diff mbox series

[v10,09/19] PM / devfreq: tegra30: Support interconnect and OPPs from device-tree

Message ID 20201123002723.28463-10-digetx@gmail.com (mailing list archive)
State New, archived
Headers show
Series Introduce memory interconnect for NVIDIA Tegra SoCs | expand

Commit Message

Dmitry Osipenko Nov. 23, 2020, 12:27 a.m. UTC
This patch moves ACTMON driver away from generating OPP table by itself,
transitioning it to use the table which comes from device-tree. This
change breaks compatibility with older device-trees and brings support
for the interconnect framework to the driver. This is a mandatory change
which needs to be done in order to implement interconnect-based memory
DVFS, i.e. device-trees need to be updated. Now ACTMON issues a memory
bandwidth requests using dev_pm_opp_set_bw() instead of driving EMC clock
rate directly.

Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/devfreq/tegra30-devfreq.c | 79 +++++++++++++++----------------
 1 file changed, 37 insertions(+), 42 deletions(-)

Comments

Chanwoo Choi Nov. 23, 2020, 7:02 a.m. UTC | #1
Hi Dmitry,

On 11/23/20 9:27 AM, Dmitry Osipenko wrote:
> This patch moves ACTMON driver away from generating OPP table by itself,
> transitioning it to use the table which comes from device-tree. This
> change breaks compatibility with older device-trees and brings support
> for the interconnect framework to the driver. This is a mandatory change
> which needs to be done in order to implement interconnect-based memory
> DVFS, i.e. device-trees need to be updated. Now ACTMON issues a memory
> bandwidth requests using dev_pm_opp_set_bw() instead of driving EMC clock
> rate directly.
> 
> Tested-by: Peter Geis <pgwipeout@gmail.com>
> Tested-by: Nicolas Chauvet <kwizart@gmail.com>
> Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
>  drivers/devfreq/tegra30-devfreq.c | 79 +++++++++++++++----------------
>  1 file changed, 37 insertions(+), 42 deletions(-)
> 

(snip)

When the patches related to icc are merged, I'll merge patch9/10.
Thanks for your work.
Dmitry Osipenko Nov. 23, 2020, 12:14 p.m. UTC | #2
23.11.2020 10:02, Chanwoo Choi пишет:
> Hi Dmitry,
> 
> On 11/23/20 9:27 AM, Dmitry Osipenko wrote:
>> This patch moves ACTMON driver away from generating OPP table by itself,
>> transitioning it to use the table which comes from device-tree. This
>> change breaks compatibility with older device-trees and brings support
>> for the interconnect framework to the driver. This is a mandatory change
>> which needs to be done in order to implement interconnect-based memory
>> DVFS, i.e. device-trees need to be updated. Now ACTMON issues a memory
>> bandwidth requests using dev_pm_opp_set_bw() instead of driving EMC clock
>> rate directly.
>>
>> Tested-by: Peter Geis <pgwipeout@gmail.com>
>> Tested-by: Nicolas Chauvet <kwizart@gmail.com>
>> Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
>> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
>> ---
>>  drivers/devfreq/tegra30-devfreq.c | 79 +++++++++++++++----------------
>>  1 file changed, 37 insertions(+), 42 deletions(-)
>>
> 
> (snip)

Hello Chanwoo,

> When the patches related to icc are merged, I'll merge patch9/10.
> Thanks for your work.
> 

Alright, thank you!
diff mbox series

Patch

diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c
index 38cc0d014738..145ef91ae092 100644
--- a/drivers/devfreq/tegra30-devfreq.c
+++ b/drivers/devfreq/tegra30-devfreq.c
@@ -19,6 +19,8 @@ 
 #include <linux/reset.h>
 #include <linux/workqueue.h>
 
+#include <soc/tegra/fuse.h>
+
 #include "governor.h"
 
 #define ACTMON_GLB_STATUS					0x0
@@ -155,6 +157,7 @@  struct tegra_devfreq_device {
 
 struct tegra_devfreq {
 	struct devfreq		*devfreq;
+	struct opp_table	*opp_table;
 
 	struct reset_control	*reset;
 	struct clk		*clock;
@@ -612,34 +615,19 @@  static void tegra_actmon_stop(struct tegra_devfreq *tegra)
 static int tegra_devfreq_target(struct device *dev, unsigned long *freq,
 				u32 flags)
 {
-	struct tegra_devfreq *tegra = dev_get_drvdata(dev);
-	struct devfreq *devfreq = tegra->devfreq;
 	struct dev_pm_opp *opp;
-	unsigned long rate;
-	int err;
+	int ret;
 
 	opp = devfreq_recommended_opp(dev, freq, flags);
 	if (IS_ERR(opp)) {
 		dev_err(dev, "Failed to find opp for %lu Hz\n", *freq);
 		return PTR_ERR(opp);
 	}
-	rate = dev_pm_opp_get_freq(opp);
-	dev_pm_opp_put(opp);
-
-	err = clk_set_min_rate(tegra->emc_clock, rate * KHZ);
-	if (err)
-		return err;
-
-	err = clk_set_rate(tegra->emc_clock, 0);
-	if (err)
-		goto restore_min_rate;
 
-	return 0;
-
-restore_min_rate:
-	clk_set_min_rate(tegra->emc_clock, devfreq->previous_freq);
+	ret = dev_pm_opp_set_bw(dev, opp);
+	dev_pm_opp_put(opp);
 
-	return err;
+	return ret;
 }
 
 static int tegra_devfreq_get_dev_status(struct device *dev,
@@ -655,7 +643,7 @@  static int tegra_devfreq_get_dev_status(struct device *dev,
 	stat->private_data = tegra;
 
 	/* The below are to be used by the other governors */
-	stat->current_frequency = cur_freq;
+	stat->current_frequency = cur_freq * KHZ;
 
 	actmon_dev = &tegra->devices[MCALL];
 
@@ -705,7 +693,12 @@  static int tegra_governor_get_target(struct devfreq *devfreq,
 		target_freq = max(target_freq, dev->target_freq);
 	}
 
-	*freq = target_freq;
+	/*
+	 * tegra-devfreq driver operates with KHz units, while OPP table
+	 * entries use Hz units. Hence we need to convert the units for the
+	 * devfreq core.
+	 */
+	*freq = target_freq * KHZ;
 
 	return 0;
 }
@@ -774,6 +767,7 @@  static struct devfreq_governor tegra_devfreq_governor = {
 
 static int tegra_devfreq_probe(struct platform_device *pdev)
 {
+	u32 hw_version = BIT(tegra_sku_info.soc_speedo_id);
 	struct tegra_devfreq_device *dev;
 	struct tegra_devfreq *tegra;
 	struct devfreq *devfreq;
@@ -822,11 +816,25 @@  static int tegra_devfreq_probe(struct platform_device *pdev)
 		return err;
 	}
 
+	tegra->opp_table = dev_pm_opp_set_supported_hw(&pdev->dev,
+						       &hw_version, 1);
+	err = PTR_ERR_OR_ZERO(tegra->opp_table);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to set supported HW: %d\n", err);
+		return err;
+	}
+
+	err = dev_pm_opp_of_add_table(&pdev->dev);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to add OPP table: %d\n", err);
+		goto put_hw;
+	}
+
 	err = clk_prepare_enable(tegra->clock);
 	if (err) {
 		dev_err(&pdev->dev,
 			"Failed to prepare and enable ACTMON clock\n");
-		return err;
+		goto remove_table;
 	}
 
 	err = reset_control_reset(tegra->reset);
@@ -850,23 +858,6 @@  static int tegra_devfreq_probe(struct platform_device *pdev)
 		dev->regs = tegra->regs + dev->config->offset;
 	}
 
-	for (rate = 0; rate <= tegra->max_freq * KHZ; rate++) {
-		rate = clk_round_rate(tegra->emc_clock, rate);
-
-		if (rate < 0) {
-			dev_err(&pdev->dev,
-				"Failed to round clock rate: %ld\n", rate);
-			err = rate;
-			goto remove_opps;
-		}
-
-		err = dev_pm_opp_add(&pdev->dev, rate / KHZ, 0);
-		if (err) {
-			dev_err(&pdev->dev, "Failed to add OPP: %d\n", err);
-			goto remove_opps;
-		}
-	}
-
 	platform_set_drvdata(pdev, tegra);
 
 	tegra->clk_rate_change_nb.notifier_call = tegra_actmon_clk_notify_cb;
@@ -882,7 +873,6 @@  static int tegra_devfreq_probe(struct platform_device *pdev)
 	}
 
 	tegra_devfreq_profile.initial_freq = clk_get_rate(tegra->emc_clock);
-	tegra_devfreq_profile.initial_freq /= KHZ;
 
 	devfreq = devfreq_add_device(&pdev->dev, &tegra_devfreq_profile,
 				     "tegra_actmon", NULL);
@@ -902,6 +892,10 @@  static int tegra_devfreq_probe(struct platform_device *pdev)
 	reset_control_reset(tegra->reset);
 disable_clk:
 	clk_disable_unprepare(tegra->clock);
+remove_table:
+	dev_pm_opp_of_remove_table(&pdev->dev);
+put_hw:
+	dev_pm_opp_put_supported_hw(tegra->opp_table);
 
 	return err;
 }
@@ -913,11 +907,12 @@  static int tegra_devfreq_remove(struct platform_device *pdev)
 	devfreq_remove_device(tegra->devfreq);
 	devfreq_remove_governor(&tegra_devfreq_governor);
 
-	dev_pm_opp_remove_all_dynamic(&pdev->dev);
-
 	reset_control_reset(tegra->reset);
 	clk_disable_unprepare(tegra->clock);
 
+	dev_pm_opp_of_remove_table(&pdev->dev);
+	dev_pm_opp_put_supported_hw(tegra->opp_table);
+
 	return 0;
 }