu/drm/panel/panel-sony-acx424akp.c b/drivers/gpu/drm/panel/panel-sony-acx424akp.c
new file mode 100644
index 000000000000..2382b608b67b
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-sony-acx424akp.c
@@ -0,0 +1,540 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * MIPI-DSI Sony ACX424AKP panel driver. This is a 480x864
+ * AMOLED panel with a command-only DSI interface.
+ *
+ * Copyright (C) Linaro Ltd. 2019
+ * Author: Linus Walleij
+ * Based on code and know-how from Marcus Lorentzon
+ * Copyright (C) ST-Ericsson SA 2010
+ */
+
+#include <drm/drm_modes.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+#include <video/mipi_display.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/backlight.h>
+
+#define ACX424_DCS_READ_ID1		0xDA
+#define ACX424_DCS_READ_ID2		0xDB
+#define ACX424_DCS_READ_ID3		0xDC
+
+#define DISPLAY_SONY_ACX424AKP_ID1	0x811b
+#define DISPLAY_SONY_ACX424AKP_ID2	0x811a
+#define DISPLAY_SONY_ACX424AKP_ID3	0x8000
+
+struct acx424akp {
+	struct device *dev;
+	struct drm_panel panel;
+	struct backlight_device *bl;
+	struct regulator *supply;
+	struct gpio_desc *reset_gpio;
+	u8 version;
+	bool video_mode;
+};
+
+static const struct drm_display_mode sony_acx424akp_vid_mode = {
+	.clock = 330000,
+	.hdisplay = 480,
+	.hsync_start = 480 + 15,
+	.hsync_end = 480 + 15 + 0,
+	.htotal = 480 + 15 + 0 + 15,
+	.vdisplay = 864,
+	.vsync_start = 864 + 14,
+	.vsync_end = 864 + 14 + 1,
+	.vtotal = 864 + 14 + 1 + 11,
+	.vrefresh = 60,
+	.width_mm = 48,
+	.height_mm = 84,
+	.flags = DRM_MODE_FLAG_PVSYNC,
+};
+
+/*
+ * The timings are not very helpful as the display is used in
+ * command mode using the maximum HS frequency.
+ */
+static const struct drm_display_mode sony_acx424akp_cmd_mode = {
+	.clock = 420160,
+	.hdisplay = 480,
+	.hsync_start = 480 + 154,
+	.hsync_end = 480 + 154 + 16,
+	.htotal = 480 + 154 + 16 + 32,
+	.vdisplay = 864,
+	.vsync_start = 864 + 1,
+	.vsync_end = 864 + 1 + 1,
+	.vtotal = 864 + 1 + 1 + 1,
+	/*
+	 * Some desired refresh rate, experiments at the maximum "pixel"
+	 * clock speed (HS clock 420 MHz) yields around 117Hz.
+	 */
+	.vrefresh = 60,
+	.width_mm = 48,
+	.height_mm = 84,
+};
+
+static inline struct acx424akp *panel_to_acx424akp(struct drm_panel *panel)
+{
+	return container_of(panel, struct acx424akp, panel);
+}
+
+#define FOSC			20 /* 20Mhz */
+#define SCALE_FACTOR_NS_DIV_MHZ	1000
+
+static int acx424akp_set_brightness(struct backlight_device *bl)
+{
+	struct acx424akp *acx = bl_get_data(bl);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(acx->dev);
+	int period_ns = 1023;
+	int duty_ns = bl->props.brightness;
+	u8 pwm_ratio;
+	u8 pwm_div;
+	u8 par;
+	int ret;
+
+	/* Calculate the PWM duty cycle in n/256's */
+	pwm_ratio = max(((duty_ns * 256) / period_ns) - 1, 1);
+	pwm_div = max(1,
+		      ((FOSC * period_ns) / 256) /
+		      SCALE_FACTOR_NS_DIV_MHZ);
+
+	/* Set up PWM dutycycle ONE byte (differs from the standard) */
+	DRM_DEV_DEBUG(acx->dev, "calculated duty cycle %02x\n", pwm_ratio);
+	ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
+				 &pwm_ratio, 1);
+	if (ret < 0) {
+		DRM_DEV_ERROR(acx->dev,
+			      "failed to set display PWM ratio (%d)\n",
+			      ret);
+		return ret;
+	}
+
+	/*
+	 * Sequence to write PWMDIV:
+	 *	address		data
+	 *	0xF3		0xAA   CMD2 Unlock
+	 *	0x00		0x01   Enter CMD2 page 0
+	 *	0X7D		0x01   No reload MTP of CMD2 P1
+	 *	0x22		PWMDIV
+	 *	0x7F		0xAA   CMD2 page 1 lock
+	 */
+	par = 0xaa;
+	ret = mipi_dsi_dcs_write(dsi, 0xf3, &par, 1);
+	if (ret < 0) {
+		DRM_DEV_ERROR(acx->dev,
+			      "failed to unlock CMD 2 (%d)\n",
+			      ret);
+		return ret;
+	}
+	par = 0x01;
+	ret = mipi_dsi_dcs_write(dsi, 0x00, &par, 1);
+	if (ret < 0) {
+		DRM_DEV_ERROR(acx->dev,
+			      "failed to enter page 1 (%d)\n",
+			      ret);
+		return ret;
+	}
+	par = 0x01;
+	ret = mipi_dsi_dcs_write(dsi, 0x7d, &par, 1);
+	if (ret < 0) {
+		DRM_DEV_ERROR(acx->dev,
+			      "failed to disable MTP reload (%d)\n",
+			      ret);
+		return ret;
+	}
+	ret = mipi_dsi_dcs_write(dsi, 0x22, &pwm_div, 1);
+	if (ret < 0) {
+		DRM_DEV_ERROR(acx->dev,
+			      "failed to set PWM divisor (%d)\n",
+			      ret);
+		return ret;
+	}
+	par = 0xaa;
+	ret = mipi_dsi_dcs_write(dsi, 0x7f, &par, 1);
+	if (ret < 0) {
+		DRM_DEV_ERROR(acx->dev,
+			      "failed to lock CMD 2 (%d)\n",
+			      ret);
+		return ret;
+	}
+
+	/* Enable backlight */
+	par = 0x24;
+	ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY,
+				 &par, 1);
+	if (ret < 0) {
+		DRM_DEV_ERROR(acx->dev,
+			      "failed to enable display backlight (%d)\n",
+			      ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct backlight_ops acx424akp_bl_ops = {
+	.update_status = acx424akp_set_brightness,
+};
+
+static int acx424akp_read_id(struct acx424akp *acx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(acx->dev);
+	u8 header, version, id;
+	u16 val;
+	int ret;
+
+	ret = mipi_dsi_dcs_read(dsi, ACX424_DCS_READ_ID1, &header, 1);
+	if (ret < 0) {
+		DRM_DEV_ERROR(acx->dev, "could not read ID header byte\n");
+		return ret;
+	}
+	ret = mipi_dsi_dcs_read(dsi, ACX424_DCS_READ_ID2, &id, 1);
+	if (ret < 0) {
+		DRM_DEV_ERROR(acx->dev, "could not read device ID byte\n");
+		return ret;
+	}
+	ret = mipi_dsi_dcs_read(dsi, ACX424_DCS_READ_ID3, &version, 1);
+	if (ret < 0) {
+		DRM_DEV_ERROR(acx->dev, "could not read version byte\n");
+		return ret;
+	}
+
+	if (header == 0x00) {
+		DRM_DEV_ERROR(acx->dev, "device ID header is zero\n");
+		return -ENODEV;
+	}
+
+	val = (id << 8) | version;
+	switch (val) {
+	case DISPLAY_SONY_ACX424AKP_ID1:
+	case DISPLAY_SONY_ACX424AKP_ID2:
+	case DISPLAY_SONY_ACX424AKP_ID3:
+		DRM_DEV_INFO(acx->dev, "panel ID %02x, version: %02x\n",
+			     id, version);
+		break;
+	default:
+		DRM_DEV_INFO(acx->dev, "unknown panel ID %02x, version: %02x\n",
+			     id, version);
+		break;
+	}
+	acx->version = version;
+
+	return 0;
+}
+
+static int acx424akp_power_on(struct acx424akp *acx)
+{
+	int ret;
+
+	ret = regulator_enable(acx->supply);
+	if (ret) {
+		DRM_DEV_ERROR(acx->dev, "failed to enable supply (%d)\n", ret);
+		return ret;
+	}
+
+	/* Assert RESET */
+	gpiod_set_value_cansleep(acx->reset_gpio, 1);
+	udelay(20);
+	/* De-assert RESET */
+	gpiod_set_value_cansleep(acx->reset_gpio, 0);
+	msleep(11);
+
+	return 0;
+}
+
+static int acx424akp_prepare(struct drm_panel *panel)
+{
+	struct acx424akp *acx = panel_to_acx424akp(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(acx->dev);
+	const u8 mddi = 3;
+	int ret;
+
+	ret = acx424akp_power_on(acx);
+	if (ret)
+		return ret;
+
+	/* Enabe tearing mode: send TE (tearing effect) at VBLANK */
+	ret = mipi_dsi_dcs_set_tear_on(dsi,
+				       MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+	if (ret) {
+		DRM_DEV_ERROR(acx->dev, "failed to enable vblank TE (%d)\n",
+			      ret);
+		return ret;
+	}
+
+	/* Set MDDI */
+	ret = mipi_dsi_dcs_write(dsi, MIPI_DSI_DCS_SET_MDDI,
+				 &mddi, sizeof(mddi));
+	if (ret < 0) {
+		DRM_DEV_ERROR(acx->dev, "failed to set MDDI (%d)\n", ret);
+		return ret;
+	}
+
+	/* Exit sleep mode */
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret) {
+		DRM_DEV_ERROR(acx->dev, "failed to exit sleep mode (%d)\n",
+			      ret);
+		return ret;
+	}
+	msleep(140);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret) {
+		DRM_DEV_ERROR(acx->dev, "failed to turn display on (%d)\n",
+			      ret);
+		return ret;
+	}
+	if (acx->video_mode) {
+		/* In video mode turn peripheral on */
+		ret = mipi_dsi_turn_on_peripheral(dsi);
+		if (ret) {
+			dev_err(acx->dev, "failed to turn on peripheral\n");
+			return ret;
+		}
+	}
+
+	acx->bl->props.power = FB_BLANK_NORMAL;
+
+	return 0;
+}
+
+static void acx424akp_power_off(struct acx424akp *acx)
+{
+	/* Assert RESET */
+	gpiod_set_value_cansleep(acx->reset_gpio, 1);
+	msleep(11);
+
+	regulator_disable(acx->supply);
+}
+
+static int acx424akp_unprepare(struct drm_panel *panel)
+{
+	struct acx424akp *acx = panel_to_acx424akp(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(acx->dev);
+	u8 par;
+	int ret;
+
+	/* Disable backlight */
+	par = 0x00;
+	ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY,
+				 &par, 1);
+	if (ret) {
+		DRM_DEV_ERROR(acx->dev,
+			      "failed to disable display backlight (%d)\n",
+			      ret);
+		return ret;
+	}
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret) {
+		DRM_DEV_ERROR(acx->dev, "failed to turn display off (%d)\n",
+			      ret);
+		return ret;
+	}
+
+	/* Enter sleep mode */
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret) {
+		DRM_DEV_ERROR(acx->dev, "failed to enter sleep mode (%d)\n",
+			      ret);
+		return ret;
+	}
+	msleep(85);
+
+	acx424akp_power_off(acx);
+	acx->bl->props.power = FB_BLANK_POWERDOWN;
+
+	return 0;
+}
+
+static int acx424akp_enable(struct drm_panel *panel)
+{
+	struct acx424akp *acx = panel_to_acx424akp(panel);
+
+	acx->bl->props.power = FB_BLANK_UNBLANK;
+
+	return 0;
+}
+
+static int acx424akp_disable(struct drm_panel *panel)
+{
+	struct acx424akp *acx = panel_to_acx424akp(panel);
+
+	acx->bl->props.power = FB_BLANK_NORMAL;
+
+	return 0;
+}
+
+static int acx424akp_get_modes(struct drm_panel *panel)
+{
+	struct acx424akp *acx = panel_to_acx424akp(panel);
+	struct drm_connector *connector = panel->connector;
+	struct drm_display_mode *mode;
+
+	if (acx->video_mode)
+		mode = drm_mode_duplicate(panel->drm,
+					  &sony_acx424akp_vid_mode);
+	else
+		mode = drm_mode_duplicate(panel->drm,
+					  &sony_acx424akp_cmd_mode);
+	if (!mode) {
+		DRM_ERROR("bad mode or failed to add mode\n");
+		return -EINVAL;
+	}
+	drm_mode_set_name(mode);
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+
+	drm_mode_probed_add(connector, mode);
+
+	return 1; /* Number of modes */
+}
+
+static const struct drm_panel_funcs acx424akp_drm_funcs = {
+	.disable = acx424akp_disable,
+	.unprepare = acx424akp_unprepare,
+	.prepare = acx424akp_prepare,
+	.enable = acx424akp_enable,
+	.get_modes = acx424akp_get_modes,
+};
+
+static int acx424akp_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct acx424akp *acx;
+	int ret;
+	unsigned int i;
+
+	acx = devm_kzalloc(dev, sizeof(struct acx424akp), GFP_KERNEL);
+	if (!acx)
+		return -ENOMEM;
+	acx->video_mode = of_property_read_bool(dev->of_node,
+						"enforce-video-mode");
+
+	mipi_dsi_set_drvdata(dsi, acx);
+	acx->dev = dev;
+
+	dsi->lanes = 2;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	/*
+	 * FIXME: these come from the ST-Ericsson vendor driver for the
+	 * HREF520 and seems to reflect limitations in the PLLs on that
+	 * platform, if you have the datasheet, please cross-check the
+	 * actual max rates.
+	 */
+	dsi->lp_rate = 19200000;
+	dsi->hs_rate = 420160000;
+
+	if (acx->video_mode)
+		/* Burst mode using event for sync */
+		dsi->mode_flags =
+			MIPI_DSI_MODE_VIDEO |
+			MIPI_DSI_MODE_VIDEO_BURST;
+	else
+		dsi->mode_flags =
+			MIPI_DSI_CLOCK_NON_CONTINUOUS |
+			MIPI_DSI_MODE_EOT_PACKET;
+
+	acx->supply = devm_regulator_get(dev, "vddi");
+	if (IS_ERR(acx->supply))
+		return PTR_ERR(acx->supply);
+
+	/* This asserts RESET by default */
+	acx->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+						 GPIOD_OUT_HIGH);
+	if (IS_ERR(acx->reset_gpio)) {
+		ret = PTR_ERR(acx->reset_gpio);
+		if (ret != -EPROBE_DEFER)
+			DRM_DEV_ERROR(dev, "failed to request GPIO (%d)\n",
+				      ret);
+		return ret;
+	}
+
+	drm_panel_init(&acx->panel);
+	acx->panel.dev = dev;
+	acx->panel.funcs = &acx424akp_drm_funcs;
+
+	acx->bl = devm_backlight_device_register(dev, "acx424akp", dev, acx,
+						 &acx424akp_bl_ops, NULL);
+	if (IS_ERR(acx->bl)) {
+		DRM_DEV_ERROR(dev, "failed to register backlight device\n");
+		return PTR_ERR(acx->bl);
+	}
+	acx->bl->props.max_brightness = 1023;
+	acx->bl->props.brightness = 512;
+	acx->bl->props.power = FB_BLANK_POWERDOWN;
+
+	ret = drm_panel_add(&acx->panel);
+	if (ret < 0)
+		return ret;
+
+	ret = acx424akp_power_on(acx);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to power up display\n");
+		goto out_remove;
+	}
+
+	/* Try 5 times to read the device ID */
+	for (i = 0; i < 5; i++) {
+		ret = acx424akp_read_id(acx);
+		if (!ret)
+			break;
+	}
+
+	if (ret) {
+		DRM_DEV_ERROR(acx->dev, "failed to read panel ID (%d)\n", ret);
+		goto out_poweroff;
+	}
+	acx424akp_power_off(acx);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0)
+		goto out_poweroff;
+
+	return 0;
+
+out_poweroff:
+	acx424akp_power_off(acx);
+out_remove:
+	drm_panel_remove(&acx->panel);
+	return ret;
+}
+
+static int acx424akp_remove(struct mipi_dsi_device *dsi)
+{
+	struct acx424akp *acx = mipi_dsi_get_drvdata(dsi);
+
+	mipi_dsi_detach(dsi);
+	drm_panel_remove(&acx->panel);
+
+	return 0;
+}
+
+static const struct of_device_id acx424akp_of_match[] = {
+	{ .compatible = "sony,acx424akp" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, acx424akp_of_match);
+
+static struct mipi_dsi_driver acx424akp_driver = {
+	.probe = acx424akp_probe,
+	.remove = acx424akp_remove,
+	.driver = {
+		.name = "panel-sony-acx424akp",
+		.of_match_table = acx424akp_of_match,
+	},
+};
+module_mipi_dsi_driver(acx424akp_driver);
+
+MODULE_AUTHOR("Linus Wallei <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("MIPI-DSI Sony acx424akp Panel Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/video/mipi_display.h b/include/video/mipi_display.h
index cba57a678daf..cf99c6a519d5 100644
--- a/include/video/mipi_display.h
+++ b/include/video/mipi_display.h
@@ -125,6 +125,7 @@ enum {
 	MIPI_DCS_GET_CABC_MIN_BRIGHTNESS = 0x5F,	/* MIPI DCS 1.3 */
 	MIPI_DCS_READ_DDB_START		= 0xA1,
 	MIPI_DCS_READ_DDB_CONTINUE	= 0xA8,
+	MIPI_DSI_DCS_SET_MDDI		= 0xAE,
 };
 
 /* MIPI DCS pixel formats */