diff mbox series

[v4,15/15] drm/bridge: nxp-ptn3460: add drm_panel_bridge support

Message ID 20200726203324.3722593-16-sam@ravnborg.org (mailing list archive)
State New, archived
Headers show
Series drm/bridge: support chained bridges + panel updates | expand

Commit Message

Sam Ravnborg July 26, 2020, 8:33 p.m. UTC 
Prepare the bridge driver for use in a chained setup.

- Replacing direct use of drm_panel with drm_panel_bridge support.
- Make the connector creation optional

Note: the bridge panel will use the connector type from the panel.

v2:
  - Use panel_bridge for local variable name to align with other drivers
  - Fix that connector was created twice (Laurent)
  - Set bridge.type to DRM_MODE_CONNECTOR_LVDS.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/gpu/drm/bridge/nxp-ptn3460.c | 60 ++++++++++------------------
 1 file changed, 20 insertions(+), 40 deletions(-)

Comments

Laurent Pinchart July 26, 2020, 10:05 p.m. UTC | #1 
Hi Sam,

Thank you for the patch.

On Sun, Jul 26, 2020 at 10:33:24PM +0200, Sam Ravnborg wrote:
> Prepare the bridge driver for use in a chained setup.
> 
> - Replacing direct use of drm_panel with drm_panel_bridge support.
> - Make the connector creation optional
> 
> Note: the bridge panel will use the connector type from the panel.
> 
> v2:
>   - Use panel_bridge for local variable name to align with other drivers
>   - Fix that connector was created twice (Laurent)
>   - Set bridge.type to DRM_MODE_CONNECTOR_LVDS.
> 
> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
> Cc: Andrzej Hajda <a.hajda@samsung.com>
> Cc: Neil Armstrong <narmstrong@baylibre.com>
> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
> Cc: Jonas Karlman <jonas@kwiboo.se>
> Cc: Jernej Skrabec <jernej.skrabec@siol.net>
> ---
>  drivers/gpu/drm/bridge/nxp-ptn3460.c | 60 ++++++++++------------------
>  1 file changed, 20 insertions(+), 40 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/nxp-ptn3460.c b/drivers/gpu/drm/bridge/nxp-ptn3460.c
> index 2805c8938f98..a49616855dd3 100644
> --- a/drivers/gpu/drm/bridge/nxp-ptn3460.c
> +++ b/drivers/gpu/drm/bridge/nxp-ptn3460.c
> @@ -29,7 +29,7 @@ struct ptn3460_bridge {
>  	struct drm_connector connector;
>  	struct i2c_client *client;
>  	struct drm_bridge bridge;
> -	struct drm_panel *panel;
> +	struct drm_bridge *panel_bridge;
>  	struct gpio_desc *gpio_pd_n;
>  	struct gpio_desc *gpio_rst_n;
>  	u32 edid_emulation;
> @@ -126,11 +126,6 @@ static void ptn3460_pre_enable(struct drm_bridge *bridge)
>  	usleep_range(10, 20);
>  	gpiod_set_value(ptn_bridge->gpio_rst_n, 1);
>  
> -	if (drm_panel_prepare(ptn_bridge->panel)) {
> -		DRM_ERROR("failed to prepare panel\n");
> -		return;
> -	}
> -
>  	/*
>  	 * There's a bug in the PTN chip where it falsely asserts hotplug before
>  	 * it is fully functional. We're forced to wait for the maximum start up
> @@ -145,16 +140,6 @@ static void ptn3460_pre_enable(struct drm_bridge *bridge)
>  	ptn_bridge->enabled = true;
>  }
>  
> -static void ptn3460_enable(struct drm_bridge *bridge)
> -{
> -	struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
> -
> -	if (drm_panel_enable(ptn_bridge->panel)) {
> -		DRM_ERROR("failed to enable panel\n");
> -		return;
> -	}
> -}
> -
>  static void ptn3460_disable(struct drm_bridge *bridge)
>  {
>  	struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
> @@ -164,24 +149,10 @@ static void ptn3460_disable(struct drm_bridge *bridge)
>  
>  	ptn_bridge->enabled = false;
>  
> -	if (drm_panel_disable(ptn_bridge->panel)) {
> -		DRM_ERROR("failed to disable panel\n");
> -		return;
> -	}
> -
>  	gpiod_set_value(ptn_bridge->gpio_rst_n, 1);
>  	gpiod_set_value(ptn_bridge->gpio_pd_n, 0);
>  }
>  
> -static void ptn3460_post_disable(struct drm_bridge *bridge)
> -{
> -	struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
> -
> -	if (drm_panel_unprepare(ptn_bridge->panel)) {
> -		DRM_ERROR("failed to unprepare panel\n");
> -		return;
> -	}
> -}
>  

Extra blank line.

>  static struct edid *ptn3460_get_edid(struct drm_bridge *bridge,
>  				     struct drm_connector *connector)
> @@ -245,12 +216,18 @@ static int ptn3460_bridge_attach(struct drm_bridge *bridge,
>  				 enum drm_bridge_attach_flags flags)
>  {
>  	struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
> +	enum drm_bridge_attach_flags panel_flags;
>  	int ret;
>  
> -	if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
> -		DRM_ERROR("Fix bridge driver to make connector optional!");
> -		return -EINVAL;
> -	}
> +	/* Let this driver create connector if requested */
> +	panel_flags = flags & ~DRM_BRIDGE_ATTACH_NO_CONNECTOR;

Same as in a previous patch, should this be

	panel_flags = flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR;

?

> +	ret = drm_bridge_attach(bridge->encoder, ptn_bridge->panel_bridge,
> +				bridge, panel_flags);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)
> +		return 0;
>  
>  	if (!bridge->encoder) {
>  		DRM_ERROR("Parent encoder object not found");
> @@ -270,9 +247,6 @@ static int ptn3460_bridge_attach(struct drm_bridge *bridge,
>  	drm_connector_attach_encoder(&ptn_bridge->connector,
>  							bridge->encoder);
>  
> -	if (ptn_bridge->panel)
> -		drm_panel_attach(ptn_bridge->panel, &ptn_bridge->connector);
> -
>  	drm_helper_hpd_irq_event(ptn_bridge->connector.dev);
>  
>  	return ret;
> @@ -280,9 +254,7 @@ static int ptn3460_bridge_attach(struct drm_bridge *bridge,
>  
>  static const struct drm_bridge_funcs ptn3460_bridge_funcs = {
>  	.pre_enable = ptn3460_pre_enable,
> -	.enable = ptn3460_enable,
>  	.disable = ptn3460_disable,
> -	.post_disable = ptn3460_post_disable,
>  	.attach = ptn3460_bridge_attach,
>  	.get_edid = ptn3460_get_edid,
>  };
> @@ -292,6 +264,8 @@ static int ptn3460_probe(struct i2c_client *client,
>  {
>  	struct device *dev = &client->dev;
>  	struct ptn3460_bridge *ptn_bridge;
> +	struct drm_bridge *panel_bridge;
> +	struct drm_panel *panel;
>  	int ret;
>  
>  	ptn_bridge = devm_kzalloc(dev, sizeof(*ptn_bridge), GFP_KERNEL);
> @@ -299,10 +273,15 @@ static int ptn3460_probe(struct i2c_client *client,
>  		return -ENOMEM;
>  	}
>  
> -	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &ptn_bridge->panel, NULL);
> +	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &panel, NULL);
>  	if (ret)
>  		return ret;
>  
> +	panel_bridge = devm_drm_panel_bridge_add(dev, panel);
> +	if (IS_ERR(panel_bridge))
> +		return PTR_ERR(panel_bridge);
> +
> +	ptn_bridge->panel_bridge = panel_bridge;
>  	ptn_bridge->client = client;
>  
>  	ptn_bridge->gpio_pd_n = devm_gpiod_get(&client->dev, "powerdown",
> @@ -334,6 +313,7 @@ static int ptn3460_probe(struct i2c_client *client,
>  
>  	ptn_bridge->bridge.funcs = &ptn3460_bridge_funcs;
>  	ptn_bridge->bridge.ops = DRM_BRIDGE_OP_EDID;
> +	ptn_bridge->bridge.type = DRM_MODE_CONNECTOR_LVDS;
>  	ptn_bridge->bridge.of_node = dev->of_node;
>  	drm_bridge_add(&ptn_bridge->bridge);
>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/bridge/nxp-ptn3460.c b/drivers/gpu/drm/bridge/nxp-ptn3460.c
index 2805c8938f98..a49616855dd3 100644
--- a/drivers/gpu/drm/bridge/nxp-ptn3460.c
+++ b/drivers/gpu/drm/bridge/nxp-ptn3460.c
@@ -29,7 +29,7 @@  struct ptn3460_bridge {
 	struct drm_connector connector;
 	struct i2c_client *client;
 	struct drm_bridge bridge;
-	struct drm_panel *panel;
+	struct drm_bridge *panel_bridge;
 	struct gpio_desc *gpio_pd_n;
 	struct gpio_desc *gpio_rst_n;
 	u32 edid_emulation;
@@ -126,11 +126,6 @@  static void ptn3460_pre_enable(struct drm_bridge *bridge)
 	usleep_range(10, 20);
 	gpiod_set_value(ptn_bridge->gpio_rst_n, 1);
 
-	if (drm_panel_prepare(ptn_bridge->panel)) {
-		DRM_ERROR("failed to prepare panel\n");
-		return;
-	}
-
 	/*
 	 * There's a bug in the PTN chip where it falsely asserts hotplug before
 	 * it is fully functional. We're forced to wait for the maximum start up
@@ -145,16 +140,6 @@  static void ptn3460_pre_enable(struct drm_bridge *bridge)
 	ptn_bridge->enabled = true;
 }
 
-static void ptn3460_enable(struct drm_bridge *bridge)
-{
-	struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
-
-	if (drm_panel_enable(ptn_bridge->panel)) {
-		DRM_ERROR("failed to enable panel\n");
-		return;
-	}
-}
-
 static void ptn3460_disable(struct drm_bridge *bridge)
 {
 	struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
@@ -164,24 +149,10 @@  static void ptn3460_disable(struct drm_bridge *bridge)
 
 	ptn_bridge->enabled = false;
 
-	if (drm_panel_disable(ptn_bridge->panel)) {
-		DRM_ERROR("failed to disable panel\n");
-		return;
-	}
-
 	gpiod_set_value(ptn_bridge->gpio_rst_n, 1);
 	gpiod_set_value(ptn_bridge->gpio_pd_n, 0);
 }
 
-static void ptn3460_post_disable(struct drm_bridge *bridge)
-{
-	struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
-
-	if (drm_panel_unprepare(ptn_bridge->panel)) {
-		DRM_ERROR("failed to unprepare panel\n");
-		return;
-	}
-}
 
 static struct edid *ptn3460_get_edid(struct drm_bridge *bridge,
 				     struct drm_connector *connector)
@@ -245,12 +216,18 @@  static int ptn3460_bridge_attach(struct drm_bridge *bridge,
 				 enum drm_bridge_attach_flags flags)
 {
 	struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
+	enum drm_bridge_attach_flags panel_flags;
 	int ret;
 
-	if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
-		DRM_ERROR("Fix bridge driver to make connector optional!");
-		return -EINVAL;
-	}
+	/* Let this driver create connector if requested */
+	panel_flags = flags & ~DRM_BRIDGE_ATTACH_NO_CONNECTOR;
+	ret = drm_bridge_attach(bridge->encoder, ptn_bridge->panel_bridge,
+				bridge, panel_flags);
+	if (ret < 0)
+		return ret;
+
+	if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)
+		return 0;
 
 	if (!bridge->encoder) {
 		DRM_ERROR("Parent encoder object not found");
@@ -270,9 +247,6 @@  static int ptn3460_bridge_attach(struct drm_bridge *bridge,
 	drm_connector_attach_encoder(&ptn_bridge->connector,
 							bridge->encoder);
 
-	if (ptn_bridge->panel)
-		drm_panel_attach(ptn_bridge->panel, &ptn_bridge->connector);
-
 	drm_helper_hpd_irq_event(ptn_bridge->connector.dev);
 
 	return ret;
@@ -280,9 +254,7 @@  static int ptn3460_bridge_attach(struct drm_bridge *bridge,
 
 static const struct drm_bridge_funcs ptn3460_bridge_funcs = {
 	.pre_enable = ptn3460_pre_enable,
-	.enable = ptn3460_enable,
 	.disable = ptn3460_disable,
-	.post_disable = ptn3460_post_disable,
 	.attach = ptn3460_bridge_attach,
 	.get_edid = ptn3460_get_edid,
 };
@@ -292,6 +264,8 @@  static int ptn3460_probe(struct i2c_client *client,
 {
 	struct device *dev = &client->dev;
 	struct ptn3460_bridge *ptn_bridge;
+	struct drm_bridge *panel_bridge;
+	struct drm_panel *panel;
 	int ret;
 
 	ptn_bridge = devm_kzalloc(dev, sizeof(*ptn_bridge), GFP_KERNEL);
@@ -299,10 +273,15 @@  static int ptn3460_probe(struct i2c_client *client,
 		return -ENOMEM;
 	}
 
-	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &ptn_bridge->panel, NULL);
+	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &panel, NULL);
 	if (ret)
 		return ret;
 
+	panel_bridge = devm_drm_panel_bridge_add(dev, panel);
+	if (IS_ERR(panel_bridge))
+		return PTR_ERR(panel_bridge);
+
+	ptn_bridge->panel_bridge = panel_bridge;
 	ptn_bridge->client = client;
 
 	ptn_bridge->gpio_pd_n = devm_gpiod_get(&client->dev, "powerdown",
@@ -334,6 +313,7 @@  static int ptn3460_probe(struct i2c_client *client,
 
 	ptn_bridge->bridge.funcs = &ptn3460_bridge_funcs;
 	ptn_bridge->bridge.ops = DRM_BRIDGE_OP_EDID;
+	ptn_bridge->bridge.type = DRM_MODE_CONNECTOR_LVDS;
 	ptn_bridge->bridge.of_node = dev->of_node;
 	drm_bridge_add(&ptn_bridge->bridge);