diff mbox series

[RFC,v2,6/8] drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)

Message ID 20200916171855.129511-7-lyude@redhat.com
State New, archived
Headers show
Series drm/i915: Add support for Intel's eDP backlight controls | expand

Commit Message

Lyude Paul Sept. 16, 2020, 5:18 p.m. UTC
So-recently a bunch of laptops on the market have started using DPCD
backlight controls instead of the traditional DDI backlight controls.
Originally we thought we had this handled by adding VESA backlight
control support to i915, but the story ended up being a lot more
complicated then that.

Simply put-there's two main backlight interfaces Intel can see in the
wild. Intel's proprietary HDR backlight interface, and the standard VESA
backlight interface. Note that many panels have been observed to report
support for both backlight interfaces, but testing has shown far more
panels work with the Intel HDR backlight interface at the moment.
Additionally, the VBT appears to be capable of reporting support for the
VESA backlight interface but not the Intel HDR interface which needs to
be probed by setting the right magic OUI.

On top of that however, there's also actually two different variants of
the Intel HDR backlight interface. The first uses the AUX channel for
controlling the brightness of the screen in both SDR and HDR mode, and
the second only uses the AUX channel for setting the brightness level in
HDR mode - relying on PWM for setting the brightness level in SDR mode.

For the time being we've been using EDIDs to maintain a list of quirks
for panels that safely do support the VESA backlight interface. Adding
support for Intel's HDR backlight interface in addition however, should
finally allow us to auto-detect eDP backlight controls properly so long
as we probe like so:

* If the panel's VBT reports VESA backlight support, assume it really
  does support it
* If the panel's VBT reports DDI backlight controls:
  * First probe for Intel's HDR backlight interface
  * If that fails, probe for VESA's backlight interface
  * If that fails, assume no DPCD backlight control
* If the panel's VBT reports any other backlight type: just assume it
  doesn't have DPCD backlight controls

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: thaytan@noraisin.net
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
---
 .../drm/i915/display/intel_display_types.h    |   9 +-
 .../drm/i915/display/intel_dp_aux_backlight.c | 253 ++++++++++++++++--
 drivers/gpu/drm/i915/display/intel_panel.c    |  34 ++-
 drivers/gpu/drm/i915/display/intel_panel.h    |   4 +
 4 files changed, 268 insertions(+), 32 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 52a6543df842a..9d540368bac89 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -230,7 +230,14 @@  struct intel_panel {
 		struct pwm_state pwm_state;
 
 		/* DPCD backlight */
-		u8 pwmgen_bit_count;
+		union {
+			struct {
+				u8 pwmgen_bit_count;
+			} vesa;
+			struct {
+				bool sdr_uses_aux;
+			} intel;
+		} edp;
 
 		struct {
 			int (*setup)(struct intel_connector *connector, enum pipe pipe);
diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
index c1e8e8b166267..376419ea3ae52 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
@@ -22,8 +22,26 @@ 
  *
  */
 
+/*
+ * Laptops with Intel GPUs which have panels that support controlling the
+ * backlight through DP AUX can actually use two different interfaces: Intel's
+ * proprietary DP AUX backlight interface, and the standard VESA backlight
+ * interface. Unfortunately, at the time of writing this a lot of laptops will
+ * advertise support for the standard VESA backlight interface when they
+ * don't properly support it. However, on these systems the Intel backlight
+ * interface generally does work properly. Additionally, these systems will
+ * usually just indicate that they use PWM backlight controls in their VBIOS
+ * for some reason.
+ */
+
 #include "intel_display_types.h"
 #include "intel_dp_aux_backlight.h"
+#include "intel_panel.h"
+
+/* TODO:
+ * Implement HDR, right now we just implement the bare minimum to bring us back into SDR mode so we
+ * can make people's backlights work in the mean time
+ */
 
 /*
  * DP AUX registers for Intel's proprietary HDR backlight interface. We define
@@ -77,6 +95,176 @@ 
 
 #define INTEL_EDP_BRIGHTNESS_OPTIMIZATION_1                            0x359
 
+/* Intel EDP backlight callbacks */
+static bool
+intel_dp_aux_supports_hdr_backlight(struct intel_connector *connector)
+{
+	struct drm_device *dev = connector->base.dev;
+	struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder);
+	struct drm_dp_aux *aux = &intel_dp->aux;
+	struct intel_panel *panel = &connector->panel;
+	int ret;
+	u8 tcon_cap[4];
+
+	ret = drm_dp_dpcd_read(aux, INTEL_EDP_HDR_TCON_CAP0, tcon_cap, sizeof(tcon_cap));
+	if (ret < 0)
+		return false;
+
+	if (!(tcon_cap[1] & INTEL_EDP_HDR_TCON_BRIGHTNESS_NITS_CAP))
+		return false;
+
+	if (tcon_cap[0] >= 1) {
+		drm_dbg_kms(dev, "Detected Intel HDR backlight interface version %d\n",
+			    tcon_cap[0]);
+	} else {
+		drm_dbg_kms(dev, "Detected unsupported HDR backlight interface version %d\n",
+			    tcon_cap[0]);
+		return false;
+	}
+
+	panel->backlight.edp.intel.sdr_uses_aux =
+		tcon_cap[2] & INTEL_EDP_SDR_TCON_BRIGHTNESS_AUX_CAP;
+
+	return true;
+}
+
+static u32
+intel_dp_aux_hdr_get_backlight(struct intel_connector *connector)
+{
+	struct drm_device *dev = connector->base.dev;
+	struct intel_panel *panel = &connector->panel;
+	struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder);
+	u8 tmp;
+	u8 buf[2] = { 0 };
+
+	if (drm_dp_dpcd_readb(&intel_dp->aux, INTEL_EDP_HDR_GETSET_CTRL_PARAMS, &tmp) < 0)
+		drm_err(dev, "Failed to read current backlight mode from DPCD\n");
+
+	if (!(tmp & INTEL_EDP_HDR_TCON_BRIGHTNESS_AUX_ENABLE)) {
+		if (panel->backlight.edp.intel.sdr_uses_aux) {
+			/* Assume 100% brightness if backlight controls aren't enabled yet */
+			return panel->backlight.max;
+		} else {
+			u32 pwm_level = panel->backlight.pwm_funcs.get(connector);
+
+			return intel_panel_backlight_level_from_pwm(connector, pwm_level);
+		}
+	}
+
+	if (drm_dp_dpcd_read(&intel_dp->aux, INTEL_EDP_BRIGHTNESS_NITS_LSB, buf, sizeof(buf)) < 0) {
+		drm_err(dev, "Failed to read brightness from DPCD\n");
+		return 0;
+	}
+
+	return (buf[1] << 8 | buf[0]);
+}
+
+static void
+intel_dp_aux_hdr_set_aux_backlight(const struct drm_connector_state *conn_state, u32 level)
+{
+	struct intel_connector *connector = to_intel_connector(conn_state->connector);
+	struct drm_device *dev = connector->base.dev;
+	struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder);
+	uint8_t buf[4] = { 0 };
+
+	buf[0] = level & 0xFF;
+	buf[1] = (level & 0xFF00) >> 8;
+
+	if (drm_dp_dpcd_write(&intel_dp->aux, INTEL_EDP_BRIGHTNESS_NITS_LSB, buf, 4) < 0)
+		drm_err(dev, "Failed to write brightness level to DPCD\n");
+}
+
+static void
+intel_dp_aux_hdr_set_backlight(const struct drm_connector_state *conn_state, u32 level)
+{
+	struct intel_connector *connector = to_intel_connector(conn_state->connector);
+	struct intel_panel *panel = &connector->panel;
+
+	if (panel->backlight.edp.intel.sdr_uses_aux) {
+		intel_dp_aux_hdr_set_aux_backlight(conn_state, level);
+	} else {
+		const u32 pwm_level = intel_panel_backlight_level_to_pwm(connector, level);
+		intel_panel_set_pwm_level(conn_state, pwm_level);
+	}
+}
+
+static void
+intel_dp_aux_hdr_enable_backlight(const struct intel_crtc_state *crtc_state,
+				  const struct drm_connector_state *conn_state)
+{
+	struct intel_connector *connector = to_intel_connector(conn_state->connector);
+	struct intel_panel *panel = &connector->panel;
+	struct drm_device *dev = connector->base.dev;
+	struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder);
+	int ret;
+	u8 old_ctrl, ctrl;
+
+	ret = drm_dp_dpcd_readb(&intel_dp->aux, INTEL_EDP_HDR_GETSET_CTRL_PARAMS, &old_ctrl);
+	if (ret < 0) {
+		drm_err(dev, "Failed to read current backlight control mode: %d\n", ret);
+		return;
+	}
+
+	ctrl = old_ctrl;
+	if (panel->backlight.edp.intel.sdr_uses_aux) {
+		ctrl |= INTEL_EDP_HDR_TCON_BRIGHTNESS_AUX_ENABLE;
+		intel_dp_aux_hdr_set_aux_backlight(conn_state, panel->backlight.level);
+	} else {
+		u32 pwm_level = intel_panel_backlight_level_to_pwm(connector,
+								   panel->backlight.level);
+		panel->backlight.pwm_funcs.enable(crtc_state, conn_state, pwm_level);
+
+		ctrl &= ~(INTEL_EDP_HDR_TCON_BRIGHTNESS_AUX_ENABLE);
+	}
+
+	if (ctrl != old_ctrl)
+		if (drm_dp_dpcd_writeb(&intel_dp->aux, INTEL_EDP_HDR_GETSET_CTRL_PARAMS, ctrl) < 0)
+			drm_err(dev, "Failed to configure DPCD brightness controls\n");
+}
+
+static void
+intel_dp_aux_hdr_disable_backlight(const struct drm_connector_state *conn_state)
+{
+	struct intel_connector *connector = to_intel_connector(conn_state->connector);
+	struct intel_panel *panel = &connector->panel;
+
+	/* Nothing to do for AUX based backlight controls */
+	if (panel->backlight.edp.intel.sdr_uses_aux)
+		return;
+
+	/* Note we want the actual pwm_level to be 0, regardless of pwm_min */
+	panel->backlight.pwm_funcs.disable(conn_state,
+					   intel_panel_sanitize_pwm_level(connector, 0));
+}
+
+static int
+intel_dp_aux_hdr_setup_backlight(struct intel_connector *connector, enum pipe pipe)
+{
+	struct drm_device *dev = connector->base.dev;
+	struct intel_panel *panel = &connector->panel;
+	int ret;
+
+	if (panel->backlight.edp.intel.sdr_uses_aux) {
+		drm_dbg_kms(dev, "SDR backlight is controlled through DPCD\n");
+	} else {
+		drm_dbg_kms(dev, "SDR backlight is controlled through PWM\n");
+
+		ret = panel->backlight.pwm_funcs.setup(connector, pipe);
+		if (ret < 0) {
+			drm_err(dev, "Failed to setup SDR backlight controls through PWM: %d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	panel->backlight.max = 512;
+	panel->backlight.min = 0;
+	panel->backlight.level = intel_dp_aux_hdr_get_backlight(connector);
+	panel->backlight.enabled = panel->backlight.level != 0;
+
+	return 0;
+}
+
 /* VESA backlight callbacks */
 static void set_vesa_backlight_enable(struct intel_dp *intel_dp, bool enable)
 {
@@ -187,7 +375,7 @@  static bool intel_dp_aux_vesa_set_pwm_freq(struct intel_connector *connector)
 {
 	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
 	struct intel_dp *intel_dp = intel_attached_dp(connector);
-	const u8 pn = connector->panel.backlight.pwmgen_bit_count;
+	const u8 pn = connector->panel.backlight.edp.vesa.pwmgen_bit_count;
 	int freq, fxp, f, fxp_actual, fxp_min, fxp_max;
 
 	freq = dev_priv->vbt.backlight.pwm_freq_hz;
@@ -227,6 +415,7 @@  static void intel_dp_aux_vesa_enable_backlight(const struct intel_crtc_state *cr
 	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	struct intel_panel *panel = &connector->panel;
 	u8 dpcd_buf, new_dpcd_buf, edp_backlight_mode;
+	u8 pwmgen_bit_count = panel->backlight.edp.vesa.pwmgen_bit_count;
 
 	if (drm_dp_dpcd_readb(&intel_dp->aux,
 			DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &dpcd_buf) != 1) {
@@ -247,7 +436,7 @@  static void intel_dp_aux_vesa_enable_backlight(const struct intel_crtc_state *cr
 
 		if (drm_dp_dpcd_writeb(&intel_dp->aux,
 				       DP_EDP_PWMGEN_BIT_COUNT,
-				       panel->backlight.pwmgen_bit_count) < 0)
+				       pwmgen_bit_count) < 0)
 			drm_dbg_kms(&i915->drm,
 				    "Failed to write aux pwmgen bit count\n");
 
@@ -355,7 +544,7 @@  static u32 intel_dp_aux_vesa_calc_max_backlight(struct intel_connector *connecto
 			    "Failed to write aux pwmgen bit count\n");
 		return max_backlight;
 	}
-	panel->backlight.pwmgen_bit_count = pn;
+	panel->backlight.edp.vesa.pwmgen_bit_count = pn;
 
 	max_backlight = (1 << pn) - 1;
 
@@ -396,40 +585,46 @@  intel_dp_aux_supports_vesa_backlight(struct intel_connector *connector)
 	return false;
 }
 
-int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector)
+int intel_dp_aux_init_backlight_funcs(struct intel_connector *connector)
 {
-	struct intel_panel *panel = &intel_connector->panel;
-	struct intel_dp *intel_dp = enc_to_intel_dp(intel_connector->encoder);
+	struct drm_device *dev = connector->base.dev;
+	struct intel_panel *panel = &connector->panel;
+	struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder);
 	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 
-	if (i915->params.enable_dpcd_backlight == 0 ||
-	    !intel_dp_aux_supports_vesa_backlight(intel_connector))
+	if (i915->params.enable_dpcd_backlight == 0)
 		return -ENODEV;
 
 	/*
-	 * There are a lot of machines that don't advertise the backlight
-	 * control interface to use properly in their VBIOS, :\
+	 * A lot of eDP panels in the wild will report supporting both the
+	 * Intel proprietary backlight control interface, and the VESA
+	 * backlight control interface. Many of these panels are liars though,
+	 * and will only work with the Intel interface. So, always probe for
+	 * that first.
 	 */
-	if (i915->vbt.backlight.type !=
-	    INTEL_BACKLIGHT_VESA_EDP_AUX_INTERFACE &&
-	    i915->params.enable_dpcd_backlight != 1 &&
-	    !drm_dp_has_quirk(&intel_dp->desc, intel_dp->edid_quirks,
-			      DP_QUIRK_FORCE_DPCD_BACKLIGHT)) {
-		drm_info(&i915->drm,
-			 "Panel advertises DPCD backlight support, but "
-			 "VBT disagrees. If your backlight controls "
-			 "don't work try booting with "
-			 "i915.enable_dpcd_backlight=1. If your machine "
-			 "needs this, please file a _new_ bug report on "
-			 "drm/i915, see " FDO_BUG_URL " for details.\n");
-		return -ENODEV;
+	if (intel_dp_aux_supports_hdr_backlight(connector)) {
+		drm_dbg(dev, "Using Intel proprietary eDP backlight controls\n");
+
+		panel->backlight.setup = intel_dp_aux_hdr_setup_backlight;
+		panel->backlight.enable = intel_dp_aux_hdr_enable_backlight;
+		panel->backlight.disable = intel_dp_aux_hdr_disable_backlight;
+		panel->backlight.set = intel_dp_aux_hdr_set_backlight;
+		panel->backlight.get = intel_dp_aux_hdr_get_backlight;
+
+		return 0;
 	}
 
-	panel->backlight.setup = intel_dp_aux_vesa_setup_backlight;
-	panel->backlight.enable = intel_dp_aux_vesa_enable_backlight;
-	panel->backlight.disable = intel_dp_aux_vesa_disable_backlight;
-	panel->backlight.set = intel_dp_aux_vesa_set_backlight;
-	panel->backlight.get = intel_dp_aux_vesa_get_backlight;
+	if (intel_dp_aux_supports_vesa_backlight(connector)) {
+		drm_dbg(dev, "Using VESA eDP backlight controls\n");
 
-	return 0;
+		panel->backlight.setup = intel_dp_aux_vesa_setup_backlight;
+		panel->backlight.enable = intel_dp_aux_vesa_enable_backlight;
+		panel->backlight.disable = intel_dp_aux_vesa_disable_backlight;
+		panel->backlight.set = intel_dp_aux_vesa_set_backlight;
+		panel->backlight.get = intel_dp_aux_vesa_get_backlight;
+
+		return 0;
+	}
+
+	return -ENODEV;
 }
diff --git a/drivers/gpu/drm/i915/display/intel_panel.c b/drivers/gpu/drm/i915/display/intel_panel.c
index 6d3e9d51d069c..75aca9f2ffeb2 100644
--- a/drivers/gpu/drm/i915/display/intel_panel.c
+++ b/drivers/gpu/drm/i915/display/intel_panel.c
@@ -511,7 +511,7 @@  static u32 scale_hw_to_user(struct intel_connector *connector,
 		     0, user_max);
 }
 
-static u32 intel_panel_sanitize_pwm_level(struct intel_connector *connector, u32 val)
+u32 intel_panel_sanitize_pwm_level(struct intel_connector *connector, u32 val)
 {
 	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
 	struct intel_panel *panel = &connector->panel;
@@ -529,7 +529,7 @@  static u32 intel_panel_sanitize_pwm_level(struct intel_connector *connector, u32
 	return val;
 }
 
-static void intel_panel_set_pwm_level(const struct drm_connector_state *conn_state, u32 val)
+void intel_panel_set_pwm_level(const struct drm_connector_state *conn_state, u32 val)
 {
 	struct intel_connector *connector = to_intel_connector(conn_state->connector);
 	struct drm_i915_private *i915 = to_i915(connector->base.dev);
@@ -539,6 +539,36 @@  static void intel_panel_set_pwm_level(const struct drm_connector_state *conn_sta
 	panel->backlight.pwm_funcs.set(conn_state, val);
 }
 
+u32 intel_panel_backlight_level_to_pwm(struct intel_connector *connector, u32 val)
+{
+	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
+	struct intel_panel *panel = &connector->panel;
+
+	drm_WARN_ON_ONCE(&dev_priv->drm,
+			 panel->backlight.max == 0 || panel->backlight.pwm_max == 0);
+
+	val = scale(val, panel->backlight.min, panel->backlight.max,
+		    panel->backlight.pwm_min, panel->backlight.pwm_max);
+
+	return intel_panel_sanitize_pwm_level(connector, val);
+}
+
+u32 intel_panel_backlight_level_from_pwm(struct intel_connector *connector, u32 val)
+{
+	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
+	struct intel_panel *panel = &connector->panel;
+
+	drm_WARN_ON_ONCE(&dev_priv->drm,
+			 panel->backlight.max == 0 || panel->backlight.pwm_max == 0);
+
+	if (dev_priv->params.invert_brightness > 0 ||
+	    (dev_priv->params.invert_brightness == 0 && dev_priv->quirks & QUIRK_INVERT_BRIGHTNESS))
+		val = panel->backlight.pwm_max - (val - panel->backlight.pwm_min);
+
+	return scale(val, panel->backlight.pwm_min, panel->backlight.pwm_max,
+		     panel->backlight.min, panel->backlight.max);
+}
+
 static u32 lpt_get_backlight(struct intel_connector *connector)
 {
 	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
diff --git a/drivers/gpu/drm/i915/display/intel_panel.h b/drivers/gpu/drm/i915/display/intel_panel.h
index 5b813fe90557c..a548347a975f5 100644
--- a/drivers/gpu/drm/i915/display/intel_panel.h
+++ b/drivers/gpu/drm/i915/display/intel_panel.h
@@ -49,6 +49,10 @@  struct drm_display_mode *
 intel_panel_edid_fixed_mode(struct intel_connector *connector);
 struct drm_display_mode *
 intel_panel_vbt_fixed_mode(struct intel_connector *connector);
+void intel_panel_set_pwm_level(const struct drm_connector_state *conn_state, u32 level);
+u32 intel_panel_sanitize_pwm_level(struct intel_connector *connector, u32 level);
+u32 intel_panel_backlight_level_to_pwm(struct intel_connector *connector, u32 level);
+u32 intel_panel_backlight_level_from_pwm(struct intel_connector *connector, u32 val);
 
 #if IS_ENABLED(CONFIG_BACKLIGHT_CLASS_DEVICE)
 int intel_backlight_device_register(struct intel_connector *connector);