[6/8] drm/msm/dpu: intf timing path for displayport

Commit Message

Jonathan Marek May 26, 2020, 3:22 a.m. UTC

Calculate the correct timings for displayport, from downstream driver.

Signed-off-by: Jonathan Marek <[e-mail]>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

Patch

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
index 64f556d693dd..6f0f54588124 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
@@ -107,11 +107,6 @@  static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
 	display_v_end = ((vsync_period - p->v_front_porch) * hsync_period) +
 	p->hsync_skew - 1;
 
-	if (ctx->cap->type == INTF_EDP || ctx->cap->type == INTF_DP) {
-		display_v_start += p->hsync_pulse_width + p->h_back_porch;
-		display_v_end -= p->h_front_porch;
-	}
-
 	hsync_start_x = p->h_back_porch + p->hsync_pulse_width;
 	hsync_end_x = hsync_period - p->h_front_porch - 1;
 
@@ -144,10 +139,25 @@  static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
 	hsync_ctl = (hsync_period << 16) | p->hsync_pulse_width;
 	display_hctl = (hsync_end_x << 16) | hsync_start_x;
 
+	if (ctx->cap->type == INTF_EDP || ctx->cap->type == INTF_DP) {
+		active_h_start = hsync_start_x;
+		active_h_end = active_h_start + p->xres - 1;
+		active_v_start = display_v_start;
+		active_v_end = active_v_start + (p->yres * hsync_period) - 1;
+
+		display_v_start += p->hsync_pulse_width + p->h_back_porch;
+
+		active_hctl = (active_h_end << 16) | active_h_start;
+		display_hctl = active_hctl;
+	}
+
 	den_polarity = 0;
 	if (ctx->cap->type == INTF_HDMI) {
 		hsync_polarity = p->yres >= 720 ? 0 : 1;
 		vsync_polarity = p->yres >= 720 ? 0 : 1;
+	} else if (ctx->cap->type == INTF_DP) {
+		hsync_polarity = p->hsync_polarity;
+		vsync_polarity = p->vsync_polarity;
 	} else {
 		hsync_polarity = 0;
 		vsync_polarity = 0;