diff mbox series

[v2,3/3] drm: panel: add TDO tl070wsh30 panel driver

Message ID 20200907111027.21933-4-narmstrong@baylibre.com (mailing list archive)
State New, archived
Headers show
Series drm: panel: add support for TDO tl070wsh30 panel | expand

Commit Message

Neil Armstrong Sept. 7, 2020, 11:10 a.m. UTC
This adds support for the TDO TL070WSH30 TFT-LCD panel module.
The panel has a 1024×600 resolution and uses 24 bit RGB per pixel.
It provides a MIPI DSI interface to the host, a built-in LED backlight
and touch controller.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/gpu/drm/panel/Kconfig                |  11 +
 drivers/gpu/drm/panel/Makefile               |   1 +
 drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c | 256 +++++++++++++++++++
 3 files changed, 268 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c

Comments

Sam Ravnborg Sept. 7, 2020, 7:52 p.m. UTC | #1
Hi Neil.

On Mon, Sep 07, 2020 at 01:10:27PM +0200, Neil Armstrong wrote:
> This adds support for the TDO TL070WSH30 TFT-LCD panel module.
> The panel has a 1024×600 resolution and uses 24 bit RGB per pixel.
> It provides a MIPI DSI interface to the host, a built-in LED backlight
> and touch controller.

Despite a nicely written driver I noticed a few things that needs to be
addressed.

	Sam
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  drivers/gpu/drm/panel/Kconfig                |  11 +
>  drivers/gpu/drm/panel/Makefile               |   1 +
>  drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c | 256 +++++++++++++++++++
>  3 files changed, 268 insertions(+)
>  create mode 100644 drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c
> 
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 8d97d07c5871..2d488a875b99 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -433,6 +433,17 @@ config DRM_PANEL_SONY_ACX565AKM
>  	  Say Y here if you want to enable support for the Sony ACX565AKM
>  	  800x600 3.5" panel (found on the Nokia N900).
>  
> +config DRM_PANEL_TDO_TL070WSH30
> +	tristate "TDO TL070WSH30 DSI panel"
> +	depends on OF
> +	depends on DRM_MIPI_DSI
> +	depends on BACKLIGHT_CLASS_DEVICE
> +	help
> +	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
> +	  panel module. The panel has a 1024×600 resolution and uses
> +	  24 bit RGB per pixel. It provides a MIPI DSI interface to
> +	  the host, a built-in LED backlight and touch controller.
> +
>  config DRM_PANEL_TPO_TD028TTEC1
>  	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
>  	depends on OF && SPI
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 15a4e7752951..35ee06a1b5c2 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -45,6 +45,7 @@ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
>  obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
>  obj-$(CONFIG_DRM_PANEL_SONY_ACX424AKP) += panel-sony-acx424akp.o
>  obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
> +obj-$(CONFIG_DRM_PANEL_TDO_TL070WSH30) += panel-tdo-tl070wsh30.o
>  obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
>  obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
>  obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
> diff --git a/drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c b/drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c
> new file mode 100644
> index 000000000000..c7a6c2c42c52
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c
> @@ -0,0 +1,256 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2020 BayLibre, SAS
> + * Author: Neil Armstrong <narmstrong@baylibre.com>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_device.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +
> +struct tdo_tl070wsh30_panel {
> +	struct drm_panel base;
> +	struct mipi_dsi_device *link;
> +
> +	struct regulator *supply;
> +	struct gpio_desc *reset_gpio;
> +
> +	bool prepared;
> +};
> +
> +static inline
> +struct tdo_tl070wsh30_panel *to_tdo_tl070wsh30_panel(struct drm_panel *panel)
> +{
> +	return container_of(panel, struct tdo_tl070wsh30_panel, base);
> +}

bikeshedding - but my preference is to order the functions:

prepare
enable
disable
unprepare

As this is the natural order they are used.
Feel free to ignore!

> +
> +static int tdo_tl070wsh30_panel_unprepare(struct drm_panel *panel)
> +{
> +	struct tdo_tl070wsh30_panel *tdo_tl070wsh30 = to_tdo_tl070wsh30_panel(panel);
> +	int err;
> +
> +	if (!tdo_tl070wsh30->prepared)
> +		return 0;
> +
> +	err = mipi_dsi_dcs_set_display_off(tdo_tl070wsh30->link);
> +	if (err < 0)
> +		dev_err(panel->dev, "failed to set display off: %d\n", err);
> +
> +	usleep_range(10000, 11000);
> +
> +	err = mipi_dsi_dcs_enter_sleep_mode(tdo_tl070wsh30->link);
> +	if (err < 0) {
> +		dev_err(panel->dev, "failed to enter sleep mode: %d\n", err);
> +		return err;
> +	}
> +
> +	usleep_range(10000, 11000);
> +
> +	tdo_tl070wsh30->prepared = false;
> +
> +	return 0;
> +}
> +
> +static int tdo_tl070wsh30_panel_prepare(struct drm_panel *panel)
> +{
> +	struct tdo_tl070wsh30_panel *tdo_tl070wsh30 = to_tdo_tl070wsh30_panel(panel);
> +	int err;
> +
> +	if (tdo_tl070wsh30->prepared)
> +		return 0;
> +
> +	err = mipi_dsi_dcs_exit_sleep_mode(tdo_tl070wsh30->link);
> +	if (err < 0) {
> +		dev_err(panel->dev, "failed to exit sleep mode: %d\n", err);
> +		return err;
> +	}
> +
> +	msleep(200);
> +
> +	err = mipi_dsi_dcs_set_display_on(tdo_tl070wsh30->link);
> +	if (err < 0) {
> +		dev_err(panel->dev, "failed to set display on: %d\n", err);
> +		return err;
> +	}
> +
> +	msleep(20);
> +
> +	tdo_tl070wsh30->prepared = true;
> +
> +	return 0;
> +}
> +
> +static const struct drm_display_mode default_mode = {
> +	.clock = 47250,
> +	.hdisplay = 1024,
> +	.hsync_start = 1024 + 46,
> +	.hsync_end = 1024 + 46 + 80,
> +	.htotal = 1024 + 46 + 80 + 100,
> +	.vdisplay = 600,
> +	.vsync_start = 600 + 5,
> +	.vsync_end = 600 + 5 + 5,
> +	.vtotal = 600 + 5 + 5 + 20,
> +	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
> +};
> +
> +static int tdo_tl070wsh30_panel_get_modes(struct drm_panel *panel,
> +				       struct drm_connector *connector)
> +{
> +	struct drm_display_mode *mode;
> +
> +	mode = drm_mode_duplicate(connector->dev, &default_mode);
> +	if (!mode) {
> +		dev_err(panel->dev, "failed to add mode %ux%ux\n", default_mode.hdisplay,
> +			default_mode.vdisplay);
Here we often print the refresh rate too.
If there is no need for the refresh rate than at least drop the extra
'x' at the end of the line.

> +		return -ENOMEM;
> +	}
> +
> +	drm_mode_set_name(mode);
> +
> +	drm_mode_probed_add(connector, mode);
> +
> +	connector->display_info.width_mm = 154;
> +	connector->display_info.height_mm = 85;
> +	connector->display_info.bpc = 8;
> +
> +	return 1;
> +}
> +
> +static const struct drm_panel_funcs tdo_tl070wsh30_panel_funcs = {
> +	.unprepare = tdo_tl070wsh30_panel_unprepare,
> +	.prepare = tdo_tl070wsh30_panel_prepare,
> +	.get_modes = tdo_tl070wsh30_panel_get_modes,
> +};
> +
> +static const struct of_device_id tdo_tl070wsh30_of_match[] = {
> +	{ .compatible = "tdo,tl070wsh30", },
> +	{ }
I often recommends
	{ /* sentinel },

but thats just to be consistent with what I see in other drivers.

> +};
> +MODULE_DEVICE_TABLE(of, tdo_tl070wsh30_of_match);
> +
> +static int tdo_tl070wsh30_panel_add(struct tdo_tl070wsh30_panel *tdo_tl070wsh30)
> +{
> +	struct device *dev = &tdo_tl070wsh30->link->dev;
> +	int err;
> +
> +	tdo_tl070wsh30->supply = devm_regulator_get(dev, "power");
> +	if (IS_ERR(tdo_tl070wsh30->supply))
> +		return PTR_ERR(tdo_tl070wsh30->supply);
> +
> +	tdo_tl070wsh30->reset_gpio = devm_gpiod_get(dev, "reset",
> +						  GPIOD_OUT_LOW);
> +	if (IS_ERR(tdo_tl070wsh30->reset_gpio)) {
> +		err = PTR_ERR(tdo_tl070wsh30->reset_gpio);
> +		dev_dbg(dev, "failed to get reset gpio: %d\n", err);
> +		return err;
> +	}
> +
> +	drm_panel_init(&tdo_tl070wsh30->base, &tdo_tl070wsh30->link->dev,
> +		       &tdo_tl070wsh30_panel_funcs, DRM_MODE_CONNECTOR_DSI);
> +
> +	err = drm_panel_of_backlight(&tdo_tl070wsh30->base);
> +	if (err)
> +		return err;



> +
> +	err = regulator_enable(tdo_tl070wsh30->supply);
> +	if (err < 0)
> +		return err;
> +
> +	usleep_range(10000, 11000);
> +
> +	gpiod_set_value_cansleep(tdo_tl070wsh30->reset_gpio, 1);
> +
> +	usleep_range(10000, 11000);
> +
> +	gpiod_set_value_cansleep(tdo_tl070wsh30->reset_gpio, 0);
> +
> +	msleep(200);
> +

It is the job of the prepare function to turn on the panel,
and likewise the unprepare to turn off the panel.
Please move the code above to the prepare function.


> +	drm_panel_add(&tdo_tl070wsh30->base);
> +
> +	return 0;
> +}
> +
> +static void tdo_tl070wsh30_panel_del(struct tdo_tl070wsh30_panel *tdo_tl070wsh30)
> +{
> +	drm_panel_remove(&tdo_tl070wsh30->base);
> +}
This helper does not gain anything - call drm_panel_remove() direct.

> +
> +static int tdo_tl070wsh30_panel_probe(struct mipi_dsi_device *dsi)
> +{
> +	struct tdo_tl070wsh30_panel *tdo_tl070wsh30;
> +	int err;
> +
> +	dsi->lanes = 4;
> +	dsi->format = MIPI_DSI_FMT_RGB888;
> +	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_LPM;
> +
> +	tdo_tl070wsh30 = devm_kzalloc(&dsi->dev, sizeof(*tdo_tl070wsh30),
> +				    GFP_KERNEL);
> +	if (!tdo_tl070wsh30)
> +		return -ENOMEM;
> +
> +	mipi_dsi_set_drvdata(dsi, tdo_tl070wsh30);
> +	tdo_tl070wsh30->link = dsi;
> +
> +	err = tdo_tl070wsh30_panel_add(tdo_tl070wsh30);
> +	if (err < 0)
> +		return err;
> +
> +	return mipi_dsi_attach(dsi);
> +}
> +
> +static int tdo_tl070wsh30_panel_remove(struct mipi_dsi_device *dsi)
> +{
> +	struct tdo_tl070wsh30_panel *tdo_tl070wsh30 = mipi_dsi_get_drvdata(dsi);
> +	int err;
> +
> +	err = drm_panel_unprepare(&tdo_tl070wsh30->base);
> +	if (err < 0)
> +		dev_err(&dsi->dev, "failed to unprepare panel: %d\n", err);
> +
> +	err = drm_panel_disable(&tdo_tl070wsh30->base);
> +	if (err < 0)
> +		dev_err(&dsi->dev, "failed to disable panel: %d\n", err);
> +
In most panel drivers we just ignore the return results here.

> +	err = mipi_dsi_detach(dsi);
> +	if (err < 0)
> +		dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err);
> +
> +	tdo_tl070wsh30_panel_del(tdo_tl070wsh30);
> +
> +	return 0;
> +}
> +
> +static void tdo_tl070wsh30_panel_shutdown(struct mipi_dsi_device *dsi)
> +{
> +	struct tdo_tl070wsh30_panel *tdo_tl070wsh30 = mipi_dsi_get_drvdata(dsi);
> +
> +	drm_panel_unprepare(&tdo_tl070wsh30->base);
> +	drm_panel_disable(&tdo_tl070wsh30->base);
This is the wrong order. disable before unpreapre.


I am not sure what is right here - but I see some drivers that only have
the disable() + unprepare() in their shutdown() method and then the
remocal in their remove() function.
That makes sense with this split but I have not looked too deep into it.

> +}
> +
> +static struct mipi_dsi_driver tdo_tl070wsh30_panel_driver = {
> +	.driver = {
> +		.name = "panel-tdo-tl070wsh30",
> +		.of_match_table = tdo_tl070wsh30_of_match,
> +	},
> +	.probe = tdo_tl070wsh30_panel_probe,
> +	.remove = tdo_tl070wsh30_panel_remove,
> +	.shutdown = tdo_tl070wsh30_panel_shutdown,
> +};
> +module_mipi_dsi_driver(tdo_tl070wsh30_panel_driver);
> +
> +MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
> +MODULE_DESCRIPTION("TDO TL070WSH30 panel driver");
> +MODULE_LICENSE("GPL v2");
> -- 
> 2.22.0
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
Neil Armstrong Sept. 8, 2020, 7:41 a.m. UTC | #2
Hi,

On 07/09/2020 21:52, Sam Ravnborg wrote:
> Hi Neil.
> 
> On Mon, Sep 07, 2020 at 01:10:27PM +0200, Neil Armstrong wrote:
>> This adds support for the TDO TL070WSH30 TFT-LCD panel module.
>> The panel has a 1024×600 resolution and uses 24 bit RGB per pixel.
>> It provides a MIPI DSI interface to the host, a built-in LED backlight
>> and touch controller.
> 
> Despite a nicely written driver I noticed a few things that needs to be
> addressed.

Thanks for the review, indeed the remove/shutdown was wrong, and I aligned
with panel-simple, which seems more logical.

> 
> 	Sam
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>>  drivers/gpu/drm/panel/Kconfig                |  11 +
>>  drivers/gpu/drm/panel/Makefile               |   1 +
>>  drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c | 256 +++++++++++++++++++
>>  3 files changed, 268 insertions(+)
>>  create mode 100644 drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c
>>
>> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
>> index 8d97d07c5871..2d488a875b99 100644
>> --- a/drivers/gpu/drm/panel/Kconfig
>> +++ b/drivers/gpu/drm/panel/Kconfig
>> @@ -433,6 +433,17 @@ config DRM_PANEL_SONY_ACX565AKM
>>  	  Say Y here if you want to enable support for the Sony ACX565AKM
>>  	  800x600 3.5" panel (found on the Nokia N900).
>>  
>> +config DRM_PANEL_TDO_TL070WSH30
>> +	tristate "TDO TL070WSH30 DSI panel"
>> +	depends on OF
>> +	depends on DRM_MIPI_DSI
>> +	depends on BACKLIGHT_CLASS_DEVICE
>> +	help
>> +	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
>> +	  panel module. The panel has a 1024×600 resolution and uses
>> +	  24 bit RGB per pixel. It provides a MIPI DSI interface to
>> +	  the host, a built-in LED backlight and touch controller.
>> +
>>  config DRM_PANEL_TPO_TD028TTEC1
>>  	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
>>  	depends on OF && SPI
>> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
>> index 15a4e7752951..35ee06a1b5c2 100644
>> --- a/drivers/gpu/drm/panel/Makefile
>> +++ b/drivers/gpu/drm/panel/Makefile
>> @@ -45,6 +45,7 @@ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
>>  obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
>>  obj-$(CONFIG_DRM_PANEL_SONY_ACX424AKP) += panel-sony-acx424akp.o
>>  obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
>> +obj-$(CONFIG_DRM_PANEL_TDO_TL070WSH30) += panel-tdo-tl070wsh30.o
>>  obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
>>  obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
>>  obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
>> diff --git a/drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c b/drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c
>> new file mode 100644
>> index 000000000000..c7a6c2c42c52
>> --- /dev/null
>> +++ b/drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c
>> @@ -0,0 +1,256 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2020 BayLibre, SAS
>> + * Author: Neil Armstrong <narmstrong@baylibre.com>
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/regulator/consumer.h>
>> +
>> +#include <video/mipi_display.h>
>> +
>> +#include <drm/drm_crtc.h>
>> +#include <drm/drm_device.h>
>> +#include <drm/drm_mipi_dsi.h>
>> +#include <drm/drm_modes.h>
>> +#include <drm/drm_panel.h>
>> +
>> +struct tdo_tl070wsh30_panel {
>> +	struct drm_panel base;
>> +	struct mipi_dsi_device *link;
>> +
>> +	struct regulator *supply;
>> +	struct gpio_desc *reset_gpio;
>> +
>> +	bool prepared;
>> +};
>> +
>> +static inline
>> +struct tdo_tl070wsh30_panel *to_tdo_tl070wsh30_panel(struct drm_panel *panel)
>> +{
>> +	return container_of(panel, struct tdo_tl070wsh30_panel, base);
>> +}
> 
> bikeshedding - but my preference is to order the functions:
> 
> prepare
> enable
> disable
> unprepare
> 
> As this is the natural order they are used.
> Feel free to ignore!

Ack, prepare before unprepare looks better !

> 
>> +
>> +static int tdo_tl070wsh30_panel_unprepare(struct drm_panel *panel)
>> +{
>> +	struct tdo_tl070wsh30_panel *tdo_tl070wsh30 = to_tdo_tl070wsh30_panel(panel);
>> +	int err;
>> +
>> +	if (!tdo_tl070wsh30->prepared)
>> +		return 0;
>> +
>> +	err = mipi_dsi_dcs_set_display_off(tdo_tl070wsh30->link);
>> +	if (err < 0)
>> +		dev_err(panel->dev, "failed to set display off: %d\n", err);
>> +
>> +	usleep_range(10000, 11000);
>> +
>> +	err = mipi_dsi_dcs_enter_sleep_mode(tdo_tl070wsh30->link);
>> +	if (err < 0) {
>> +		dev_err(panel->dev, "failed to enter sleep mode: %d\n", err);
>> +		return err;
>> +	}
>> +
>> +	usleep_range(10000, 11000);
>> +
>> +	tdo_tl070wsh30->prepared = false;
>> +
>> +	return 0;
>> +}
>> +
>> +static int tdo_tl070wsh30_panel_prepare(struct drm_panel *panel)
>> +{
>> +	struct tdo_tl070wsh30_panel *tdo_tl070wsh30 = to_tdo_tl070wsh30_panel(panel);
>> +	int err;
>> +
>> +	if (tdo_tl070wsh30->prepared)
>> +		return 0;
>> +
>> +	err = mipi_dsi_dcs_exit_sleep_mode(tdo_tl070wsh30->link);
>> +	if (err < 0) {
>> +		dev_err(panel->dev, "failed to exit sleep mode: %d\n", err);
>> +		return err;
>> +	}
>> +
>> +	msleep(200);
>> +
>> +	err = mipi_dsi_dcs_set_display_on(tdo_tl070wsh30->link);
>> +	if (err < 0) {
>> +		dev_err(panel->dev, "failed to set display on: %d\n", err);
>> +		return err;
>> +	}
>> +
>> +	msleep(20);
>> +
>> +	tdo_tl070wsh30->prepared = true;
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct drm_display_mode default_mode = {
>> +	.clock = 47250,
>> +	.hdisplay = 1024,
>> +	.hsync_start = 1024 + 46,
>> +	.hsync_end = 1024 + 46 + 80,
>> +	.htotal = 1024 + 46 + 80 + 100,
>> +	.vdisplay = 600,
>> +	.vsync_start = 600 + 5,
>> +	.vsync_end = 600 + 5 + 5,
>> +	.vtotal = 600 + 5 + 5 + 20,
>> +	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
>> +};
>> +
>> +static int tdo_tl070wsh30_panel_get_modes(struct drm_panel *panel,
>> +				       struct drm_connector *connector)
>> +{
>> +	struct drm_display_mode *mode;
>> +
>> +	mode = drm_mode_duplicate(connector->dev, &default_mode);
>> +	if (!mode) {
>> +		dev_err(panel->dev, "failed to add mode %ux%ux\n", default_mode.hdisplay,
>> +			default_mode.vdisplay);
> Here we often print the refresh rate too.
> If there is no need for the refresh rate than at least drop the extra
> 'x' at the end of the line.

I forgot to remove it after vrefresh removal, but I'll prefer adding back
drm_mode_vrefresh() and the refresh.

> 
>> +		return -ENOMEM;
>> +	}
>> +
>> +	drm_mode_set_name(mode);
>> +
>> +	drm_mode_probed_add(connector, mode);
>> +
>> +	connector->display_info.width_mm = 154;
>> +	connector->display_info.height_mm = 85;
>> +	connector->display_info.bpc = 8;
>> +
>> +	return 1;
>> +}
>> +
>> +static const struct drm_panel_funcs tdo_tl070wsh30_panel_funcs = {
>> +	.unprepare = tdo_tl070wsh30_panel_unprepare,
>> +	.prepare = tdo_tl070wsh30_panel_prepare,
>> +	.get_modes = tdo_tl070wsh30_panel_get_modes,
>> +};
>> +
>> +static const struct of_device_id tdo_tl070wsh30_of_match[] = {
>> +	{ .compatible = "tdo,tl070wsh30", },
>> +	{ }
> I often recommends
> 	{ /* sentinel },
> 
> but thats just to be consistent with what I see in other drivers.

Let it be consistent.

> 
>> +};
>> +MODULE_DEVICE_TABLE(of, tdo_tl070wsh30_of_match);
>> +
>> +static int tdo_tl070wsh30_panel_add(struct tdo_tl070wsh30_panel *tdo_tl070wsh30)
>> +{
>> +	struct device *dev = &tdo_tl070wsh30->link->dev;
>> +	int err;
>> +
>> +	tdo_tl070wsh30->supply = devm_regulator_get(dev, "power");
>> +	if (IS_ERR(tdo_tl070wsh30->supply))
>> +		return PTR_ERR(tdo_tl070wsh30->supply);
>> +
>> +	tdo_tl070wsh30->reset_gpio = devm_gpiod_get(dev, "reset",
>> +						  GPIOD_OUT_LOW);
>> +	if (IS_ERR(tdo_tl070wsh30->reset_gpio)) {
>> +		err = PTR_ERR(tdo_tl070wsh30->reset_gpio);
>> +		dev_dbg(dev, "failed to get reset gpio: %d\n", err);
>> +		return err;
>> +	}
>> +
>> +	drm_panel_init(&tdo_tl070wsh30->base, &tdo_tl070wsh30->link->dev,
>> +		       &tdo_tl070wsh30_panel_funcs, DRM_MODE_CONNECTOR_DSI);
>> +
>> +	err = drm_panel_of_backlight(&tdo_tl070wsh30->base);
>> +	if (err)
>> +		return err;
> 
> 
> 
>> +
>> +	err = regulator_enable(tdo_tl070wsh30->supply);
>> +	if (err < 0)
>> +		return err;
>> +
>> +	usleep_range(10000, 11000);
>> +
>> +	gpiod_set_value_cansleep(tdo_tl070wsh30->reset_gpio, 1);
>> +
>> +	usleep_range(10000, 11000);
>> +
>> +	gpiod_set_value_cansleep(tdo_tl070wsh30->reset_gpio, 0);
>> +
>> +	msleep(200);
>> +
> 
> It is the job of the prepare function to turn on the panel,
> and likewise the unprepare to turn off the panel.
> Please move the code above to the prepare function.

Moved

> 
> 
>> +	drm_panel_add(&tdo_tl070wsh30->base);
>> +
>> +	return 0;
>> +}
>> +
>> +static void tdo_tl070wsh30_panel_del(struct tdo_tl070wsh30_panel *tdo_tl070wsh30)
>> +{
>> +	drm_panel_remove(&tdo_tl070wsh30->base);
>> +}
> This helper does not gain anything - call drm_panel_remove() direct.

Removed

> 
>> +
>> +static int tdo_tl070wsh30_panel_probe(struct mipi_dsi_device *dsi)
>> +{
>> +	struct tdo_tl070wsh30_panel *tdo_tl070wsh30;
>> +	int err;
>> +
>> +	dsi->lanes = 4;
>> +	dsi->format = MIPI_DSI_FMT_RGB888;
>> +	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_LPM;
>> +
>> +	tdo_tl070wsh30 = devm_kzalloc(&dsi->dev, sizeof(*tdo_tl070wsh30),
>> +				    GFP_KERNEL);
>> +	if (!tdo_tl070wsh30)
>> +		return -ENOMEM;
>> +
>> +	mipi_dsi_set_drvdata(dsi, tdo_tl070wsh30);
>> +	tdo_tl070wsh30->link = dsi;
>> +
>> +	err = tdo_tl070wsh30_panel_add(tdo_tl070wsh30);
>> +	if (err < 0)
>> +		return err;
>> +
>> +	return mipi_dsi_attach(dsi);
>> +}
>> +
>> +static int tdo_tl070wsh30_panel_remove(struct mipi_dsi_device *dsi)
>> +{
>> +	struct tdo_tl070wsh30_panel *tdo_tl070wsh30 = mipi_dsi_get_drvdata(dsi);
>> +	int err;
>> +
>> +	err = drm_panel_unprepare(&tdo_tl070wsh30->base);
>> +	if (err < 0)
>> +		dev_err(&dsi->dev, "failed to unprepare panel: %d\n", err);
>> +
>> +	err = drm_panel_disable(&tdo_tl070wsh30->base);
>> +	if (err < 0)
>> +		dev_err(&dsi->dev, "failed to disable panel: %d\n", err);
>> +
> In most panel drivers we just ignore the return results here.

Ok

> 
>> +	err = mipi_dsi_detach(dsi);
>> +	if (err < 0)
>> +		dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err);
>> +
>> +	tdo_tl070wsh30_panel_del(tdo_tl070wsh30);
>> +
>> +	return 0;
>> +}
>> +
>> +static void tdo_tl070wsh30_panel_shutdown(struct mipi_dsi_device *dsi)
>> +{
>> +	struct tdo_tl070wsh30_panel *tdo_tl070wsh30 = mipi_dsi_get_drvdata(dsi);
>> +
>> +	drm_panel_unprepare(&tdo_tl070wsh30->base);
>> +	drm_panel_disable(&tdo_tl070wsh30->base);
> This is the wrong order. disable before unpreapre.
> 
> 
> I am not sure what is right here - but I see some drivers that only have
> the disable() + unprepare() in their shutdown() method and then the
> remocal in their remove() function.
> That makes sense with this split but I have not looked too deep into it.

No prob, I aligned with panel-simple here.

> 
>> +}
>> +
>> +static struct mipi_dsi_driver tdo_tl070wsh30_panel_driver = {
>> +	.driver = {
>> +		.name = "panel-tdo-tl070wsh30",
>> +		.of_match_table = tdo_tl070wsh30_of_match,
>> +	},
>> +	.probe = tdo_tl070wsh30_panel_probe,
>> +	.remove = tdo_tl070wsh30_panel_remove,
>> +	.shutdown = tdo_tl070wsh30_panel_shutdown,
>> +};
>> +module_mipi_dsi_driver(tdo_tl070wsh30_panel_driver);
>> +
>> +MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
>> +MODULE_DESCRIPTION("TDO TL070WSH30 panel driver");
>> +MODULE_LICENSE("GPL v2");
>> -- 
>> 2.22.0
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel

Thanks,
Neil
diff mbox series

Patch

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 8d97d07c5871..2d488a875b99 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -433,6 +433,17 @@  config DRM_PANEL_SONY_ACX565AKM
 	  Say Y here if you want to enable support for the Sony ACX565AKM
 	  800x600 3.5" panel (found on the Nokia N900).
 
+config DRM_PANEL_TDO_TL070WSH30
+	tristate "TDO TL070WSH30 DSI panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
+	  panel module. The panel has a 1024×600 resolution and uses
+	  24 bit RGB per pixel. It provides a MIPI DSI interface to
+	  the host, a built-in LED backlight and touch controller.
+
 config DRM_PANEL_TPO_TD028TTEC1
 	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
 	depends on OF && SPI
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 15a4e7752951..35ee06a1b5c2 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -45,6 +45,7 @@  obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
 obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
 obj-$(CONFIG_DRM_PANEL_SONY_ACX424AKP) += panel-sony-acx424akp.o
 obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
+obj-$(CONFIG_DRM_PANEL_TDO_TL070WSH30) += panel-tdo-tl070wsh30.o
 obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
 obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
 obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
diff --git a/drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c b/drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c
new file mode 100644
index 000000000000..c7a6c2c42c52
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c
@@ -0,0 +1,256 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_device.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+struct tdo_tl070wsh30_panel {
+	struct drm_panel base;
+	struct mipi_dsi_device *link;
+
+	struct regulator *supply;
+	struct gpio_desc *reset_gpio;
+
+	bool prepared;
+};
+
+static inline
+struct tdo_tl070wsh30_panel *to_tdo_tl070wsh30_panel(struct drm_panel *panel)
+{
+	return container_of(panel, struct tdo_tl070wsh30_panel, base);
+}
+
+static int tdo_tl070wsh30_panel_unprepare(struct drm_panel *panel)
+{
+	struct tdo_tl070wsh30_panel *tdo_tl070wsh30 = to_tdo_tl070wsh30_panel(panel);
+	int err;
+
+	if (!tdo_tl070wsh30->prepared)
+		return 0;
+
+	err = mipi_dsi_dcs_set_display_off(tdo_tl070wsh30->link);
+	if (err < 0)
+		dev_err(panel->dev, "failed to set display off: %d\n", err);
+
+	usleep_range(10000, 11000);
+
+	err = mipi_dsi_dcs_enter_sleep_mode(tdo_tl070wsh30->link);
+	if (err < 0) {
+		dev_err(panel->dev, "failed to enter sleep mode: %d\n", err);
+		return err;
+	}
+
+	usleep_range(10000, 11000);
+
+	tdo_tl070wsh30->prepared = false;
+
+	return 0;
+}
+
+static int tdo_tl070wsh30_panel_prepare(struct drm_panel *panel)
+{
+	struct tdo_tl070wsh30_panel *tdo_tl070wsh30 = to_tdo_tl070wsh30_panel(panel);
+	int err;
+
+	if (tdo_tl070wsh30->prepared)
+		return 0;
+
+	err = mipi_dsi_dcs_exit_sleep_mode(tdo_tl070wsh30->link);
+	if (err < 0) {
+		dev_err(panel->dev, "failed to exit sleep mode: %d\n", err);
+		return err;
+	}
+
+	msleep(200);
+
+	err = mipi_dsi_dcs_set_display_on(tdo_tl070wsh30->link);
+	if (err < 0) {
+		dev_err(panel->dev, "failed to set display on: %d\n", err);
+		return err;
+	}
+
+	msleep(20);
+
+	tdo_tl070wsh30->prepared = true;
+
+	return 0;
+}
+
+static const struct drm_display_mode default_mode = {
+	.clock = 47250,
+	.hdisplay = 1024,
+	.hsync_start = 1024 + 46,
+	.hsync_end = 1024 + 46 + 80,
+	.htotal = 1024 + 46 + 80 + 100,
+	.vdisplay = 600,
+	.vsync_start = 600 + 5,
+	.vsync_end = 600 + 5 + 5,
+	.vtotal = 600 + 5 + 5 + 20,
+	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
+};
+
+static int tdo_tl070wsh30_panel_get_modes(struct drm_panel *panel,
+				       struct drm_connector *connector)
+{
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, &default_mode);
+	if (!mode) {
+		dev_err(panel->dev, "failed to add mode %ux%ux\n", default_mode.hdisplay,
+			default_mode.vdisplay);
+		return -ENOMEM;
+	}
+
+	drm_mode_set_name(mode);
+
+	drm_mode_probed_add(connector, mode);
+
+	connector->display_info.width_mm = 154;
+	connector->display_info.height_mm = 85;
+	connector->display_info.bpc = 8;
+
+	return 1;
+}
+
+static const struct drm_panel_funcs tdo_tl070wsh30_panel_funcs = {
+	.unprepare = tdo_tl070wsh30_panel_unprepare,
+	.prepare = tdo_tl070wsh30_panel_prepare,
+	.get_modes = tdo_tl070wsh30_panel_get_modes,
+};
+
+static const struct of_device_id tdo_tl070wsh30_of_match[] = {
+	{ .compatible = "tdo,tl070wsh30", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, tdo_tl070wsh30_of_match);
+
+static int tdo_tl070wsh30_panel_add(struct tdo_tl070wsh30_panel *tdo_tl070wsh30)
+{
+	struct device *dev = &tdo_tl070wsh30->link->dev;
+	int err;
+
+	tdo_tl070wsh30->supply = devm_regulator_get(dev, "power");
+	if (IS_ERR(tdo_tl070wsh30->supply))
+		return PTR_ERR(tdo_tl070wsh30->supply);
+
+	tdo_tl070wsh30->reset_gpio = devm_gpiod_get(dev, "reset",
+						  GPIOD_OUT_LOW);
+	if (IS_ERR(tdo_tl070wsh30->reset_gpio)) {
+		err = PTR_ERR(tdo_tl070wsh30->reset_gpio);
+		dev_dbg(dev, "failed to get reset gpio: %d\n", err);
+		return err;
+	}
+
+	drm_panel_init(&tdo_tl070wsh30->base, &tdo_tl070wsh30->link->dev,
+		       &tdo_tl070wsh30_panel_funcs, DRM_MODE_CONNECTOR_DSI);
+
+	err = drm_panel_of_backlight(&tdo_tl070wsh30->base);
+	if (err)
+		return err;
+
+	err = regulator_enable(tdo_tl070wsh30->supply);
+	if (err < 0)
+		return err;
+
+	usleep_range(10000, 11000);
+
+	gpiod_set_value_cansleep(tdo_tl070wsh30->reset_gpio, 1);
+
+	usleep_range(10000, 11000);
+
+	gpiod_set_value_cansleep(tdo_tl070wsh30->reset_gpio, 0);
+
+	msleep(200);
+
+	drm_panel_add(&tdo_tl070wsh30->base);
+
+	return 0;
+}
+
+static void tdo_tl070wsh30_panel_del(struct tdo_tl070wsh30_panel *tdo_tl070wsh30)
+{
+	drm_panel_remove(&tdo_tl070wsh30->base);
+}
+
+static int tdo_tl070wsh30_panel_probe(struct mipi_dsi_device *dsi)
+{
+	struct tdo_tl070wsh30_panel *tdo_tl070wsh30;
+	int err;
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_LPM;
+
+	tdo_tl070wsh30 = devm_kzalloc(&dsi->dev, sizeof(*tdo_tl070wsh30),
+				    GFP_KERNEL);
+	if (!tdo_tl070wsh30)
+		return -ENOMEM;
+
+	mipi_dsi_set_drvdata(dsi, tdo_tl070wsh30);
+	tdo_tl070wsh30->link = dsi;
+
+	err = tdo_tl070wsh30_panel_add(tdo_tl070wsh30);
+	if (err < 0)
+		return err;
+
+	return mipi_dsi_attach(dsi);
+}
+
+static int tdo_tl070wsh30_panel_remove(struct mipi_dsi_device *dsi)
+{
+	struct tdo_tl070wsh30_panel *tdo_tl070wsh30 = mipi_dsi_get_drvdata(dsi);
+	int err;
+
+	err = drm_panel_unprepare(&tdo_tl070wsh30->base);
+	if (err < 0)
+		dev_err(&dsi->dev, "failed to unprepare panel: %d\n", err);
+
+	err = drm_panel_disable(&tdo_tl070wsh30->base);
+	if (err < 0)
+		dev_err(&dsi->dev, "failed to disable panel: %d\n", err);
+
+	err = mipi_dsi_detach(dsi);
+	if (err < 0)
+		dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err);
+
+	tdo_tl070wsh30_panel_del(tdo_tl070wsh30);
+
+	return 0;
+}
+
+static void tdo_tl070wsh30_panel_shutdown(struct mipi_dsi_device *dsi)
+{
+	struct tdo_tl070wsh30_panel *tdo_tl070wsh30 = mipi_dsi_get_drvdata(dsi);
+
+	drm_panel_unprepare(&tdo_tl070wsh30->base);
+	drm_panel_disable(&tdo_tl070wsh30->base);
+}
+
+static struct mipi_dsi_driver tdo_tl070wsh30_panel_driver = {
+	.driver = {
+		.name = "panel-tdo-tl070wsh30",
+		.of_match_table = tdo_tl070wsh30_of_match,
+	},
+	.probe = tdo_tl070wsh30_panel_probe,
+	.remove = tdo_tl070wsh30_panel_remove,
+	.shutdown = tdo_tl070wsh30_panel_shutdown,
+};
+module_mipi_dsi_driver(tdo_tl070wsh30_panel_driver);
+
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION("TDO TL070WSH30 panel driver");
+MODULE_LICENSE("GPL v2");