diff mbox series

[v3,4/4] drm/ast: Enable CRTC before planes

Message ID 20200914072236.19398-5-tzimmermann@suse.de (mailing list archive)
State New, archived
Headers show
Series drm/ast: Disable HW cursor when switching modes | expand

Commit Message

Thomas Zimmermann Sept. 14, 2020, 7:22 a.m. UTC 
An active cursor plane requires a valid display mode. Change the
commit_tail callback, so that it sets up the CRTC's mode before
updating planes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
---
 drivers/gpu/drm/ast/ast_mode.c | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
index fd0127f48fb9..834a156e3a75 100644
--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@@ -1068,6 +1068,11 @@  static int ast_connector_init(struct drm_device *dev)
  * Mode config
  */
 
+static const struct drm_mode_config_helper_funcs
+ast_mode_config_helper_funcs = {
+	.atomic_commit_tail = drm_atomic_helper_commit_tail_rpm,
+};
+
 static const struct drm_mode_config_funcs ast_mode_config_funcs = {
 	.fb_create = drm_gem_fb_create,
 	.mode_valid = drm_vram_helper_mode_valid,
@@ -1107,6 +1112,8 @@  int ast_mode_config_init(struct ast_private *ast)
 		dev->mode_config.max_height = 1200;
 	}
 
+	dev->mode_config.helper_private = &ast_mode_config_helper_funcs;
+
 	memset(&ast->primary_plane, 0, sizeof(ast->primary_plane));
 	ret = drm_universal_plane_init(dev, &ast->primary_plane, 0x01,
 				       &ast_primary_plane_funcs,