[1/2] backlight: sky81452: Convert to GPIO descriptors

Commit Message

Linus Walleij June 26, 2020, 8:37 p.m. UTC

The SKY81452 backlight driver just obtains a GPIO (named "gpios"
in the device tree) drives it high and leaves it high until the
driver is removed.

Switch to use GPIO descriptors for this, simple and
straight-forward.

Cc: Gyungoh Yoo <[e-mail]>
Signed-off-by: Linus Walleij <[e-mail]>
---
 drivers/video/backlight/sky81452-backlight.c   | 18 ++++--------------
 .../linux/platform_data/sky81452-backlight.h   |  6 ++++--
 2 files changed, 8 insertions(+), 16 deletions(-)

Comments

Daniel Thompson June 29, 2020, 11:16 a.m. UTC | #1

On Fri, Jun 26, 2020 at 10:37:41PM +0200, Linus Walleij wrote:
> The SKY81452 backlight driver just obtains a GPIO (named "gpios"
> in the device tree) drives it high and leaves it high until the
> driver is removed.
> 
> Switch to use GPIO descriptors for this, simple and
> straight-forward.
> 
> Cc: Gyungoh Yoo <[e-mail]>
> Signed-off-by: Linus Walleij <[e-mail]>

Reviewed-by: Daniel Thompson <[e-mail]>


Daniel.

Lee Jones July 1, 2020, 9:39 a.m. UTC | #2

On Fri, 26 Jun 2020, Linus Walleij wrote:

> The SKY81452 backlight driver just obtains a GPIO (named "gpios"
> in the device tree) drives it high and leaves it high until the
> driver is removed.
> 
> Switch to use GPIO descriptors for this, simple and
> straight-forward.
> 
> Cc: Gyungoh Yoo <[e-mail]>
> Signed-off-by: Linus Walleij <[e-mail]>
> ---
>  drivers/video/backlight/sky81452-backlight.c   | 18 ++++--------------
>  .../linux/platform_data/sky81452-backlight.h   |  6 ++++--
>  2 files changed, 8 insertions(+), 16 deletions(-)

Applied, thanks.

Patch

diff --git a/drivers/video/backlight/sky81452-backlight.c b/drivers/video/backlight/sky81452-backlight.c
index 2355f00f5773..81d2c8f3ca50 100644
--- a/drivers/video/backlight/sky81452-backlight.c
+++ b/drivers/video/backlight/sky81452-backlight.c
@@ -8,12 +8,11 @@ 
 
 #include <linux/backlight.h>
 #include <linux/err.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/platform_data/sky81452-backlight.h>
@@ -182,7 +181,7 @@  static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
 	pdata->ignore_pwm = of_property_read_bool(np, "skyworks,ignore-pwm");
 	pdata->dpwm_mode = of_property_read_bool(np, "skyworks,dpwm-mode");
 	pdata->phase_shift = of_property_read_bool(np, "skyworks,phase-shift");
-	pdata->gpio_enable = of_get_gpio(np, 0);
+	pdata->gpiod_enable = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH);
 
 	ret = of_property_count_u32_elems(np, "led-sources");
 	if (ret < 0) {
@@ -264,15 +263,6 @@  static int sky81452_bl_probe(struct platform_device *pdev)
 			return PTR_ERR(pdata);
 	}
 
-	if (gpio_is_valid(pdata->gpio_enable)) {
-		ret = devm_gpio_request_one(dev, pdata->gpio_enable,
-					GPIOF_OUT_INIT_HIGH, "sky81452-en");
-		if (ret < 0) {
-			dev_err(dev, "failed to request GPIO. err=%d\n", ret);
-			return ret;
-		}
-	}
-
 	ret = sky81452_bl_init_device(regmap, pdata);
 	if (ret < 0) {
 		dev_err(dev, "failed to initialize. err=%d\n", ret);
@@ -312,8 +302,8 @@  static int sky81452_bl_remove(struct platform_device *pdev)
 	bd->props.brightness = 0;
 	backlight_update_status(bd);
 
-	if (gpio_is_valid(pdata->gpio_enable))
-		gpio_set_value_cansleep(pdata->gpio_enable, 0);
+	if (pdata->gpiod_enable)
+		gpiod_set_value_cansleep(pdata->gpiod_enable, 0);
 
 	return 0;
 }
diff --git a/include/linux/platform_data/sky81452-backlight.h b/include/linux/platform_data/sky81452-backlight.h
index 02653d92d84f..d6f46670d923 100644
--- a/include/linux/platform_data/sky81452-backlight.h
+++ b/include/linux/platform_data/sky81452-backlight.h
@@ -9,11 +9,13 @@ 
 #ifndef _SKY81452_BACKLIGHT_H
 #define _SKY81452_BACKLIGHT_H
 
+#include <linux/gpio/consumer.h>
+
 /**
  * struct sky81452_platform_data
  * @name:	backlight driver name.
 		If it is not defined, default name is lcd-backlight.
- * @gpio_enable:GPIO number which control EN pin
+ * @gpios_enable:GPIO descriptor which control EN pin
  * @enable:	Enable mask for current sink channel 1, 2, 3, 4, 5 and 6.
  * @ignore_pwm:	true if DPWMI should be ignored.
  * @dpwm_mode:	true is DPWM dimming mode, otherwise Analog dimming mode.
@@ -23,7 +25,7 @@ 
  */
 struct sky81452_bl_platform_data {
 	const char *name;
-	int gpio_enable;
+	struct gpio_desc *gpiod_enable;
 	unsigned int enable;
 	bool ignore_pwm;
 	bool dpwm_mode;