diff mbox series

[v4,4/6] dt-bindings: drm/bridge: ti-sn65dsi86: Convert to yaml

Message ID 20200430124442.v4.4.Ifcdc4ecb12742a27862744ee1e8753cb95a38a7f@changeid (mailing list archive)
State New, archived
Headers show
Series drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect | expand

Commit Message

Doug Anderson April 30, 2020, 7:46 p.m. UTC
This moves the bindings over, based a lot on toshiba,tc358768.yaml.
Unless there's someone known to be better, I've set the maintainer in
the yaml as the first person to submit bindings.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---

Changes in v4: None
Changes in v3: None
Changes in v2:
- specification => specifier.
- power up => power.
- Added back missing suspend-gpios.
- data-lanes and lane-polarities are are the right place now.
- endpoints don't need to be patternProperties.
- Specified more details for data-lanes and lane-polarities.
- Added old example back in, fixing bugs in it.
- Example i2c bus is just called "i2c", not "i2c1" now.

 .../bindings/display/bridge/ti,sn65dsi86.txt  |  87 ------
 .../bindings/display/bridge/ti,sn65dsi86.yaml | 279 ++++++++++++++++++
 2 files changed, 279 insertions(+), 87 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
 create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml

Comments

Laurent Pinchart May 5, 2020, 9:34 p.m. UTC | #1
Hi Doug,

Thank you for the patch.

On Thu, Apr 30, 2020 at 12:46:15PM -0700, Douglas Anderson wrote:
> This moves the bindings over, based a lot on toshiba,tc358768.yaml.
> Unless there's someone known to be better, I've set the maintainer in
> the yaml as the first person to submit bindings.
> 
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
> ---
> 
> Changes in v4: None
> Changes in v3: None
> Changes in v2:
> - specification => specifier.
> - power up => power.
> - Added back missing suspend-gpios.
> - data-lanes and lane-polarities are are the right place now.
> - endpoints don't need to be patternProperties.
> - Specified more details for data-lanes and lane-polarities.
> - Added old example back in, fixing bugs in it.
> - Example i2c bus is just called "i2c", not "i2c1" now.
> 
>  .../bindings/display/bridge/ti,sn65dsi86.txt  |  87 ------
>  .../bindings/display/bridge/ti,sn65dsi86.yaml | 279 ++++++++++++++++++
>  2 files changed, 279 insertions(+), 87 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
> deleted file mode 100644
> index 8ec4a7f2623a..000000000000
> --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
> +++ /dev/null
> @@ -1,87 +0,0 @@
> -SN65DSI86 DSI to eDP bridge chip
> ---------------------------------
> -
> -This is the binding for Texas Instruments SN65DSI86 bridge.
> -http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
> -
> -Required properties:
> -- compatible: Must be "ti,sn65dsi86"
> -- reg: i2c address of the chip, 0x2d as per datasheet
> -- enable-gpios: gpio specification for bridge_en pin (active high)
> -
> -- vccio-supply: A 1.8V supply that powers up the digital IOs.
> -- vpll-supply: A 1.8V supply that powers up the displayport PLL.
> -- vcca-supply: A 1.2V supply that powers up the analog circuits.
> -- vcc-supply: A 1.2V supply that powers up the digital core.
> -
> -Optional properties:
> -- interrupts-extended: Specifier for the SN65DSI86 interrupt line.
> -
> -- gpio-controller: Marks the device has a GPIO controller.
> -- #gpio-cells    : Should be two. The first cell is the pin number and
> -                   the second cell is used to specify flags.
> -                   See ../../gpio/gpio.txt for more information.
> -- #pwm-cells : Should be one. See ../../pwm/pwm.yaml for description of
> -               the cell formats.
> -
> -- clock-names: should be "refclk"
> -- clocks: Specification for input reference clock. The reference
> -	  clock rate must be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz.
> -
> -- data-lanes: See ../../media/video-interface.txt
> -- lane-polarities: See ../../media/video-interface.txt
> -
> -- suspend-gpios: specification for GPIO1 pin on bridge (active low)
> -
> -Required nodes:
> -This device has two video ports. Their connections are modelled using the
> -OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> -
> -- Video port 0 for DSI input
> -- Video port 1 for eDP output
> -
> -Example
> --------
> -
> -edp-bridge@2d {
> -	compatible = "ti,sn65dsi86";
> -	#address-cells = <1>;
> -	#size-cells = <0>;
> -	reg = <0x2d>;
> -
> -	enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>;
> -	suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>;
> -
> -	interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
> -
> -	vccio-supply = <&pm8916_l17>;
> -	vcca-supply = <&pm8916_l6>;
> -	vpll-supply = <&pm8916_l17>;
> -	vcc-supply = <&pm8916_l6>;
> -
> -	clock-names = "refclk";
> -	clocks = <&input_refclk>;
> -
> -	ports {
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		port@0 {
> -			reg = <0>;
> -
> -			edp_bridge_in: endpoint {
> -				remote-endpoint = <&dsi_out>;
> -			};
> -		};
> -
> -		port@1 {
> -			reg = <1>;
> -
> -			edp_bridge_out: endpoint {
> -				data-lanes = <2 1 3 0>;
> -				lane-polarities = <0 1 0 1>;
> -				remote-endpoint = <&edp_panel_in>;
> -			};
> -		};
> -	};
> -}
> diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
> new file mode 100644
> index 000000000000..6d7d40ad45ac
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
> @@ -0,0 +1,279 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SN65DSI86 DSI to eDP bridge chip
> +
> +maintainers:
> +  - Sandeep Panda <spanda@codeaurora.org>
> +
> +description: |
> +  The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP.
> +  http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
> +
> +properties:
> +  compatible:
> +    const: ti,sn65dsi86
> +
> +  reg:
> +    const: 0x2d
> +
> +  enable-gpios:
> +    maxItems: 1
> +    description: GPIO specifier for bridge_en pin (active high).
> +
> +  suspend-gpios:
> +    maxItems: 1
> +    description: GPIO specifier for GPIO1 pin on bridge (active low).
> +
> +  vccio-supply:
> +    description: A 1.8V supply that powers the digital IOs.
> +
> +  vpll-supply:
> +    description: A 1.8V supply that powers the DisplayPort PLL.
> +
> +  vcca-supply:
> +    description: A 1.2V supply that powers the analog circuits.
> +
> +  vcc-supply:
> +    description: A 1.2V supply that powers the digital core.
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +    description:
> +      Clock specifier for input reference clock. The reference clock rate must
> +      be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz.
> +
> +  clock-names:
> +    const: refclk
> +
> +  gpio-controller: true
> +  '#gpio-cells':
> +    const: 2
> +    description:
> +      First cell is pin number, second cell is flags.  GPIO pin numbers are
> +      1-based to match the datasheet.  See ../../gpio/gpio.txt for more
> +      information.
> +
> +  '#pwm-cells':
> +    const: 1
> +    description: See ../../pwm/pwm.yaml for description of the cell formats.
> +
> +  ports:
> +    type: object

Maybe

    additionalProperties: false

here ?

> +
> +    properties:
> +      "#address-cells":
> +        const: 1
> +
> +      "#size-cells":
> +        const: 0
> +
> +      port@0:
> +        type: object
> +        additionalProperties: false
> +
> +        description:
> +          Video port for MIPI DSI input
> +
> +        properties:
> +          reg:
> +            const: 0
> +
> +          endpoint:
> +            type: object
> +            additionalProperties: false
> +
> +            properties:
> +              remote-endpoint: true
> +
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +                items:
> +                  enum:
> +                    - 0
> +                    - 1
> +                    - 2
> +                    - 3
> +                description: See ../../media/video-interface.txt

And maybe
                uniqueItems: true

? Same for port@1.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +
> +              lane-polarities:
> +                minItems: 1
> +                maxItems: 4
> +                items:
> +                  enum:
> +                    - 0
> +                    - 1
> +                description: See ../../media/video-interface.txt
> +
> +            dependencies:
> +              data-lanes: [lane-polarities]
> +
> +        required:
> +          - reg
> +
> +      port@1:
> +        type: object
> +        additionalProperties: false
> +
> +        description:
> +          Video port for eDP output (panel or connector).
> +
> +        properties:
> +          reg:
> +            const: 1
> +
> +          endpoint:
> +            type: object
> +            additionalProperties: false
> +
> +            properties:
> +              remote-endpoint: true
> +
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +                items:
> +                  enum:
> +                    - 0
> +                    - 1
> +                    - 2
> +                    - 3
> +                description: See ../../media/video-interface.txt
> +
> +              lane-polarities:
> +                minItems: 1
> +                maxItems: 4
> +                items:
> +                  enum:
> +                    - 0
> +                    - 1
> +                description: See ../../media/video-interface.txt
> +
> +            dependencies:
> +              data-lanes: [lane-polarities]
> +
> +        required:
> +          - reg
> +
> +    required:
> +      - "#address-cells"
> +      - "#size-cells"
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - enable-gpios
> +  - vccio-supply
> +  - vpll-supply
> +  - vcca-supply
> +  - vcc-supply
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,rpmh.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      bridge@2d {
> +        compatible = "ti,sn65dsi86";
> +        reg = <0x2d>;
> +
> +        interrupt-parent = <&tlmm>;
> +        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
> +
> +        enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
> +
> +        vpll-supply = <&src_pp1800_s4a>;
> +        vccio-supply = <&src_pp1800_s4a>;
> +        vcca-supply = <&src_pp1200_l2a>;
> +        vcc-supply = <&src_pp1200_l2a>;
> +
> +        clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
> +        clock-names = "refclk";
> +
> +        ports {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          port@0 {
> +            reg = <0>;
> +            endpoint {
> +              remote-endpoint = <&dsi0_out>;
> +            };
> +          };
> +
> +          port@1 {
> +            reg = <1>;
> +            endpoint {
> +              remote-endpoint = <&panel_in_edp>;
> +            };
> +          };
> +        };
> +      };
> +    };
> +  - |
> +    #include <dt-bindings/clock/qcom,rpmh.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      bridge@2d {
> +        compatible = "ti,sn65dsi86";
> +        reg = <0x2d>;
> +
> +        enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>;
> +        suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>;
> +
> +        interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
> +
> +        vccio-supply = <&pm8916_l17>;
> +        vcca-supply = <&pm8916_l6>;
> +        vpll-supply = <&pm8916_l17>;
> +        vcc-supply = <&pm8916_l6>;
> +
> +        clock-names = "refclk";
> +        clocks = <&input_refclk>;
> +
> +        ports {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          port@0 {
> +            reg = <0>;
> +
> +            edp_bridge_in: endpoint {
> +              remote-endpoint = <&dsi_out>;
> +            };
> +          };
> +
> +          port@1 {
> +            reg = <1>;
> +
> +            edp_bridge_out: endpoint {
> +              data-lanes = <2 1 3 0>;
> +              lane-polarities = <0 1 0 1>;
> +              remote-endpoint = <&edp_panel_in>;
> +            };
> +          };
> +        };
> +      };
> +    };
Doug Anderson May 5, 2020, 10:21 p.m. UTC | #2
Laurent,

On Tue, May 5, 2020 at 2:35 PM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Doug,
>
> Thank you for the patch.
>
> On Thu, Apr 30, 2020 at 12:46:15PM -0700, Douglas Anderson wrote:
> > This moves the bindings over, based a lot on toshiba,tc358768.yaml.
> > Unless there's someone known to be better, I've set the maintainer in
> > the yaml as the first person to submit bindings.
> >
> > Signed-off-by: Douglas Anderson <dianders@chromium.org>
> > Reviewed-by: Stephen Boyd <swboyd@chromium.org>
> > ---
> >
> > Changes in v4: None
> > Changes in v3: None
> > Changes in v2:
> > - specification => specifier.
> > - power up => power.
> > - Added back missing suspend-gpios.
> > - data-lanes and lane-polarities are are the right place now.
> > - endpoints don't need to be patternProperties.
> > - Specified more details for data-lanes and lane-polarities.
> > - Added old example back in, fixing bugs in it.
> > - Example i2c bus is just called "i2c", not "i2c1" now.
> >
> >  .../bindings/display/bridge/ti,sn65dsi86.txt  |  87 ------
> >  .../bindings/display/bridge/ti,sn65dsi86.yaml | 279 ++++++++++++++++++
> >  2 files changed, 279 insertions(+), 87 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
> >  create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
> > deleted file mode 100644
> > index 8ec4a7f2623a..000000000000
> > --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
> > +++ /dev/null
> > @@ -1,87 +0,0 @@
> > -SN65DSI86 DSI to eDP bridge chip
> > ---------------------------------
> > -
> > -This is the binding for Texas Instruments SN65DSI86 bridge.
> > -http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
> > -
> > -Required properties:
> > -- compatible: Must be "ti,sn65dsi86"
> > -- reg: i2c address of the chip, 0x2d as per datasheet
> > -- enable-gpios: gpio specification for bridge_en pin (active high)
> > -
> > -- vccio-supply: A 1.8V supply that powers up the digital IOs.
> > -- vpll-supply: A 1.8V supply that powers up the displayport PLL.
> > -- vcca-supply: A 1.2V supply that powers up the analog circuits.
> > -- vcc-supply: A 1.2V supply that powers up the digital core.
> > -
> > -Optional properties:
> > -- interrupts-extended: Specifier for the SN65DSI86 interrupt line.
> > -
> > -- gpio-controller: Marks the device has a GPIO controller.
> > -- #gpio-cells    : Should be two. The first cell is the pin number and
> > -                   the second cell is used to specify flags.
> > -                   See ../../gpio/gpio.txt for more information.
> > -- #pwm-cells : Should be one. See ../../pwm/pwm.yaml for description of
> > -               the cell formats.
> > -
> > -- clock-names: should be "refclk"
> > -- clocks: Specification for input reference clock. The reference
> > -       clock rate must be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz.
> > -
> > -- data-lanes: See ../../media/video-interface.txt
> > -- lane-polarities: See ../../media/video-interface.txt
> > -
> > -- suspend-gpios: specification for GPIO1 pin on bridge (active low)
> > -
> > -Required nodes:
> > -This device has two video ports. Their connections are modelled using the
> > -OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> > -
> > -- Video port 0 for DSI input
> > -- Video port 1 for eDP output
> > -
> > -Example
> > --------
> > -
> > -edp-bridge@2d {
> > -     compatible = "ti,sn65dsi86";
> > -     #address-cells = <1>;
> > -     #size-cells = <0>;
> > -     reg = <0x2d>;
> > -
> > -     enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>;
> > -     suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>;
> > -
> > -     interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
> > -
> > -     vccio-supply = <&pm8916_l17>;
> > -     vcca-supply = <&pm8916_l6>;
> > -     vpll-supply = <&pm8916_l17>;
> > -     vcc-supply = <&pm8916_l6>;
> > -
> > -     clock-names = "refclk";
> > -     clocks = <&input_refclk>;
> > -
> > -     ports {
> > -             #address-cells = <1>;
> > -             #size-cells = <0>;
> > -
> > -             port@0 {
> > -                     reg = <0>;
> > -
> > -                     edp_bridge_in: endpoint {
> > -                             remote-endpoint = <&dsi_out>;
> > -                     };
> > -             };
> > -
> > -             port@1 {
> > -                     reg = <1>;
> > -
> > -                     edp_bridge_out: endpoint {
> > -                             data-lanes = <2 1 3 0>;
> > -                             lane-polarities = <0 1 0 1>;
> > -                             remote-endpoint = <&edp_panel_in>;
> > -                     };
> > -             };
> > -     };
> > -}
> > diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
> > new file mode 100644
> > index 000000000000..6d7d40ad45ac
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
> > @@ -0,0 +1,279 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: SN65DSI86 DSI to eDP bridge chip
> > +
> > +maintainers:
> > +  - Sandeep Panda <spanda@codeaurora.org>
> > +
> > +description: |
> > +  The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP.
> > +  http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
> > +
> > +properties:
> > +  compatible:
> > +    const: ti,sn65dsi86
> > +
> > +  reg:
> > +    const: 0x2d
> > +
> > +  enable-gpios:
> > +    maxItems: 1
> > +    description: GPIO specifier for bridge_en pin (active high).
> > +
> > +  suspend-gpios:
> > +    maxItems: 1
> > +    description: GPIO specifier for GPIO1 pin on bridge (active low).
> > +
> > +  vccio-supply:
> > +    description: A 1.8V supply that powers the digital IOs.
> > +
> > +  vpll-supply:
> > +    description: A 1.8V supply that powers the DisplayPort PLL.
> > +
> > +  vcca-supply:
> > +    description: A 1.2V supply that powers the analog circuits.
> > +
> > +  vcc-supply:
> > +    description: A 1.2V supply that powers the digital core.
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +    description:
> > +      Clock specifier for input reference clock. The reference clock rate must
> > +      be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz.
> > +
> > +  clock-names:
> > +    const: refclk
> > +
> > +  gpio-controller: true
> > +  '#gpio-cells':
> > +    const: 2
> > +    description:
> > +      First cell is pin number, second cell is flags.  GPIO pin numbers are
> > +      1-based to match the datasheet.  See ../../gpio/gpio.txt for more
> > +      information.
> > +
> > +  '#pwm-cells':
> > +    const: 1
> > +    description: See ../../pwm/pwm.yaml for description of the cell formats.
> > +
> > +  ports:
> > +    type: object
>
> Maybe
>
>     additionalProperties: false
>
> here ?

Ah, this is to keep people from adding "additionalProperties" under
the ports node.  I will hold off on sending v5 for now.  If there
happens to be nothing else wrong I'm happy for this to be added by a
maintainer when landing or I can quickly spin a v5.


> > +
> > +    properties:
> > +      "#address-cells":
> > +        const: 1
> > +
> > +      "#size-cells":
> > +        const: 0
> > +
> > +      port@0:
> > +        type: object
> > +        additionalProperties: false
> > +
> > +        description:
> > +          Video port for MIPI DSI input
> > +
> > +        properties:
> > +          reg:
> > +            const: 0
> > +
> > +          endpoint:
> > +            type: object
> > +            additionalProperties: false
> > +
> > +            properties:
> > +              remote-endpoint: true
> > +
> > +              data-lanes:
> > +                minItems: 1
> > +                maxItems: 4
> > +                items:
> > +                  enum:
> > +                    - 0
> > +                    - 1
> > +                    - 2
> > +                    - 3
> > +                description: See ../../media/video-interface.txt
>
> And maybe
>                 uniqueItems: true
>
> ? Same for port@1.

Sounds good.  Again, I'll hold off on sending v5 for now and (if no
other problems) happy if this gets done when applied.


> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Thanks!

-Doug
Doug Anderson May 6, 2020, 9:05 p.m. UTC | #3
Hi,

On Tue, May 5, 2020 at 3:21 PM Doug Anderson <dianders@chromium.org> wrote:
>
> Laurent,
>
> On Tue, May 5, 2020 at 2:35 PM Laurent Pinchart
> <laurent.pinchart@ideasonboard.com> wrote:
> >
> > Hi Doug,
> >
> > Thank you for the patch.
> >
> > On Thu, Apr 30, 2020 at 12:46:15PM -0700, Douglas Anderson wrote:
> > > This moves the bindings over, based a lot on toshiba,tc358768.yaml.
> > > Unless there's someone known to be better, I've set the maintainer in
> > > the yaml as the first person to submit bindings.
> > >
> > > Signed-off-by: Douglas Anderson <dianders@chromium.org>
> > > Reviewed-by: Stephen Boyd <swboyd@chromium.org>
> > > ---
> > >
> > > Changes in v4: None
> > > Changes in v3: None
> > > Changes in v2:
> > > - specification => specifier.
> > > - power up => power.
> > > - Added back missing suspend-gpios.
> > > - data-lanes and lane-polarities are are the right place now.
> > > - endpoints don't need to be patternProperties.
> > > - Specified more details for data-lanes and lane-polarities.
> > > - Added old example back in, fixing bugs in it.
> > > - Example i2c bus is just called "i2c", not "i2c1" now.
> > >
> > >  .../bindings/display/bridge/ti,sn65dsi86.txt  |  87 ------
> > >  .../bindings/display/bridge/ti,sn65dsi86.yaml | 279 ++++++++++++++++++
> > >  2 files changed, 279 insertions(+), 87 deletions(-)
> > >  delete mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
> > >  create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
> > > deleted file mode 100644
> > > index 8ec4a7f2623a..000000000000
> > > --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
> > > +++ /dev/null
> > > @@ -1,87 +0,0 @@
> > > -SN65DSI86 DSI to eDP bridge chip
> > > ---------------------------------
> > > -
> > > -This is the binding for Texas Instruments SN65DSI86 bridge.
> > > -http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
> > > -
> > > -Required properties:
> > > -- compatible: Must be "ti,sn65dsi86"
> > > -- reg: i2c address of the chip, 0x2d as per datasheet
> > > -- enable-gpios: gpio specification for bridge_en pin (active high)
> > > -
> > > -- vccio-supply: A 1.8V supply that powers up the digital IOs.
> > > -- vpll-supply: A 1.8V supply that powers up the displayport PLL.
> > > -- vcca-supply: A 1.2V supply that powers up the analog circuits.
> > > -- vcc-supply: A 1.2V supply that powers up the digital core.
> > > -
> > > -Optional properties:
> > > -- interrupts-extended: Specifier for the SN65DSI86 interrupt line.
> > > -
> > > -- gpio-controller: Marks the device has a GPIO controller.
> > > -- #gpio-cells    : Should be two. The first cell is the pin number and
> > > -                   the second cell is used to specify flags.
> > > -                   See ../../gpio/gpio.txt for more information.
> > > -- #pwm-cells : Should be one. See ../../pwm/pwm.yaml for description of
> > > -               the cell formats.
> > > -
> > > -- clock-names: should be "refclk"
> > > -- clocks: Specification for input reference clock. The reference
> > > -       clock rate must be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz.
> > > -
> > > -- data-lanes: See ../../media/video-interface.txt
> > > -- lane-polarities: See ../../media/video-interface.txt
> > > -
> > > -- suspend-gpios: specification for GPIO1 pin on bridge (active low)
> > > -
> > > -Required nodes:
> > > -This device has two video ports. Their connections are modelled using the
> > > -OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> > > -
> > > -- Video port 0 for DSI input
> > > -- Video port 1 for eDP output
> > > -
> > > -Example
> > > --------
> > > -
> > > -edp-bridge@2d {
> > > -     compatible = "ti,sn65dsi86";
> > > -     #address-cells = <1>;
> > > -     #size-cells = <0>;
> > > -     reg = <0x2d>;
> > > -
> > > -     enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>;
> > > -     suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>;
> > > -
> > > -     interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
> > > -
> > > -     vccio-supply = <&pm8916_l17>;
> > > -     vcca-supply = <&pm8916_l6>;
> > > -     vpll-supply = <&pm8916_l17>;
> > > -     vcc-supply = <&pm8916_l6>;
> > > -
> > > -     clock-names = "refclk";
> > > -     clocks = <&input_refclk>;
> > > -
> > > -     ports {
> > > -             #address-cells = <1>;
> > > -             #size-cells = <0>;
> > > -
> > > -             port@0 {
> > > -                     reg = <0>;
> > > -
> > > -                     edp_bridge_in: endpoint {
> > > -                             remote-endpoint = <&dsi_out>;
> > > -                     };
> > > -             };
> > > -
> > > -             port@1 {
> > > -                     reg = <1>;
> > > -
> > > -                     edp_bridge_out: endpoint {
> > > -                             data-lanes = <2 1 3 0>;
> > > -                             lane-polarities = <0 1 0 1>;
> > > -                             remote-endpoint = <&edp_panel_in>;
> > > -                     };
> > > -             };
> > > -     };
> > > -}
> > > diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
> > > new file mode 100644
> > > index 000000000000..6d7d40ad45ac
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
> > > @@ -0,0 +1,279 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: SN65DSI86 DSI to eDP bridge chip
> > > +
> > > +maintainers:
> > > +  - Sandeep Panda <spanda@codeaurora.org>
> > > +
> > > +description: |
> > > +  The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP.
> > > +  http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: ti,sn65dsi86
> > > +
> > > +  reg:
> > > +    const: 0x2d
> > > +
> > > +  enable-gpios:
> > > +    maxItems: 1
> > > +    description: GPIO specifier for bridge_en pin (active high).
> > > +
> > > +  suspend-gpios:
> > > +    maxItems: 1
> > > +    description: GPIO specifier for GPIO1 pin on bridge (active low).
> > > +
> > > +  vccio-supply:
> > > +    description: A 1.8V supply that powers the digital IOs.
> > > +
> > > +  vpll-supply:
> > > +    description: A 1.8V supply that powers the DisplayPort PLL.
> > > +
> > > +  vcca-supply:
> > > +    description: A 1.2V supply that powers the analog circuits.
> > > +
> > > +  vcc-supply:
> > > +    description: A 1.2V supply that powers the digital core.
> > > +
> > > +  interrupts:
> > > +    maxItems: 1
> > > +
> > > +  clocks:
> > > +    maxItems: 1
> > > +    description:
> > > +      Clock specifier for input reference clock. The reference clock rate must
> > > +      be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz.
> > > +
> > > +  clock-names:
> > > +    const: refclk
> > > +
> > > +  gpio-controller: true
> > > +  '#gpio-cells':
> > > +    const: 2
> > > +    description:
> > > +      First cell is pin number, second cell is flags.  GPIO pin numbers are
> > > +      1-based to match the datasheet.  See ../../gpio/gpio.txt for more
> > > +      information.
> > > +
> > > +  '#pwm-cells':
> > > +    const: 1
> > > +    description: See ../../pwm/pwm.yaml for description of the cell formats.
> > > +
> > > +  ports:
> > > +    type: object
> >
> > Maybe
> >
> >     additionalProperties: false
> >
> > here ?
>
> Ah, this is to keep people from adding "additionalProperties" under
> the ports node.  I will hold off on sending v5 for now.  If there
> happens to be nothing else wrong I'm happy for this to be added by a
> maintainer when landing or I can quickly spin a v5.
>
>
> > > +
> > > +    properties:
> > > +      "#address-cells":
> > > +        const: 1
> > > +
> > > +      "#size-cells":
> > > +        const: 0
> > > +
> > > +      port@0:
> > > +        type: object
> > > +        additionalProperties: false
> > > +
> > > +        description:
> > > +          Video port for MIPI DSI input
> > > +
> > > +        properties:
> > > +          reg:
> > > +            const: 0
> > > +
> > > +          endpoint:
> > > +            type: object
> > > +            additionalProperties: false
> > > +
> > > +            properties:
> > > +              remote-endpoint: true
> > > +
> > > +              data-lanes:
> > > +                minItems: 1
> > > +                maxItems: 4
> > > +                items:
> > > +                  enum:
> > > +                    - 0
> > > +                    - 1
> > > +                    - 2
> > > +                    - 3
> > > +                description: See ../../media/video-interface.txt
> >
> > And maybe
> >                 uniqueItems: true
> >
> > ? Same for port@1.
>
> Sounds good.  Again, I'll hold off on sending v5 for now and (if no
> other problems) happy if this gets done when applied.
>
>
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

I didn't want to churn the whole series, so I ended up posting a patch
that addressed the issues you mentioned and a few others.  It could be
squashed into this patch if desired.  I'm also happy to re-post this
series with that patch squashed in.  See:

https://lore.kernel.org/r/20200506140208.v2.2.I0a2bca02b09c1fcb6b09479b489736d600b3e57f@changeid
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
deleted file mode 100644
index 8ec4a7f2623a..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
+++ /dev/null
@@ -1,87 +0,0 @@ 
-SN65DSI86 DSI to eDP bridge chip
---------------------------------
-
-This is the binding for Texas Instruments SN65DSI86 bridge.
-http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
-
-Required properties:
-- compatible: Must be "ti,sn65dsi86"
-- reg: i2c address of the chip, 0x2d as per datasheet
-- enable-gpios: gpio specification for bridge_en pin (active high)
-
-- vccio-supply: A 1.8V supply that powers up the digital IOs.
-- vpll-supply: A 1.8V supply that powers up the displayport PLL.
-- vcca-supply: A 1.2V supply that powers up the analog circuits.
-- vcc-supply: A 1.2V supply that powers up the digital core.
-
-Optional properties:
-- interrupts-extended: Specifier for the SN65DSI86 interrupt line.
-
-- gpio-controller: Marks the device has a GPIO controller.
-- #gpio-cells    : Should be two. The first cell is the pin number and
-                   the second cell is used to specify flags.
-                   See ../../gpio/gpio.txt for more information.
-- #pwm-cells : Should be one. See ../../pwm/pwm.yaml for description of
-               the cell formats.
-
-- clock-names: should be "refclk"
-- clocks: Specification for input reference clock. The reference
-	  clock rate must be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz.
-
-- data-lanes: See ../../media/video-interface.txt
-- lane-polarities: See ../../media/video-interface.txt
-
-- suspend-gpios: specification for GPIO1 pin on bridge (active low)
-
-Required nodes:
-This device has two video ports. Their connections are modelled using the
-OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
-
-- Video port 0 for DSI input
-- Video port 1 for eDP output
-
-Example
--------
-
-edp-bridge@2d {
-	compatible = "ti,sn65dsi86";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0x2d>;
-
-	enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>;
-	suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>;
-
-	interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
-
-	vccio-supply = <&pm8916_l17>;
-	vcca-supply = <&pm8916_l6>;
-	vpll-supply = <&pm8916_l17>;
-	vcc-supply = <&pm8916_l6>;
-
-	clock-names = "refclk";
-	clocks = <&input_refclk>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			edp_bridge_in: endpoint {
-				remote-endpoint = <&dsi_out>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			edp_bridge_out: endpoint {
-				data-lanes = <2 1 3 0>;
-				lane-polarities = <0 1 0 1>;
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
-}
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
new file mode 100644
index 000000000000..6d7d40ad45ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
@@ -0,0 +1,279 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SN65DSI86 DSI to eDP bridge chip
+
+maintainers:
+  - Sandeep Panda <spanda@codeaurora.org>
+
+description: |
+  The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP.
+  http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
+
+properties:
+  compatible:
+    const: ti,sn65dsi86
+
+  reg:
+    const: 0x2d
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO specifier for bridge_en pin (active high).
+
+  suspend-gpios:
+    maxItems: 1
+    description: GPIO specifier for GPIO1 pin on bridge (active low).
+
+  vccio-supply:
+    description: A 1.8V supply that powers the digital IOs.
+
+  vpll-supply:
+    description: A 1.8V supply that powers the DisplayPort PLL.
+
+  vcca-supply:
+    description: A 1.2V supply that powers the analog circuits.
+
+  vcc-supply:
+    description: A 1.2V supply that powers the digital core.
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Clock specifier for input reference clock. The reference clock rate must
+      be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz.
+
+  clock-names:
+    const: refclk
+
+  gpio-controller: true
+  '#gpio-cells':
+    const: 2
+    description:
+      First cell is pin number, second cell is flags.  GPIO pin numbers are
+      1-based to match the datasheet.  See ../../gpio/gpio.txt for more
+      information.
+
+  '#pwm-cells':
+    const: 1
+    description: See ../../pwm/pwm.yaml for description of the cell formats.
+
+  ports:
+    type: object
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        additionalProperties: false
+
+        description:
+          Video port for MIPI DSI input
+
+        properties:
+          reg:
+            const: 0
+
+          endpoint:
+            type: object
+            additionalProperties: false
+
+            properties:
+              remote-endpoint: true
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                items:
+                  enum:
+                    - 0
+                    - 1
+                    - 2
+                    - 3
+                description: See ../../media/video-interface.txt
+
+              lane-polarities:
+                minItems: 1
+                maxItems: 4
+                items:
+                  enum:
+                    - 0
+                    - 1
+                description: See ../../media/video-interface.txt
+
+            dependencies:
+              data-lanes: [lane-polarities]
+
+        required:
+          - reg
+
+      port@1:
+        type: object
+        additionalProperties: false
+
+        description:
+          Video port for eDP output (panel or connector).
+
+        properties:
+          reg:
+            const: 1
+
+          endpoint:
+            type: object
+            additionalProperties: false
+
+            properties:
+              remote-endpoint: true
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                items:
+                  enum:
+                    - 0
+                    - 1
+                    - 2
+                    - 3
+                description: See ../../media/video-interface.txt
+
+              lane-polarities:
+                minItems: 1
+                maxItems: 4
+                items:
+                  enum:
+                    - 0
+                    - 1
+                description: See ../../media/video-interface.txt
+
+            dependencies:
+              data-lanes: [lane-polarities]
+
+        required:
+          - reg
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - vccio-supply
+  - vpll-supply
+  - vcca-supply
+  - vcc-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@2d {
+        compatible = "ti,sn65dsi86";
+        reg = <0x2d>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+        enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+
+        vpll-supply = <&src_pp1800_s4a>;
+        vccio-supply = <&src_pp1800_s4a>;
+        vcca-supply = <&src_pp1200_l2a>;
+        vcc-supply = <&src_pp1200_l2a>;
+
+        clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+        clock-names = "refclk";
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            endpoint {
+              remote-endpoint = <&dsi0_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            endpoint {
+              remote-endpoint = <&panel_in_edp>;
+            };
+          };
+        };
+      };
+    };
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@2d {
+        compatible = "ti,sn65dsi86";
+        reg = <0x2d>;
+
+        enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>;
+        suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>;
+
+        interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
+
+        vccio-supply = <&pm8916_l17>;
+        vcca-supply = <&pm8916_l6>;
+        vpll-supply = <&pm8916_l17>;
+        vcc-supply = <&pm8916_l6>;
+
+        clock-names = "refclk";
+        clocks = <&input_refclk>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            edp_bridge_in: endpoint {
+              remote-endpoint = <&dsi_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+
+            edp_bridge_out: endpoint {
+              data-lanes = <2 1 3 0>;
+              lane-polarities = <0 1 0 1>;
+              remote-endpoint = <&edp_panel_in>;
+            };
+          };
+        };
+      };
+    };