diff mbox series

dt-bindings: Whitespace clean-ups in schema files

Message ID 20200812203618.2656699-1-robh@kernel.org (mailing list archive)
State New, archived
Headers show
Series dt-bindings: Whitespace clean-ups in schema files | expand

Commit Message

Rob Herring Aug. 12, 2020, 8:36 p.m. UTC
Clean-up incorrect indentation, extra spaces, long lines, and missing
EOF newline in schema files. Most of the clean-ups are for list
indentation which should always be 2 spaces more than the preceding
keyword.

Found with yamllint (which I plan to integrate into the checks).

Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-spi@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-remoteproc@vger.kernel.org
Cc: linux-hwmon@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: netdev@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
 .../bindings/arm/arm,integrator.yaml          |  6 +-
 .../devicetree/bindings/arm/arm,realview.yaml | 66 ++++++-------
 .../bindings/arm/arm,vexpress-juno.yaml       | 12 +--
 .../bindings/arm/bcm/brcm,bcm11351.yaml       |  2 +-
 .../bindings/arm/bcm/brcm,bcm21664.yaml       |  2 +-
 .../bindings/arm/bcm/brcm,bcm23550.yaml       |  2 +-
 .../bindings/arm/bcm/brcm,cygnus.yaml         | 20 ++--
 .../devicetree/bindings/arm/bcm/brcm,hr2.yaml |  2 +-
 .../devicetree/bindings/arm/bcm/brcm,ns2.yaml |  4 +-
 .../devicetree/bindings/arm/bcm/brcm,nsp.yaml | 14 +--
 .../bindings/arm/bcm/brcm,stingray.yaml       |  6 +-
 .../bindings/arm/bcm/brcm,vulcan-soc.yaml     |  4 +-
 .../bindings/arm/coresight-cti.yaml           | 20 ++--
 .../devicetree/bindings/arm/cpus.yaml         |  4 +-
 .../devicetree/bindings/arm/fsl.yaml          | 13 ++-
 .../bindings/arm/intel,keembay.yaml           |  2 +-
 .../arm/mediatek/mediatek,pericfg.yaml        | 30 +++---
 .../bindings/bus/baikal,bt1-apb.yaml          |  2 +-
 .../bindings/bus/baikal,bt1-axi.yaml          |  2 +-
 .../bindings/clock/idt,versaclock5.yaml       |  8 +-
 .../bindings/clock/ingenic,cgu.yaml           | 16 ++--
 .../devicetree/bindings/clock/qcom,mmcc.yaml  |  2 +-
 .../bindings/clock/renesas,cpg-clocks.yaml    |  6 +-
 .../bindings/clock/sprd,sc9863a-clk.yaml      |  2 +-
 .../bindings/display/bridge/nwl-dsi.yaml      | 15 ++-
 .../bindings/display/bridge/renesas,lvds.yaml | 18 ++--
 .../display/bridge/simple-bridge.yaml         | 18 ++--
 .../bindings/display/dsi-controller.yaml      | 10 +-
 .../bindings/display/ilitek,ili9486.yaml      |  4 +-
 .../bindings/display/ingenic,ipu.yaml         |  8 +-
 .../bindings/display/ingenic,lcd.yaml         | 10 +-
 .../devicetree/bindings/display/msm/gmu.yaml  | 38 ++++----
 .../panel/asus,z00t-tm5p5-nt35596.yaml        |  4 +-
 .../display/panel/boe,tv101wum-nl6.yaml       | 12 +--
 .../display/panel/elida,kd35t133.yaml         |  4 +-
 .../display/panel/feixin,k101-im2ba02.yaml    |  6 +-
 .../display/panel/ilitek,ili9322.yaml         |  3 +-
 .../display/panel/ilitek,ili9881c.yaml        |  3 +-
 .../display/panel/leadtek,ltk050h3146w.yaml   |  4 +-
 .../display/panel/leadtek,ltk500hd1829.yaml   |  4 +-
 .../display/panel/novatek,nt35510.yaml        |  4 +-
 .../bindings/display/panel/panel-dsi-cm.yaml  |  8 +-
 .../bindings/display/panel/panel-timing.yaml  | 20 ++--
 .../display/panel/raydium,rm68200.yaml        |  4 +-
 .../panel/samsung,s6e88a0-ams452ef01.yaml     |  4 +-
 .../display/panel/visionox,rm69299.yaml       |  2 +-
 .../bindings/display/st,stm32-dsi.yaml        |  3 +-
 .../bindings/display/ti/ti,j721e-dss.yaml     |  2 +-
 .../devicetree/bindings/dsp/fsl,dsp.yaml      |  4 +-
 .../devicetree/bindings/example-schema.yaml   |  4 +-
 .../devicetree/bindings/fsi/ibm,fsi2spi.yaml  |  2 +-
 .../bindings/gpio/brcm,xgs-iproc-gpio.yaml    |  6 +-
 .../bindings/gpio/renesas,rcar-gpio.yaml      | 58 +++++------
 .../devicetree/bindings/gpu/vivante,gc.yaml   |  3 +-
 .../bindings/hwmon/adi,axi-fan-control.yaml   |  2 +-
 .../devicetree/bindings/i2c/i2c-imx.yaml      | 32 +++----
 .../devicetree/bindings/i2c/i2c-pxa.yaml      |  4 +-
 .../bindings/iio/adc/adi,ad7606.yaml          |  8 +-
 .../bindings/iio/adc/maxim,max1238.yaml       |  2 +-
 .../bindings/iio/adc/qcom,spmi-vadc.yaml      | 19 ++--
 .../bindings/iio/adc/rockchip-saradc.yaml     |  8 +-
 .../bindings/iio/amplifiers/adi,hmc425a.yaml  |  4 +-
 .../bindings/iio/chemical/atlas,sensor.yaml   |  4 +-
 .../bindings/iio/dac/adi,ad5770r.yaml         | 60 ++++++------
 .../bindings/iio/light/vishay,vcnl4000.yaml   | 22 ++---
 .../iio/magnetometer/asahi-kasei,ak8975.yaml  | 16 ++--
 .../iio/proximity/vishay,vcnl3020.yaml        |  4 +-
 .../bindings/iio/temperature/adi,ltc2983.yaml |  2 +-
 .../devicetree/bindings/input/imx-keypad.yaml | 26 ++---
 .../input/touchscreen/cypress,cy8ctma140.yaml |  2 +-
 .../input/touchscreen/edt-ft5x06.yaml         | 10 +-
 .../bindings/input/touchscreen/goodix.yaml    |  5 +-
 .../input/touchscreen/touchscreen.yaml        | 12 +--
 .../bindings/interconnect/fsl,imx8m-noc.yaml  | 20 ++--
 .../bindings/interconnect/qcom,sc7180.yaml    |  2 +-
 .../bindings/interconnect/qcom,sdm845.yaml    |  2 +-
 .../interrupt-controller/arm,gic.yaml         |  4 +-
 .../interrupt-controller/ingenic,intc.yaml    | 22 ++---
 .../bindings/leds/backlight/qcom-wled.yaml    |  3 +-
 .../devicetree/bindings/mailbox/fsl,mu.yaml   | 12 +--
 .../bindings/mailbox/qcom-ipcc.yaml           |  2 +-
 .../allwinner,sun8i-a83t-de2-rotate.yaml      |  4 +-
 .../media/allwinner,sun8i-h3-deinterlace.yaml |  4 +-
 .../bindings/media/i2c/adv7180.yaml           | 43 ++++-----
 .../bindings/media/i2c/imi,rdacm2x-gmsl.yaml  |  2 +-
 .../bindings/media/i2c/maxim,max9286.yaml     |  2 +-
 .../devicetree/bindings/media/i2c/ov8856.yaml |  3 +-
 .../bindings/media/renesas,csi2.yaml          | 18 ++--
 .../bindings/media/rockchip-vpu.yaml          |  4 +-
 .../bindings/media/xilinx/xlnx,csi2rxss.yaml  | 15 ++-
 .../bindings/memory-controllers/fsl/mmdc.yaml | 12 +--
 .../memory-controllers/ingenic,nemc.yaml      |  8 +-
 .../memory-controllers/renesas,rpc-if.yaml    |  8 +-
 .../bindings/mfd/cirrus,madera.yaml           | 34 +++----
 .../bindings/mfd/gateworks-gsc.yaml           |  4 +-
 .../devicetree/bindings/mfd/st,stpmic1.yaml   | 24 ++---
 .../mfd/ti,j721e-system-controller.yaml       | 11 +--
 .../devicetree/bindings/mfd/wlf,arizona.yaml  | 22 ++---
 .../bindings/mmc/amlogic,meson-mx-sdhc.yaml   |  6 +-
 .../devicetree/bindings/mmc/ingenic,mmc.yaml  | 14 +--
 .../devicetree/bindings/mmc/renesas,sdhi.yaml |  6 +-
 .../bindings/mtd/arasan,nand-controller.yaml  |  8 +-
 .../devicetree/bindings/mtd/gpmi-nand.yaml    |  2 +-
 .../devicetree/bindings/mtd/mxc-nand.yaml     |  2 +-
 .../bindings/mtd/st,stm32-fmc2-nand.yaml      |  2 +-
 .../devicetree/bindings/net/dsa/dsa.yaml      |  4 +-
 .../devicetree/bindings/net/qcom,ipa.yaml     | 12 +--
 .../bindings/net/socionext,uniphier-ave4.yaml | 12 +--
 .../devicetree/bindings/net/stm32-dwmac.yaml  | 12 +--
 .../bindings/net/ti,cpsw-switch.yaml          | 62 ++++++------
 .../bindings/net/ti,k3-am654-cpsw-nuss.yaml   | 66 ++++++-------
 .../devicetree/bindings/nvmem/imx-ocotp.yaml  | 24 ++---
 .../bindings/nvmem/qcom,qfprom.yaml           |  4 +-
 .../phy/amlogic,meson-g12a-usb2-phy.yaml      |  6 +-
 .../bindings/phy/phy-rockchip-inno-usb2.yaml  |  6 +-
 .../devicetree/bindings/phy/qcom,qmp-phy.yaml | 13 ++-
 .../bindings/phy/qcom,qmp-usb3-dp-phy.yaml    |  9 +-
 .../bindings/phy/qcom,qusb2-phy.yaml          | 30 +++---
 .../phy/socionext,uniphier-pcie-phy.yaml      |  8 +-
 .../phy/socionext,uniphier-usb3hs-phy.yaml    | 10 +-
 .../phy/socionext,uniphier-usb3ss-phy.yaml    | 22 ++---
 .../bindings/phy/ti,phy-j721e-wiz.yaml        |  3 +-
 .../pinctrl/aspeed,ast2400-pinctrl.yaml       | 32 +++----
 .../pinctrl/aspeed,ast2500-pinctrl.yaml       | 36 +++----
 .../pinctrl/aspeed,ast2600-pinctrl.yaml       | 96 +++++++++----------
 .../bindings/pinctrl/ingenic,pinctrl.yaml     | 24 ++---
 .../pinctrl/qcom,ipq6018-pinctrl.yaml         | 54 +++++------
 .../bindings/pinctrl/qcom,sm8250-pinctrl.yaml | 32 +++----
 .../bindings/pinctrl/st,stm32-pinctrl.yaml    |  4 +-
 .../bindings/power/power-domain.yaml          | 14 +--
 .../bindings/power/supply/gpio-charger.yaml   |  4 +-
 .../regulator/qcom,smd-rpm-regulator.yaml     |  3 +-
 .../regulator/qcom-labibb-regulator.yaml      |  4 +-
 .../bindings/remoteproc/ti,k3-dsp-rproc.yaml  | 20 ++--
 .../bindings/reset/fsl,imx7-src.yaml          |  6 +-
 .../devicetree/bindings/rtc/ingenic,rtc.yaml  | 16 ++--
 .../bindings/serial/ingenic,uart.yaml         | 20 ++--
 .../soc/microchip/atmel,at91rm9200-tcb.yaml   | 12 +--
 .../bindings/soc/qcom/qcom,geni-se.yaml       | 30 +++---
 .../bindings/sound/amlogic,aiu.yaml           | 11 +--
 .../bindings/sound/amlogic,g12a-toacodec.yaml | 10 +-
 .../bindings/sound/cirrus,cs42l51.yaml        |  2 +-
 .../bindings/sound/ingenic,aic.yaml           | 12 +--
 .../bindings/sound/maxim,max98390.yaml        |  2 +-
 .../bindings/sound/rockchip-i2s.yaml          | 24 ++---
 .../bindings/sound/rockchip-spdif.yaml        |  4 +-
 .../devicetree/bindings/sound/tas2770.yaml    |  4 +-
 .../bindings/sound/tlv320adcx140.yaml         | 28 +++---
 .../bindings/spi/allwinner,sun6i-a31-spi.yaml |  8 +-
 .../devicetree/bindings/spi/fsl-imx-cspi.yaml | 26 ++---
 .../bindings/spi/mikrotik,rb4xx-spi.yaml      |  3 +-
 .../devicetree/bindings/spi/spi-mux.yaml      | 74 +++++++-------
 .../devicetree/bindings/spi/spi-rockchip.yaml | 14 +--
 .../thermal/thermal-cooling-devices.yaml      |  6 +-
 .../bindings/thermal/thermal-idle.yaml        | 45 +++++----
 .../devicetree/bindings/timer/fsl,imxgpt.yaml | 14 +--
 .../bindings/timer/ingenic,tcu.yaml           | 50 +++++-----
 .../bindings/timer/snps,dw-apb-timer.yaml     |  4 +-
 .../devicetree/bindings/trivial-devices.yaml  |  2 +-
 .../devicetree/bindings/usb/dwc2.yaml         | 31 +++---
 .../devicetree/bindings/usb/generic-ehci.yaml |  2 +-
 .../devicetree/bindings/usb/ingenic,musb.yaml |  8 +-
 .../bindings/usb/nvidia,tegra-xudc.yaml       | 10 +-
 .../devicetree/bindings/usb/ti,j721e-usb.yaml |  6 +-
 .../bindings/usb/ti,keystone-dwc3.yaml        |  4 +-
 .../devicetree/bindings/vendor-prefixes.yaml  |  3 +-
 166 files changed, 1103 insertions(+), 1113 deletions(-)

Comments

Sam Ravnborg Aug. 12, 2020, 9:34 p.m. UTC | #1
Hi Rob.

On Wed, Aug 12, 2020 at 02:36:18PM -0600, Rob Herring wrote:
> Clean-up incorrect indentation, extra spaces, long lines, and missing
> EOF newline in schema files. Most of the clean-ups are for list
> indentation which should always be 2 spaces more than the preceding
> keyword.
> 
> Found with yamllint (which I plan to integrate into the checks).

I have browsed through the patch - and there was only a few things
that jumped at me.

With these points considered:
Acked-by: Sam Ravnborg <sam@ravnborg.org>

I expect only some (few) of my points to actually results in any updates.

I look forward to have the lint functionality as part of the built-in
tools so we catch these things early.

	Sam

> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index f63895c8ce2d..88814a2a14a5 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -273,8 +273,8 @@ properties:
>                - fsl,imx6ull-14x14-evk     # i.MX6 UltraLiteLite 14x14 EVK Board
>                - kontron,imx6ull-n6411-som # Kontron N6411 SOM
>                - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
> -              - toradex,colibri-imx6ull-eval            # Colibri iMX6ULL Module on Colibri Evaluation Board
> -              - toradex,colibri-imx6ull-wifi-eval       # Colibri iMX6ULL Wi-Fi / Bluetooth Module on Colibri Evaluation Board
> +              - toradex,colibri-imx6ull-eval      # Colibri iMX6ULL Module on Colibri Eval Board
> +              - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board
>            - const: fsl,imx6ull

This change looks bad as it drops the alignment with the comments below.
See following patch chunck:

>
>        - description: Kontron N6411 S Board
> @@ -312,9 +312,12 @@ properties:
>                - toradex,colibri-imx7d                   # Colibri iMX7 Dual Module
>                - toradex,colibri-imx7d-aster             # Colibri iMX7 Dual Module on Aster Carrier Board
>                - toradex,colibri-imx7d-emmc              # Colibri iMX7 Dual 1GB (eMMC) Module
> -              - toradex,colibri-imx7d-emmc-aster        # Colibri iMX7 Dual 1GB (eMMC) Module on Aster Carrier Board
> -              - toradex,colibri-imx7d-emmc-eval-v3      # Colibri iMX7 Dual 1GB (eMMC) Module on Colibri Evaluation Board V3
> -              - toradex,colibri-imx7d-eval-v3           # Colibri iMX7 Dual Module on Colibri Evaluation Board V3
> +              - toradex,colibri-imx7d-emmc-aster        # Colibri iMX7 Dual 1GB (eMMC) Module on
> +                                                        #  Aster Carrier Board



> diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
> index 177d48c5bd97..e89c1ea62ffa 100644
> --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
> @@ -25,8 +25,7 @@ properties:
>    compatible:
>      items:
>        - enum:
> -        - dlink,dir-685-panel
> -
> +          - dlink,dir-685-panel
>        - const: ilitek,ili9322
>
>    reset-gpios: true
> diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
> index a39332276bab..76a9068a85dd 100644
> --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
> @@ -13,8 +13,7 @@ properties:
>    compatible:
>      items:
>        - enum:
> -        - bananapi,lhr050h41
> -
> +          - bananapi,lhr050h41
>        - const: ilitek,ili9881c
>

The extra lines is a simple way to indicate that here shall be added
more in the future. So I like the empty line.


> diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
> index 32e0896c6bc1..47938e372987 100644
> --- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
> +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
> @@ -79,7 +79,8 @@ properties:
>      description: |
>        kHz; switching frequency.
>      $ref: /schemas/types.yaml#/definitions/uint32
> -    enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ]
> +    enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920,
> +            2400, 3200, 4800, 9600 ]
>
>    qcom,ovp:
>      description: |

In the modern world we are living in now line length of 100 chars are
OK. checkpatch and coding_style is updated to reflected this.

> diff --git a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
> index 4ddb42a4ae05..9102feae90a2 100644
> --- a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
> +++ b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
> @@ -33,4 +33,5 @@ examples:
>          reg = <0x1f000000 0x10>;
>      };
>
> -...
> \ No newline at end of file
> +...
> +

Added one line too much?

 diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml
> index 0ae692dc28b5..3d3fed63409b 100644
> --- a/Documentation/devicetree/bindings/spi/spi-mux.yaml
> +++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml
> @@ -43,47 +43,47 @@ properties:
>      maxItems: 1
>
>  required:
> -   - compatible
> -   - reg
> -   - spi-max-frequency
> -   - mux-controls
> +  - compatible
> +  - reg
> +  - spi-max-frequency
> +  - mux-controls
>
>  examples:
> -   - |
> -     #include <dt-bindings/gpio/gpio.h>
> -     mux: mux-controller {
> -       compatible = "gpio-mux";
> -       #mux-control-cells = <0>;
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    mux: mux-controller {
> +        compatible = "gpio-mux";
> +        #mux-control-cells = <0>;
>
> -       mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
> -     };
> +        mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
> +    };

Example is updated to use 4-space indent. I like.

But many other examples are left untouched.

So I wonder if updating all examples to the same indent should
be left for another mega-patch?

> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> index f3d847832fdc..2baee2c817c1 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> @@ -993,7 +993,8 @@ patternProperties:
>    "^sst,.*":
>      description: Silicon Storage Technology, Inc.
>    "^sstar,.*":
> -    description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. (formerly part of MStar Semiconductor, Inc.)
> +    description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd.
> +      (formerly part of MStar Semiconductor, Inc.)
>    "^st,.*":
>      description: STMicroelectronics
>    "^starry,.*":

Did you check that they are all in alphabetical order?
I would be suprised if this is the only issue in this file.
Joe Perches Aug. 12, 2020, 10:32 p.m. UTC | #2
On Wed, 2020-08-12 at 14:36 -0600, Rob Herring wrote:
> Clean-up incorrect indentation, extra spaces, long lines, and missing
> EOF newline in schema files. Most of the clean-ups are for list
> indentation which should always be 2 spaces more than the preceding
                                     ^
> keyword.
[]
> diff --git a/Documentation/devicetree/bindings/arm/arm,integrator.yaml b/Documentation/devicetree/bindings/arm/arm,integrator.yaml
> index 192ded470e32..f0daf990e077 100644
> --- a/Documentation/devicetree/bindings/arm/arm,integrator.yaml
> +++ b/Documentation/devicetree/bindings/arm/arm,integrator.yaml
> @@ -67,9 +67,9 @@ patternProperties:
>        compatible:
>          items:
>            - enum:
> -            - arm,integrator-ap-syscon
> -            - arm,integrator-cp-syscon
> -            - arm,integrator-sp-syscon
> +              - arm,integrator-ap-syscon
> +              - arm,integrator-cp-syscon
> +              - arm,integrator-sp-syscon

Confused a bit here.
          - enum:
	10 spaces to dash
old line:
            - arm,integrator-ap-syscon
	12 spaces to dash
new line:
              - arm,integrator-ap-syscon
	14 spaces to dash

Is it supposed to be 2 spaces more than the preceding line
or 4 more?
Rob Herring Aug. 12, 2020, 10:41 p.m. UTC | #3
On Wed, Aug 12, 2020 at 3:34 PM Sam Ravnborg <sam@ravnborg.org> wrote:
>
> Hi Rob.
>
> On Wed, Aug 12, 2020 at 02:36:18PM -0600, Rob Herring wrote:
> > Clean-up incorrect indentation, extra spaces, long lines, and missing
> > EOF newline in schema files. Most of the clean-ups are for list
> > indentation which should always be 2 spaces more than the preceding
> > keyword.
> >
> > Found with yamllint (which I plan to integrate into the checks).
>
> I have browsed through the patch - and there was only a few things
> that jumped at me.
>
> With these points considered:
> Acked-by: Sam Ravnborg <sam@ravnborg.org>
>
> I expect only some (few) of my points to actually results in any updates.
>
> I look forward to have the lint functionality as part of the built-in
> tools so we catch these things early.
>
>         Sam
>
> > diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> > index f63895c8ce2d..88814a2a14a5 100644
> > --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> > +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> > @@ -273,8 +273,8 @@ properties:
> >                - fsl,imx6ull-14x14-evk     # i.MX6 UltraLiteLite 14x14 EVK Board
> >                - kontron,imx6ull-n6411-som # Kontron N6411 SOM
> >                - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
> > -              - toradex,colibri-imx6ull-eval            # Colibri iMX6ULL Module on Colibri Evaluation Board
> > -              - toradex,colibri-imx6ull-wifi-eval       # Colibri iMX6ULL Wi-Fi / Bluetooth Module on Colibri Evaluation Board
> > +              - toradex,colibri-imx6ull-eval      # Colibri iMX6ULL Module on Colibri Eval Board
> > +              - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board
> >            - const: fsl,imx6ull
>
> This change looks bad as it drops the alignment with the comments below.
> See following patch chunck:

Yes, but as a whole there's no alignment in this file. Even the rest
of the entries for the hunk below aren't aligned.

Perhaps this form would be better:

    # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board
  - toradex,colibri-imx6ull-wifi-eval

But I really don't want to go fix this in the whole file...

> >        - description: Kontron N6411 S Board
> > @@ -312,9 +312,12 @@ properties:
> >                - toradex,colibri-imx7d                   # Colibri iMX7 Dual Module
> >                - toradex,colibri-imx7d-aster             # Colibri iMX7 Dual Module on Aster Carrier Board
> >                - toradex,colibri-imx7d-emmc              # Colibri iMX7 Dual 1GB (eMMC) Module
> > -              - toradex,colibri-imx7d-emmc-aster        # Colibri iMX7 Dual 1GB (eMMC) Module on Aster Carrier Board
> > -              - toradex,colibri-imx7d-emmc-eval-v3      # Colibri iMX7 Dual 1GB (eMMC) Module on Colibri Evaluation Board V3
> > -              - toradex,colibri-imx7d-eval-v3           # Colibri iMX7 Dual Module on Colibri Evaluation Board V3
> > +              - toradex,colibri-imx7d-emmc-aster        # Colibri iMX7 Dual 1GB (eMMC) Module on
> > +                                                        #  Aster Carrier Board
>
>
>
> > diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
> > index 177d48c5bd97..e89c1ea62ffa 100644
> > --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
> > +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
> > @@ -25,8 +25,7 @@ properties:
> >    compatible:
> >      items:
> >        - enum:
> > -        - dlink,dir-685-panel
> > -
> > +          - dlink,dir-685-panel
> >        - const: ilitek,ili9322
> >
> >    reset-gpios: true
> > diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
> > index a39332276bab..76a9068a85dd 100644
> > --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
> > +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
> > @@ -13,8 +13,7 @@ properties:
> >    compatible:
> >      items:
> >        - enum:
> > -        - bananapi,lhr050h41
> > -
> > +          - bananapi,lhr050h41
> >        - const: ilitek,ili9881c
> >
>
> The extra lines is a simple way to indicate that here shall be added
> more in the future. So I like the empty line.

News to me. I thought 'enum' indicates that. My preference here is a
blank line just between DT properties.

> > diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
> > index 32e0896c6bc1..47938e372987 100644
> > --- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
> > +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
> > @@ -79,7 +79,8 @@ properties:
> >      description: |
> >        kHz; switching frequency.
> >      $ref: /schemas/types.yaml#/definitions/uint32
> > -    enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ]
> > +    enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920,
> > +            2400, 3200, 4800, 9600 ]
> >
> >    qcom,ovp:
> >      description: |
>
> In the modern world we are living in now line length of 100 chars are
> OK. checkpatch and coding_style is updated to reflected this.

Yes, and it was 102. For yamllint I actually put it at 110 just to get
to a reasonable number that I wanted to fix and warning free. I think
I fixed all non comment cases to be less than 100 and comments to be
up to 110.

> > diff --git a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
> > index 4ddb42a4ae05..9102feae90a2 100644
> > --- a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
> > +++ b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
> > @@ -33,4 +33,5 @@ examples:
> >          reg = <0x1f000000 0x10>;
> >      };
> >
> > -...
> > \ No newline at end of file
> > +...
> > +
>
> Added one line too much?

Indeed.

>  diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml
> > index 0ae692dc28b5..3d3fed63409b 100644
> > --- a/Documentation/devicetree/bindings/spi/spi-mux.yaml
> > +++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml
> > @@ -43,47 +43,47 @@ properties:
> >      maxItems: 1
> >
> >  required:
> > -   - compatible
> > -   - reg
> > -   - spi-max-frequency
> > -   - mux-controls
> > +  - compatible
> > +  - reg
> > +  - spi-max-frequency
> > +  - mux-controls
> >
> >  examples:
> > -   - |
> > -     #include <dt-bindings/gpio/gpio.h>
> > -     mux: mux-controller {
> > -       compatible = "gpio-mux";
> > -       #mux-control-cells = <0>;
> > +  - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +    mux: mux-controller {
> > +        compatible = "gpio-mux";
> > +        #mux-control-cells = <0>;
> >
> > -       mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
> > -     };
> > +        mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
> > +    };
>
> Example is updated to use 4-space indent. I like.
>
> But many other examples are left untouched.

That was not the purpose here. The '- |' line was indented 1 too many.
IIRC, the parser is not happy if you only change that line, so at
least the 1st line of the example had to be updated anyways.

> So I wonder if updating all examples to the same indent should
> be left for another mega-patch?

I've said this before, but until example indentation is automatically
checked I'm not going to care.

> > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> > index f3d847832fdc..2baee2c817c1 100644
> > --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
> > +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> > @@ -993,7 +993,8 @@ patternProperties:
> >    "^sst,.*":
> >      description: Silicon Storage Technology, Inc.
> >    "^sstar,.*":
> > -    description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. (formerly part of MStar Semiconductor, Inc.)
> > +    description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd.
> > +      (formerly part of MStar Semiconductor, Inc.)
> >    "^st,.*":
> >      description: STMicroelectronics
> >    "^starry,.*":
>
> Did you check that they are all in alphabetical order?
> I would be suprised if this is the only issue in this file.

Nope, as that's not a WS or linter thing. Alphabetical order is about
the only thing I look at reviewing additions to this, but I'm sure
some errors have slipped in.

Thanks for taking a look.


Rob
Rob Herring Aug. 12, 2020, 11:05 p.m. UTC | #4
On Wed, Aug 12, 2020 at 4:32 PM Joe Perches <joe@perches.com> wrote:
>
> On Wed, 2020-08-12 at 14:36 -0600, Rob Herring wrote:
> > Clean-up incorrect indentation, extra spaces, long lines, and missing
> > EOF newline in schema files. Most of the clean-ups are for list
> > indentation which should always be 2 spaces more than the preceding
>                                      ^
> > keyword.

keyword is the key part...

> []
> > diff --git a/Documentation/devicetree/bindings/arm/arm,integrator.yaml b/Documentation/devicetree/bindings/arm/arm,integrator.yaml
> > index 192ded470e32..f0daf990e077 100644
> > --- a/Documentation/devicetree/bindings/arm/arm,integrator.yaml
> > +++ b/Documentation/devicetree/bindings/arm/arm,integrator.yaml
> > @@ -67,9 +67,9 @@ patternProperties:
> >        compatible:
> >          items:
> >            - enum:
> > -            - arm,integrator-ap-syscon
> > -            - arm,integrator-cp-syscon
> > -            - arm,integrator-sp-syscon
> > +              - arm,integrator-ap-syscon
> > +              - arm,integrator-cp-syscon
> > +              - arm,integrator-sp-syscon
>
> Confused a bit here.
>           - enum:
>         10 spaces to dash
> old line:
>             - arm,integrator-ap-syscon
>         12 spaces to dash
> new line:
>               - arm,integrator-ap-syscon
>         14 spaces to dash
>
> Is it supposed to be 2 spaces more than the preceding line
> or 4 more?

If the preceding line is a list entry (i.e. starts with '-'), then
it's 4 more spaces. It's always 2 more spaces than the preceding
keyword start (aka json-schema vocabulary).

Arguably, this style is a bit inconsistent in that the '-' counts
toward as indentation of the current line, but not the preceding line.
However, I think this style is a bit less error prone and easier to
review. With the other style (always N more spaces) it's harder to
distinguish lists vs. dicts. For example, you can have something like
this:

- key:
  - foo
  - bar

- key:
    foo
    bar

- key:
  - foo
    bar

All 3 of these could be valid. Which one was intended? (Can't really
tell here, but you can with actual DT schema.)

Rob
Geert Uytterhoeven Aug. 13, 2020, 7:50 a.m. UTC | #5
Hi Rob,

On Wed, Aug 12, 2020 at 10:36 PM Rob Herring <robh@kernel.org> wrote:
> Clean-up incorrect indentation, extra spaces, long lines, and missing
> EOF newline in schema files. Most of the clean-ups are for list
> indentation which should always be 2 spaces more than the preceding
> keyword.
>
> Found with yamllint (which I plan to integrate into the checks).

> Signed-off-by: Rob Herring <robh@kernel.org>

Thanks for your patch!

> --- a/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml
> +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml
> @@ -24,9 +24,9 @@ properties:
>        - const: renesas,r8a7778-cpg-clocks # R-Car M1
>        - const: renesas,r8a7779-cpg-clocks # R-Car H1
>        - items:
> -        - enum:
> -            - renesas,r7s72100-cpg-clocks # RZ/A1H
> -        - const: renesas,rz-cpg-clocks    # RZ/A1
> +          - enum:
> +              - renesas,r7s72100-cpg-clocks # RZ/A1H
> +          - const: renesas,rz-cpg-clocks    # RZ/A1

This change breaks alignment of the comments at the end of each line.

>        - const: renesas,sh73a0-cpg-clocks  # SH-Mobile AG5

(I only checked the files I care about)

If you don't update commit  e0fe7fc6f2ca0781 ("dt-bindings: Whitespace
clean-ups in schema files"), I can send a patch after v5.9-rc1.

Gr{oetje,eeting}s,

                        Geert
Luca Ceresoli Aug. 13, 2020, 10:31 a.m. UTC | #6
Hi Rob,

On 12/08/20 22:36, Rob Herring wrote:
> Clean-up incorrect indentation, extra spaces, long lines, and missing
> EOF newline in schema files. Most of the clean-ups are for list
> indentation which should always be 2 spaces more than the preceding
> keyword.
> 
> Found with yamllint (which I plan to integrate into the checks).

[...]

> diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
> index 3d4e1685cc55..28c6461b9a9a 100644
> --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
> +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
> @@ -95,10 +95,10 @@ allOf:
>        # Devices without builtin crystal
>        properties:
>          clock-names:
> -            minItems: 1
> -            maxItems: 2
> -            items:
> -              enum: [ xin, clkin ]
> +          minItems: 1
> +          maxItems: 2
> +          items:
> +            enum: [ xin, clkin ]
>          clocks:
>            minItems: 1
>            maxItems: 2

Thanks for noticing, LGTM.

[...]

> diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
> index d7dac16a3960..36dc7b56a453 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
> +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
> @@ -33,8 +33,8 @@ properties:
>      $ref: /schemas/types.yaml#/definitions/uint32
>  
>    touchscreen-min-pressure:
> -    description: minimum pressure on the touchscreen to be achieved in order for the
> -                 touchscreen driver to report a touch event.
> +    description: minimum pressure on the touchscreen to be achieved in order
> +      for the touchscreen driver to report a touch event.

Out of personal taste, I find the original layout more pleasant and
readable. This third option is also good, especially for long descriptions:

  description:
    minimum pressure on the touchscreen to be achieved in order for the
    touchscreen driver to report a touch event.

At first glance yamllint seems to support exactly these two by default:

> With indentation: {spaces: 4, check-multi-line-strings: true}
> 
> the following code snippet would PASS:
> 
> Blaise Pascal:
>     Je vous écris une longue lettre parce que
>     je n'ai pas le temps d'en écrire une courte.
> 
> the following code snippet would PASS:
> 
> Blaise Pascal: Je vous écris une longue lettre parce que
>                je n'ai pas le temps d'en écrire une courte.
> 
> the following code snippet would FAIL:
> 
> Blaise Pascal: Je vous écris une longue lettre parce que
>   je n'ai pas le temps d'en écrire une courte.
> 
(https://yamllint.readthedocs.io/en/stable/rules.html#module-yamllint.rules.indentation)
Rob Herring Aug. 14, 2020, 2:51 p.m. UTC | #7
On Thu, Aug 13, 2020 at 4:31 AM Luca Ceresoli <luca@lucaceresoli.net> wrote:
>
> Hi Rob,
>
> On 12/08/20 22:36, Rob Herring wrote:
> > Clean-up incorrect indentation, extra spaces, long lines, and missing
> > EOF newline in schema files. Most of the clean-ups are for list
> > indentation which should always be 2 spaces more than the preceding
> > keyword.
> >
> > Found with yamllint (which I plan to integrate into the checks).
>
> [...]
>
> > diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
> > index 3d4e1685cc55..28c6461b9a9a 100644
> > --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
> > +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
> > @@ -95,10 +95,10 @@ allOf:
> >        # Devices without builtin crystal
> >        properties:
> >          clock-names:
> > -            minItems: 1
> > -            maxItems: 2
> > -            items:
> > -              enum: [ xin, clkin ]
> > +          minItems: 1
> > +          maxItems: 2
> > +          items:
> > +            enum: [ xin, clkin ]
> >          clocks:
> >            minItems: 1
> >            maxItems: 2
>
> Thanks for noticing, LGTM.
>
> [...]
>
> > diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
> > index d7dac16a3960..36dc7b56a453 100644
> > --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
> > +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
> > @@ -33,8 +33,8 @@ properties:
> >      $ref: /schemas/types.yaml#/definitions/uint32
> >
> >    touchscreen-min-pressure:
> > -    description: minimum pressure on the touchscreen to be achieved in order for the
> > -                 touchscreen driver to report a touch event.
> > +    description: minimum pressure on the touchscreen to be achieved in order
> > +      for the touchscreen driver to report a touch event.
>
> Out of personal taste, I find the original layout more pleasant and
> readable. This third option is also good, especially for long descriptions:
>
>   description:
>     minimum pressure on the touchscreen to be achieved in order for the
>     touchscreen driver to report a touch event.
>
> At first glance yamllint seems to support exactly these two by default:
>
> > With indentation: {spaces: 4, check-multi-line-strings: true}

Turning on check-multi-line-strings results in 10K+ warnings, so no.

The other issue is the style ruamel.yaml wants to write out is as the
patch does above. This matters when doing some scripted
transformations where we read in the files and write them back out. I
can somewhat work around that by first doing a pass with no changes
and then another pass with the actual changes, but that's completely
scriptable. Hopefully, ruamel learns to preserve the style better.

Rob
Luca Ceresoli Aug. 14, 2020, 4:30 p.m. UTC | #8
Hi,

On 14/08/20 16:51, Rob Herring wrote:
> On Thu, Aug 13, 2020 at 4:31 AM Luca Ceresoli <luca@lucaceresoli.net> wrote:
>>
>> Hi Rob,
>>
>> On 12/08/20 22:36, Rob Herring wrote:
>>> Clean-up incorrect indentation, extra spaces, long lines, and missing
>>> EOF newline in schema files. Most of the clean-ups are for list
>>> indentation which should always be 2 spaces more than the preceding
>>> keyword.
>>>
>>> Found with yamllint (which I plan to integrate into the checks).
>>
>> [...]
>>
>>> diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
>>> index 3d4e1685cc55..28c6461b9a9a 100644
>>> --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
>>> +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
>>> @@ -95,10 +95,10 @@ allOf:
>>>        # Devices without builtin crystal
>>>        properties:
>>>          clock-names:
>>> -            minItems: 1
>>> -            maxItems: 2
>>> -            items:
>>> -              enum: [ xin, clkin ]
>>> +          minItems: 1
>>> +          maxItems: 2
>>> +          items:
>>> +            enum: [ xin, clkin ]
>>>          clocks:
>>>            minItems: 1
>>>            maxItems: 2
>>
>> Thanks for noticing, LGTM.
>>
>> [...]
>>
>>> diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
>>> index d7dac16a3960..36dc7b56a453 100644
>>> --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
>>> +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
>>> @@ -33,8 +33,8 @@ properties:
>>>      $ref: /schemas/types.yaml#/definitions/uint32
>>>
>>>    touchscreen-min-pressure:
>>> -    description: minimum pressure on the touchscreen to be achieved in order for the
>>> -                 touchscreen driver to report a touch event.
>>> +    description: minimum pressure on the touchscreen to be achieved in order
>>> +      for the touchscreen driver to report a touch event.
>>
>> Out of personal taste, I find the original layout more pleasant and
>> readable. This third option is also good, especially for long descriptions:
>>
>>   description:
>>     minimum pressure on the touchscreen to be achieved in order for the
>>     touchscreen driver to report a touch event.
>>
>> At first glance yamllint seems to support exactly these two by default:
>>
>>> With indentation: {spaces: 4, check-multi-line-strings: true}
> 
> Turning on check-multi-line-strings results in 10K+ warnings, so no.
> 
> The other issue is the style ruamel.yaml wants to write out is as the
> patch does above. This matters when doing some scripted
> transformations where we read in the files and write them back out. I
> can somewhat work around that by first doing a pass with no changes
> and then another pass with the actual changes, but that's completely
> scriptable. Hopefully, ruamel learns to preserve the style better.

Kind of sad, but I understand the reason as far as my understanding of
the yaml world allows. Thanks for the explanation.

[For idt,versaclock5.yaml, plus an overview of whole patch]
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Jonathan Cameron Aug. 16, 2020, 8:44 a.m. UTC | #9
On Wed, 12 Aug 2020 23:34:53 +0200
Sam Ravnborg <sam@ravnborg.org> wrote:

> Hi Rob.
> 
> On Wed, Aug 12, 2020 at 02:36:18PM -0600, Rob Herring wrote:
> > Clean-up incorrect indentation, extra spaces, long lines, and missing
> > EOF newline in schema files. Most of the clean-ups are for list
> > indentation which should always be 2 spaces more than the preceding
> > keyword.
> > 
> > Found with yamllint (which I plan to integrate into the checks).  
> 
> I have browsed through the patch - and there was only a few things
> that jumped at me.
> 
> With these points considered:
> Acked-by: Sam Ravnborg <sam@ravnborg.org>

Replying here as the patch doesn't seem to have made it to linux-iio
at least. I'm not sure why...

Anyhow, found it in an lkml archive so for the iio changes
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

> 
> I expect only some (few) of my points to actually results in any updates.
> 
> I look forward to have the lint functionality as part of the built-in
> tools so we catch these things early.
> 
> 	Sam
> 
> > diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> > index f63895c8ce2d..88814a2a14a5 100644
> > --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> > +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> > @@ -273,8 +273,8 @@ properties:
> >                - fsl,imx6ull-14x14-evk     # i.MX6 UltraLiteLite 14x14 EVK Board
> >                - kontron,imx6ull-n6411-som # Kontron N6411 SOM
> >                - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
> > -              - toradex,colibri-imx6ull-eval            # Colibri iMX6ULL Module on Colibri Evaluation Board
> > -              - toradex,colibri-imx6ull-wifi-eval       # Colibri iMX6ULL Wi-Fi / Bluetooth Module on Colibri Evaluation Board
> > +              - toradex,colibri-imx6ull-eval      # Colibri iMX6ULL Module on Colibri Eval Board
> > +              - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board
> >            - const: fsl,imx6ull  
> 
> This change looks bad as it drops the alignment with the comments below.
> See following patch chunck:
> 
> >
> >        - description: Kontron N6411 S Board
> > @@ -312,9 +312,12 @@ properties:
> >                - toradex,colibri-imx7d                   # Colibri iMX7 Dual Module
> >                - toradex,colibri-imx7d-aster             # Colibri iMX7 Dual Module on Aster Carrier Board
> >                - toradex,colibri-imx7d-emmc              # Colibri iMX7 Dual 1GB (eMMC) Module
> > -              - toradex,colibri-imx7d-emmc-aster        # Colibri iMX7 Dual 1GB (eMMC) Module on Aster Carrier Board
> > -              - toradex,colibri-imx7d-emmc-eval-v3      # Colibri iMX7 Dual 1GB (eMMC) Module on Colibri Evaluation Board V3
> > -              - toradex,colibri-imx7d-eval-v3           # Colibri iMX7 Dual Module on Colibri Evaluation Board V3
> > +              - toradex,colibri-imx7d-emmc-aster        # Colibri iMX7 Dual 1GB (eMMC) Module on
> > +                                                        #  Aster Carrier Board  
> 
> 
> 
> > diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
> > index 177d48c5bd97..e89c1ea62ffa 100644
> > --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
> > +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
> > @@ -25,8 +25,7 @@ properties:
> >    compatible:
> >      items:
> >        - enum:
> > -        - dlink,dir-685-panel
> > -
> > +          - dlink,dir-685-panel
> >        - const: ilitek,ili9322
> >
> >    reset-gpios: true
> > diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
> > index a39332276bab..76a9068a85dd 100644
> > --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
> > +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
> > @@ -13,8 +13,7 @@ properties:
> >    compatible:
> >      items:
> >        - enum:
> > -        - bananapi,lhr050h41
> > -
> > +          - bananapi,lhr050h41
> >        - const: ilitek,ili9881c
> >  
> 
> The extra lines is a simple way to indicate that here shall be added
> more in the future. So I like the empty line.
> 
> 
> > diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
> > index 32e0896c6bc1..47938e372987 100644
> > --- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
> > +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
> > @@ -79,7 +79,8 @@ properties:
> >      description: |
> >        kHz; switching frequency.
> >      $ref: /schemas/types.yaml#/definitions/uint32
> > -    enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ]
> > +    enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920,
> > +            2400, 3200, 4800, 9600 ]
> >
> >    qcom,ovp:
> >      description: |  
> 
> In the modern world we are living in now line length of 100 chars are
> OK. checkpatch and coding_style is updated to reflected this.
> 
> > diff --git a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
> > index 4ddb42a4ae05..9102feae90a2 100644
> > --- a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
> > +++ b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
> > @@ -33,4 +33,5 @@ examples:
> >          reg = <0x1f000000 0x10>;
> >      };
> >
> > -...
> > \ No newline at end of file
> > +...
> > +  
> 
> Added one line too much?
> 
>  diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml
> > index 0ae692dc28b5..3d3fed63409b 100644
> > --- a/Documentation/devicetree/bindings/spi/spi-mux.yaml
> > +++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml
> > @@ -43,47 +43,47 @@ properties:
> >      maxItems: 1
> >
> >  required:
> > -   - compatible
> > -   - reg
> > -   - spi-max-frequency
> > -   - mux-controls
> > +  - compatible
> > +  - reg
> > +  - spi-max-frequency
> > +  - mux-controls
> >
> >  examples:
> > -   - |
> > -     #include <dt-bindings/gpio/gpio.h>
> > -     mux: mux-controller {
> > -       compatible = "gpio-mux";
> > -       #mux-control-cells = <0>;
> > +  - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +    mux: mux-controller {
> > +        compatible = "gpio-mux";
> > +        #mux-control-cells = <0>;
> >
> > -       mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
> > -     };
> > +        mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
> > +    };  
> 
> Example is updated to use 4-space indent. I like.
> 
> But many other examples are left untouched.
> 
> So I wonder if updating all examples to the same indent should
> be left for another mega-patch?
> 
> > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> > index f3d847832fdc..2baee2c817c1 100644
> > --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
> > +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> > @@ -993,7 +993,8 @@ patternProperties:
> >    "^sst,.*":
> >      description: Silicon Storage Technology, Inc.
> >    "^sstar,.*":
> > -    description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. (formerly part of MStar Semiconductor, Inc.)
> > +    description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd.
> > +      (formerly part of MStar Semiconductor, Inc.)
> >    "^st,.*":
> >      description: STMicroelectronics
> >    "^starry,.*":  
> 
> Did you check that they are all in alphabetical order?
> I would be suprised if this is the only issue in this file.
> 
>
Wolfram Sang Aug. 25, 2020, 7:10 a.m. UTC | #10
On Wed, Aug 12, 2020 at 02:36:18PM -0600, Rob Herring wrote:
> Clean-up incorrect indentation, extra spaces, long lines, and missing
> EOF newline in schema files. Most of the clean-ups are for list
> indentation which should always be 2 spaces more than the preceding
> keyword.
> 
> Found with yamllint (which I plan to integrate into the checks).
> 
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-clk@vger.kernel.org
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-spi@vger.kernel.org
> Cc: linux-gpio@vger.kernel.org
> Cc: linux-remoteproc@vger.kernel.org
> Cc: linux-hwmon@vger.kernel.org
> Cc: linux-i2c@vger.kernel.org
> Cc: linux-fbdev@vger.kernel.org
> Cc: linux-iio@vger.kernel.org
> Cc: linux-input@vger.kernel.org
> Cc: linux-pm@vger.kernel.org
> Cc: linux-media@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Cc: linux-mmc@vger.kernel.org
> Cc: linux-mtd@lists.infradead.org
> Cc: netdev@vger.kernel.org
> Cc: linux-rtc@vger.kernel.org
> Cc: linux-serial@vger.kernel.org
> Cc: linux-usb@vger.kernel.org
> Signed-off-by: Rob Herring <robh@kernel.org>

I trust you guys in figuring out the details, so for touching I2C:

Acked-by: Wolfram Sang <wsa@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/arm,integrator.yaml b/Documentation/devicetree/bindings/arm/arm,integrator.yaml
index 192ded470e32..f0daf990e077 100644
--- a/Documentation/devicetree/bindings/arm/arm,integrator.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,integrator.yaml
@@ -67,9 +67,9 @@  patternProperties:
       compatible:
         items:
           - enum:
-            - arm,integrator-ap-syscon
-            - arm,integrator-cp-syscon
-            - arm,integrator-sp-syscon
+              - arm,integrator-ap-syscon
+              - arm,integrator-cp-syscon
+              - arm,integrator-sp-syscon
           - const: syscon
       reg:
         maxItems: 1
diff --git a/Documentation/devicetree/bindings/arm/arm,realview.yaml b/Documentation/devicetree/bindings/arm/arm,realview.yaml
index d6e85d198afe..1d0b4e2bc7d2 100644
--- a/Documentation/devicetree/bindings/arm/arm,realview.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,realview.yaml
@@ -55,20 +55,20 @@  properties:
       compatible:
         oneOf:
           - items:
-            - const: arm,realview-eb-soc
-            - const: simple-bus
+              - const: arm,realview-eb-soc
+              - const: simple-bus
           - items:
-            - const: arm,realview-pb1176-soc
-            - const: simple-bus
+              - const: arm,realview-pb1176-soc
+              - const: simple-bus
           - items:
-            - const: arm,realview-pb11mp-soc
-            - const: simple-bus
+              - const: arm,realview-pb11mp-soc
+              - const: simple-bus
           - items:
-            - const: arm,realview-pba8-soc
-            - const: simple-bus
+              - const: arm,realview-pba8-soc
+              - const: simple-bus
           - items:
-            - const: arm,realview-pbx-soc
-            - const: simple-bus
+              - const: arm,realview-pbx-soc
+              - const: simple-bus
 
     patternProperties:
       "^.*syscon@[0-9a-f]+$":
@@ -79,35 +79,35 @@  properties:
           compatible:
             oneOf:
               - items:
-                - const: arm,realview-eb11mp-revb-syscon
-                - const: arm,realview-eb-syscon
-                - const: syscon
-                - const: simple-mfd
+                  - const: arm,realview-eb11mp-revb-syscon
+                  - const: arm,realview-eb-syscon
+                  - const: syscon
+                  - const: simple-mfd
               - items:
-                - const: arm,realview-eb11mp-revc-syscon
-                - const: arm,realview-eb-syscon
-                - const: syscon
-                - const: simple-mfd
+                  - const: arm,realview-eb11mp-revc-syscon
+                  - const: arm,realview-eb-syscon
+                  - const: syscon
+                  - const: simple-mfd
               - items:
-                - const: arm,realview-eb-syscon
-                - const: syscon
-                - const: simple-mfd
+                  - const: arm,realview-eb-syscon
+                  - const: syscon
+                  - const: simple-mfd
               - items:
-                - const: arm,realview-pb1176-syscon
-                - const: syscon
-                - const: simple-mfd
+                  - const: arm,realview-pb1176-syscon
+                  - const: syscon
+                  - const: simple-mfd
               - items:
-                - const: arm,realview-pb11mp-syscon
-                - const: syscon
-                - const: simple-mfd
+                  - const: arm,realview-pb11mp-syscon
+                  - const: syscon
+                  - const: simple-mfd
               - items:
-                - const: arm,realview-pba8-syscon
-                - const: syscon
-                - const: simple-mfd
+                  - const: arm,realview-pba8-syscon
+                  - const: syscon
+                  - const: simple-mfd
               - items:
-                - const: arm,realview-pbx-syscon
-                - const: syscon
-                - const: simple-mfd
+                  - const: arm,realview-pbx-syscon
+                  - const: syscon
+                  - const: simple-mfd
 
         required:
           - compatible
diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
index a3420c81cf35..26829a803fda 100644
--- a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
@@ -165,10 +165,10 @@  patternProperties:
       compatible:
         oneOf:
           - items:
-            - enum:
-              - arm,vexpress,v2m-p1
-              - arm,vexpress,v2p-p1
-            - const: simple-bus
+              - enum:
+                  - arm,vexpress,v2m-p1
+                  - arm,vexpress,v2p-p1
+              - const: simple-bus
           - const: simple-bus
       motherboard:
         type: object
@@ -186,8 +186,8 @@  patternProperties:
           compatible:
             items:
               - enum:
-                - arm,vexpress,v2m-p1
-                - arm,vexpress,v2p-p1
+                  - arm,vexpress,v2m-p1
+                  - arm,vexpress,v2p-p1
               - const: simple-bus
           arm,v2m-memory-map:
             description: This describes the memory map type.
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
index b5ef2666e6b2..497600a2ffb9 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
@@ -15,7 +15,7 @@  properties:
   compatible:
     items:
       - enum:
-        - brcm,bcm28155-ap
+          - brcm,bcm28155-ap
       - const: brcm,bcm11351
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
index aafbd6a27708..e0ee931723dc 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
@@ -15,7 +15,7 @@  properties:
   compatible:
     items:
       - enum:
-        - brcm,bcm21664-garnet
+          - brcm,bcm21664-garnet
       - const: brcm,bcm21664
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
index c4b4efd28a55..40d12ea56e54 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
@@ -15,7 +15,7 @@  properties:
   compatible:
     items:
       - enum:
-        - brcm,bcm23550-sparrow
+          - brcm,bcm23550-sparrow
       - const: brcm,bcm23550
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
index fe111e72dac3..9ba7b16e1fc4 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
@@ -7,8 +7,8 @@  $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Broadcom Cygnus device tree bindings
 
 maintainers:
-   - Ray Jui <rjui@broadcom.com>
-   - Scott Branden <sbranden@broadcom.com>
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
 
 properties:
   $nodename:
@@ -16,14 +16,14 @@  properties:
   compatible:
     items:
       - enum:
-        - brcm,bcm11300
-        - brcm,bcm11320
-        - brcm,bcm11350
-        - brcm,bcm11360
-        - brcm,bcm58300
-        - brcm,bcm58302
-        - brcm,bcm58303
-        - brcm,bcm58305
+          - brcm,bcm11300
+          - brcm,bcm11320
+          - brcm,bcm11350
+          - brcm,bcm11360
+          - brcm,bcm58300
+          - brcm,bcm58302
+          - brcm,bcm58303
+          - brcm,bcm58305
       - const: brcm,cygnus
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
index 1158f49b0b83..ae614b6722c2 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
@@ -21,7 +21,7 @@  properties:
   compatible:
     items:
       - enum:
-        - ubnt,unifi-switch8
+          - ubnt,unifi-switch8
       - const: brcm,bcm53342
       - const: brcm,hr2
 
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
index 2451704f87f0..0749adf94c28 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
@@ -16,8 +16,8 @@  properties:
   compatible:
     items:
       - enum:
-        - brcm,ns2-svk
-        - brcm,ns2-xmc
+          - brcm,ns2-svk
+          - brcm,ns2-xmc
       - const: brcm,ns2
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
index fe364cebf57f..8c2cacb2bb4f 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
@@ -24,13 +24,13 @@  properties:
   compatible:
     items:
       - enum:
-        - brcm,bcm58522
-        - brcm,bcm58525
-        - brcm,bcm58535
-        - brcm,bcm58622
-        - brcm,bcm58623
-        - brcm,bcm58625
-        - brcm,bcm88312
+          - brcm,bcm58522
+          - brcm,bcm58525
+          - brcm,bcm58535
+          - brcm,bcm58622
+          - brcm,bcm58623
+          - brcm,bcm58625
+          - brcm,bcm88312
       - const: brcm,nsp
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
index 4ad2b2124ab4..c13cb96545a2 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
@@ -16,9 +16,9 @@  properties:
   compatible:
     items:
       - enum:
-        - brcm,bcm958742k
-        - brcm,bcm958742t
-        - brcm,bcm958802a802x
+          - brcm,bcm958742k
+          - brcm,bcm958742t
+          - brcm,bcm958802a802x
       - const: brcm,stingray
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
index c5b6f31c20b9..ccdf9f99cb2b 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
@@ -15,8 +15,8 @@  properties:
   compatible:
     items:
       - enum:
-        - brcm,vulcan-eval
-        - cavium,thunderx2-cn9900
+          - brcm,vulcan-eval
+          - cavium,thunderx2-cn9900
       - const: brcm,vulcan-soc
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml
index 17df5cd12d8d..e42ff69d8bfb 100644
--- a/Documentation/devicetree/bindings/arm/coresight-cti.yaml
+++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml
@@ -82,12 +82,12 @@  properties:
   compatible:
     oneOf:
       - items:
-        - const: arm,coresight-cti
-        - const: arm,primecell
+          - const: arm,coresight-cti
+          - const: arm,primecell
       - items:
-        - const: arm,coresight-cti-v8-arch
-        - const: arm,coresight-cti
-        - const: arm,primecell
+          - const: arm,coresight-cti-v8-arch
+          - const: arm,coresight-cti
+          - const: arm,primecell
 
   reg:
     maxItems: 1
@@ -191,16 +191,16 @@  patternProperties:
 
     anyOf:
       - required:
-        - arm,trig-in-sigs
+          - arm,trig-in-sigs
       - required:
-        - arm,trig-out-sigs
+          - arm,trig-out-sigs
     oneOf:
       - required:
-        - arm,trig-conn-name
+          - arm,trig-conn-name
       - required:
-        - cpu
+          - cpu
       - required:
-        - arm,cs-dev-assoc
+          - arm,cs-dev-assoc
     required:
       - reg
 
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 40f692c846f0..1222bf1831fa 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -330,8 +330,8 @@  if:
     - enable-method
 
 then:
-   required:
-     - secondary-boot-reg
+  required:
+    - secondary-boot-reg
 
 required:
   - device_type
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index f63895c8ce2d..88814a2a14a5 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -273,8 +273,8 @@  properties:
               - fsl,imx6ull-14x14-evk     # i.MX6 UltraLiteLite 14x14 EVK Board
               - kontron,imx6ull-n6411-som # Kontron N6411 SOM
               - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
-              - toradex,colibri-imx6ull-eval            # Colibri iMX6ULL Module on Colibri Evaluation Board
-              - toradex,colibri-imx6ull-wifi-eval       # Colibri iMX6ULL Wi-Fi / Bluetooth Module on Colibri Evaluation Board
+              - toradex,colibri-imx6ull-eval      # Colibri iMX6ULL Module on Colibri Eval Board
+              - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board
           - const: fsl,imx6ull
 
       - description: Kontron N6411 S Board
@@ -312,9 +312,12 @@  properties:
               - toradex,colibri-imx7d                   # Colibri iMX7 Dual Module
               - toradex,colibri-imx7d-aster             # Colibri iMX7 Dual Module on Aster Carrier Board
               - toradex,colibri-imx7d-emmc              # Colibri iMX7 Dual 1GB (eMMC) Module
-              - toradex,colibri-imx7d-emmc-aster        # Colibri iMX7 Dual 1GB (eMMC) Module on Aster Carrier Board
-              - toradex,colibri-imx7d-emmc-eval-v3      # Colibri iMX7 Dual 1GB (eMMC) Module on Colibri Evaluation Board V3
-              - toradex,colibri-imx7d-eval-v3           # Colibri iMX7 Dual Module on Colibri Evaluation Board V3
+              - toradex,colibri-imx7d-emmc-aster        # Colibri iMX7 Dual 1GB (eMMC) Module on 
+                                                        #  Aster Carrier Board
+              - toradex,colibri-imx7d-emmc-eval-v3      # Colibri iMX7 Dual 1GB (eMMC) Module on 
+                                                        #  Colibri Evaluation Board V3
+              - toradex,colibri-imx7d-eval-v3           # Colibri iMX7 Dual Module on 
+                                                        #  Colibri Evaluation Board V3
               - tq,imx7d-mba7             # i.MX7D TQ MBa7 with TQMa7D SoM
               - zii,imx7d-rmu2            # ZII RMU2 Board
               - zii,imx7d-rpu2            # ZII RPU2 Board
diff --git a/Documentation/devicetree/bindings/arm/intel,keembay.yaml b/Documentation/devicetree/bindings/arm/intel,keembay.yaml
index 4d925785f504..06a7b05f435f 100644
--- a/Documentation/devicetree/bindings/arm/intel,keembay.yaml
+++ b/Documentation/devicetree/bindings/arm/intel,keembay.yaml
@@ -14,6 +14,6 @@  properties:
   compatible:
     items:
       - enum:
-        - intel,keembay-evm
+          - intel,keembay-evm
       - const: intel,keembay
 ...
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
index e271c4682ebc..1af30174b2d0 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
@@ -17,22 +17,22 @@  properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - mediatek,mt2701-pericfg
-          - mediatek,mt2712-pericfg
-          - mediatek,mt6765-pericfg
-          - mediatek,mt7622-pericfg
-          - mediatek,mt7629-pericfg
-          - mediatek,mt8135-pericfg
-          - mediatek,mt8173-pericfg
-          - mediatek,mt8183-pericfg
-          - mediatek,mt8516-pericfg
-        - const: syscon
+          - enum:
+              - mediatek,mt2701-pericfg
+              - mediatek,mt2712-pericfg
+              - mediatek,mt6765-pericfg
+              - mediatek,mt7622-pericfg
+              - mediatek,mt7629-pericfg
+              - mediatek,mt8135-pericfg
+              - mediatek,mt8173-pericfg
+              - mediatek,mt8183-pericfg
+              - mediatek,mt8516-pericfg
+          - const: syscon
       - items:
-        # Special case for mt7623 for backward compatibility
-        - const: mediatek,mt7623-pericfg
-        - const: mediatek,mt2701-pericfg
-        - const: syscon
+          # Special case for mt7623 for backward compatibility
+          - const: mediatek,mt7623-pericfg
+          - const: mediatek,mt2701-pericfg
+          - const: syscon
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml
index 68b0131a31d0..37ba3337f944 100644
--- a/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml
+++ b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml
@@ -19,7 +19,7 @@  description: |
   reported to the APB terminator (APB Errors Handler Block).
 
 allOf:
- - $ref: /schemas/simple-bus.yaml#
+  - $ref: /schemas/simple-bus.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml
index 29e1aaea132b..0bee4694578a 100644
--- a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml
+++ b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml
@@ -23,7 +23,7 @@  description: |
   accessible by means of the Baikal-T1 System Controller.
 
 allOf:
- - $ref: /schemas/simple-bus.yaml#
+  - $ref: /schemas/simple-bus.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
index 3d4e1685cc55..28c6461b9a9a 100644
--- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
+++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
@@ -95,10 +95,10 @@  allOf:
       # Devices without builtin crystal
       properties:
         clock-names:
-            minItems: 1
-            maxItems: 2
-            items:
-              enum: [ xin, clkin ]
+          minItems: 1
+          maxItems: 2
+          items:
+            enum: [ xin, clkin ]
         clocks:
           minItems: 1
           maxItems: 2
diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
index a952d5811823..5dd7ea8a78e4 100644
--- a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
+++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
@@ -47,12 +47,12 @@  properties:
   compatible:
     items:
       - enum:
-        - ingenic,jz4740-cgu
-        - ingenic,jz4725b-cgu
-        - ingenic,jz4770-cgu
-        - ingenic,jz4780-cgu
-        - ingenic,x1000-cgu
-        - ingenic,x1830-cgu
+          - ingenic,jz4740-cgu
+          - ingenic,jz4725b-cgu
+          - ingenic,jz4770-cgu
+          - ingenic,jz4780-cgu
+          - ingenic,x1000-cgu
+          - ingenic,x1830-cgu
       - const: simple-mfd
     minItems: 1
 
@@ -68,8 +68,8 @@  properties:
     items:
       - const: ext
       - enum:
-        - rtc
-        - osc32k # Different name, same clock
+          - rtc
+          - osc32k # Different name, same clock
 
   assigned-clocks:
     minItems: 1
diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
index 1b16a863b355..af32dee14fc6 100644
--- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
@@ -65,7 +65,7 @@  properties:
 
   protected-clocks:
     description:
-       Protected clock specifier list as per common clock binding
+      Protected clock specifier list as per common clock binding
 
   vdd-gfx-supply:
     description:
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml
index b83f4138f2f8..f110f9729aba 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml
@@ -24,9 +24,9 @@  properties:
       - const: renesas,r8a7778-cpg-clocks # R-Car M1
       - const: renesas,r8a7779-cpg-clocks # R-Car H1
       - items:
-        - enum:
-            - renesas,r7s72100-cpg-clocks # RZ/A1H
-        - const: renesas,rz-cpg-clocks    # RZ/A1
+          - enum:
+              - renesas,r7s72100-cpg-clocks # RZ/A1H
+          - const: renesas,rz-cpg-clocks    # RZ/A1
       - const: renesas,sh73a0-cpg-clocks  # SH-Mobile AG5
 
   reg:
diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
index 29813873cfbc..c6d091518650 100644
--- a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
@@ -16,7 +16,7 @@  properties:
   "#clock-cells":
     const: 1
 
-  compatible :
+  compatible:
     enum:
       - sprd,sc9863a-ap-clk
       - sprd,sc9863a-aon-clk
diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
index 2c4c34e3bc29..04099f5bea3f 100644
--- a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
@@ -162,14 +162,13 @@  required:
 additionalProperties: false
 
 examples:
- - |
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/imx8mq-reset.h>
 
-   #include <dt-bindings/clock/imx8mq-clock.h>
-   #include <dt-bindings/gpio/gpio.h>
-   #include <dt-bindings/interrupt-controller/arm-gic.h>
-   #include <dt-bindings/reset/imx8mq-reset.h>
-
-   mipi_dsi: mipi_dsi@30a00000 {
+    mipi_dsi: mipi_dsi@30a00000 {
               #address-cells = <1>;
               #size-cells = <0>;
               compatible = "fsl,imx8mq-nwl-dsi";
@@ -224,4 +223,4 @@  examples:
                            };
                     };
               };
-      };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
index 98c7330a9485..baaf2a2a6fed 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
@@ -119,17 +119,17 @@  then:
         # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks.
         # These clocks are optional.
         - enum:
-          - extal
-          - dclkin.0
-          - dclkin.1
+            - extal
+            - dclkin.0
+            - dclkin.1
         - enum:
-          - extal
-          - dclkin.0
-          - dclkin.1
+            - extal
+            - dclkin.0
+            - dclkin.1
         - enum:
-          - extal
-          - dclkin.0
-          - dclkin.1
+            - extal
+            - dclkin.0
+            - dclkin.1
 
   required:
     - clock-names
diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
index 0880cbf217d5..3ddb35fcf0a2 100644
--- a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
@@ -18,16 +18,16 @@  properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - ti,ths8134a
-          - ti,ths8134b
-        - const: ti,ths8134
+          - enum:
+              - ti,ths8134a
+              - ti,ths8134b
+          - const: ti,ths8134
       - enum:
-        - adi,adv7123
-        - dumb-vga-dac
-        - ti,opa362
-        - ti,ths8134
-        - ti,ths8135
+          - adi,adv7123
+          - dumb-vga-dac
+          - ti,opa362
+          - ti,ths8134
+          - ti,ths8135
 
   ports:
     type: object
diff --git a/Documentation/devicetree/bindings/display/dsi-controller.yaml b/Documentation/devicetree/bindings/display/dsi-controller.yaml
index 85b71b1fd28a..a02039e3aca0 100644
--- a/Documentation/devicetree/bindings/display/dsi-controller.yaml
+++ b/Documentation/devicetree/bindings/display/dsi-controller.yaml
@@ -55,11 +55,11 @@  patternProperties:
       clock-master:
         type: boolean
         description:
-           Should be enabled if the host is being used in conjunction with
-           another DSI host to drive the same peripheral. Hardware supporting
-           such a configuration generally requires the data on both the busses
-           to be driven by the same clock. Only the DSI host instance
-           controlling this clock should contain this property.
+          Should be enabled if the host is being used in conjunction with
+          another DSI host to drive the same peripheral. Hardware supporting
+          such a configuration generally requires the data on both the busses
+          to be driven by the same clock. Only the DSI host instance
+          controlling this clock should contain this property.
 
       enforce-video-mode:
         type: boolean
diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
index 66e93e563653..aecff34f505d 100644
--- a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
+++ b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
@@ -21,9 +21,9 @@  properties:
     items:
       - enum:
           # Waveshare 3.5" 320x480 Color TFT LCD
-        - waveshare,rpi-lcd-35
+          - waveshare,rpi-lcd-35
           # Ozzmaker 3.5" 320x480 Color TFT LCD
-        - ozzmaker,piscreen
+          - ozzmaker,piscreen
       - const: ilitek,ili9486
 
   spi-max-frequency:
diff --git a/Documentation/devicetree/bindings/display/ingenic,ipu.yaml b/Documentation/devicetree/bindings/display/ingenic,ipu.yaml
index 5bfc33eb32c9..12064a8e7a92 100644
--- a/Documentation/devicetree/bindings/display/ingenic,ipu.yaml
+++ b/Documentation/devicetree/bindings/display/ingenic,ipu.yaml
@@ -13,11 +13,11 @@  properties:
   compatible:
     oneOf:
       - enum:
-        - ingenic,jz4725b-ipu
-        - ingenic,jz4760-ipu
+          - ingenic,jz4725b-ipu
+          - ingenic,jz4760-ipu
       - items:
-        - const: ingenic,jz4770-ipu
-        - const: ingenic,jz4760-ipu
+          - const: ingenic,jz4770-ipu
+          - const: ingenic,jz4760-ipu
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
index d56db1802fad..768050f30dba 100644
--- a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
+++ b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
@@ -58,11 +58,11 @@  properties:
       - port@0
 
 required:
-    - compatible
-    - reg
-    - interrupts
-    - clocks
-    - clock-names
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
 
 if:
   properties:
diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml
index 0b8736a9384e..53056dd02597 100644
--- a/Documentation/devicetree/bindings/display/msm/gmu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml
@@ -38,10 +38,10 @@  properties:
 
   clocks:
     items:
-     - description: GMU clock
-     - description: GPU CX clock
-     - description: GPU AXI clock
-     - description: GPU MEMNOC clock
+      - description: GMU clock
+      - description: GPU CX clock
+      - description: GPU AXI clock
+      - description: GPU MEMNOC clock
 
   clock-names:
     items:
@@ -52,8 +52,8 @@  properties:
 
   interrupts:
     items:
-     - description: GMU HFI interrupt
-     - description: GMU interrupt
+      - description: GMU HFI interrupt
+      - description: GMU interrupt
 
 
   interrupt-names:
@@ -62,14 +62,14 @@  properties:
       - const: gmu
 
   power-domains:
-     items:
-       - description: CX power domain
-       - description: GX power domain
+    items:
+      - description: CX power domain
+      - description: GX power domain
 
   power-domain-names:
-     items:
-       - const: cx
-       - const: gx
+    items:
+      - const: cx
+      - const: gx
 
   iommus:
     maxItems: 1
@@ -90,13 +90,13 @@  required:
   - operating-points-v2
 
 examples:
- - |
-   #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
-   #include <dt-bindings/clock/qcom,gcc-sdm845.h>
-   #include <dt-bindings/interrupt-controller/irq.h>
-   #include <dt-bindings/interrupt-controller/arm-gic.h>
+  - |
+    #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-   gmu: gmu@506a000 {
+    gmu: gmu@506a000 {
         compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
 
         reg = <0x506a000 0x30000>,
@@ -120,4 +120,4 @@  examples:
 
         iommus = <&adreno_smmu 5>;
         operating-points-v2 = <&gmu_opp_table>;
-   };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml b/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
index 083d2b9d0c69..75a09df68ba0 100644
--- a/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
+++ b/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
@@ -24,9 +24,9 @@  properties:
   reg: true
   reset-gpios: true
   vdd-supply:
-     description: core voltage supply
+    description: core voltage supply
   vddio-supply:
-     description: vddio supply
+    description: vddio supply
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
index 7f5df5851017..38bc1d1b511e 100644
--- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
@@ -48,12 +48,12 @@  properties:
   port: true
 
 required:
- - compatible
- - reg
- - enable-gpios
- - pp1800-supply
- - avdd-supply
- - avee-supply
+  - compatible
+  - reg
+  - enable-gpios
+  - pp1800-supply
+  - avdd-supply
+  - avee-supply
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml
index aa761f697b7a..7adb83e2e8d9 100644
--- a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml
+++ b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml
@@ -19,9 +19,9 @@  properties:
   backlight: true
   reset-gpios: true
   iovcc-supply:
-     description: regulator that supplies the iovcc voltage
+    description: regulator that supplies the iovcc voltage
   vdd-supply:
-     description: regulator that supplies the vdd voltage
+    description: regulator that supplies the vdd voltage
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml
index 927f1eea18d2..81adb82f061d 100644
--- a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml
+++ b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml
@@ -19,11 +19,11 @@  properties:
   backlight: true
   reset-gpios: true
   avdd-supply:
-     description: regulator that supplies the AVDD voltage
+    description: regulator that supplies the AVDD voltage
   dvdd-supply:
-     description: regulator that supplies the DVDD voltage
+    description: regulator that supplies the DVDD voltage
   cvdd-supply:
-     description: regulator that supplies the CVDD voltage
+    description: regulator that supplies the CVDD voltage
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
index 177d48c5bd97..e89c1ea62ffa 100644
--- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
@@ -25,8 +25,7 @@  properties:
   compatible:
     items:
       - enum:
-        - dlink,dir-685-panel
-
+          - dlink,dir-685-panel
       - const: ilitek,ili9322
 
   reset-gpios: true
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
index a39332276bab..76a9068a85dd 100644
--- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
@@ -13,8 +13,7 @@  properties:
   compatible:
     items:
       - enum:
-        - bananapi,lhr050h41
-
+          - bananapi,lhr050h41
       - const: ilitek,ili9881c
 
   backlight: true
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
index a372bdc5bde1..3715882b63b6 100644
--- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
@@ -21,9 +21,9 @@  properties:
   backlight: true
   reset-gpios: true
   iovcc-supply:
-     description: regulator that supplies the iovcc voltage
+    description: regulator that supplies the iovcc voltage
   vci-supply:
-     description: regulator that supplies the vci voltage
+    description: regulator that supplies the vci voltage
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
index b900973b5f7b..c5944b4d636c 100644
--- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
@@ -19,9 +19,9 @@  properties:
   backlight: true
   reset-gpios: true
   iovcc-supply:
-     description: regulator that supplies the iovcc voltage
+    description: regulator that supplies the iovcc voltage
   vcc-supply:
-     description: regulator that supplies the vcc voltage
+    description: regulator that supplies the vcc voltage
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
index 73d2ff3baaff..bc92928c805b 100644
--- a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
@@ -25,9 +25,9 @@  properties:
   reg: true
   reset-gpios: true
   vdd-supply:
-     description: regulator that supplies the vdd voltage
+    description: regulator that supplies the vdd voltage
   vddi-supply:
-     description: regulator that supplies the vddi voltage
+    description: regulator that supplies the vddi voltage
   backlight: true
 
 required:
diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml
index d766c949c622..4a36aa64c716 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml
@@ -27,10 +27,10 @@  properties:
   compatible:
     items:
       - enum:
-        - motorola,droid4-panel        # Panel from Motorola Droid4 phone
-        - nokia,himalaya               # Panel from Nokia N950 phone
-        - tpo,taal                     # Panel from OMAP4 SDP board
-      - const: panel-dsi-cm            # Generic DSI command mode panel compatible fallback
+          - motorola,droid4-panel        # Panel from Motorola Droid4 phone
+          - nokia,himalaya               # Panel from Nokia N950 phone
+          - tpo,taal                     # Panel from OMAP4 SDP board
+      - const: panel-dsi-cm              # Generic DSI command mode panel compatible fallback
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
index 182c19cb7fdd..9bf592dc3033 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
@@ -59,7 +59,7 @@  description: |
 properties:
 
   clock-frequency:
-   description: Panel clock in Hz
+    description: Panel clock in Hz
 
   hactive:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -200,15 +200,15 @@  properties:
     description: Enable double clock mode
 
 required:
- - clock-frequency
- - hactive
- - vactive
- - hfront-porch
- - hback-porch
- - hsync-len
- - vfront-porch
- - vback-porch
- - vsync-len
+  - clock-frequency
+  - hactive
+  - vactive
+  - hfront-porch
+  - hback-porch
+  - hsync-len
+  - vfront-porch
+  - vback-porch
+  - vsync-len
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml
index a35ba16fc000..39477793d289 100644
--- a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml
+++ b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml
@@ -10,8 +10,8 @@  maintainers:
   - Philippe CORNU <philippe.cornu@st.com>
 
 description: |
-             The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
-             panel connected using a MIPI-DSI video interface.
+  The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
+  panel connected using a MIPI-DSI video interface.
 
 allOf:
   - $ref: panel-common.yaml#
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
index 7a685d0428b3..44ce98f68705 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
@@ -18,9 +18,9 @@  properties:
   reg: true
   reset-gpios: true
   vdd3-supply:
-     description: core voltage supply
+    description: core voltage supply
   vci-supply:
-     description: voltage supply for analog circuits
+    description: voltage supply for analog circuits
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
index b36f39f6b233..076b057b4af5 100644
--- a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
+++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
@@ -7,7 +7,7 @@  $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Visionox model RM69299 Panels Device Tree Bindings.
 
 maintainers:
- - Harigovindan P <harigovi@codeaurora.org>
+  - Harigovindan P <harigovi@codeaurora.org>
 
 description: |
   This binding is for display panels using a Visionox RM692999 panel.
diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
index 3be76d15bf6c..69cc7e8bf15a 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
@@ -45,7 +45,7 @@  properties:
 
   phy-dsi-supply:
     description:
-        Phandle of the regulator that provides the supply voltage.
+      Phandle of the regulator that provides the supply voltage.
 
   ports:
     type: object
@@ -147,4 +147,3 @@  examples:
 
 ...
 
-
diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
index bbd76591c180..173730d56334 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
@@ -78,7 +78,7 @@  properties:
       - const: vp4
 
   interrupts:
-     items:
+    items:
       - description: common_m DSS Master common
       - description: common_s0 DSS Shared common 0
       - description: common_s1 DSS Shared common 1
diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
index 3bbe9521c0bc..4cc011230153 100644
--- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
+++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
@@ -56,8 +56,8 @@  properties:
 
   memory-region:
     description:
-       phandle to a node describing reserved memory (System RAM memory)
-       used by DSP (see bindings/reserved-memory/reserved-memory.txt)
+      phandle to a node describing reserved memory (System RAM memory)
+      used by DSP (see bindings/reserved-memory/reserved-memory.txt)
     maxItems: 1
 
 required:
diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml
index c9534d2164a2..822975dbeafa 100644
--- a/Documentation/devicetree/bindings/example-schema.yaml
+++ b/Documentation/devicetree/bindings/example-schema.yaml
@@ -177,10 +177,10 @@  properties:
 dependencies:
   # 'vendor,bool-property' is only allowed when 'vendor,string-array-property'
   # is present
-  vendor,bool-property: [ vendor,string-array-property ]
+  vendor,bool-property: [ 'vendor,string-array-property' ]
   # Expressing 2 properties in both orders means all of the set of properties
   # must be present or none of them.
-  vendor,string-array-property: [ vendor,bool-property ]
+  vendor,string-array-property: [ 'vendor,bool-property' ]
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
index 893d81e54caa..b26d4b4be743 100644
--- a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
+++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
@@ -7,7 +7,7 @@  $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: IBM FSI-attached SPI controllers
 
 maintainers:
- - Eddie James <eajames@linux.ibm.com>
+  - Eddie James <eajames@linux.ibm.com>
 
 description: |
   This binding describes an FSI CFAM engine called the FSI2SPI. Therefore this
diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
index 4f2cbd8307a7..c213cb9ddb9f 100644
--- a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
@@ -19,10 +19,8 @@  properties:
 
   reg:
     items:
-      - description: the I/O address containing the GPIO controller
-                     registers.
-      - description: the I/O address containing the Chip Common A interrupt
-                     registers.
+      - description: the I/O address containing the GPIO controller registers.
+      - description: the I/O address containing the Chip Common A interrupt registers.
 
   gpio-controller: true
 
diff --git a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
index 397d9383d15a..3ad229307bd5 100644
--- a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
@@ -13,39 +13,39 @@  properties:
   compatible:
     oneOf:
       - items:
-         - enum:
-             - renesas,gpio-r8a7778      # R-Car M1
-             - renesas,gpio-r8a7779      # R-Car H1
-         - const: renesas,rcar-gen1-gpio # R-Car Gen1
+          - enum:
+              - renesas,gpio-r8a7778      # R-Car M1
+              - renesas,gpio-r8a7779      # R-Car H1
+          - const: renesas,rcar-gen1-gpio # R-Car Gen1
 
       - items:
-         - enum:
-             - renesas,gpio-r8a7742      # RZ/G1H
-             - renesas,gpio-r8a7743      # RZ/G1M
-             - renesas,gpio-r8a7744      # RZ/G1N
-             - renesas,gpio-r8a7745      # RZ/G1E
-             - renesas,gpio-r8a77470     # RZ/G1C
-             - renesas,gpio-r8a7790      # R-Car H2
-             - renesas,gpio-r8a7791      # R-Car M2-W
-             - renesas,gpio-r8a7792      # R-Car V2H
-             - renesas,gpio-r8a7793      # R-Car M2-N
-             - renesas,gpio-r8a7794      # R-Car E2
-         - const: renesas,rcar-gen2-gpio # R-Car Gen2 or RZ/G1
+          - enum:
+              - renesas,gpio-r8a7742      # RZ/G1H
+              - renesas,gpio-r8a7743      # RZ/G1M
+              - renesas,gpio-r8a7744      # RZ/G1N
+              - renesas,gpio-r8a7745      # RZ/G1E
+              - renesas,gpio-r8a77470     # RZ/G1C
+              - renesas,gpio-r8a7790      # R-Car H2
+              - renesas,gpio-r8a7791      # R-Car M2-W
+              - renesas,gpio-r8a7792      # R-Car V2H
+              - renesas,gpio-r8a7793      # R-Car M2-N
+              - renesas,gpio-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-gpio # R-Car Gen2 or RZ/G1
 
       - items:
-         - enum:
-             - renesas,gpio-r8a774a1     # RZ/G2M
-             - renesas,gpio-r8a774b1     # RZ/G2N
-             - renesas,gpio-r8a774c0     # RZ/G2E
-             - renesas,gpio-r8a7795      # R-Car H3
-             - renesas,gpio-r8a7796      # R-Car M3-W
-             - renesas,gpio-r8a77961     # R-Car M3-W+
-             - renesas,gpio-r8a77965     # R-Car M3-N
-             - renesas,gpio-r8a77970     # R-Car V3M
-             - renesas,gpio-r8a77980     # R-Car V3H
-             - renesas,gpio-r8a77990     # R-Car E3
-             - renesas,gpio-r8a77995     # R-Car D3
-         - const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2
+          - enum:
+              - renesas,gpio-r8a774a1     # RZ/G2M
+              - renesas,gpio-r8a774b1     # RZ/G2N
+              - renesas,gpio-r8a774c0     # RZ/G2E
+              - renesas,gpio-r8a7795      # R-Car H3
+              - renesas,gpio-r8a7796      # R-Car M3-W
+              - renesas,gpio-r8a77961     # R-Car M3-W+
+              - renesas,gpio-r8a77965     # R-Car M3-N
+              - renesas,gpio-r8a77970     # R-Car V3M
+              - renesas,gpio-r8a77980     # R-Car V3H
+              - renesas,gpio-r8a77990     # R-Car E3
+              - renesas,gpio-r8a77995     # R-Car D3
+          - const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
index e1ac6ff5a230..4843df1ddbb6 100644
--- a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
+++ b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
@@ -26,7 +26,8 @@  properties:
       - description: AXI/master interface clock
       - description: GPU core clock
       - description: Shader clock (only required if GPU has feature PIPE_3D)
-      - description: AHB/slave interface clock (only required if GPU can gate slave interface independently)
+      - description: AHB/slave interface clock (only required if GPU can gate 
+          slave interface independently)
     minItems: 1
     maxItems: 4
 
diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
index af35b77053df..7898b9dba5a5 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
@@ -19,7 +19,7 @@  description: |+
 properties:
   compatible:
     enum:
-        - adi,axi-fan-control-1.00.a
+      - adi,axi-fan-control-1.00.a
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
index 869f2ae3d5b3..810536953177 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
@@ -20,22 +20,22 @@  properties:
           - const: fsl,imx1-i2c
       - items:
           - enum:
-            - fsl,imx25-i2c
-            - fsl,imx27-i2c
-            - fsl,imx31-i2c
-            - fsl,imx50-i2c
-            - fsl,imx51-i2c
-            - fsl,imx53-i2c
-            - fsl,imx6q-i2c
-            - fsl,imx6sl-i2c
-            - fsl,imx6sx-i2c
-            - fsl,imx6sll-i2c
-            - fsl,imx6ul-i2c
-            - fsl,imx7s-i2c
-            - fsl,imx8mq-i2c
-            - fsl,imx8mm-i2c
-            - fsl,imx8mn-i2c
-            - fsl,imx8mp-i2c
+              - fsl,imx25-i2c
+              - fsl,imx27-i2c
+              - fsl,imx31-i2c
+              - fsl,imx50-i2c
+              - fsl,imx51-i2c
+              - fsl,imx53-i2c
+              - fsl,imx6q-i2c
+              - fsl,imx6sl-i2c
+              - fsl,imx6sx-i2c
+              - fsl,imx6sll-i2c
+              - fsl,imx6ul-i2c
+              - fsl,imx7s-i2c
+              - fsl,imx8mq-i2c
+              - fsl,imx8mm-i2c
+              - fsl,imx8mn-i2c
+              - fsl,imx8mp-i2c
           - const: fsl,imx21-i2c
 
   reg:
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml
index da6e8bdc4037..015885dd02d3 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml
@@ -16,8 +16,8 @@  allOf:
         required:
           - mrvl,i2c-polling
     then:
-        required:
-          - interrupts
+      required:
+        - interrupts
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index 5117ad68a584..cbb8819d7069 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -53,10 +53,10 @@  properties:
 
   standby-gpios:
     description:
-       Must be the device tree identifier of the STBY pin. This pin is used
-       to place the AD7606 into one of two power-down modes, Standby mode or
-       Shutdown mode. As the line is active low, it should be marked
-       GPIO_ACTIVE_LOW.
+      Must be the device tree identifier of the STBY pin. This pin is used
+      to place the AD7606 into one of two power-down modes, Standby mode or
+      Shutdown mode. As the line is active low, it should be marked
+      GPIO_ACTIVE_LOW.
     maxItems: 1
 
   adi,first-data-gpios:
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml
index a0ebb4680140..cccd3033a55b 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml
@@ -10,7 +10,7 @@  maintainers:
   - Jonathan Cameron <jic23@kernel.org>
 
 description: |
-   Family of simple ADCs with i2c inteface and internal references.
+  Family of simple ADCs with i2c inteface and internal references.
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
index e6263b617941..a6ac289d98da 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -24,11 +24,11 @@  properties:
           - const: qcom,spmi-adc-rev2
 
       - items:
-        - enum:
-          - qcom,spmi-vadc
-          - qcom,spmi-adc5
-          - qcom,spmi-adc-rev2
-          - qcom,spmi-adc7
+          - enum:
+              - qcom,spmi-vadc
+              - qcom,spmi-adc5
+              - qcom,spmi-adc-rev2
+              - qcom,spmi-adc7
 
   reg:
     description: VADC base address in the SPMI PMIC register map
@@ -101,12 +101,11 @@  patternProperties:
           - $ref: /schemas/types.yaml#/definitions/uint32-array
         oneOf:
           - items:
-            - const: 1
-            - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
-
+              - const: 1
+              - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
           - items:
-            - const: 10
-            - const: 81
+              - const: 10
+              - const: 81
 
       qcom,ratiometric:
         description: |
diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
index bcff82a423bc..1bb76197787b 100644
--- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
@@ -17,10 +17,10 @@  properties:
       - const: rockchip,rk3399-saradc
       - items:
           - enum:
-            - rockchip,px30-saradc
-            - rockchip,rk3308-saradc
-            - rockchip,rk3328-saradc
-            - rockchip,rv1108-saradc
+              - rockchip,px30-saradc
+              - rockchip,rk3308-saradc
+              - rockchip,rk3328-saradc
+              - rockchip,rv1108-saradc
           - const: rockchip,rk3399-saradc
 
   reg:
diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
index 1c6d49685e9f..5342360e96b1 100644
--- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
@@ -7,8 +7,8 @@  $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: HMC425A 6-bit Digital Step Attenuator
 
 maintainers:
-- Michael Hennerich <michael.hennerich@analog.com>
-- Beniamin Bia <beniamin.bia@analog.com>
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Beniamin Bia <beniamin.bia@analog.com>
 
 description: |
   Digital Step Attenuator IIO device with gpio interface.
diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml b/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml
index 69e8931e0ae8..9a89b34bdd8f 100644
--- a/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml
+++ b/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml
@@ -31,10 +31,10 @@  properties:
       - atlas,co2-ezo
 
   reg:
-     maxItems: 1
+    maxItems: 1
 
   interrupts:
-     maxItems: 1
+    maxItems: 1
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
index 58d81ca43460..82424e06be27 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
@@ -61,17 +61,17 @@  properties:
         const: 0
 
       adi,range-microamp:
-          description: Output range of the channel.
-          oneOf:
-            - items:
-                - const: 0
-                - const: 300000
-            - items:
-                - const: -60000
-                - const: 0
-            - items:
-                - const: -60000
-                - const: 300000
+        description: Output range of the channel.
+        oneOf:
+          - items:
+              - const: 0
+              - const: 300000
+          - items:
+              - const: -60000
+              - const: 0
+          - items:
+              - const: -60000
+              - const: 300000
 
   channel@1:
     description: Represents an external channel which are
@@ -84,10 +84,10 @@  properties:
         const: 1
 
       adi,range-microamp:
-          description: Output range of the channel.
-          items:
-            - const: 0
-            - enum: [ 140000, 250000 ]
+        description: Output range of the channel.
+        items:
+          - const: 0
+          - enum: [140000, 250000]
 
   channel@2:
     description: Represents an external channel which are
@@ -100,10 +100,10 @@  properties:
         const: 2
 
       adi,range-microamp:
-          description: Output range of the channel.
-          items:
-            - const: 0
-            - enum: [ 55000, 150000 ]
+        description: Output range of the channel.
+        items:
+          - const: 0
+          - enum: [55000, 150000]
 
 patternProperties:
   "^channel@([3-5])$":
@@ -116,19 +116,19 @@  patternProperties:
         maximum: 5
 
       adi,range-microamp:
-          description: Output range of the channel.
-          items:
-            - const: 0
-            - enum: [ 45000, 100000 ]
+        description: Output range of the channel.
+        items:
+          - const: 0
+          - enum: [45000, 100000]
 
 required:
-- reg
-- channel@0
-- channel@1
-- channel@2
-- channel@3
-- channel@4
-- channel@5
+  - reg
+  - channel@0
+  - channel@1
+  - channel@2
+  - channel@3
+  - channel@4
+  - channel@5
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
index da8f2e872535..58887a4f9c15 100644
--- a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
+++ b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
@@ -36,15 +36,15 @@  required:
 additionalProperties: false
 
 examples:
-- |
-  i2c {
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      light-sensor@51 {
-              compatible = "vishay,vcnl4200";
-              reg = <0x51>;
-              proximity-near-level = <220>;
-      };
-  };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@51 {
+            compatible = "vishay,vcnl4200";
+            reg = <0x51>;
+            proximity-near-level = <220>;
+        };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
index f4393bfbf355..f0b336ac39c9 100644
--- a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
+++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
@@ -13,15 +13,15 @@  properties:
   compatible:
     oneOf:
       - enum:
-        - asahi-kasei,ak8975
-        - asahi-kasei,ak8963
-        - asahi-kasei,ak09911
-        - asahi-kasei,ak09912
+          - asahi-kasei,ak8975
+          - asahi-kasei,ak8963
+          - asahi-kasei,ak09911
+          - asahi-kasei,ak09912
       - enum:
-        - ak8975
-        - ak8963
-        - ak09911
-        - ak09912
+          - ak8975
+          - ak8963
+          - ak09911
+          - ak09912
         deprecated: true
 
   reg:
diff --git a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
index 4190253336ec..51dba64037f6 100644
--- a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
@@ -39,8 +39,8 @@  properties:
     description:
       The driver current for the LED used in proximity sensing.
     enum: [0, 10000, 20000, 30000, 40000, 50000, 60000, 70000, 80000, 90000,
-          100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000,
-          180000, 190000, 200000]
+           100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000,
+           180000, 190000, 200000]
     default: 20000
 
 required:
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
index 40ccbe7b5c13..0f79d9a01c49 100644
--- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
@@ -307,7 +307,7 @@  patternProperties:
           mode.
         $ref: /schemas/types.yaml#/definitions/uint32
         enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000,
-          500000, 1000000]
+               500000, 1000000]
 
       adi,custom-thermistor:
         description:
diff --git a/Documentation/devicetree/bindings/input/imx-keypad.yaml b/Documentation/devicetree/bindings/input/imx-keypad.yaml
index 7432c6e8cf3a..f21db81206b4 100644
--- a/Documentation/devicetree/bindings/input/imx-keypad.yaml
+++ b/Documentation/devicetree/bindings/input/imx-keypad.yaml
@@ -24,19 +24,19 @@  properties:
       - const: fsl,imx21-kpp
       - items:
           - enum:
-            - fsl,imx25-kpp
-            - fsl,imx27-kpp
-            - fsl,imx31-kpp
-            - fsl,imx35-kpp
-            - fsl,imx51-kpp
-            - fsl,imx53-kpp
-            - fsl,imx50-kpp
-            - fsl,imx6q-kpp
-            - fsl,imx6sx-kpp
-            - fsl,imx6sl-kpp
-            - fsl,imx6sll-kpp
-            - fsl,imx6ul-kpp
-            - fsl,imx7d-kpp
+              - fsl,imx25-kpp
+              - fsl,imx27-kpp
+              - fsl,imx31-kpp
+              - fsl,imx35-kpp
+              - fsl,imx51-kpp
+              - fsl,imx53-kpp
+              - fsl,imx50-kpp
+              - fsl,imx6q-kpp
+              - fsl,imx6sx-kpp
+              - fsl,imx6sl-kpp
+              - fsl,imx6sll-kpp
+              - fsl,imx6ul-kpp
+              - fsl,imx7d-kpp
           - const: fsl,imx21-kpp
 
   reg:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml
index 8c73e5264312..3225c8d1fdaf 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml
@@ -51,7 +51,7 @@  required:
   - touchscreen-max-pressure
 
 examples:
-- |
+  - |
     #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
       #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
index 024b262a2ef7..4ce109476a0e 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
@@ -20,11 +20,11 @@  maintainers:
 allOf:
   - $ref: touchscreen.yaml#
   - if:
-     properties:
-       compatible:
-         contains:
-           enum:
-             - evervision,ev-ft5726
+      properties:
+        compatible:
+          contains:
+            enum:
+              - evervision,ev-ft5726
 
     then:
       properties:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
index e81cfa56f25a..da5b0d87e16d 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
@@ -35,9 +35,8 @@  properties:
     maxItems: 1
 
   irq-gpios:
-    description: GPIO pin used for IRQ.
-                 The driver uses the interrupt gpio pin as
-                 output to reset the device.
+    description: GPIO pin used for IRQ. The driver uses the interrupt gpio pin
+      as output to reset the device.
     maxItems: 1
 
   reset-gpios:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
index d7dac16a3960..36dc7b56a453 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
@@ -33,8 +33,8 @@  properties:
     $ref: /schemas/types.yaml#/definitions/uint32
 
   touchscreen-min-pressure:
-    description: minimum pressure on the touchscreen to be achieved in order for the
-                 touchscreen driver to report a touch event.
+    description: minimum pressure on the touchscreen to be achieved in order
+      for the touchscreen driver to report a touch event.
     $ref: /schemas/types.yaml#/definitions/uint32
 
   touchscreen-fuzz-x:
@@ -46,13 +46,13 @@  properties:
     $ref: /schemas/types.yaml#/definitions/uint32
 
   touchscreen-fuzz-pressure:
-    description: pressure noise value of the absolute input device (arbitrary range
-                 dependent on the controller)
+    description: pressure noise value of the absolute input device (arbitrary
+      range dependent on the controller)
     $ref: /schemas/types.yaml#/definitions/uint32
 
   touchscreen-average-samples:
-    description: Number of data samples which are averaged for each read (valid values
-                 dependent on the controller)
+    description: Number of data samples which are averaged for each read (valid
+      values dependent on the controller)
     $ref: /schemas/types.yaml#/definitions/uint32
 
   touchscreen-inverted-x:
diff --git a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
index ff09550ad959..a8873739d61a 100644
--- a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
+++ b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
@@ -25,17 +25,17 @@  properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - fsl,imx8mn-nic
-          - fsl,imx8mm-nic
-          - fsl,imx8mq-nic
-        - const: fsl,imx8m-nic
+          - enum:
+              - fsl,imx8mn-nic
+              - fsl,imx8mm-nic
+              - fsl,imx8mq-nic
+          - const: fsl,imx8m-nic
       - items:
-        - enum:
-          - fsl,imx8mn-noc
-          - fsl,imx8mm-noc
-          - fsl,imx8mq-noc
-        - const: fsl,imx8m-noc
+          - enum:
+              - fsl,imx8mn-noc
+              - fsl,imx8mm-noc
+              - fsl,imx8mq-noc
+          - const: fsl,imx8m-noc
       - const: fsl,imx8m-nic
 
   reg:
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
index d01bac80d416..8659048f92a7 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
@@ -4,7 +4,7 @@ 
 $id: http://devicetree.org/schemas/interconnect/qcom,sc7180.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title:  Qualcomm SC7180 Network-On-Chip Interconnect
+title: Qualcomm SC7180 Network-On-Chip Interconnect
 
 maintainers:
   - Odelu Kukatla <okukatla@codeaurora.org>
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml
index 74536747b51d..dab17c0716ce 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml
@@ -4,7 +4,7 @@ 
 $id: http://devicetree.org/schemas/interconnect/qcom,sdm845.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title:  Qualcomm SDM845 Network-On-Chip Interconnect
+title: Qualcomm SDM845 Network-On-Chip Interconnect
 
 maintainers:
   - Georgi Djakov <georgi.djakov@linaro.org>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
index 96f8803ff4e6..06889963dfb7 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
@@ -42,8 +42,8 @@  properties:
       - items:
           - const: arm,gic-400
           - enum:
-             - arm,cortex-a15-gic
-             - arm,cortex-a7-gic
+              - arm,cortex-a15-gic
+              - arm,cortex-a7-gic
 
       - items:
           - const: arm,arm1176jzf-devchip-gic
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml
index 28b27e1a6e9d..02a3cf470518 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml
@@ -16,20 +16,20 @@  properties:
   compatible:
     oneOf:
       - enum:
-        - ingenic,jz4740-intc
-        - ingenic,jz4760-intc
-        - ingenic,jz4780-intc
+          - ingenic,jz4740-intc
+          - ingenic,jz4760-intc
+          - ingenic,jz4780-intc
       - items:
-        - enum:
-          - ingenic,jz4775-intc
-          - ingenic,jz4770-intc
-        - const: ingenic,jz4760-intc
+          - enum:
+              - ingenic,jz4775-intc
+              - ingenic,jz4770-intc
+          - const: ingenic,jz4760-intc
       - items:
-        - const: ingenic,x1000-intc
-        - const: ingenic,jz4780-intc
+          - const: ingenic,x1000-intc
+          - const: ingenic,jz4780-intc
       - items:
-        - const: ingenic,jz4725b-intc
-        - const: ingenic,jz4740-intc
+          - const: ingenic,jz4725b-intc
+          - const: ingenic,jz4740-intc
 
   "#interrupt-cells":
     const: 1
diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
index 32e0896c6bc1..47938e372987 100644
--- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
@@ -79,7 +79,8 @@  properties:
     description: |
       kHz; switching frequency.
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ]
+    enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 
+            2400, 3200, 4800, 9600 ]
 
   qcom,ovp:
     description: |
diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
index 3b35eb5ac3f9..8a3470b64d06 100644
--- a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
+++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
@@ -29,12 +29,12 @@  properties:
       - const: fsl,imx8-mu-scu
       - items:
           - enum:
-            - fsl,imx7s-mu
-            - fsl,imx8mq-mu
-            - fsl,imx8mm-mu
-            - fsl,imx8mn-mu
-            - fsl,imx8mp-mu
-            - fsl,imx8qxp-mu
+              - fsl,imx7s-mu
+              - fsl,imx8mq-mu
+              - fsl,imx8mm-mu
+              - fsl,imx8mn-mu
+              - fsl,imx8mp-mu
+              - fsl,imx8qxp-mu
           - const: fsl,imx6sx-mu
       - description: To communicate with i.MX8 SCU with fast IPC
         items:
diff --git a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
index 4ac2123d9193..168beeb7e9f7 100644
--- a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
+++ b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
@@ -24,7 +24,7 @@  properties:
   compatible:
     items:
       - enum:
-        - qcom,sm8250-ipcc
+          - qcom,sm8250-ipcc
       - const: qcom,ipcc
 
   reg:
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
index 75196d11da58..a258832d520c 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
@@ -20,8 +20,8 @@  properties:
     oneOf:
       - const: allwinner,sun8i-a83t-de2-rotate
       - items:
-        - const: allwinner,sun50i-a64-de2-rotate
-        - const: allwinner,sun8i-a83t-de2-rotate
+          - const: allwinner,sun50i-a64-de2-rotate
+          - const: allwinner,sun8i-a83t-de2-rotate
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
index 8707df613f6c..6a56214c6cfd 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
@@ -20,8 +20,8 @@  properties:
     oneOf:
       - const: allwinner,sun8i-h3-deinterlace
       - items:
-        - const: allwinner,sun50i-a64-deinterlace
-        - const: allwinner,sun8i-h3-deinterlace
+          - const: allwinner,sun50i-a64-deinterlace
+          - const: allwinner,sun8i-h3-deinterlace
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
index e0084b272b25..d8c54f9d9506 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
@@ -17,17 +17,17 @@  properties:
   compatible:
     items:
       - enum:
-        - adi,adv7180
-        - adi,adv7180cp
-        - adi,adv7180st
-        - adi,adv7182
-        - adi,adv7280
-        - adi,adv7280-m
-        - adi,adv7281
-        - adi,adv7281-m
-        - adi,adv7281-ma
-        - adi,adv7282
-        - adi,adv7282-m
+          - adi,adv7180
+          - adi,adv7180cp
+          - adi,adv7180st
+          - adi,adv7182
+          - adi,adv7280
+          - adi,adv7280-m
+          - adi,adv7281
+          - adi,adv7281-m
+          - adi,adv7281-ma
+          - adi,adv7282
+          - adi,adv7282-m
 
   reg:
     maxItems: 1
@@ -58,17 +58,16 @@  allOf:
   - if:
       properties:
         compatible:
-          items:
-            - enum:
-              - adi,adv7180
-              - adi,adv7182
-              - adi,adv7280
-              - adi,adv7280-m
-              - adi,adv7281
-              - adi,adv7281-m
-              - adi,adv7281-ma
-              - adi,adv7282
-              - adi,adv7282-m
+          enum:
+            - adi,adv7180
+            - adi,adv7182
+            - adi,adv7280
+            - adi,adv7280-m
+            - adi,adv7281
+            - adi,adv7281-m
+            - adi,adv7281-ma
+            - adi,adv7282
+            - adi,adv7282-m
     then:
       required:
         - port
diff --git a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
index 5ad4b8c356cf..107c862a7fc7 100644
--- a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
@@ -5,7 +5,7 @@ 
 $id: http://devicetree.org/schemas/media/i2c/imi,rdacm2x-gmsl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title:  IMI D&D RDACM20 and RDACM21 Automotive Camera Platforms
+title: IMI D&D RDACM20 and RDACM21 Automotive Camera Platforms
 
 maintainers:
   - Jacopo Mondi <jacopo+renesas@jmondi.org>
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
index e7b543159d15..9ea827092fdd 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
@@ -49,7 +49,7 @@  properties:
   gpio-controller: true
 
   '#gpio-cells':
-      const: 2
+    const: 2
 
   ports:
     type: object
diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
index 1956b2a32bf4..cde85553fd01 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
@@ -138,4 +138,5 @@  examples:
             };
         };
     };
-...
\ No newline at end of file
+...
+
diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
index c9e068231d4b..6d282585d0b9 100644
--- a/Documentation/devicetree/bindings/media/renesas,csi2.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
@@ -19,15 +19,15 @@  properties:
   compatible:
     items:
       - enum:
-        - renesas,r8a774a1-csi2 # RZ/G2M
-        - renesas,r8a774b1-csi2 # RZ/G2N
-        - renesas,r8a774c0-csi2 # RZ/G2E
-        - renesas,r8a7795-csi2  # R-Car H3
-        - renesas,r8a7796-csi2  # R-Car M3-W
-        - renesas,r8a77965-csi2 # R-Car M3-N
-        - renesas,r8a77970-csi2 # R-Car V3M
-        - renesas,r8a77980-csi2 # R-Car V3H
-        - renesas,r8a77990-csi2 # R-Car E3
+          - renesas,r8a774a1-csi2 # RZ/G2M
+          - renesas,r8a774b1-csi2 # RZ/G2N
+          - renesas,r8a774c0-csi2 # RZ/G2E
+          - renesas,r8a7795-csi2  # R-Car H3
+          - renesas,r8a7796-csi2  # R-Car M3-W
+          - renesas,r8a77965-csi2 # R-Car M3-N
+          - renesas,r8a77970-csi2 # R-Car V3M
+          - renesas,r8a77980-csi2 # R-Car V3H
+          - renesas,r8a77990-csi2 # R-Car E3
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
index 2b629456d75f..c81dbc3e8960 100644
--- a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
@@ -31,8 +31,8 @@  properties:
     oneOf:
       - const: vdpu
       - items:
-        - const: vepu
-        - const: vdpu
+          - const: vepu
+          - const: vdpu
 
   clocks:
     maxItems: 2
diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
index 7b9407c0520e..2961a5b6872f 100644
--- a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
+++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
@@ -25,7 +25,7 @@  properties:
   compatible:
     items:
       - enum:
-        - xlnx,mipi-csi2-rx-subsystem-5.0
+          - xlnx,mipi-csi2-rx-subsystem-5.0
 
   reg:
     maxItems: 1
@@ -65,13 +65,12 @@  properties:
       0x2d - RAW14
       0x2e - RAW16
       0x2f - RAW20
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - anyOf:
-        - minimum: 0x1e
-        - maximum: 0x24
-        - minimum: 0x28
-        - maximum: 0x2f
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - minimum: 0x1e
+        maximum: 0x24
+      - minimum: 0x28
+        maximum: 0x2f
 
   xlnx,vfb:
     type: boolean
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml
index dee5131c0361..68484136a510 100644
--- a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml
@@ -15,12 +15,12 @@  properties:
       - const: fsl,imx6q-mmdc
       - items:
           - enum:
-            - fsl,imx6qp-mmdc
-            - fsl,imx6sl-mmdc
-            - fsl,imx6sll-mmdc
-            - fsl,imx6sx-mmdc
-            - fsl,imx6ul-mmdc
-            - fsl,imx7ulp-mmdc
+              - fsl,imx6qp-mmdc
+              - fsl,imx6sl-mmdc
+              - fsl,imx6sll-mmdc
+              - fsl,imx6sx-mmdc
+              - fsl,imx6ul-mmdc
+              - fsl,imx7ulp-mmdc
           - const: fsl,imx6q-mmdc
 
   reg:
diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
index 17ba45a6c260..fe0ce191a851 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
@@ -16,11 +16,11 @@  properties:
   compatible:
     oneOf:
       - enum:
-        - ingenic,jz4740-nemc
-        - ingenic,jz4780-nemc
+          - ingenic,jz4740-nemc
+          - ingenic,jz4780-nemc
       - items:
-        - const: ingenic,jz4725b-nemc
-        - const: ingenic,jz4740-nemc
+          - const: ingenic,jz4725b-nemc
+          - const: ingenic,jz4740-nemc
 
   "#address-cells":
     const: 2
diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
index 660005601a7f..7bfe120e14c3 100644
--- a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
@@ -26,10 +26,10 @@  properties:
   compatible:
     items:
       - enum:
-        - renesas,r8a77970-rpc-if       # R-Car V3M
-        - renesas,r8a77980-rpc-if       # R-Car V3H
-        - renesas,r8a77995-rpc-if       # R-Car D3
-      - const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 device
+          - renesas,r8a77970-rpc-if       # R-Car V3M
+          - renesas,r8a77980-rpc-if       # R-Car V3H
+          - renesas,r8a77995-rpc-if       # R-Car D3
+      - const: renesas,rcar-gen3-rpc-if   # a generic R-Car gen3 device
 
   reg:
     items:
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
index a5531f6caf12..499c62c04daa 100644
--- a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
+++ b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
@@ -98,11 +98,11 @@  allOf:
           description:
             Databus power supply.
   - if:
-     properties:
-       compatible:
-         contains:
-           enum:
-             - cirrus,cs47l15
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cirrus,cs47l15
     then:
       required:
         - MICVDD-supply
@@ -174,24 +174,24 @@  properties:
         "mclk3" For the clock supplied on MCLK3.
     oneOf:
       - items:
-        - const: mclk1
+          - const: mclk1
       - items:
-        - const: mclk2
+          - const: mclk2
       - items:
-        - const: mclk3
+          - const: mclk3
       - items:
-        - const: mclk1
-        - const: mclk2
+          - const: mclk1
+          - const: mclk2
       - items:
-        - const: mclk1
-        - const: mclk3
+          - const: mclk1
+          - const: mclk3
       - items:
-        - const: mclk2
-        - const: mclk3
+          - const: mclk2
+          - const: mclk3
       - items:
-        - const: mclk1
-        - const: mclk2
-        - const: mclk3
+          - const: mclk1
+          - const: mclk2
+          - const: mclk3
 
   AVDD-supply:
     description:
diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
index 487a8445722e..7fd232699f16 100644
--- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
+++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
@@ -89,8 +89,8 @@  properties:
             description: Values of resistors for divider on raw ADC input
             maxItems: 2
             items:
-             minimum: 1000
-             maximum: 1000000
+              minimum: 1000
+              maximum: 1000000
 
           gw,voltage-offset-microvolt:
             description: |
diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
index dd995d7dc1a6..305123e74a58 100644
--- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
@@ -113,8 +113,8 @@  properties:
             maxItems: 1
 
           st,mask-reset:
-            description: mask reset for this regulator,
-                         the regulator configuration is maintained during pmic reset.
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
             $ref: /schemas/types.yaml#/definitions/flag
 
           regulator-name: true
@@ -135,8 +135,8 @@  properties:
             maxItems: 1
 
           st,mask-reset:
-            description: mask reset for this regulator,
-                         the regulator configuration is maintained during pmic reset.
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
             $ref: /schemas/types.yaml#/definitions/flag
 
           regulator-name: true
@@ -154,8 +154,8 @@  properties:
             maxItems: 1
 
           st,mask-reset:
-            description: mask reset for this regulator,
-                         the regulator configuration is maintained during pmic reset.
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
             $ref: /schemas/types.yaml#/definitions/flag
 
           regulator-name: true
@@ -172,8 +172,8 @@  properties:
             maxItems: 1
 
           st,mask-reset:
-            description: mask reset for this regulator,
-                         the regulator configuration is maintained during pmic reset.
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
             $ref: /schemas/types.yaml#/definitions/flag
 
           regulator-name: true
@@ -198,8 +198,8 @@  properties:
             maxItems: 1
 
           st,mask-reset:
-            description: mask reset for this regulator,
-                         the regulator configuration is maintained during pmic reset.
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
             $ref: /schemas/types.yaml#/definitions/flag
 
           regulator-name: true
@@ -220,8 +220,8 @@  properties:
             maxItems: 1
 
           st,mask-reset:
-            description: mask reset for this regulator,
-                         the regulator configuration is maintained during pmic reset.
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
             $ref: /schemas/types.yaml#/definitions/flag
 
           regulator-name: true
diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
index 03d0a232c75e..c8fd5d3e3071 100644
--- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
@@ -24,12 +24,11 @@  maintainers:
 
 properties:
   compatible:
-    anyOf:
-      - items:
-        - enum:
-           - ti,j721e-system-controller
-        - const: syscon
-        - const: simple-mfd
+    items:
+      - enum:
+          - ti,j721e-system-controller
+      - const: syscon
+      - const: simple-mfd
 
   "#address-cells":
     const: 1
diff --git a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
index 4c0106cea36d..9e762d474218 100644
--- a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
+++ b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
@@ -73,13 +73,13 @@  allOf:
       required:
         - DBVDD3-supply
   - if:
-     properties:
-       compatible:
-         contains:
-           enum:
-             - cirrus,cs47l24
-             - wlf,wm1831
-             - wlf,wm8997
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cirrus,cs47l24
+              - wlf,wm1831
+              - wlf,wm8997
     then:
       properties:
         SPKVDD-supply:
@@ -183,12 +183,12 @@  properties:
       clock supplied on MCLK2, recommended to be an always on 32k clock.
     oneOf:
       - items:
-        - const: mclk1
+          - const: mclk1
       - items:
-        - const: mclk2
+          - const: mclk2
       - items:
-        - const: mclk1
-        - const: mclk2
+          - const: mclk1
+          - const: mclk2
 
   reset-gpios:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
index 7a386a5b8fcb..0cd74c3116f8 100644
--- a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
+++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
@@ -21,9 +21,9 @@  properties:
   compatible:
     items:
       - enum:
-        - amlogic,meson8-sdhc
-        - amlogic,meson8b-sdhc
-        - amlogic,meson8m2-sdhc
+          - amlogic,meson8-sdhc
+          - amlogic,meson8b-sdhc
+          - amlogic,meson8m2-sdhc
       - const: amlogic,meson-mx-sdhc
 
   reg:
diff --git a/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
index e60bfe980ab3..9b63df1c22fb 100644
--- a/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
@@ -16,14 +16,14 @@  properties:
   compatible:
     oneOf:
       - enum:
-        - ingenic,jz4740-mmc
-        - ingenic,jz4725b-mmc
-        - ingenic,jz4760-mmc
-        - ingenic,jz4780-mmc
-        - ingenic,x1000-mmc
+          - ingenic,jz4740-mmc
+          - ingenic,jz4725b-mmc
+          - ingenic,jz4760-mmc
+          - ingenic,jz4780-mmc
+          - ingenic,x1000-mmc
       - items:
-        - const: ingenic,jz4770-mmc
-        - const: ingenic,jz4760-mmc
+          - const: ingenic,jz4770-mmc
+          - const: ingenic,jz4760-mmc
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
index e5dbc20456e5..b4c3fd40caeb 100644
--- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
+++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
@@ -130,9 +130,9 @@  then:
   required:
     - clock-names
   description:
-     The internal card detection logic that exists in these controllers is
-     sectioned off to be run by a separate second clock source to allow
-     the main core clock to be turned off to save power.
+    The internal card detection logic that exists in these controllers is
+    sectioned off to be run by a separate second clock source to allow
+    the main core clock to be turned off to save power.
 
 unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml
index cb9794edff24..b32876933269 100644
--- a/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml
@@ -14,12 +14,10 @@  maintainers:
 
 properties:
   compatible:
-    oneOf:
-      - items:
-        - enum:
+    items:
+      - enum:
           - xlnx,zynqmp-nand-controller
-        - enum:
-          - arasan,nfc-v3p10
+      - const: arasan,nfc-v3p10
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
index 354cb63feea3..3201372b7f85 100644
--- a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
@@ -4,7 +4,7 @@ 
 $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title:  Freescale General-Purpose Media Interface (GPMI) binding
+title: Freescale General-Purpose Media Interface (GPMI) binding
 
 maintainers:
   - Han Xu <han.xu@nxp.com>
diff --git a/Documentation/devicetree/bindings/mtd/mxc-nand.yaml b/Documentation/devicetree/bindings/mtd/mxc-nand.yaml
index ee4d1d026fd8..73b86f2226c7 100644
--- a/Documentation/devicetree/bindings/mtd/mxc-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/mxc-nand.yaml
@@ -4,7 +4,7 @@ 
 $id: http://devicetree.org/schemas/mtd/mxc-nand.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title:  Freescale's mxc_nand binding
+title: Freescale's mxc_nand binding
 
 maintainers:
   - Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
diff --git a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
index 6ae7de15d172..28a08ff407db 100644
--- a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
@@ -42,7 +42,7 @@  patternProperties:
         const: 512
 
       nand-ecc-strength:
-        enum: [1, 4 ,8 ]
+        enum: [1, 4, 8]
 
 allOf:
   - $ref: "nand-controller.yaml#"
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
index faea214339ca..6a1ec50ad4fd 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
@@ -85,8 +85,8 @@  patternProperties:
 
 oneOf:
   - required:
-    - ports
+      - ports
   - required:
-    - ethernet-ports
+      - ethernet-ports
 
 ...
diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index a3561276e609..8594f114f016 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -43,7 +43,7 @@  description:
 
 properties:
   compatible:
-      const: "qcom,sdm845-ipa"
+    const: "qcom,sdm845-ipa"
 
   reg:
     items:
@@ -64,7 +64,7 @@  properties:
     maxItems: 1
 
   clock-names:
-      const: core
+    const: core
 
   interrupts:
     items:
@@ -96,8 +96,8 @@  properties:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description: State bits used in by the AP to signal the modem.
     items:
-    - description: Whether the "ipa-clock-enabled" state bit is valid
-    - description: Whether the IPA clock is enabled (if valid)
+      - description: Whether the "ipa-clock-enabled" state bit is valid
+      - description: Whether the IPA clock is enabled (if valid)
 
   qcom,smem-state-names:
     $ref: /schemas/types.yaml#/definitions/string-array
@@ -140,9 +140,9 @@  required:
 
 oneOf:
   - required:
-    - modem-init
+      - modem-init
   - required:
-    - memory-region
+      - memory-region
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
index 7d84a863b9b9..cbacc04fc9e6 100644
--- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
+++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
@@ -46,10 +46,10 @@  properties:
   clock-names:
     oneOf:
       - items:          # for Pro4
-        - const: gio
-        - const: ether
-        - const: ether-gb
-        - const: ether-phy
+          - const: gio
+          - const: ether
+          - const: ether-gb
+          - const: ether-phy
       - const: ether    # for others
 
   resets:
@@ -59,8 +59,8 @@  properties:
   reset-names:
     oneOf:
       - items:          # for Pro4
-        - const: gio
-        - const: ether
+          - const: gio
+          - const: ether
       - const: ether    # for others
 
   socionext,syscon-phy-mode:
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index fafa34cebdb1..e5dff66df481 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -48,11 +48,11 @@  properties:
     minItems: 3
     maxItems: 5
     items:
-        - description: GMAC main clock
-        - description: MAC TX clock
-        - description: MAC RX clock
-        - description: For MPU family, used for power mode
-        - description: For MPU family, used for PHY without quartz
+      - description: GMAC main clock
+      - description: MAC TX clock
+      - description: MAC RX clock
+      - description: For MPU family, used for power mode
+      - description: For MPU family, used for PHY without quartz
 
   clock-names:
     minItems: 3
@@ -89,7 +89,7 @@  required:
   - st,syscon
 
 examples:
- - |
+  - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
     #include <dt-bindings/reset/stm32mp1-resets.h>
diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
index 3ea0e1290dbb..dadeb8f811c0 100644
--- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@@ -35,7 +35,7 @@  properties:
   reg:
     maxItems: 1
     description:
-       The physical base address and size of full the CPSW module IO range
+      The physical base address and size of full the CPSW module IO range
 
   '#address-cells':
     const: 1
@@ -85,36 +85,36 @@  properties:
 
     patternProperties:
       "^port@[0-9]+$":
-          type: object
-          description: CPSW external ports
-
-          allOf:
-            - $ref: ethernet-controller.yaml#
-
-          properties:
-            reg:
-              items:
-                - enum: [1, 2]
-              description: CPSW port number
-
-            phys:
-              maxItems: 1
-              description:  phandle on phy-gmii-sel PHY
-
-            label:
-              description: label associated with this port
-
-            ti,dual-emac-pvid:
-              $ref: /schemas/types.yaml#/definitions/uint32
-              minimum: 1
-              maximum: 1024
-              description:
-                Specifies default PORT VID to be used to segregate
-                ports. Default value - CPSW port number.
-
-          required:
-            - reg
-            - phys
+        type: object
+        description: CPSW external ports
+
+        allOf:
+          - $ref: ethernet-controller.yaml#
+
+        properties:
+          reg:
+            items:
+              - enum: [1, 2]
+            description: CPSW port number
+
+          phys:
+            maxItems: 1
+            description: phandle on phy-gmii-sel PHY
+
+          label:
+            description: label associated with this port
+
+          ti,dual-emac-pvid:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 1
+            maximum: 1024
+            description:
+              Specifies default PORT VID to be used to segregate
+              ports. Default value - CPSW port number.
+
+        required:
+          - reg
+          - phys
 
   cpts:
     type: object
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
index 174579370a22..227270cbf892 100644
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
@@ -55,7 +55,7 @@  properties:
   reg:
     maxItems: 1
     description:
-       The physical base address and size of full the CPSW2G NUSS IO range
+      The physical base address and size of full the CPSW2G NUSS IO range
 
   reg-names:
     items:
@@ -100,38 +100,38 @@  properties:
 
     patternProperties:
       port@1:
-       type: object
-       description: CPSW2G NUSS external ports
-
-       $ref: ethernet-controller.yaml#
-
-       properties:
-         reg:
-           items:
-             - const: 1
-           description: CPSW port number
-
-         phys:
-           maxItems: 1
-           description:  phandle on phy-gmii-sel PHY
-
-         label:
-           description: label associated with this port
-
-         ti,mac-only:
-           $ref: /schemas/types.yaml#definitions/flag
-           description:
-             Specifies the port works in mac-only mode.
-
-         ti,syscon-efuse:
-           $ref: /schemas/types.yaml#definitions/phandle-array
-           description:
-             Phandle to the system control device node which provides access
-             to efuse IO range with MAC addresses
-
-       required:
-         - reg
-         - phys
+        type: object
+        description: CPSW2G NUSS external ports
+
+        $ref: ethernet-controller.yaml#
+
+        properties:
+          reg:
+            items:
+              - const: 1
+            description: CPSW port number
+
+          phys:
+            maxItems: 1
+            description: phandle on phy-gmii-sel PHY
+
+          label:
+            description: label associated with this port
+
+          ti,mac-only:
+            $ref: /schemas/types.yaml#definitions/flag
+            description:
+              Specifies the port works in mac-only mode.
+
+          ti,syscon-efuse:
+            $ref: /schemas/types.yaml#definitions/phandle-array
+            description:
+              Phandle to the system control device node which provides access
+              to efuse IO range with MAC addresses
+
+        required:
+          - reg
+          - phys
 
     additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
index fe9c7df78ea1..1c9d7f05f173 100644
--- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
+++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
@@ -21,18 +21,18 @@  properties:
   compatible:
     items:
       - enum:
-        - fsl,imx6q-ocotp
-        - fsl,imx6sl-ocotp
-        - fsl,imx6sx-ocotp
-        - fsl,imx6ul-ocotp
-        - fsl,imx6ull-ocotp
-        - fsl,imx7d-ocotp
-        - fsl,imx6sll-ocotp
-        - fsl,imx7ulp-ocotp
-        - fsl,imx8mq-ocotp
-        - fsl,imx8mm-ocotp
-        - fsl,imx8mn-ocotp
-        - fsl,imx8mp-ocotp
+          - fsl,imx6q-ocotp
+          - fsl,imx6sl-ocotp
+          - fsl,imx6sx-ocotp
+          - fsl,imx6ul-ocotp
+          - fsl,imx6ull-ocotp
+          - fsl,imx7d-ocotp
+          - fsl,imx6sll-ocotp
+          - fsl,imx7ulp-ocotp
+          - fsl,imx8mq-ocotp
+          - fsl,imx8mm-ocotp
+          - fsl,imx8mn-ocotp
+          - fsl,imx8mp-ocotp
       - const: syscon
 
   reg:
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
index d10a0cf91ba7..59aca6d22ff9 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
@@ -46,8 +46,8 @@  properties:
     const: 1
 
 required:
-   - compatible
-   - reg
+  - compatible
+  - reg
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
index 9e32cb43fb21..0d2557bb0bcc 100644
--- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
@@ -37,9 +37,9 @@  properties:
     const: 0
 
   phy-supply:
-     description:
-       Phandle to a regulator that provides power to the PHY. This
-       regulator will be managed during the PHY power on/off sequence.
+    description:
+      Phandle to a regulator that provides power to the PHY. This
+      regulator will be managed during the PHY power on/off sequence.
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
index cb71561a21b4..fb29ad807b68 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
@@ -100,9 +100,9 @@  properties:
           - const: linestate
           - const: otg-mux
           - items:
-            - const: otg-bvalid
-            - const: otg-id
-            - const: linestate
+              - const: otg-bvalid
+              - const: otg-id
+              - const: linestate
 
       phy-supply:
         description:
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
index e4cd4a1deae9..185cdea9cf81 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -37,7 +37,7 @@  properties:
       - description: Address and length of PHY's common serdes block.
 
   "#clock-cells":
-     enum: [ 1, 2 ]
+    enum: [ 1, 2 ]
 
   "#address-cells":
     enum: [ 1, 2 ]
@@ -65,16 +65,15 @@  properties:
 
   vdda-phy-supply:
     description:
-        Phandle to a regulator supply to PHY core block.
+      Phandle to a regulator supply to PHY core block.
 
   vdda-pll-supply:
     description:
-        Phandle to 1.8V regulator supply to PHY refclk pll block.
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
 
   vddp-ref-clk-supply:
     description:
-        Phandle to a regulator supply to any specific refclk
-        pll block.
+      Phandle to a regulator supply to any specific refclk pll block.
 
 #Required nodes:
 patternProperties:
@@ -184,8 +183,8 @@  allOf:
             - description: phy common block reset.
         reset-names:
           items:
-             - const: phy
-             - const: common
+            - const: phy
+            - const: common
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
index 6e2487501457..ef8ae9f73092 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
@@ -26,7 +26,7 @@  properties:
       - const: dp_com
 
   "#clock-cells":
-     enum: [ 1, 2 ]
+    enum: [ 1, 2 ]
 
   "#address-cells":
     enum: [ 1, 2 ]
@@ -62,16 +62,15 @@  properties:
 
   vdda-phy-supply:
     description:
-        Phandle to a regulator supply to PHY core block.
+      Phandle to a regulator supply to PHY core block.
 
   vdda-pll-supply:
     description:
-        Phandle to 1.8V regulator supply to PHY refclk pll block.
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
 
   vddp-ref-clk-supply:
     description:
-        Phandle to a regulator supply to any specific refclk
-        pll block.
+      Phandle to a regulator supply to any specific refclk pll block.
 
 #Required nodes:
 patternProperties:
diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
index 9ba62dcb1e5d..ccda92859eca 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
@@ -17,15 +17,15 @@  properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - qcom,ipq8074-qusb2-phy
-          - qcom,msm8996-qusb2-phy
-          - qcom,msm8998-qusb2-phy
+          - enum:
+              - qcom,ipq8074-qusb2-phy
+              - qcom,msm8996-qusb2-phy
+              - qcom,msm8998-qusb2-phy
       - items:
-        - enum:
-          - qcom,sc7180-qusb2-phy
-          - qcom,sdm845-qusb2-phy
-        - const: qcom,qusb2-v2-phy
+          - enum:
+              - qcom,sc7180-qusb2-phy
+              - qcom,sdm845-qusb2-phy
+          - const: qcom,qusb2-v2-phy
   reg:
     maxItems: 1
 
@@ -49,12 +49,12 @@  properties:
       - const: iface
 
   vdda-pll-supply:
-     description:
-       Phandle to 1.8V regulator supply to PHY refclk pll block.
+    description:
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
 
   vdda-phy-dpdm-supply:
-     description:
-       Phandle to 3.1V regulator supply to Dp/Dm port signals.
+    description:
+      Phandle to 3.1V regulator supply to Dp/Dm port signals.
 
   resets:
     maxItems: 1
@@ -64,12 +64,12 @@  properties:
   nvmem-cells:
     maxItems: 1
     description:
-        Phandle to nvmem cell that contains 'HS Tx trim'
-        tuning parameter value for qusb2 phy.
+      Phandle to nvmem cell that contains 'HS Tx trim'
+      tuning parameter value for qusb2 phy.
 
   qcom,tcsr-syscon:
     description:
-        Phandle to TCSR syscon register region.
+      Phandle to TCSR syscon register region.
     $ref: /schemas/types.yaml#/definitions/phandle
 
 if:
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml
index 86f49093b65f..a06831fd64b9 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml
@@ -33,8 +33,8 @@  properties:
   clock-names:
     oneOf:
       - items:            # for Pro5
-        - const: gio
-        - const: link
+          - const: gio
+          - const: link
       - const: link       # for others
 
   resets:
@@ -44,8 +44,8 @@  properties:
   reset-names:
     oneOf:
       - items:            # for Pro5
-        - const: gio
-        - const: link
+          - const: gio
+          - const: link
       - const: link       # for others
 
   socionext,syscon:
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
index c871d462c952..6fa5caab1487 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
@@ -37,12 +37,12 @@  properties:
     oneOf:
       - const: link          # for PXs2
       - items:               # for PXs3 with phy-ext
-        - const: link
-        - const: phy
-        - const: phy-ext
+          - const: link
+          - const: phy
+          - const: phy-ext
       - items:               # for others
-        - const: link
-        - const: phy
+          - const: link
+          - const: phy
 
   resets:
     maxItems: 2
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
index edff2c95c9ae..9d46715ed036 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
@@ -37,15 +37,15 @@  properties:
   clock-names:
     oneOf:
       - items:             # for Pro4, Pro5
-        - const: gio
-        - const: link
+          - const: gio
+          - const: link
       - items:             # for PXs3 with phy-ext
-        - const: link
-        - const: phy
-        - const: phy-ext
+          - const: link
+          - const: phy
+          - const: phy-ext
       - items:             # for others
-        - const: link
-        - const: phy
+          - const: link
+          - const: phy
 
   resets:
     maxItems: 2
@@ -53,11 +53,11 @@  properties:
   reset-names:
     oneOf:
       - items:              # for Pro4,Pro5
-        - const: gio
-        - const: link
+          - const: gio
+          - const: link
       - items:              # for others
-        - const: link
-        - const: phy
+          - const: link
+          - const: phy
 
   vbus-supply:
     description: A phandle to the regulator for USB VBUS
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
index 3f913d6d1c3d..5ffc95c62909 100644
--- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
+++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
@@ -203,7 +203,8 @@  examples:
            };
 
            refclk-dig {
-                  clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+                  clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, 
+                          <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
                   #clock-cells = <0>;
                   assigned-clocks = <&wiz0_refclk_dig>;
                   assigned-clock-parents = <&k3_clks 292 11>;
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
index 017d9593573b..54631dc1adb0 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
@@ -34,22 +34,22 @@  patternProperties:
       patternProperties:
         "^function|groups$":
           $ref: "/schemas/types.yaml#/definitions/string"
-          enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
-            ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
-            EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0,
-            GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4,
-            I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK,
-            MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2,
-            NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4,
-            NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0,
-            PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
-            RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3,
-            RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,
-            SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,
-            SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU,
-            SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2,
-            TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM,
-            VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]
+          enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
+                  ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
+                  EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0,
+                  GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4,
+                  I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK,
+                  MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2,
+                  NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4,
+                  NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0,
+                  PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
+                  RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3,
+                  RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,
+                  SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,
+                  SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU,
+                  SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2,
+                  TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM,
+                  VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
index c643d6d44415..a90c0fe0495f 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
@@ -43,24 +43,24 @@  patternProperties:
       patternProperties:
         "^function|groups$":
           $ref: "/schemas/types.yaml#/definitions/string"
-          enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
-            ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
-            ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2,
-            GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5,
-            I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC,
-            LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK,
-            MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,
-            NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2,
-            NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0,
-            PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
-            RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13,
-            SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,
-            SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO,
-            SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG,
-            SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3,
-            TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6,
-            USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS,
-            VGAVS, VPI24, VPO, WDTRST1, WDTRST2]
+          enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
+                  ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
+                  ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2,
+                  GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5,
+                  I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC,
+                  LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK,
+                  MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,
+                  NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2,
+                  NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0,
+                  PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
+                  RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13,
+                  SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,
+                  SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO,
+                  SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG,
+                  SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3,
+                  TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6,
+                  USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS,
+                  VGAVS, VPI24, VPO, WDTRST1, WDTRST2]
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index 1506726c7fea..c78ab7e2eee7 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -31,57 +31,57 @@  patternProperties:
       properties:
         function:
           $ref: "/schemas/types.yaml#/definitions/string"
-          enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
-            ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT,
-            FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3,
-            GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5,
-            GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16,
-            I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5,
-            I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ,
-            MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4,
-            NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2,
-            NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4,
-            NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11,
-            PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8,
-            PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
-            RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14,
-            SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8,
-            SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ,
-            SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,
-            SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14,
-            TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0,
-            THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12,
-            UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,
-            USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4]
+          enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
+                  ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT,
+                  FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3,
+                  GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5,
+                  GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16,
+                  I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5,
+                  I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ,
+                  MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4,
+                  NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2,
+                  NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4,
+                  NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11,
+                  PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8,
+                  PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
+                  RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14,
+                  SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8,
+                  SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ,
+                  SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,
+                  SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14,
+                  TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0,
+                  THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12,
+                  UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,
+                  USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ]
 
         groups:
           $ref: "/schemas/types.yaml#/definitions/string"
-          enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
-            ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
-            EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP,
-            GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
-            GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,
-            I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,
-            I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
-            LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3,
-            MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4,
-            NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
-            NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
-            OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0,
-            PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2,
-            PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1,
-            QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
-            RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1,
-            SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0,
-            SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6,
-            SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL,
-            SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR,
-            SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,
-            TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6,
-            TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3,
-            TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6,
-            UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
-            WDTRST3, WDTRST4]
+          enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
+                  ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
+                  EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP,
+                  GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
+                  GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,
+                  I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,
+                  I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
+                  LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3,
+                  MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4,
+                  NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
+                  NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
+                  OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0,
+                  PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2,
+                  PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1,
+                  QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
+                  RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1,
+                  SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0,
+                  SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6,
+                  SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL,
+                  SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR,
+                  SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,
+                  TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6,
+                  TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3,
+                  TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6,
+                  UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
+                  WDTRST3, WDTRST4]
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
index 18163fb69ce7..44c04d11ae4c 100644
--- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
@@ -32,20 +32,20 @@  properties:
   compatible:
     oneOf:
       - enum:
-        - ingenic,jz4740-pinctrl
-        - ingenic,jz4725b-pinctrl
-        - ingenic,jz4760-pinctrl
-        - ingenic,jz4770-pinctrl
-        - ingenic,jz4780-pinctrl
-        - ingenic,x1000-pinctrl
-        - ingenic,x1500-pinctrl
-        - ingenic,x1830-pinctrl
+          - ingenic,jz4740-pinctrl
+          - ingenic,jz4725b-pinctrl
+          - ingenic,jz4760-pinctrl
+          - ingenic,jz4770-pinctrl
+          - ingenic,jz4780-pinctrl
+          - ingenic,x1000-pinctrl
+          - ingenic,x1500-pinctrl
+          - ingenic,x1830-pinctrl
       - items:
-        - const: ingenic,jz4760b-pinctrl
-        - const: ingenic,jz4760-pinctrl
+          - const: ingenic,jz4760b-pinctrl
+          - const: ingenic,jz4760-pinctrl
       - items:
-        - const: ingenic,x1000e-pinctrl
-        - const: ingenic,x1000-pinctrl
+          - const: ingenic,x1000e-pinctrl
+          - const: ingenic,x1000-pinctrl
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
index b2de3992d484..c64c93206817 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
@@ -60,8 +60,8 @@  patternProperties:
           oneOf:
             - pattern: "^gpio([1-9]|[1-7][0-9]|80)$"
             - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
-              sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
-              qdsd_data3 ]
+                      sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
+                      qdsd_data3 ]
         minItems: 1
         maxItems: 4
 
@@ -70,31 +70,31 @@  patternProperties:
           Specify the alternative function to be configured for the specified
           pins.
         enum: [ adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char,
-          atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac,
-          atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0,
-          atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c,
-          blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c,  blsp1_spi,
-          blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi,
-          blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi,
-          blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi,
-          blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst,
-          cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0,
-          cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v,
-          dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass,
-          flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
-          gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0,
-          gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2,
-          ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc,
-          nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s,
-          pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
-          pwr_modem_enabled_a,  pwr_modem_enabled_b, pwr_nav_enabled_a,
-          pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1,
-          qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0,
-          qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1,
-          qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
-          qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write,
-          sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3,
-          uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ]
+                atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac,
+                atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0,
+                atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c,
+                blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi,
+                blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi,
+                blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi,
+                blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi,
+                blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst,
+                cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0,
+                cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v,
+                dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass,
+                flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
+                gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0,
+                gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2,
+                ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc,
+                nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s,
+                pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
+                pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
+                pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1,
+                qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0,
+                qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1,
+                qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
+                qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write,
+                sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3,
+                uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ]
 
       drive-strength:
         enum: [2, 4, 6, 8, 10, 12, 14, 16]
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
index 6dc3b52f47cd..8508c57522fd 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
@@ -76,22 +76,22 @@  patternProperties:
             pins.
 
           enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c,
-            cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
-            cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
-            ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
-            ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
-            mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
-            mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
-            mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
-            pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
-            pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
-            qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
-            qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
-            qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
-            sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
-            tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
-            tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
-            tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
+                  cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
+                  cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                  ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
+                  ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
+                  mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
+                  mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
+                  mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
+                  pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
+                  pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
+                  qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
+                  qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
+                  qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
+                  sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
+                  tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
+                  tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
+                  tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
 
         drive-strength:
           enum: [2, 4, 6, 8, 10, 12, 14, 16]
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
index 0857cbeeb43c..72877544ca78 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -48,8 +48,8 @@  properties:
 
   st,package:
     description:
-     Indicates the SOC package used.
-     More details in include/dt-bindings/pinctrl/stm32-pinfunc.h
+      Indicates the SOC package used.
+      More details in include/dt-bindings/pinctrl/stm32-pinfunc.h
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [1, 2, 4, 8]
 
diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml
index ff5936e4a215..dd564349aa53 100644
--- a/Documentation/devicetree/bindings/power/power-domain.yaml
+++ b/Documentation/devicetree/bindings/power/power-domain.yaml
@@ -58,13 +58,13 @@  properties:
 
   power-domains:
     description:
-       A phandle and PM domain specifier as defined by bindings of the power
-       controller specified by phandle. Some power domains might be powered
-       from another power domain (or have other hardware specific
-       dependencies). For representing such dependency a standard PM domain
-       consumer binding is used. When provided, all domains created
-       by the given provider should be subdomains of the domain specified
-       by this binding.
+      A phandle and PM domain specifier as defined by bindings of the power
+      controller specified by phandle. Some power domains might be powered
+      from another power domain (or have other hardware specific
+      dependencies). For representing such dependency a standard PM domain
+      consumer binding is used. When provided, all domains created
+      by the given provider should be subdomains of the domain specified
+      by this binding.
 
 required:
   - "#power-domain-cells"
diff --git a/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
index 30eabbb14ef3..6244b8ee9402 100644
--- a/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
@@ -44,9 +44,9 @@  required:
 
 anyOf:
   - required:
-    - gpios
+      - gpios
   - required:
-    - charge-status-gpios
+      - charge-status-gpios
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
index d2022206081f..c0d7700afee7 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
@@ -76,8 +76,7 @@  patternProperties:
 
   "^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$":
     description: List of regulators and its properties
-    allOf:
-     - $ref: regulator.yaml#
+    $ref: regulator.yaml#
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
index 085cbd1ad8d0..fb111e2d5b99 100644
--- a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
@@ -29,7 +29,7 @@  properties:
           Short-circuit interrupt for lab.
 
     required:
-    - interrupts
+      - interrupts
 
   ibb:
     type: object
@@ -42,7 +42,7 @@  properties:
           Short-circuit interrupt for lab.
 
     required:
-    - interrupts
+      - interrupts
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
index 24b0c50fa436..6070456a7b67 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
@@ -118,16 +118,16 @@  else:
           - const: l1dram
 
 required:
- - compatible
- - reg
- - reg-names
- - ti,sci
- - ti,sci-dev-id
- - ti,sci-proc-ids
- - resets
- - firmware-name
- - mboxes
- - memory-region
+  - compatible
+  - reg
+  - reg-names
+  - ti,sci
+  - ti,sci-dev-id
+  - ti,sci-proc-ids
+  - resets
+  - firmware-name
+  - mboxes
+  - memory-region
 
 unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml b/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml
index b1a71c1bb05b..569cd3bd3a70 100644
--- a/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml
+++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml
@@ -24,9 +24,9 @@  properties:
   compatible:
     items:
       - enum:
-        - fsl,imx7d-src
-        - fsl,imx8mq-src
-        - fsl,imx8mp-src
+          - fsl,imx7d-src
+          - fsl,imx8mq-src
+          - fsl,imx8mp-src
       - const: syscon
 
   reg:
diff --git a/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml
index 4206bf8a2469..bc2c7e53a28e 100644
--- a/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml
@@ -16,16 +16,16 @@  properties:
   compatible:
     oneOf:
       - enum:
-        - ingenic,jz4740-rtc
-        - ingenic,jz4760-rtc
+          - ingenic,jz4740-rtc
+          - ingenic,jz4760-rtc
       - items:
-        - const: ingenic,jz4725b-rtc
-        - const: ingenic,jz4740-rtc
+          - const: ingenic,jz4725b-rtc
+          - const: ingenic,jz4740-rtc
       - items:
-        - enum:
-          - ingenic,jz4770-rtc
-          - ingenic,jz4780-rtc
-        - const: ingenic,jz4760-rtc
+          - enum:
+              - ingenic,jz4770-rtc
+              - ingenic,jz4780-rtc
+          - const: ingenic,jz4760-rtc
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml
index c023d650e9c1..dc8349322c83 100644
--- a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml
@@ -16,18 +16,18 @@  properties:
   compatible:
     oneOf:
       - enum:
-        - ingenic,jz4740-uart
-        - ingenic,jz4760-uart
-        - ingenic,jz4780-uart
-        - ingenic,x1000-uart
+          - ingenic,jz4740-uart
+          - ingenic,jz4760-uart
+          - ingenic,jz4780-uart
+          - ingenic,x1000-uart
       - items:
-        - enum:
-          - ingenic,jz4770-uart
-          - ingenic,jz4775-uart
-        - const: ingenic,jz4760-uart
+          - enum:
+              - ingenic,jz4770-uart
+              - ingenic,jz4775-uart
+          - const: ingenic,jz4760-uart
       - items:
-        - const: ingenic,jz4725b-uart
-        - const: ingenic,jz4740-uart
+          - const: ingenic,jz4725b-uart
+          - const: ingenic,jz4740-uart
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
index 3cd0b70cd6cf..55fffae05dcf 100644
--- a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
+++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
@@ -97,13 +97,13 @@  allOf:
         clock-names:
           oneOf:
             - items:
-              - const: t0_clk
-              - const: slow_clk
+                - const: t0_clk
+                - const: slow_clk
             - items:
-              - const: t0_clk
-              - const: t1_clk
-              - const: t2_clk
-              - const: slow_clk
+                - const: t0_clk
+                - const: t1_clk
+                - const: t2_clk
+                - const: slow_clk
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
index a2b29cc3e93b..bd04fdb57414 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
@@ -7,8 +7,8 @@  $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: GENI Serial Engine QUP Wrapper Controller
 
 maintainers:
- - Mukesh Savaliya <msavaliy@codeaurora.org>
- - Akash Asthana <akashast@codeaurora.org>
+  - Mukesh Savaliya <msavaliy@codeaurora.org>
+  - Akash Asthana <akashast@codeaurora.org>
 
 description: |
  Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
@@ -38,10 +38,10 @@  properties:
       - description: Slave AHB Clock
 
   "#address-cells":
-     const: 2
+    const: 2
 
   "#size-cells":
-     const: 2
+    const: 2
 
   ranges: true
 
@@ -79,15 +79,15 @@  patternProperties:
         maxItems: 1
 
       interconnects:
-         minItems: 2
-         maxItems: 3
+        minItems: 2
+        maxItems: 3
 
       interconnect-names:
-         minItems: 2
-         items:
-           - const: qup-core
-           - const: qup-config
-           - const: qup-memory
+        minItems: 2
+        items:
+          - const: qup-core
+          - const: qup-config
+          - const: qup-memory
 
     required:
       - reg
@@ -111,10 +111,10 @@  patternProperties:
         maxItems: 1
 
       "#address-cells":
-         const: 1
+        const: 1
 
       "#size-cells":
-         const: 0
+        const: 0
 
     required:
       - compatible
@@ -136,10 +136,10 @@  patternProperties:
         maxItems: 1
 
       "#address-cells":
-         const: 1
+        const: 1
 
       "#size-cells":
-         const: 0
+        const: 0
 
       clock-frequency:
         description: Desired I2C bus clock frequency in Hz.
diff --git a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
index f9344adaf6c2..7a7f28469624 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
+++ b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
@@ -19,12 +19,11 @@  properties:
   compatible:
     items:
       - enum:
-        - amlogic,aiu-gxbb
-        - amlogic,aiu-gxl
-        - amlogic,aiu-meson8
-        - amlogic,aiu-meson8b
-      - const:
-          amlogic,aiu
+          - amlogic,aiu-gxbb
+          - amlogic,aiu-gxl
+          - amlogic,aiu-meson8
+          - amlogic,aiu-meson8b
+      - const: amlogic,aiu
 
   clocks:
     items:
diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml
index 51a0c30e10f9..b4b3828c40af 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml
+++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml
@@ -19,13 +19,11 @@  properties:
   compatible:
     oneOf:
       - items:
-        - const:
-            amlogic,g12a-toacodec
+          - const: amlogic,g12a-toacodec
       - items:
-        - enum:
-          - amlogic,sm1-toacodec
-        - const:
-            amlogic,g12a-toacodec
+          - enum:
+              - amlogic,sm1-toacodec
+          - const: amlogic,g12a-toacodec
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
index 83f44f07ac3f..5bcb643c288f 100644
--- a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
@@ -11,7 +11,7 @@  maintainers:
 
 properties:
   compatible:
-      const: cirrus,cs42l51
+    const: cirrus,cs42l51
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml
index 44f49bebb267..cdc0fdaab30a 100644
--- a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml
+++ b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml
@@ -16,13 +16,13 @@  properties:
   compatible:
     oneOf:
       - enum:
-        - ingenic,jz4740-i2s
-        - ingenic,jz4760-i2s
-        - ingenic,jz4770-i2s
-        - ingenic,jz4780-i2s
+          - ingenic,jz4740-i2s
+          - ingenic,jz4760-i2s
+          - ingenic,jz4770-i2s
+          - ingenic,jz4780-i2s
       - items:
-        - const: ingenic,jz4725b-i2s
-        - const: ingenic,jz4740-i2s
+          - const: ingenic,jz4725b-i2s
+          - const: ingenic,jz4740-i2s
 
   '#sound-dai-cells':
     const: 0
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98390.yaml b/Documentation/devicetree/bindings/sound/maxim,max98390.yaml
index e5ac35280da3..9c2e3effa0c0 100644
--- a/Documentation/devicetree/bindings/sound/maxim,max98390.yaml
+++ b/Documentation/devicetree/bindings/sound/maxim,max98390.yaml
@@ -11,7 +11,7 @@  maintainers:
 
 properties:
   compatible:
-      const: maxim,max98390
+    const: maxim,max98390
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
index acb2b888dbfc..245895b58a2f 100644
--- a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
@@ -19,16 +19,16 @@  properties:
       - const: rockchip,rk3066-i2s
       - items:
           - enum:
-            - rockchip,px30-i2s
-            - rockchip,rk3036-i2s
-            - rockchip,rk3188-i2s
-            - rockchip,rk3228-i2s
-            - rockchip,rk3288-i2s
-            - rockchip,rk3308-i2s
-            - rockchip,rk3328-i2s
-            - rockchip,rk3366-i2s
-            - rockchip,rk3368-i2s
-            - rockchip,rk3399-i2s
+              - rockchip,px30-i2s
+              - rockchip,rk3036-i2s
+              - rockchip,rk3188-i2s
+              - rockchip,rk3228-i2s
+              - rockchip,rk3288-i2s
+              - rockchip,rk3308-i2s
+              - rockchip,rk3328-i2s
+              - rockchip,rk3366-i2s
+              - rockchip,rk3368-i2s
+              - rockchip,rk3399-i2s
           - const: rockchip,rk3066-i2s
 
   reg:
@@ -55,8 +55,8 @@  properties:
     oneOf:
       - const: rx
       - items:
-        - const: tx
-        - const: rx
+          - const: tx
+          - const: rx
 
   power-domains:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
index c467152656f7..7bad6f16fe60 100644
--- a/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
+++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
@@ -25,8 +25,8 @@  properties:
       - const: rockchip,rk3399-spdif
       - items:
           - enum:
-            - rockchip,rk3188-spdif
-            - rockchip,rk3288-spdif
+              - rockchip,rk3188-spdif
+              - rockchip,rk3288-spdif
           - const: rockchip,rk3066-spdif
 
   reg:
diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml
index 8192450d72dc..33a90f829c80 100644
--- a/Documentation/devicetree/bindings/sound/tas2770.yaml
+++ b/Documentation/devicetree/bindings/sound/tas2770.yaml
@@ -44,8 +44,8 @@  properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: Sets TDM RX capture edge.
     enum:
-          - 0 # Rising edge
-          - 1 # Falling edge
+      - 0 # Rising edge
+      - 1 # Falling edge
 
   '#sound-dai-cells':
     const: 1
diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
index e84d4a20c633..f578f17f3e04 100644
--- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
+++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
@@ -32,32 +32,32 @@  properties:
   reg:
     maxItems: 1
     description: |
-       I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
+      I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
 
   reset-gpios:
     description: |
-       GPIO used for hardware reset.
+      GPIO used for hardware reset.
 
   areg-supply:
-      description: |
-       Regulator with AVDD at 3.3V.  If not defined then the internal regulator
-       is enabled.
+    description: |
+      Regulator with AVDD at 3.3V.  If not defined then the internal regulator
+      is enabled.
 
   ti,mic-bias-source:
     description: |
-       Indicates the source for MIC Bias.
-       0 - Mic bias is set to VREF
-       1 - Mic bias is set to VREF × 1.096
-       6 - Mic bias is set to AVDD
+      Indicates the source for MIC Bias.
+      0 - Mic bias is set to VREF
+      1 - Mic bias is set to VREF × 1.096
+      6 - Mic bias is set to AVDD
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1, 6]
 
   ti,vref-source:
     description: |
-       Indicates the source for MIC Bias.
-       0 - Set VREF to 2.75V
-       1 - Set VREF to 2.5V
-       2 - Set VREF to 1.375V
+      Indicates the source for MIC Bias.
+      0 - Set VREF to 2.75V
+      1 - Set VREF to 2.5V
+      2 - Set VREF to 1.375V
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1, 2]
 
@@ -109,7 +109,7 @@  properties:
     default: [0, 0, 0, 0]
 
 patternProperties:
- '^ti,gpo-config-[1-4]$':
+  '^ti,gpo-config-[1-4]$':
     $ref: /schemas/types.yaml#/definitions/uint32-array
     description: |
        Defines the configuration and output driver for the general purpose
diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
index 243a6b1e66ea..7866a655d81c 100644
--- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
@@ -22,10 +22,10 @@  properties:
       - const: allwinner,sun6i-a31-spi
       - const: allwinner,sun8i-h3-spi
       - items:
-        - enum:
-          - allwinner,sun8i-r40-spi
-          - allwinner,sun50i-h6-spi
-        - const: allwinner,sun8i-h3-spi
+          - enum:
+              - allwinner,sun8i-r40-spi
+              - allwinner,sun50i-h6-spi
+          - const: allwinner,sun8i-h3-spi
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
index 6e44c9c2aeba..1b50cedbfb3e 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
@@ -23,19 +23,19 @@  properties:
       - const: fsl,imx51-ecspi
       - const: fsl,imx53-ecspi
       - items:
-        - enum:
-          - fsl,imx50-ecspi
-          - fsl,imx6q-ecspi
-          - fsl,imx6sx-ecspi
-          - fsl,imx6sl-ecspi
-          - fsl,imx6sll-ecspi
-          - fsl,imx6ul-ecspi
-          - fsl,imx7d-ecspi
-          - fsl,imx8mq-ecspi
-          - fsl,imx8mm-ecspi
-          - fsl,imx8mn-ecspi
-          - fsl,imx8mp-ecspi
-        - const: fsl,imx51-ecspi
+          - enum:
+              - fsl,imx50-ecspi
+              - fsl,imx6q-ecspi
+              - fsl,imx6sx-ecspi
+              - fsl,imx6sl-ecspi
+              - fsl,imx6sll-ecspi
+              - fsl,imx6ul-ecspi
+              - fsl,imx7d-ecspi
+              - fsl,imx8mq-ecspi
+              - fsl,imx8mm-ecspi
+              - fsl,imx8mn-ecspi
+              - fsl,imx8mp-ecspi
+          - const: fsl,imx51-ecspi
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
index 4ddb42a4ae05..9102feae90a2 100644
--- a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
@@ -33,4 +33,5 @@  examples:
         reg = <0x1f000000 0x10>;
     };
 
-...
\ No newline at end of file
+...
+
diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml
index 0ae692dc28b5..3d3fed63409b 100644
--- a/Documentation/devicetree/bindings/spi/spi-mux.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml
@@ -43,47 +43,47 @@  properties:
     maxItems: 1
 
 required:
-   - compatible
-   - reg
-   - spi-max-frequency
-   - mux-controls
+  - compatible
+  - reg
+  - spi-max-frequency
+  - mux-controls
 
 examples:
-   - |
-     #include <dt-bindings/gpio/gpio.h>
-     mux: mux-controller {
-       compatible = "gpio-mux";
-       #mux-control-cells = <0>;
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    mux: mux-controller {
+        compatible = "gpio-mux";
+        #mux-control-cells = <0>;
 
-       mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
-     };
+        mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+    };
 
-     spi {
-       #address-cells = <1>;
-       #size-cells = <0>;
-       spi@0 {
-         compatible = "spi-mux";
-         reg = <0>;
-         #address-cells = <1>;
-         #size-cells = <0>;
-         spi-max-frequency = <100000000>;
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        spi@0 {
+            compatible = "spi-mux";
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            spi-max-frequency = <100000000>;
 
-         mux-controls = <&mux>;
+            mux-controls = <&mux>;
 
-         spi-flash@0 {
-           compatible = "jedec,spi-nor";
-           reg = <0>;
-           #address-cells = <1>;
-           #size-cells = <0>;
-           spi-max-frequency = <40000000>;
-         };
+            spi-flash@0 {
+                compatible = "jedec,spi-nor";
+                reg = <0>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                spi-max-frequency = <40000000>;
+            };
 
-         spi-device@1 {
-           compatible = "lineartechnology,ltc2488";
-           reg = <1>;
-           #address-cells = <1>;
-           #size-cells = <0>;
-           spi-max-frequency = <10000000>;
-         };
-       };
-     };
+            spi-device@1 {
+                compatible = "lineartechnology,ltc2488";
+                reg = <1>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                spi-max-frequency = <10000000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
index 81ad4b761502..74dc6185eced 100644
--- a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
@@ -26,13 +26,13 @@  properties:
       - const: rockchip,rv1108-spi
       - items:
           - enum:
-            - rockchip,px30-spi
-            - rockchip,rk3188-spi
-            - rockchip,rk3288-spi
-            - rockchip,rk3308-spi
-            - rockchip,rk3328-spi
-            - rockchip,rk3368-spi
-            - rockchip,rk3399-spi
+              - rockchip,px30-spi
+              - rockchip,rk3188-spi
+              - rockchip,rk3288-spi
+              - rockchip,rk3308-spi
+              - rockchip,rk3328-spi
+              - rockchip,rk3368-spi
+              - rockchip,rk3399-spi
           - const: rockchip,rk3066-spi
 
   reg:
diff --git a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
index 5145883d932e..ad4beaf02842 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
@@ -44,9 +44,9 @@  select: true
 properties:
   "#cooling-cells":
     description:
-        Must be 2, in order to specify minimum and maximum cooling state used in
-        the cooling-maps reference. The first cell is the minimum cooling state
-        and the second cell is the maximum cooling state requested.
+      Must be 2, in order to specify minimum and maximum cooling state used in
+      the cooling-maps reference. The first cell is the minimum cooling state
+      and the second cell is the maximum cooling state requested.
     const: 2
 
 examples:
diff --git a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml
index 7a922f540934..a832d427e9d5 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml
@@ -18,29 +18,28 @@  description: |
   This binding describes the thermal idle node.
 
 properties:
-   $nodename:
-     const: thermal-idle
-     description: |
-        A thermal-idle node describes the idle cooling device properties to
-        cool down efficiently the attached thermal zone.
-
-   '#cooling-cells':
-      const: 2
-      description: |
-         Must be 2, in order to specify minimum and maximum cooling state used in
-         the cooling-maps reference. The first cell is the minimum cooling state
-         and the second cell is the maximum cooling state requested.
-
-   duration-us:
-      description: |
-         The idle duration in microsecond the device should cool down.
-
-   exit-latency-us:
-      description: |
-         The exit latency constraint in microsecond for the injected
-         idle state for the device. It is the latency constraint to
-         apply when selecting an idle state from among all the present
-         ones.
+  $nodename:
+    const: thermal-idle
+    description: |
+      A thermal-idle node describes the idle cooling device properties to
+      cool down efficiently the attached thermal zone.
+
+  '#cooling-cells':
+    const: 2
+    description: |
+      Must be 2, in order to specify minimum and maximum cooling state used in
+      the cooling-maps reference. The first cell is the minimum cooling state
+      and the second cell is the maximum cooling state requested.
+
+  duration-us:
+    description: |
+      The idle duration in microsecond the device should cool down.
+
+  exit-latency-us:
+    description: |
+      The exit latency constraint in microsecond for the injected idle state 
+      for the device. It is the latency constraint to apply when selecting an 
+      idle state from among all the present ones.
 
 required:
   - '#cooling-cells'
diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
index 883f7f46650b..a4f51f46b7a1 100644
--- a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
+++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
@@ -20,17 +20,17 @@  properties:
       - const: fsl,imx31-gpt
       - items:
           - enum:
-            - fsl,imx25-gpt
-            - fsl,imx50-gpt
-            - fsl,imx51-gpt
-            - fsl,imx53-gpt
-            - fsl,imx6q-gpt
+              - fsl,imx25-gpt
+              - fsl,imx50-gpt
+              - fsl,imx51-gpt
+              - fsl,imx53-gpt
+              - fsl,imx6q-gpt
           - const: fsl,imx31-gpt
       - const: fsl,imx6dl-gpt
       - items:
           - enum:
-            - fsl,imx6sl-gpt
-            - fsl,imx6sx-gpt
+              - fsl,imx6sl-gpt
+              - fsl,imx6sx-gpt
           - const: fsl,imx6dl-gpt
 
   reg:
diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml
index 371fb02a4351..024bcad75101 100644
--- a/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml
+++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml
@@ -49,16 +49,16 @@  properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - ingenic,jz4740-tcu
-          - ingenic,jz4725b-tcu
-          - ingenic,jz4770-tcu
-          - ingenic,x1000-tcu
-        - const: simple-mfd
+          - enum:
+              - ingenic,jz4740-tcu
+              - ingenic,jz4725b-tcu
+              - ingenic,jz4770-tcu
+              - ingenic,x1000-tcu
+          - const: simple-mfd
       - items:
-        - const: ingenic,jz4780-tcu
-        - const: ingenic,jz4770-tcu
-        - const: simple-mfd
+          - const: ingenic,jz4780-tcu
+          - const: ingenic,jz4770-tcu
+          - const: simple-mfd
 
   reg:
     maxItems: 1
@@ -113,13 +113,13 @@  patternProperties:
       compatible:
         oneOf:
           - enum:
-            - ingenic,jz4740-watchdog
-            - ingenic,jz4780-watchdog
+              - ingenic,jz4740-watchdog
+              - ingenic,jz4780-watchdog
           - items:
-            - enum:
-              - ingenic,jz4770-watchdog
-              - ingenic,jz4725b-watchdog
-            - const: ingenic,jz4740-watchdog
+              - enum:
+                  - ingenic,jz4770-watchdog
+                  - ingenic,jz4725b-watchdog
+              - const: ingenic,jz4740-watchdog
 
       reg:
         maxItems: 1
@@ -143,13 +143,13 @@  patternProperties:
       compatible:
         oneOf:
           - enum:
-            - ingenic,jz4740-pwm
-            - ingenic,jz4725b-pwm
+              - ingenic,jz4740-pwm
+              - ingenic,jz4725b-pwm
           - items:
-            - enum:
-              - ingenic,jz4770-pwm
-              - ingenic,jz4780-pwm
-            - const: ingenic,jz4740-pwm
+              - enum:
+                  - ingenic,jz4770-pwm
+                  - ingenic,jz4780-pwm
+              - const: ingenic,jz4740-pwm
 
       reg:
         maxItems: 1
@@ -182,11 +182,11 @@  patternProperties:
       compatible:
         oneOf:
           - enum:
-            - ingenic,jz4725b-ost
-            - ingenic,jz4770-ost
+              - ingenic,jz4725b-ost
+              - ingenic,jz4770-ost
           - items:
-            - const: ingenic,jz4780-ost
-            - const: ingenic,jz4770-ost
+              - const: ingenic,jz4780-ost
+              - const: ingenic,jz4770-ost
 
       reg:
         maxItems: 1
diff --git a/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml b/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml
index 5d300efdf0ca..7b39e3204fb3 100644
--- a/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml
@@ -27,8 +27,8 @@  properties:
   clocks:
     minItems: 1
     items:
-       - description: Timer ticks reference clock source
-       - description: APB interface clock source
+      - description: Timer ticks reference clock source
+      - description: APB interface clock source
 
   clock-names:
     minItems: 1
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index b7e94fe8643f..4ace8039840a 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -298,7 +298,7 @@  properties:
           - national,lm80
             # Temperature sensor with integrated fan control
           - national,lm85
-            # ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator with Two-Wire Interface
+            # I2C ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator
           - national,lm92
             # i2c trusted platform module (TPM)
           - nuvoton,npct501
diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
index 4ff632d82858..ffa157a0fce7 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -19,24 +19,24 @@  properties:
           - const: snps,dwc2
       - items:
           - enum:
-            - rockchip,px30-usb
-            - rockchip,rk3036-usb
-            - rockchip,rk3188-usb
-            - rockchip,rk3228-usb
-            - rockchip,rk3288-usb
-            - rockchip,rk3328-usb
-            - rockchip,rk3368-usb
-            - rockchip,rv1108-usb
+              - rockchip,px30-usb
+              - rockchip,rk3036-usb
+              - rockchip,rk3188-usb
+              - rockchip,rk3228-usb
+              - rockchip,rk3288-usb
+              - rockchip,rk3328-usb
+              - rockchip,rk3368-usb
+              - rockchip,rv1108-usb
           - const: rockchip,rk3066-usb
           - const: snps,dwc2
       - const: lantiq,arx100-usb
       - const: lantiq,xrx200-usb
       - items:
           - enum:
-            - amlogic,meson8-usb
-            - amlogic,meson8b-usb
-            - amlogic,meson-gxbb-usb
-            - amlogic,meson-g12a-usb
+              - amlogic,meson8-usb
+              - amlogic,meson8b-usb
+              - amlogic,meson-gxbb-usb
+              - amlogic,meson-g12a-usb
           - const: snps,dwc2
       - const: amcc,dwc-otg
       - const: snps,dwc2
@@ -116,12 +116,13 @@  properties:
 
   snps,need-phy-for-wake:
     $ref: /schemas/types.yaml#/definitions/flag
-    description: If present indicates that the phy needs to be left on for remote wakeup during suspend.
+    description: If present indicates that the phy needs to be left on for 
+      remote wakeup during suspend.
 
   snps,reset-phy-on-wake:
     $ref: /schemas/types.yaml#/definitions/flag
-    description: If present indicates that we need to reset the PHY when we detect a wakeup.
-                 This is due to a hardware errata.
+    description: If present indicates that we need to reset the PHY when we 
+      detect a wakeup. This is due to a hardware errata.
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
index 69f3f26d1207..247ef00381ea 100644
--- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
@@ -80,7 +80,7 @@  properties:
   companion:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-     Phandle of a companion.
+      Phandle of a companion.
 
   phys:
     description: PHY specifier for the USB PHY
diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
index c334aea6b59d..678396eeeb78 100644
--- a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
+++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
@@ -16,11 +16,11 @@  properties:
   compatible:
     oneOf:
       - enum:
-        - ingenic,jz4770-musb
-        - ingenic,jz4740-musb
+          - ingenic,jz4770-musb
+          - ingenic,jz4740-musb
       - items:
-        - const: ingenic,jz4725b-musb
-        - const: ingenic,jz4740-musb
+          - const: ingenic,jz4725b-musb
+          - const: ingenic,jz4740-musb
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
index 0073763a30d8..196589c93373 100644
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
@@ -57,11 +57,11 @@  properties:
     minItems: 4
     maxItems: 5
     items:
-     - const: dev
-     - const: ss
-     - const: ss_src
-     - const: fs_src
-     - const: hs_src
+      - const: dev
+      - const: ss
+      - const: ss_src
+      - const: fs_src
+      - const: hs_src
 
   power-domains:
     items:
diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
index 90750255792f..484fc1091d7c 100644
--- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
@@ -19,9 +19,9 @@  properties:
 
   power-domains:
     description:
-       PM domain provider node and an args specifier containing
-       the USB device id value. See,
-       Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+      PM domain provider node and an args specifier containing
+      the USB device id value. See,
+      Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
 
   clocks:
     description: Clock phandles to usb2_refclk and lpm_clk
diff --git a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml
index 804b9b4f6654..c1b19fc5d0a2 100644
--- a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml
@@ -13,8 +13,8 @@  properties:
   compatible:
     items:
       - enum:
-        - ti,keystone-dwc3
-        - ti,am654-dwc3
+          - ti,keystone-dwc3
+          - ti,am654-dwc3
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index f3d847832fdc..2baee2c817c1 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -993,7 +993,8 @@  patternProperties:
   "^sst,.*":
     description: Silicon Storage Technology, Inc.
   "^sstar,.*":
-    description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. (formerly part of MStar Semiconductor, Inc.)
+    description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. 
+      (formerly part of MStar Semiconductor, Inc.)
   "^st,.*":
     description: STMicroelectronics
   "^starry,.*":