[v2,11/36] dt-bindings: display: convert innolux, p120zdg-bf1 to DT Schema

Commit Message

Sam Ravnborg April 8, 2020, 7:50 p.m. UTC

Signed-off-by: Sam Ravnborg <[e-mail]>
Reviewed-by: Douglas Anderson <[e-mail]>
Cc: Douglas Anderson <[e-mail]>
Cc: Sandeep Panda <[e-mail]>
Cc: Thierry Reding <[e-mail]>
Cc: Sam Ravnborg <[e-mail]>
---
 .../display/panel/innolux,p120zdg-bf1.txt     | 22 ----------
 .../display/panel/innolux,p120zdg-bf1.yaml    | 43 +++++++++++++++++++
 2 files changed, 43 insertions(+), 22 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt
 create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.yaml

Comments

Rob Herring (Arm) April 14, 2020, 6:30 p.m. UTC | #1

On Wed,  8 Apr 2020 21:50:44 +0200, Sam Ravnborg wrote:
> Signed-off-by: Sam Ravnborg <[e-mail]>
> Reviewed-by: Douglas Anderson <[e-mail]>
> Cc: Douglas Anderson <[e-mail]>
> Cc: Sandeep Panda <[e-mail]>
> Cc: Thierry Reding <[e-mail]>
> Cc: Sam Ravnborg <[e-mail]>
> ---
>  .../display/panel/innolux,p120zdg-bf1.txt     | 22 ----------
>  .../display/panel/innolux,p120zdg-bf1.yaml    | 43 +++++++++++++++++++
>  2 files changed, 43 insertions(+), 22 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt
>  create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.yaml
> 

Reviewed-by: Rob Herring <[e-mail]>

Patch

diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt
deleted file mode 100644
index 513f03466aba..000000000000
--- a/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt
+++ /dev/null
@@ -1,22 +0,0 @@ 
-Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
-
-Required properties:
-- compatible: should be "innolux,p120zdg-bf1"
-- power-supply: regulator to provide the supply voltage
-
-Optional properties:
-- enable-gpios: GPIO pin to enable or disable the panel
-- backlight: phandle of the backlight device attached to the panel
-- no-hpd: If HPD isn't hooked up; add this property.
-
-Example:
-	panel_edp: panel-edp {
-		compatible = "innolux,p120zdg-bf1";
-		enable-gpios = <&msmgpio 31 GPIO_ACTIVE_LOW>;
-		power-supply = <&pm8916_l2>;
-		backlight = <&backlight>;
-		no-hpd;
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.yaml b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.yaml
new file mode 100644
index 000000000000..42f97b7b86b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.yaml
@@ -0,0 +1,43 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/innolux,p120zdg-bf1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel
+
+maintainers:
+  - Sandeep Panda <[e-mail]>
+  - Douglas Anderson <[e-mail]>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: innolux,p120zdg-bf1
+
+  enable-gpios: true
+  power-supply: true
+  backlight: true
+  no-hpd: true
+
+required:
+  - compatible
+  - power-supply
+        
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    panel_edp: panel-edp {
+        compatible = "innolux,p120zdg-bf1";
+        enable-gpios = <&msmgpio 31 GPIO_ACTIVE_LOW>;
+        power-supply = <&pm8916_l2>;
+        backlight = <&backlight>;
+        no-hpd;
+    };
+
+...