| Message ID | 20210802074310.1526526-1-lizhenneng@kylinos.cn (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/radeon: Update pitch for page flip | expand |
On Mon, Aug 2, 2021 at 4:31 AM Daniel Vetter <daniel@ffwll.ch> wrote: > > On Mon, Aug 02, 2021 at 10:12:47AM +0200, Christian König wrote: > > Am 02.08.21 um 09:43 schrieb Zhenneng Li: > > > When primary bo is updated, crtc's pitch may > > > have not been updated, this will lead to show > > > disorder content when user changes display mode, > > > we update crtc's pitch in page flip to avoid > > > this bug. > > > This refers to amdgpu's pageflip. > > > > Alex is the expert to ask about that code, but I'm not sure if that is > > really correct for the old hardware. > > > > As far as I know the crtc's pitch should not change during a page flip, but > > only during a full mode set. > > > > So could you elaborate a bit more how you trigger this? > > legacy page_flip ioctl only verifies that the fb->format stays the same. > It doesn't check anything else (afair never has), this is all up to > drivers to verify. > > Personally I'd say add a check to reject this, since testing this and > making sure it really works everywhere is probably a bit much on this old > hw. If just the pitch changed, that probably wouldn't be much of a problem, but if the pitch is changing, that probably implies other stuff has changed as well and we'll just be chasing changes. I agree it would be best to just reject anything other than updating the scanout address. Alex > -Daniel > > > > > Thanks, > > Christian. > > > > > > > > Cc: Alex Deucher <alexander.deucher@amd.com> > > > Cc: "Christian König" <christian.koenig@amd.com> > > > Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> > > > Cc: David Airlie <airlied@linux.ie> > > > Cc: Daniel Vetter <daniel@ffwll.ch> > > > Cc: amd-gfx@lists.freedesktop.org > > > Cc: dri-devel@lists.freedesktop.org > > > Cc: linux-kernel@vger.kernel.org > > > Signed-off-by: Zhenneng Li <lizhenneng@kylinos.cn> > > > --- > > > drivers/gpu/drm/radeon/evergreen.c | 8 +++++++- > > > 1 file changed, 7 insertions(+), 1 deletion(-) > > > > > > diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c > > > index 36a888e1b179..eeb590d2dec2 100644 > > > --- a/drivers/gpu/drm/radeon/evergreen.c > > > +++ b/drivers/gpu/drm/radeon/evergreen.c > > > @@ -28,6 +28,7 @@ > > > #include <drm/drm_vblank.h> > > > #include <drm/radeon_drm.h> > > > +#include <drm/drm_fourcc.h> > > > #include "atom.h" > > > #include "avivod.h" > > > @@ -1414,10 +1415,15 @@ void evergreen_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base, > > > bool async) > > > { > > > struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id]; > > > + struct drm_framebuffer *fb = radeon_crtc->base.primary->fb; > > > - /* update the scanout addresses */ > > > + /* flip at hsync for async, default is vsync */ > > > WREG32(EVERGREEN_GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, > > > async ? EVERGREEN_GRPH_SURFACE_UPDATE_H_RETRACE_EN : 0); > > > + /* update pitch */ > > > + WREG32(EVERGREEN_GRPH_PITCH + radeon_crtc->crtc_offset, > > > + fb->pitches[0] / fb->format->cpp[0]); > > > + /* update the scanout addresses */ > > > WREG32(EVERGREEN_GRPH_PRIMARY_SURFACE_ADDRESS_HIGH + radeon_crtc->crtc_offset, > > > upper_32_bits(crtc_base)); > > > WREG32(EVERGREEN_GRPH_PRIMARY_SURFACE_ADDRESS + radeon_crtc->crtc_offset, > > > > > > No virus found > > > Checked by Hillstone Network AntiVirus > > > > -- > Daniel Vetter > Software Engineer, Intel Corporation > http://blog.ffwll.ch
在 2021/8/2 下午10:51, Alex Deucher 写道: > On Mon, Aug 2, 2021 at 4:31 AM Daniel Vetter <daniel@ffwll.ch> wrote: >> On Mon, Aug 02, 2021 at 10:12:47AM +0200, Christian König wrote: >>> Am 02.08.21 um 09:43 schrieb Zhenneng Li: >>>> When primary bo is updated, crtc's pitch may >>>> have not been updated, this will lead to show >>>> disorder content when user changes display mode, >>>> we update crtc's pitch in page flip to avoid >>>> this bug. >>>> This refers to amdgpu's pageflip. >>> Alex is the expert to ask about that code, but I'm not sure if that is >>> really correct for the old hardware. >>> >>> As far as I know the crtc's pitch should not change during a page flip, but >>> only during a full mode set. >>> >>> So could you elaborate a bit more how you trigger this? >> legacy page_flip ioctl only verifies that the fb->format stays the same. >> It doesn't check anything else (afair never has), this is all up to >> drivers to verify. >> >> Personally I'd say add a check to reject this, since testing this and >> making sure it really works everywhere is probably a bit much on this old >> hw. > If just the pitch changed, that probably wouldn't be much of a > problem, but if the pitch is changing, that probably implies other > stuff has changed as well and we'll just be chasing changes. I agree > it would be best to just reject anything other than updating the > scanout address. Thanks for your reply! In theory , pitch is updated only when the scanout address is updated, but we can trigger this bug on r5230 when using two screens and changing modeset, you can execute shell: #!/bin/bash cnt=0; while [ 1 ] do xrandr --output HDMI-0 --right-of VGA-0 --auto echo "hdmi----vga" sleep 8 xrandr --output VGA-0 --auto --output HDMI-0 --off sleep 3 let cnt+=1; echo $cnt done at the same time, open a new terminal, press F11 to fast switch this window between maximize size and normal size to improve the possibility，attachement picture shows the phenomenon. I add some debug messages: [ 89.065206] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:589, set->crtc->primary->fb: 0xffffffa0e5956100, set->fb: 0xffffffa0e701e400 [ 89.065209] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:601 [ 89.065213] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:713, fb_changed: 1, mode_changed: 0 [ 89.065216] lzn debug, drivers/gpu/drm/radeon/atombios_crtc.c:dce4_crtc_do_set_base:1148, x: 0: y: 0, crtc: 0xffffffa0e62dc000, atomic: 0 [ 89.065222] lzn debug, drivers/gpu/drm/radeon/atombios_crtc.c:dce4_crtc_do_set_base:1426, fb_location: 0x117f2000, target_fb->width: 1920, target_fb->height: 1080 [ 89.065223] lzn debug, drivers/gpu/drm/radeon/atombios_crtc.c:dce4_crtc_do_set_base:1430, fb_pitch_pixels: 1920, target_fb->pitches[0]: 7680, target_fb->format->cpp[0]: 4 [ 89.065240] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:752***************************************************************** [ 92.079288] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:589, set->crtc->primary->fb: 0xffffffa0e701e400, set->fb: 0xffffffa0eafced00 [ 92.079291] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:601 [ 92.079295] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:713, fb_changed: 1, mode_changed: 0 [ 92.079298] lzn debug, drivers/gpu/drm/radeon/atombios_crtc.c:dce4_crtc_do_set_base:1148, x: 0: y: 0, crtc: 0xffffffa0e62dc000, atomic: 0 [ 92.079304] lzn debug, drivers/gpu/drm/radeon/atombios_crtc.c:dce4_crtc_do_set_base:1426, fb_location: 0x10000000, target_fb->width: 3840, target_fb->height: 1080 [ 92.079306] lzn debug, drivers/gpu/drm/radeon/atombios_crtc.c:dce4_crtc_do_set_base:1430, fb_pitch_pixels: 3840, target_fb->pitches[0]: 15360, target_fb->format->cpp[0]: 4 [ 92.079323] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:752***************************************************************** [ 92.080382] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:589, set->crtc->primary->fb: 0x0, set->fb: 0xffffffa0eafced00 [ 92.080384] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:595 [ 92.080387] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:713, fb_changed: 0, mode_changed: 1 [ 92.080389] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:715 [ 92.083143] lzn debug, drivers/gpu/drm/radeon/atombios_crtc.c:dce4_crtc_do_set_base:1148, x: 1920: y: 0, crtc: 0xffffffa0e62db000, atomic: 0 [ 92.083149] lzn debug, drivers/gpu/drm/radeon/atombios_crtc.c:dce4_crtc_do_set_base:1426, fb_location: 0x10000000, target_fb->width: 3840, target_fb->height: 1080 [ 92.083164] lzn debug, drivers/gpu/drm/radeon/atombios_crtc.c:dce4_crtc_do_set_base:1430, fb_pitch_pixels: 3840, target_fb->pitches[0]: 15360, target_fb->format->cpp[0]: 4 [ 92.120595] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:752***************************************************************** [ 100.157744] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:589, set->crtc->primary->fb: 0xffffffa0eafced00, set->fb: 0xffffffa0f3a5bb00 [ 100.157746] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:601 [ 100.157749] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:713, fb_changed: 1, mode_changed: 0 [ 100.157752] lzn debug, drivers/gpu/drm/radeon/atombios_crtc.c:dce4_crtc_do_set_base:1148, x: 0: y: 0, crtc: 0xffffffa0e62dc000, atomic: 0 [ 100.157758] lzn debug, drivers/gpu/drm/radeon/atombios_crtc.c:dce4_crtc_do_set_base:1426, fb_location: 0x1790c000, target_fb->width: 1920, target_fb->height: 1080 [ 100.157760] lzn debug, drivers/gpu/drm/radeon/atombios_crtc.c:dce4_crtc_do_set_base:1430, fb_pitch_pixels: 1920, target_fb->pitches[0]: 7680, target_fb->format->cpp[0]: 4 [ 100.157777] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:752***************************************************************** [ 103.166751] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:589, set->crtc->primary->fb: 0xffffffa0e9a0cd00, set->fb: 0xffffffa0e9a0cd00 [ 103.166757] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:713, fb_changed: 0, mode_changed: 0 [ 103.166758] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:752***************************************************************** [ 103.169353] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:589, set->crtc->primary->fb: 0x0, set->fb: 0xffffffa0e9a0cd00 [ 103.169355] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:595 [ 103.169359] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:713, fb_changed: 0, mode_changed: 1 [ 103.169360] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:715 [ 103.170396] lzn debug, drivers/gpu/drm/radeon/atombios_crtc.c:dce4_crtc_do_set_base:1148, x: 1920: y: 0, crtc: 0xffffffa0e62db000, atomic: 0 [ 103.170403] lzn debug, drivers/gpu/drm/radeon/atombios_crtc.c:dce4_crtc_do_set_base:1426, fb_location: 0x11fea000, target_fb->width: 3840, target_fb->height: 1080 [ 103.170404] lzn debug, drivers/gpu/drm/radeon/atombios_crtc.c:dce4_crtc_do_set_base:1430, fb_pitch_pixels: 3840, target_fb->pitches[0]: 15360, target_fb->format->cpp[0]: 4 [ 103.224592] lzn debug, drivers/gpu/drm/drm_crtc_helper.c:drm_crtc_helper_set_config:752***************************************************************** After 103s of os started, bug is triggerd, fb_changed and mode_changed are zero, and crtc's pitch has not been updated. Amdgpu has the same problem, but amdgpu's page_flip will update pitch, so this bug can't trigger on amdgpu. you can refer to dce_v6_0_page_flip in amdgpu，all amdgpu drivers update pitch in page_flip. test os: focal-desktop-arm64.iso Zhenneng Li > > Alex > >> -Daniel >> >>> Thanks, >>> Christian. >>> >>>> Cc: Alex Deucher <alexander.deucher@amd.com> >>>> Cc: "Christian König" <christian.koenig@amd.com> >>>> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> >>>> Cc: David Airlie <airlied@linux.ie> >>>> Cc: Daniel Vetter <daniel@ffwll.ch> >>>> Cc: amd-gfx@lists.freedesktop.org >>>> Cc: dri-devel@lists.freedesktop.org >>>> Cc: linux-kernel@vger.kernel.org >>>> Signed-off-by: Zhenneng Li <lizhenneng@kylinos.cn> >>>> --- >>>> drivers/gpu/drm/radeon/evergreen.c | 8 +++++++- >>>> 1 file changed, 7 insertions(+), 1 deletion(-) >>>> >>>> diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c >>>> index 36a888e1b179..eeb590d2dec2 100644 >>>> --- a/drivers/gpu/drm/radeon/evergreen.c >>>> +++ b/drivers/gpu/drm/radeon/evergreen.c >>>> @@ -28,6 +28,7 @@ >>>> #include <drm/drm_vblank.h> >>>> #include <drm/radeon_drm.h> >>>> +#include <drm/drm_fourcc.h> >>>> #include "atom.h" >>>> #include "avivod.h" >>>> @@ -1414,10 +1415,15 @@ void evergreen_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base, >>>> bool async) >>>> { >>>> struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id]; >>>> + struct drm_framebuffer *fb = radeon_crtc->base.primary->fb; >>>> - /* update the scanout addresses */ >>>> + /* flip at hsync for async, default is vsync */ >>>> WREG32(EVERGREEN_GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, >>>> async ? EVERGREEN_GRPH_SURFACE_UPDATE_H_RETRACE_EN : 0); >>>> + /* update pitch */ >>>> + WREG32(EVERGREEN_GRPH_PITCH + radeon_crtc->crtc_offset, >>>> + fb->pitches[0] / fb->format->cpp[0]); >>>> + /* update the scanout addresses */ >>>> WREG32(EVERGREEN_GRPH_PRIMARY_SURFACE_ADDRESS_HIGH + radeon_crtc->crtc_offset, >>>> upper_32_bits(crtc_base)); >>>> WREG32(EVERGREEN_GRPH_PRIMARY_SURFACE_ADDRESS + radeon_crtc->crtc_offset, >>>> >>>> No virus found >>>> Checked by Hillstone Network AntiVirus >> -- >> Daniel Vetter >> Software Engineer, Intel Corporation >> http://blog.ffwll.ch
On 2021-08-02 4:51 p.m., Alex Deucher wrote: > On Mon, Aug 2, 2021 at 4:31 AM Daniel Vetter <daniel@ffwll.ch> wrote: >> >> On Mon, Aug 02, 2021 at 10:12:47AM +0200, Christian König wrote: >>> Am 02.08.21 um 09:43 schrieb Zhenneng Li: >>>> When primary bo is updated, crtc's pitch may >>>> have not been updated, this will lead to show >>>> disorder content when user changes display mode, >>>> we update crtc's pitch in page flip to avoid >>>> this bug. >>>> This refers to amdgpu's pageflip. >>> >>> Alex is the expert to ask about that code, but I'm not sure if that is >>> really correct for the old hardware. >>> >>> As far as I know the crtc's pitch should not change during a page flip, but >>> only during a full mode set. >>> >>> So could you elaborate a bit more how you trigger this? >> >> legacy page_flip ioctl only verifies that the fb->format stays the same. >> It doesn't check anything else (afair never has), this is all up to >> drivers to verify. >> >> Personally I'd say add a check to reject this, since testing this and >> making sure it really works everywhere is probably a bit much on this old >> hw. > > If just the pitch changed, that probably wouldn't be much of a > problem, but if the pitch is changing, that probably implies other > stuff has changed as well and we'll just be chasing changes. I agree > it would be best to just reject anything other than updating the > scanout address. FWIW, that means page flipping cannot be used in some cases which work fine by changing the pitch, which can result in tearing: https://gitlab.freedesktop.org/xorg/xserver/-/issues/839 (which says the i915 driver handles this as well).
On Tue, Aug 3, 2021 at 4:34 AM Michel Dänzer <michel@daenzer.net> wrote: > > On 2021-08-02 4:51 p.m., Alex Deucher wrote: > > On Mon, Aug 2, 2021 at 4:31 AM Daniel Vetter <daniel@ffwll.ch> wrote: > >> > >> On Mon, Aug 02, 2021 at 10:12:47AM +0200, Christian König wrote: > >>> Am 02.08.21 um 09:43 schrieb Zhenneng Li: > >>>> When primary bo is updated, crtc's pitch may > >>>> have not been updated, this will lead to show > >>>> disorder content when user changes display mode, > >>>> we update crtc's pitch in page flip to avoid > >>>> this bug. > >>>> This refers to amdgpu's pageflip. > >>> > >>> Alex is the expert to ask about that code, but I'm not sure if that is > >>> really correct for the old hardware. > >>> > >>> As far as I know the crtc's pitch should not change during a page flip, but > >>> only during a full mode set. > >>> > >>> So could you elaborate a bit more how you trigger this? > >> > >> legacy page_flip ioctl only verifies that the fb->format stays the same. > >> It doesn't check anything else (afair never has), this is all up to > >> drivers to verify. > >> > >> Personally I'd say add a check to reject this, since testing this and > >> making sure it really works everywhere is probably a bit much on this old > >> hw. > > > > If just the pitch changed, that probably wouldn't be much of a > > problem, but if the pitch is changing, that probably implies other > > stuff has changed as well and we'll just be chasing changes. I agree > > it would be best to just reject anything other than updating the > > scanout address. > > FWIW, that means page flipping cannot be used in some cases which work fine by changing the pitch, which can result in tearing: https://gitlab.freedesktop.org/xorg/xserver/-/issues/839 (which says the i915 driver handles this as well). > Ok. In that case, @Zhenneng can you update all of the pitch in all of the page_flip functions in radeon rather than just the evergreen one? Thanks, Alex > > -- > Earthling Michel Dänzer | https://redhat.com > Libre software enthusiast | Mesa and X developer
On Tue, Aug 03, 2021 at 10:49:39AM -0400, Alex Deucher wrote: > On Tue, Aug 3, 2021 at 4:34 AM Michel Dänzer <michel@daenzer.net> wrote: > > > > On 2021-08-02 4:51 p.m., Alex Deucher wrote: > > > On Mon, Aug 2, 2021 at 4:31 AM Daniel Vetter <daniel@ffwll.ch> wrote: > > >> > > >> On Mon, Aug 02, 2021 at 10:12:47AM +0200, Christian König wrote: > > >>> Am 02.08.21 um 09:43 schrieb Zhenneng Li: > > >>>> When primary bo is updated, crtc's pitch may > > >>>> have not been updated, this will lead to show > > >>>> disorder content when user changes display mode, > > >>>> we update crtc's pitch in page flip to avoid > > >>>> this bug. > > >>>> This refers to amdgpu's pageflip. > > >>> > > >>> Alex is the expert to ask about that code, but I'm not sure if that is > > >>> really correct for the old hardware. > > >>> > > >>> As far as I know the crtc's pitch should not change during a page flip, but > > >>> only during a full mode set. > > >>> > > >>> So could you elaborate a bit more how you trigger this? > > >> > > >> legacy page_flip ioctl only verifies that the fb->format stays the same. > > >> It doesn't check anything else (afair never has), this is all up to > > >> drivers to verify. > > >> > > >> Personally I'd say add a check to reject this, since testing this and > > >> making sure it really works everywhere is probably a bit much on this old > > >> hw. > > > > > > If just the pitch changed, that probably wouldn't be much of a > > > problem, but if the pitch is changing, that probably implies other > > > stuff has changed as well and we'll just be chasing changes. I agree > > > it would be best to just reject anything other than updating the > > > scanout address. > > > > FWIW, that means page flipping cannot be used in some cases which work fine by changing the pitch, which can result in tearing: https://gitlab.freedesktop.org/xorg/xserver/-/issues/839 (which says the i915 driver handles this as well). > > > > Ok. In that case, @Zhenneng can you update all of the pitch in all of > the page_flip functions in radeon rather than just the evergreen one? atomic drivers handle this fairly ok-ish, since we have a proper atomic_check there. For legacy kms I just wouldn't bother, too many corners to validate. But also if you're bored, just do it :-) -Daniel > > Thanks, > > Alex > > > > > > -- > > Earthling Michel Dänzer | https://redhat.com > > Libre software enthusiast | Mesa and X developer
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 36a888e1b179..eeb590d2dec2 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -28,6 +28,7 @@ #include <drm/drm_vblank.h> #include <drm/radeon_drm.h> +#include <drm/drm_fourcc.h> #include "atom.h" #include "avivod.h" @@ -1414,10 +1415,15 @@ void evergreen_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base, bool async) { struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id]; + struct drm_framebuffer *fb = radeon_crtc->base.primary->fb; - /* update the scanout addresses */ + /* flip at hsync for async, default is vsync */ WREG32(EVERGREEN_GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, async ? EVERGREEN_GRPH_SURFACE_UPDATE_H_RETRACE_EN : 0); + /* update pitch */ + WREG32(EVERGREEN_GRPH_PITCH + radeon_crtc->crtc_offset, + fb->pitches[0] / fb->format->cpp[0]); + /* update the scanout addresses */ WREG32(EVERGREEN_GRPH_PRIMARY_SURFACE_ADDRESS_HIGH + radeon_crtc->crtc_offset, upper_32_bits(crtc_base)); WREG32(EVERGREEN_GRPH_PRIMARY_SURFACE_ADDRESS + radeon_crtc->crtc_offset,
When primary bo is updated, crtc's pitch may have not been updated, this will lead to show disorder content when user changes display mode, we update crtc's pitch in page flip to avoid this bug. This refers to amdgpu's pageflip. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Zhenneng Li <lizhenneng@kylinos.cn> --- drivers/gpu/drm/radeon/evergreen.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)