deleted file mode 100644
@@ -1,42 +0,0 @@
-King Display KD035G6-54NT 3.5" (320x240 pixels) 24-bit TFT LCD panel
-
-Required properties:
-- compatible: should be "kingdisplay,kd035g6-54nt"
-- power-supply: See panel-common.txt
-- reset-gpios: See panel-common.txt
-
-Optional properties:
-- backlight: see panel-common.txt
-
-The generic bindings for the SPI slaves documented in [1] also apply.
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in [2]. This
-node should describe panel's video bus.
-
-[1]: Documentation/devicetree/bindings/spi/spi-bus.txt
-[2]: Documentation/devicetree/bindings/graph.txt
-
-Example:
-
-&spi {
- panel@0 {
- compatible = "kingdisplay,kd035g6-54nt";
- reg = <0>;
-
- spi-max-frequency = <3125000>;
- spi-3wire;
- spi-cs-high;
-
- reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
-
- backlight = <&backlight>;
- power-supply = <&ldo6>;
-
- port {
- panel_input: endpoint {
- remote-endpoint = <&panel_output>;
- };
- };
- };
-};
new file mode 100644
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/kingdisplay,kd035g6-54nt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: King Display KD035G6-54NT 3.5" (320x240 pixels) 24-bit TFT LCD panel
+
+description: |
+ The panel must obey the rules for a SPI slave device as specified in
+ spi/spi-controller.yaml
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: kingdisplay,kd035g6-54nt
+
+ backlight: true
+ port: true
+ power-supply: true
+ reg: true
+ reset-gpios: true
+
+required:
+ - compatible
+ - power-supply
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "kingdisplay,kd035g6-54nt";
+ reg = <0>;
+
+ spi-max-frequency = <3125000>;
+ spi-3wire;
+ spi-cs-high;
+
+ reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+ backlight = <&backlight>;
+ power-supply = <&ldo6>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+ };
+
+...