| Message ID | 20210507150515.257424-7-maxime@cerno.tech (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/vc4: hdmi: Support the 4k @ 60Hz modes | expand |
On Fri, 7 May 2021 at 16:05, Maxime Ripard <maxime@cerno.tech> wrote: > > Since we fixed the hooks to disable the encoder at boot, we now have an > unbalanced clk_disable call at boot since we never enabled them in the > first place. > > Let's mimic the state of the hardware and enable the clocks at boot if > the controller is enabled to get the use-count right. > > Cc: <stable@vger.kernel.org> # v5.10+ > Fixes: 09c438139b8f ("drm/vc4: hdmi: Implement finer-grained hooks") > Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> > --- > drivers/gpu/drm/vc4/vc4_hdmi.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c > index 1fda574579af..9c919472ae84 100644 > --- a/drivers/gpu/drm/vc4/vc4_hdmi.c > +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c > @@ -1995,6 +1995,14 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data) > if (vc4_hdmi->variant->reset) > vc4_hdmi->variant->reset(vc4_hdmi); > > + if ((of_device_is_compatible(dev->of_node, "brcm,bcm2711-hdmi0") || > + of_device_is_compatible(dev->of_node, "brcm,bcm2711-hdmi1")) && > + HDMI_READ(HDMI_VID_CTL) & VC4_HD_VID_CTL_ENABLE) { > + clk_prepare_enable(vc4_hdmi->pixel_clock); > + clk_prepare_enable(vc4_hdmi->hsm_clock); > + clk_prepare_enable(vc4_hdmi->pixel_bvb_clock); > + } > + > pm_runtime_enable(dev); > > drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS); > -- > 2.31.1 >
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c index 1fda574579af..9c919472ae84 100644 --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c @@ -1995,6 +1995,14 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data) if (vc4_hdmi->variant->reset) vc4_hdmi->variant->reset(vc4_hdmi); + if ((of_device_is_compatible(dev->of_node, "brcm,bcm2711-hdmi0") || + of_device_is_compatible(dev->of_node, "brcm,bcm2711-hdmi1")) && + HDMI_READ(HDMI_VID_CTL) & VC4_HD_VID_CTL_ENABLE) { + clk_prepare_enable(vc4_hdmi->pixel_clock); + clk_prepare_enable(vc4_hdmi->hsm_clock); + clk_prepare_enable(vc4_hdmi->pixel_bvb_clock); + } + pm_runtime_enable(dev); drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
Since we fixed the hooks to disable the encoder at boot, we now have an unbalanced clk_disable call at boot since we never enabled them in the first place. Let's mimic the state of the hardware and enable the clocks at boot if the controller is enabled to get the use-count right. Cc: <stable@vger.kernel.org> # v5.10+ Fixes: 09c438139b8f ("drm/vc4: hdmi: Implement finer-grained hooks") Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- drivers/gpu/drm/vc4/vc4_hdmi.c | 8 ++++++++ 1 file changed, 8 insertions(+)