@@ -7,6 +7,7 @@
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/platform_device.h>
#include <drm/bridge/dw_hdmi.h>
#include <drm/drm_edid.h>
@@ -22,6 +23,10 @@
#define DRIVER_NAME "dw-hdmi-ahb-audio"
+static unsigned int hw_buffer_size = 128 * 1024;
+module_param_named(buffer_size, hw_buffer_size, uint, 0444);
+MODULE_PARM_DESC(buffer_size, "Hardware buffer size to preallocate");
+
/* Provide some bits rather than bit offsets */
enum {
HDMI_AHB_DMA_CONF0_SW_FIFO_RST = BIT(7),
@@ -119,6 +124,7 @@ struct snd_dw_hdmi {
spinlock_t lock;
struct dw_hdmi_audio_data data;
struct snd_pcm_substream *substream;
+ struct snd_dma_buffer hw_buffer;
void (*reformat)(struct snd_dw_hdmi *, size_t, size_t);
void *buf_src;
void *buf_dst;
@@ -339,8 +345,8 @@ static int dw_hdmi_open(struct snd_pcm_substream *substream)
/* Limit the buffer size to the size of the preallocated buffer */
ret = snd_pcm_hw_constraint_minmax(runtime,
- SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
- 0, substream->dma_buffer.bytes);
+ SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
+ 0, dw->hw_buffer.bytes);
if (ret < 0)
return ret;
@@ -382,19 +388,6 @@ static int dw_hdmi_close(struct snd_pcm_substream *substream)
return 0;
}
-static int dw_hdmi_hw_free(struct snd_pcm_substream *substream)
-{
- return snd_pcm_lib_free_vmalloc_buffer(substream);
-}
-
-static int dw_hdmi_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- /* Allocate the PCM runtime buffer, which is exposed to userspace. */
- return snd_pcm_lib_alloc_vmalloc_buffer(substream,
- params_buffer_bytes(params));
-}
-
static int dw_hdmi_prepare(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
@@ -449,8 +442,8 @@ static int dw_hdmi_prepare(struct snd_pcm_substream *substream)
dw->iec_offset = 0;
dw->channels = runtime->channels;
dw->buf_src = runtime->dma_area;
- dw->buf_dst = substream->dma_buffer.area;
- dw->buf_addr = substream->dma_buffer.addr;
+ dw->buf_dst = dw->hw_buffer.area;
+ dw->buf_addr = dw->hw_buffer.addr;
dw->buf_period = snd_pcm_lib_period_bytes(substream);
dw->buf_size = snd_pcm_lib_buffer_bytes(substream);
@@ -506,14 +499,19 @@ static const struct snd_pcm_ops snd_dw_hdmi_ops = {
.open = dw_hdmi_open,
.close = dw_hdmi_close,
.ioctl = snd_pcm_lib_ioctl,
- .hw_params = dw_hdmi_hw_params,
- .hw_free = dw_hdmi_hw_free,
.prepare = dw_hdmi_prepare,
.trigger = dw_hdmi_trigger,
.pointer = dw_hdmi_pointer,
- .page = snd_pcm_lib_get_vmalloc_page,
};
+static void snd_dw_hdmi_free(struct snd_card *card)
+{
+ struct snd_dw_hdmi *dw = card->private_data;
+
+ if (dw->hw_buffer.bytes)
+ snd_dma_free_pages(&dw->hw_buffer);
+}
+
static int snd_dw_hdmi_probe(struct platform_device *pdev)
{
const struct dw_hdmi_audio_data *data = pdev->dev.platform_data;
@@ -548,6 +546,7 @@ static int snd_dw_hdmi_probe(struct platform_device *pdev)
dw->card = card;
dw->data = *data;
dw->revision = revision;
+ card->private_free = snd_dw_hdmi_free;
spin_lock_init(&dw->lock);
@@ -559,13 +558,18 @@ static int snd_dw_hdmi_probe(struct platform_device *pdev)
pcm->private_data = dw;
strlcpy(pcm->name, DRIVER_NAME, sizeof(pcm->name));
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_dw_hdmi_ops);
+ snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_VMALLOC, dev, 0, 0);
/*
* To support 8-channel 96kHz audio reliably, we need 512k
* to satisfy alsa with our restricted period (ERR004323).
*/
- snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
- dev, 128 * 1024, 1024 * 1024);
+ if (hw_buffer_size > 1024 * 1024)
+ hw_buffer_size = 1024 * 1024;
+ ret = snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV, dev,
+ hw_buffer_size, &dw->hw_buffer);
+ if (ret < 0)
+ goto err;
ret = snd_card_register(card);
if (ret < 0)
The driver manages actually two different buffers: the internal buffer that is pre-allocated at the probe time and the vmalloc buffer for PCM streams allocated at each stream open time. The problem of the current code is that the PCM core rather expects other way round, i.e. the the vmalloc buffer is declared as preallocator (although not actually pre-allocating pages at the probe time). Then the whole rest buffer allocation and release can be managed inside PCM core and we can drop the allocation/free call in the driver. For achieving that, this patch changes the buffer management in the following way: - The intermediate buffer is allocated manually instead of snd_pcm_lib_preallocate*() helper, kept in the own record, released in the card private_free call - The size of internal buffer is specified by the new module option, buffer_size - The normal stream buffer is set up via the new snd_pcm_set_managed_buffer*() helper - The hw_params and hw_free callbacks are removed as they become superfluous with the new API Also the hw_constraint call is corrected to point to the right unit (bytes) instead of the frame size. Signed-off-by: Takashi Iwai <tiwai@suse.de> --- .../gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c | 48 ++++++++++++---------- 1 file changed, 26 insertions(+), 22 deletions(-)