diff mbox series

[v3,18/21] drm/bridge: nxp-ptn3460: add drm_panel_bridge support

Message ID 20200703192417.372164-19-sam@ravnborg.org (mailing list archive)
State New, archived
Headers show
Series drm/bridge: support chained bridges + panel updates | expand

Commit Message

Sam Ravnborg July 3, 2020, 7:24 p.m. UTC
Prepare the bridge driver for use in a chained setup by
replacing direct use of drm_panel with drm_panel_bridge support.

Note: the bridge panel will use the connector type from the panel.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/gpu/drm/bridge/nxp-ptn3460.c | 51 ++++++++--------------------
 1 file changed, 14 insertions(+), 37 deletions(-)

Comments

Laurent Pinchart July 10, 2020, 10:39 p.m. UTC | #1
Hi Sam,

Thank you for the patch.

On Fri, Jul 03, 2020 at 09:24:14PM +0200, Sam Ravnborg wrote:
> Prepare the bridge driver for use in a chained setup by
> replacing direct use of drm_panel with drm_panel_bridge support.
> 
> Note: the bridge panel will use the connector type from the panel.
> 
> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
> Cc: Andrzej Hajda <a.hajda@samsung.com>
> Cc: Neil Armstrong <narmstrong@baylibre.com>
> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
> Cc: Jonas Karlman <jonas@kwiboo.se>
> Cc: Jernej Skrabec <jernej.skrabec@siol.net>
> ---
>  drivers/gpu/drm/bridge/nxp-ptn3460.c | 51 ++++++++--------------------
>  1 file changed, 14 insertions(+), 37 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/nxp-ptn3460.c b/drivers/gpu/drm/bridge/nxp-ptn3460.c
> index 438e566ce0a4..0bd9f0e451b3 100644
> --- a/drivers/gpu/drm/bridge/nxp-ptn3460.c
> +++ b/drivers/gpu/drm/bridge/nxp-ptn3460.c
> @@ -30,7 +30,7 @@ struct ptn3460_bridge {
>  	struct i2c_client *client;
>  	struct drm_bridge bridge;
>  	struct edid *edid;
> -	struct drm_panel *panel;
> +	struct drm_bridge *panel_bridge;
>  	struct gpio_desc *gpio_pd_n;
>  	struct gpio_desc *gpio_rst_n;
>  	u32 edid_emulation;
> @@ -127,11 +127,6 @@ static void ptn3460_pre_enable(struct drm_bridge *bridge)
>  	usleep_range(10, 20);
>  	gpiod_set_value(ptn_bridge->gpio_rst_n, 1);
>  
> -	if (drm_panel_prepare(ptn_bridge->panel)) {
> -		DRM_ERROR("failed to prepare panel\n");
> -		return;
> -	}
> -
>  	/*
>  	 * There's a bug in the PTN chip where it falsely asserts hotplug before
>  	 * it is fully functional. We're forced to wait for the maximum start up
> @@ -146,16 +141,6 @@ static void ptn3460_pre_enable(struct drm_bridge *bridge)
>  	ptn_bridge->enabled = true;
>  }
>  
> -static void ptn3460_enable(struct drm_bridge *bridge)
> -{
> -	struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
> -
> -	if (drm_panel_enable(ptn_bridge->panel)) {
> -		DRM_ERROR("failed to enable panel\n");
> -		return;
> -	}
> -}
> -
>  static void ptn3460_disable(struct drm_bridge *bridge)
>  {
>  	struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
> @@ -165,25 +150,10 @@ static void ptn3460_disable(struct drm_bridge *bridge)
>  
>  	ptn_bridge->enabled = false;
>  
> -	if (drm_panel_disable(ptn_bridge->panel)) {
> -		DRM_ERROR("failed to disable panel\n");
> -		return;
> -	}
> -
>  	gpiod_set_value(ptn_bridge->gpio_rst_n, 1);
>  	gpiod_set_value(ptn_bridge->gpio_pd_n, 0);
>  }
>  
> -static void ptn3460_post_disable(struct drm_bridge *bridge)
> -{
> -	struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
> -
> -	if (drm_panel_unprepare(ptn_bridge->panel)) {
> -		DRM_ERROR("failed to unprepare panel\n");
> -		return;
> -	}
> -}
> -
>  static int ptn3460_get_modes(struct drm_connector *connector)
>  {
>  	struct ptn3460_bridge *ptn_bridge;
> @@ -242,6 +212,11 @@ static int ptn3460_bridge_attach(struct drm_bridge *bridge,
>  	struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
>  	int ret;
>  
> +	ret = drm_bridge_attach(bridge->encoder, ptn_bridge->panel_bridge,
> +				bridge, flags);

Same as earlier in the series about the flags.

> +	if (ret < 0)
> +		return ret;
> +
>  	if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
>  		DRM_ERROR("Fix bridge driver to make connector optional!");
>  		return -EINVAL;
> @@ -265,9 +240,6 @@ static int ptn3460_bridge_attach(struct drm_bridge *bridge,
>  	drm_connector_attach_encoder(&ptn_bridge->connector,
>  							bridge->encoder);
>  
> -	if (ptn_bridge->panel)
> -		drm_panel_attach(ptn_bridge->panel, &ptn_bridge->connector);
> -
>  	drm_helper_hpd_irq_event(ptn_bridge->connector.dev);
>  
>  	return ret;
> @@ -275,9 +247,7 @@ static int ptn3460_bridge_attach(struct drm_bridge *bridge,
>  
>  static const struct drm_bridge_funcs ptn3460_bridge_funcs = {
>  	.pre_enable = ptn3460_pre_enable,
> -	.enable = ptn3460_enable,
>  	.disable = ptn3460_disable,
> -	.post_disable = ptn3460_post_disable,
>  	.attach = ptn3460_bridge_attach,
>  };
>  
> @@ -286,6 +256,8 @@ static int ptn3460_probe(struct i2c_client *client,
>  {
>  	struct device *dev = &client->dev;
>  	struct ptn3460_bridge *ptn_bridge;
> +	struct drm_bridge *pbridge;
> +	struct drm_panel *panel;
>  	int ret;
>  
>  	ptn_bridge = devm_kzalloc(dev, sizeof(*ptn_bridge), GFP_KERNEL);
> @@ -293,10 +265,15 @@ static int ptn3460_probe(struct i2c_client *client,
>  		return -ENOMEM;
>  	}
>  
> -	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &ptn_bridge->panel, NULL);
> +	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &panel, NULL);
>  	if (ret)
>  		return ret;
>  
> +	pbridge = devm_drm_panel_bridge_add(dev, panel);
> +	if (IS_ERR(pbridge))
> +		return PTR_ERR(pbridge);
> +
> +	ptn_bridge->panel_bridge = pbridge;
>  	ptn_bridge->client = client;
>  
>  	ptn_bridge->gpio_pd_n = devm_gpiod_get(&client->dev, "powerdown",
diff mbox series

Patch

diff --git a/drivers/gpu/drm/bridge/nxp-ptn3460.c b/drivers/gpu/drm/bridge/nxp-ptn3460.c
index 438e566ce0a4..0bd9f0e451b3 100644
--- a/drivers/gpu/drm/bridge/nxp-ptn3460.c
+++ b/drivers/gpu/drm/bridge/nxp-ptn3460.c
@@ -30,7 +30,7 @@  struct ptn3460_bridge {
 	struct i2c_client *client;
 	struct drm_bridge bridge;
 	struct edid *edid;
-	struct drm_panel *panel;
+	struct drm_bridge *panel_bridge;
 	struct gpio_desc *gpio_pd_n;
 	struct gpio_desc *gpio_rst_n;
 	u32 edid_emulation;
@@ -127,11 +127,6 @@  static void ptn3460_pre_enable(struct drm_bridge *bridge)
 	usleep_range(10, 20);
 	gpiod_set_value(ptn_bridge->gpio_rst_n, 1);
 
-	if (drm_panel_prepare(ptn_bridge->panel)) {
-		DRM_ERROR("failed to prepare panel\n");
-		return;
-	}
-
 	/*
 	 * There's a bug in the PTN chip where it falsely asserts hotplug before
 	 * it is fully functional. We're forced to wait for the maximum start up
@@ -146,16 +141,6 @@  static void ptn3460_pre_enable(struct drm_bridge *bridge)
 	ptn_bridge->enabled = true;
 }
 
-static void ptn3460_enable(struct drm_bridge *bridge)
-{
-	struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
-
-	if (drm_panel_enable(ptn_bridge->panel)) {
-		DRM_ERROR("failed to enable panel\n");
-		return;
-	}
-}
-
 static void ptn3460_disable(struct drm_bridge *bridge)
 {
 	struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
@@ -165,25 +150,10 @@  static void ptn3460_disable(struct drm_bridge *bridge)
 
 	ptn_bridge->enabled = false;
 
-	if (drm_panel_disable(ptn_bridge->panel)) {
-		DRM_ERROR("failed to disable panel\n");
-		return;
-	}
-
 	gpiod_set_value(ptn_bridge->gpio_rst_n, 1);
 	gpiod_set_value(ptn_bridge->gpio_pd_n, 0);
 }
 
-static void ptn3460_post_disable(struct drm_bridge *bridge)
-{
-	struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
-
-	if (drm_panel_unprepare(ptn_bridge->panel)) {
-		DRM_ERROR("failed to unprepare panel\n");
-		return;
-	}
-}
-
 static int ptn3460_get_modes(struct drm_connector *connector)
 {
 	struct ptn3460_bridge *ptn_bridge;
@@ -242,6 +212,11 @@  static int ptn3460_bridge_attach(struct drm_bridge *bridge,
 	struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
 	int ret;
 
+	ret = drm_bridge_attach(bridge->encoder, ptn_bridge->panel_bridge,
+				bridge, flags);
+	if (ret < 0)
+		return ret;
+
 	if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
 		DRM_ERROR("Fix bridge driver to make connector optional!");
 		return -EINVAL;
@@ -265,9 +240,6 @@  static int ptn3460_bridge_attach(struct drm_bridge *bridge,
 	drm_connector_attach_encoder(&ptn_bridge->connector,
 							bridge->encoder);
 
-	if (ptn_bridge->panel)
-		drm_panel_attach(ptn_bridge->panel, &ptn_bridge->connector);
-
 	drm_helper_hpd_irq_event(ptn_bridge->connector.dev);
 
 	return ret;
@@ -275,9 +247,7 @@  static int ptn3460_bridge_attach(struct drm_bridge *bridge,
 
 static const struct drm_bridge_funcs ptn3460_bridge_funcs = {
 	.pre_enable = ptn3460_pre_enable,
-	.enable = ptn3460_enable,
 	.disable = ptn3460_disable,
-	.post_disable = ptn3460_post_disable,
 	.attach = ptn3460_bridge_attach,
 };
 
@@ -286,6 +256,8 @@  static int ptn3460_probe(struct i2c_client *client,
 {
 	struct device *dev = &client->dev;
 	struct ptn3460_bridge *ptn_bridge;
+	struct drm_bridge *pbridge;
+	struct drm_panel *panel;
 	int ret;
 
 	ptn_bridge = devm_kzalloc(dev, sizeof(*ptn_bridge), GFP_KERNEL);
@@ -293,10 +265,15 @@  static int ptn3460_probe(struct i2c_client *client,
 		return -ENOMEM;
 	}
 
-	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &ptn_bridge->panel, NULL);
+	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &panel, NULL);
 	if (ret)
 		return ret;
 
+	pbridge = devm_drm_panel_bridge_add(dev, panel);
+	if (IS_ERR(pbridge))
+		return PTR_ERR(pbridge);
+
+	ptn_bridge->panel_bridge = pbridge;
 	ptn_bridge->client = client;
 
 	ptn_bridge->gpio_pd_n = devm_gpiod_get(&client->dev, "powerdown",