@@ -1999,29 +1999,6 @@ static bool hdmi_deep_color_possible(const struct intel_crtc_state *crtc_state,
INTEL_OUTPUT_FORMAT_YCBCR420);
}
-static int
-intel_hdmi_ycbcr420_config(struct intel_crtc_state *crtc_state,
- const struct drm_connector_state *conn_state)
-{
- struct drm_connector *connector = conn_state->connector;
- struct drm_i915_private *i915 = to_i915(connector->dev);
- const struct drm_display_mode *adjusted_mode =
- &crtc_state->hw.adjusted_mode;
-
- if (!drm_mode_is_420_only(&connector->display_info, adjusted_mode))
- return 0;
-
- if (!connector->ycbcr_420_allowed) {
- drm_err(&i915->drm,
- "Platform doesn't support YCBCR420 output\n");
- return -EINVAL;
- }
-
- crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR420;
-
- return intel_pch_panel_fitting(crtc_state, conn_state);
-}
-
static int intel_hdmi_compute_bpc(struct intel_encoder *encoder,
struct intel_crtc_state *crtc_state,
int clock)
@@ -2128,6 +2105,30 @@ static bool intel_hdmi_has_audio(struct intel_encoder *encoder,
return intel_conn_state->force_audio == HDMI_AUDIO_ON;
}
+static int intel_hdmi_compute_output_format(struct intel_encoder *encoder,
+ struct intel_crtc_state *crtc_state,
+ const struct drm_connector_state *conn_state)
+{
+ struct drm_connector *connector = conn_state->connector;
+ struct drm_i915_private *i915 = to_i915(connector->dev);
+ const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode;
+ int ret;
+ bool ycbcr_420_only;
+
+ ycbcr_420_only = drm_mode_is_420_only(&connector->display_info, adjusted_mode);
+ if (connector->ycbcr_420_allowed && ycbcr_420_only)
+ crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR420;
+ else {
+ if (!connector->ycbcr_420_allowed && ycbcr_420_only)
+ drm_err(&i915->drm, "Display only supports YCbCr420 output, but connector does not allow it. Fallback to RGB, but this will likely fail.\n");
+ crtc_state->output_format = INTEL_OUTPUT_FORMAT_RGB;
+ }
+
+ ret = intel_hdmi_compute_clock(encoder, crtc_state);
+
+ return ret;
+}
+
int intel_hdmi_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config,
struct drm_connector_state *conn_state)
@@ -2152,23 +2153,25 @@ int intel_hdmi_compute_config(struct intel_encoder *encoder,
if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
pipe_config->pixel_multiplier = 2;
- ret = intel_hdmi_ycbcr420_config(pipe_config, conn_state);
- if (ret)
- return ret;
-
- pipe_config->limited_color_range =
- intel_hdmi_limited_color_range(pipe_config, conn_state);
-
if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv))
pipe_config->has_pch_encoder = true;
pipe_config->has_audio =
intel_hdmi_has_audio(encoder, pipe_config, conn_state);
- ret = intel_hdmi_compute_clock(encoder, pipe_config);
+ ret = intel_hdmi_compute_output_format(encoder, pipe_config, conn_state);
if (ret)
return ret;
+ if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
+ ret = intel_pch_panel_fitting(pipe_config, conn_state);
+ if (ret)
+ return ret;
+ }
+
+ pipe_config->limited_color_range =
+ intel_hdmi_limited_color_range(pipe_config, conn_state);
+
if (conn_state->picture_aspect_ratio)
adjusted_mode->picture_aspect_ratio =
conn_state->picture_aspect_ratio;
Couples the decission between RGB and YCbCr420 mode and the check if the port clock can archive the required frequency. Other checks and configuration steps that where previously done in between can also be done before or after. This allows for are cleaner implementation of retrying different color encodings. Slight change in behaviour: If YCbCr420 is not allowed but display is YCbCr420 only it no longer fails, but just prints an error and tries to fallback on RGB. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> --- drivers/gpu/drm/i915/display/intel_hdmi.c | 65 ++++++++++++----------- 1 file changed, 34 insertions(+), 31 deletions(-)