deleted file mode 100644
@@ -1,56 +0,0 @@
-Samsung S6E8AA0 AMOLED LCD 5.3 inch panel
-
-Required properties:
- - compatible: "samsung,s6e8aa0"
- - reg: the virtual channel number of a DSI peripheral
- - vdd3-supply: core voltage supply
- - vci-supply: voltage supply for analog circuits
- - reset-gpios: a GPIO spec for the reset pin
- - display-timings: timings for the connected panel as described by [1]
-
-Optional properties:
- - power-on-delay: delay after turning regulators on [ms]
- - reset-delay: delay after reset sequence [ms]
- - init-delay: delay after initialization sequence [ms]
- - panel-width-mm: physical panel width [mm]
- - panel-height-mm: physical panel height [mm]
- - flip-horizontal: boolean to flip image horizontally
- - flip-vertical: boolean to flip image vertically
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in [2]. This
-node should describe panel's video bus.
-
-[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
-[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
- panel {
- compatible = "samsung,s6e8aa0";
- reg = <0>;
- vdd3-supply = <&vcclcd_reg>;
- vci-supply = <&vlcd_reg>;
- reset-gpios = <&gpy4 5 0>;
- power-on-delay= <50>;
- reset-delay = <100>;
- init-delay = <100>;
- panel-width-mm = <58>;
- panel-height-mm = <103>;
- flip-horizontal;
- flip-vertical;
-
- display-timings {
- timing0: timing-0 {
- clock-frequency = <57153600>;
- hactive = <720>;
- vactive = <1280>;
- hfront-porch = <5>;
- hback-porch = <5>;
- hsync-len = <5>;
- vfront-porch = <13>;
- vback-porch = <1>;
- vsync-len = <2>;
- };
- };
- };
new file mode 100644
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6e8aa0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6E8AA0 AMOLED LCD 5.3 inch panel
+
+maintainers:
+ - Andrzej Hajda <a.hajda@samsung.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: samsung,s6e8aa0
+
+ reg: true
+ reset-gpios: true
+ display-timings: true
+
+ vdd3-supply:
+ description: core voltage supply
+
+ vci-supply:
+ description: voltage supply for analog circuits
+
+ power-on-delay:
+ description: delay after turning regulators on [ms]
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ reset-delay:
+ description: delay after reset sequence [ms]
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ init-delay:
+ description: delay after initialization sequence [ms]
+
+ panel-width-mm:
+ description: physical panel width [mm]
+
+ panel-height-mm:
+ description: physical panel height [mm]
+
+ flip-horizontal:
+ description: boolean to flip image horizontally
+ type: boolean
+
+ flip-vertical:
+ description: boolean to flip image vertically
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - vdd3-supply
+ - vci-supply
+ - reset-gpios
+ - display-timings
+
+additionalProperties: false
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "samsung,s6e8aa0";
+ reg = <0>;
+ vdd3-supply = <&vcclcd_reg>;
+ vci-supply = <&vlcd_reg>;
+ reset-gpios = <&gpy4 5 0>;
+ power-on-delay= <50>;
+ reset-delay = <100>;
+ init-delay = <100>;
+ panel-width-mm = <58>;
+ panel-height-mm = <103>;
+ flip-horizontal;
+ flip-vertical;
+
+ display-timings {
+ timing0: timing-0 {
+ clock-frequency = <57153600>;
+ hactive = <720>;
+ vactive = <1280>;
+ hfront-porch = <5>;
+ hback-porch = <5>;
+ hsync-len = <5>;
+ vfront-porch = <13>;
+ vback-porch = <1>;
+ vsync-len = <2>;
+ };
+ };
+ };
+ };
+
+...
v2: - Add missing types (Rob) - Fix example to specify panel@0 (Rob) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Rob Herring <robh@kernel.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> --- .../display/panel/samsung,s6e8aa0.txt | 56 ---------- .../display/panel/samsung,s6e8aa0.yaml | 100 ++++++++++++++++++ 2 files changed, 100 insertions(+), 56 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml