diff mbox series

[1/4] dt-bindings: display: samsung, amoled-mipi-dsi: Do not require enable-gpios on samsung, s6e63j0x03

Message ID 20200829172532.29358-1-krzk@kernel.org (mailing list archive)
State New, archived
Headers show
Series [1/4] dt-bindings: display: samsung, amoled-mipi-dsi: Do not require enable-gpios on samsung, s6e63j0x03 | expand

Commit Message

Krzysztof Kozlowski Aug. 29, 2020, 5:25 p.m. UTC
The samsung,s6e63j0x03 does not have enable GPIO, so do not require it.
This fixes dtbs_check warning:

  arch/arm/boot/dts/exynos3250-rinato.dt.yaml: panel@0: 'enable-gpios' is a required property

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 .../display/panel/samsung,amoled-mipi-dsi.yaml       | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

Comments

Sam Ravnborg Aug. 29, 2020, 9:06 p.m. UTC | #1
On Sat, Aug 29, 2020 at 07:25:29PM +0200, Krzysztof Kozlowski wrote:
> The samsung,s6e63j0x03 does not have enable GPIO, so do not require it.
> This fixes dtbs_check warning:
> 
>   arch/arm/boot/dts/exynos3250-rinato.dt.yaml: panel@0: 'enable-gpios' is a required property
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

I expect this patch is picked up with the dts fixes.

	Sam

> ---
>  .../display/panel/samsung,amoled-mipi-dsi.yaml       | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
> index 96bdde9298e0..ccc482570d6a 100644
> --- a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
> @@ -12,6 +12,17 @@ maintainers:
>  allOf:
>    - $ref: panel-common.yaml#
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - samsung,s6e3ha2
> +              - samsung,s6e3hf2
> +    then:
> +      required:
> +        - enable-gpios
> +
>  properties:
>    compatible:
>      enum:
> @@ -39,7 +50,6 @@ required:
>    - vdd3-supply
>    - vci-supply
>    - reset-gpios
> -  - enable-gpios
>  
>  additionalProperties: false
>  
> -- 
> 2.17.1
Rob Herring (Arm) Sept. 14, 2020, 6:16 p.m. UTC | #2
On Sat, 29 Aug 2020 19:25:29 +0200, Krzysztof Kozlowski wrote:
> The samsung,s6e63j0x03 does not have enable GPIO, so do not require it.
> This fixes dtbs_check warning:
> 
>   arch/arm/boot/dts/exynos3250-rinato.dt.yaml: panel@0: 'enable-gpios' is a required property
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>  .../display/panel/samsung,amoled-mipi-dsi.yaml       | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
> 

Applied, thanks!
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
index 96bdde9298e0..ccc482570d6a 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
@@ -12,6 +12,17 @@  maintainers:
 allOf:
   - $ref: panel-common.yaml#
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s6e3ha2
+              - samsung,s6e3hf2
+    then:
+      required:
+        - enable-gpios
+
 properties:
   compatible:
     enum:
@@ -39,7 +50,6 @@  required:
   - vdd3-supply
   - vci-supply
   - reset-gpios
-  - enable-gpios
 
 additionalProperties: false