| Message ID | 20191224140551.21227-3-miquel.raynal@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2,1/3] dt-bindings: Add vendor prefix for Satoz | expand |
Hello, Miquel Raynal <miquel.raynal@bootlin.com> wrote on Tue, 24 Dec 2019 15:05:51 +0100: > Add support for the Satoz SAT050AT40H12R2 RGB panel. > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> > --- > > Changes since v1: > * Switched to display_timing's instead of display_mode. > > drivers/gpu/drm/panel/panel-simple.c | 28 ++++++++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c > index ac6f6b5d200d..00538553a188 100644 > --- a/drivers/gpu/drm/panel/panel-simple.c > +++ b/drivers/gpu/drm/panel/panel-simple.c > @@ -2559,6 +2559,31 @@ static const struct panel_desc samsung_ltn140at29_301 = { > }, > }; > > +static const struct display_timing satoz_sat050at40h12r2_timing = { > + .pixelclock = { 33300000, 33300000, 50000000 }, > + .hactive = {800, 800, 800}, > + .hfront_porch = {16, 210, 354}, > + .hback_porch = {46, 46, 46}, > + .hsync_len = {1, 1, 40}, > + .vactive = {480, 480, 480}, > + .vfront_porch = {7, 22, 147}, > + .vback_porch = {23, 23, 23}, > + .vsync_len = {1, 1, 20}, > +}; > + > +static const struct panel_desc satoz_sat050at40h12r2 = { > + .timings = &satoz_sat050at40h12r2_timing, > + .num_timings = 1, > + .bpc = 8, > + .size = { > + .width = 108, > + .height = 65, > + }, > + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, > + .reset_time = 10, > + .reset_wait = 1, I dit not generate the patch from the right branch: this is a proposal for the reset GPIO change and should not appear here. Please forget about this series, I will respin a v3 without these two lines. Sorry for the noise. Thanks, Miquèl
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index ac6f6b5d200d..00538553a188 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -2559,6 +2559,31 @@ static const struct panel_desc samsung_ltn140at29_301 = { }, }; +static const struct display_timing satoz_sat050at40h12r2_timing = { + .pixelclock = { 33300000, 33300000, 50000000 }, + .hactive = {800, 800, 800}, + .hfront_porch = {16, 210, 354}, + .hback_porch = {46, 46, 46}, + .hsync_len = {1, 1, 40}, + .vactive = {480, 480, 480}, + .vfront_porch = {7, 22, 147}, + .vback_porch = {23, 23, 23}, + .vsync_len = {1, 1, 20}, +}; + +static const struct panel_desc satoz_sat050at40h12r2 = { + .timings = &satoz_sat050at40h12r2_timing, + .num_timings = 1, + .bpc = 8, + .size = { + .width = 108, + .height = 65, + }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, + .reset_time = 10, + .reset_wait = 1, +}; + static const struct drm_display_mode sharp_ld_d5116z01b_mode = { .clock = 168480, .hdisplay = 1920, @@ -3354,6 +3379,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "samsung,ltn140at29-301", .data = &samsung_ltn140at29_301, + }, { + .compatible = "satoz,sat050at40h12r2", + .data = &satoz_sat050at40h12r2, }, { .compatible = "sharp,ld-d5116z01b", .data = &sharp_ld_d5116z01b,
Add support for the Satoz SAT050AT40H12R2 RGB panel. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- Changes since v1: * Switched to display_timing's instead of display_mode. drivers/gpu/drm/panel/panel-simple.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)