| Message ID | 20200408195109.32692-24-sam@ravnborg.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings: display: convert remaning panel bindings to DT Schema | expand |
On Wed, Apr 08, 2020 at 09:50:56PM +0200, Sam Ravnborg wrote: > Signed-off-by: Sam Ravnborg <sam@ravnborg.org> > Cc: Andrzej Hajda <a.hajda@samsung.com> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > --- > .../display/panel/samsung,s6e8aa0.txt | 56 ----------- > .../display/panel/samsung,s6e8aa0.yaml | 96 +++++++++++++++++++ > 2 files changed, 96 insertions(+), 56 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt > create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml > > diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt > deleted file mode 100644 > index 9e766c5f86da..000000000000 > --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt > +++ /dev/null > @@ -1,56 +0,0 @@ > -Samsung S6E8AA0 AMOLED LCD 5.3 inch panel > - > -Required properties: > - - compatible: "samsung,s6e8aa0" > - - reg: the virtual channel number of a DSI peripheral > - - vdd3-supply: core voltage supply > - - vci-supply: voltage supply for analog circuits > - - reset-gpios: a GPIO spec for the reset pin > - - display-timings: timings for the connected panel as described by [1] > - > -Optional properties: > - - power-on-delay: delay after turning regulators on [ms] > - - reset-delay: delay after reset sequence [ms] > - - init-delay: delay after initialization sequence [ms] > - - panel-width-mm: physical panel width [mm] > - - panel-height-mm: physical panel height [mm] > - - flip-horizontal: boolean to flip image horizontally > - - flip-vertical: boolean to flip image vertically > - > -The device node can contain one 'port' child node with one child > -'endpoint' node, according to the bindings defined in [2]. This > -node should describe panel's video bus. > - > -[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt > -[2]: Documentation/devicetree/bindings/media/video-interfaces.txt > - > -Example: > - > - panel { > - compatible = "samsung,s6e8aa0"; > - reg = <0>; > - vdd3-supply = <&vcclcd_reg>; > - vci-supply = <&vlcd_reg>; > - reset-gpios = <&gpy4 5 0>; > - power-on-delay= <50>; > - reset-delay = <100>; > - init-delay = <100>; > - panel-width-mm = <58>; > - panel-height-mm = <103>; > - flip-horizontal; > - flip-vertical; > - > - display-timings { > - timing0: timing-0 { > - clock-frequency = <57153600>; > - hactive = <720>; > - vactive = <1280>; > - hfront-porch = <5>; > - hback-porch = <5>; > - hsync-len = <5>; > - vfront-porch = <13>; > - vback-porch = <1>; > - vsync-len = <2>; > - }; > - }; > - }; > diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml > new file mode 100644 > index 000000000000..67c99b0492e5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml > @@ -0,0 +1,96 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/panel/samsung,s6e8aa0.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Samsung S6E8AA0 AMOLED LCD 5.3 inch panel > + > +maintainers: > + - Andrzej Hajda <a.hajda@samsung.com> > + > +allOf: > + - $ref: panel-common.yaml# > + > +properties: > + compatible: > + const: samsung,s6e8aa0 > + > + reg: true > + reset-gpios: true > + display-timings: true > + > + vdd3-supply: > + description: core voltage supply > + > + vci-supply: > + description: voltage supply for analog circuits > + > + power-on-delay: > + description: delay after turning regulators on [ms] > + > + reset-delay: > + description: delay after reset sequence [ms] Needs a type ref. > + > + init-delay: > + description: delay after initialization sequence [ms] Same here. > + > + panel-width-mm: > + description: physical panel width [mm] > + > + panel-height-mm: > + description: physical panel height [mm] > + > + flip-horizontal: > + description: boolean to flip image horizontally type: boolean > + > + flip-vertical: > + description: boolean to flip image vertically type: boolean > + > +required: > + - compatible > + - reg > + - vdd3-supply > + - vci-supply > + - reset-gpios > + - display-timings > + > +additionalProperties: false > + > +examples: > + - | > + dsi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + panel { panel@0 > + compatible = "samsung,s6e8aa0"; > + reg = <0>; > + vdd3-supply = <&vcclcd_reg>; > + vci-supply = <&vlcd_reg>; > + reset-gpios = <&gpy4 5 0>; > + power-on-delay= <50>; > + reset-delay = <100>; > + init-delay = <100>; > + panel-width-mm = <58>; > + panel-height-mm = <103>; > + flip-horizontal; > + flip-vertical; > + > + display-timings { > + timing0: timing-0 { > + clock-frequency = <57153600>; > + hactive = <720>; > + vactive = <1280>; > + hfront-porch = <5>; > + hback-porch = <5>; > + hsync-len = <5>; > + vfront-porch = <13>; > + vback-porch = <1>; > + vsync-len = <2>; > + }; > + }; > + }; > + }; > + > +... > -- > 2.20.1 >
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt deleted file mode 100644 index 9e766c5f86da..000000000000 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt +++ /dev/null @@ -1,56 +0,0 @@ -Samsung S6E8AA0 AMOLED LCD 5.3 inch panel - -Required properties: - - compatible: "samsung,s6e8aa0" - - reg: the virtual channel number of a DSI peripheral - - vdd3-supply: core voltage supply - - vci-supply: voltage supply for analog circuits - - reset-gpios: a GPIO spec for the reset pin - - display-timings: timings for the connected panel as described by [1] - -Optional properties: - - power-on-delay: delay after turning regulators on [ms] - - reset-delay: delay after reset sequence [ms] - - init-delay: delay after initialization sequence [ms] - - panel-width-mm: physical panel width [mm] - - panel-height-mm: physical panel height [mm] - - flip-horizontal: boolean to flip image horizontally - - flip-vertical: boolean to flip image vertically - -The device node can contain one 'port' child node with one child -'endpoint' node, according to the bindings defined in [2]. This -node should describe panel's video bus. - -[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt -[2]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - - panel { - compatible = "samsung,s6e8aa0"; - reg = <0>; - vdd3-supply = <&vcclcd_reg>; - vci-supply = <&vlcd_reg>; - reset-gpios = <&gpy4 5 0>; - power-on-delay= <50>; - reset-delay = <100>; - init-delay = <100>; - panel-width-mm = <58>; - panel-height-mm = <103>; - flip-horizontal; - flip-vertical; - - display-timings { - timing0: timing-0 { - clock-frequency = <57153600>; - hactive = <720>; - vactive = <1280>; - hfront-porch = <5>; - hback-porch = <5>; - hsync-len = <5>; - vfront-porch = <13>; - vback-porch = <1>; - vsync-len = <2>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml new file mode 100644 index 000000000000..67c99b0492e5 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6e8aa0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S6E8AA0 AMOLED LCD 5.3 inch panel + +maintainers: + - Andrzej Hajda <a.hajda@samsung.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: samsung,s6e8aa0 + + reg: true + reset-gpios: true + display-timings: true + + vdd3-supply: + description: core voltage supply + + vci-supply: + description: voltage supply for analog circuits + + power-on-delay: + description: delay after turning regulators on [ms] + + reset-delay: + description: delay after reset sequence [ms] + + init-delay: + description: delay after initialization sequence [ms] + + panel-width-mm: + description: physical panel width [mm] + + panel-height-mm: + description: physical panel height [mm] + + flip-horizontal: + description: boolean to flip image horizontally + + flip-vertical: + description: boolean to flip image vertically + +required: + - compatible + - reg + - vdd3-supply + - vci-supply + - reset-gpios + - display-timings + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel { + compatible = "samsung,s6e8aa0"; + reg = <0>; + vdd3-supply = <&vcclcd_reg>; + vci-supply = <&vlcd_reg>; + reset-gpios = <&gpy4 5 0>; + power-on-delay= <50>; + reset-delay = <100>; + init-delay = <100>; + panel-width-mm = <58>; + panel-height-mm = <103>; + flip-horizontal; + flip-vertical; + + display-timings { + timing0: timing-0 { + clock-frequency = <57153600>; + hactive = <720>; + vactive = <1280>; + hfront-porch = <5>; + hback-porch = <5>; + hsync-len = <5>; + vfront-porch = <13>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; + }; + }; + +...
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> --- .../display/panel/samsung,s6e8aa0.txt | 56 ----------- .../display/panel/samsung,s6e8aa0.yaml | 96 +++++++++++++++++++ 2 files changed, 96 insertions(+), 56 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml