diff mbox series

drm/vc4: crtc: Make sure the HDMI controller is powered when disabling

Message ID 20210923185013.826679-1-maxime@cerno.tech (mailing list archive)
State New, archived
Headers show
Series drm/vc4: crtc: Make sure the HDMI controller is powered when disabling | expand

Commit Message

Maxime Ripard Sept. 23, 2021, 6:50 p.m. UTC
Since commit 875a4d536842 ("drm/vc4: drv: Disable the CRTC at boot
time"), during the initial setup of the driver we call into the VC4 HDMI
controller hooks to make sure the controller is properly disabled.

However, we were never making sure that the device was properly powered
while doing so. This never resulted in any (reported) issue in practice,
but since the introduction of commit 4209f03fcb8e ("drm/vc4: hdmi: Warn
if we access the controller while disabled") we get a loud complaint
when we do that kind of access.

Let's make sure we have the HDMI controller properly powered while
disabling it.

Fixes: 875a4d536842 ("drm/vc4: drv: Disable the CRTC at boot time")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_crtc.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

Comments

Nicolas Saenz Julienne Sept. 30, 2021, 3:40 p.m. UTC | #1
On Thu, 2021-09-23 at 20:50 +0200, Maxime Ripard wrote:
> Since commit 875a4d536842 ("drm/vc4: drv: Disable the CRTC at boot
> time"), during the initial setup of the driver we call into the VC4 HDMI
> controller hooks to make sure the controller is properly disabled.
> 
> However, we were never making sure that the device was properly powered
> while doing so. This never resulted in any (reported) issue in practice,
> but since the introduction of commit 4209f03fcb8e ("drm/vc4: hdmi: Warn
> if we access the controller while disabled") we get a loud complaint
> when we do that kind of access.
> 
> Let's make sure we have the HDMI controller properly powered while
> disabling it.
> 
> Fixes: 875a4d536842 ("drm/vc4: drv: Disable the CRTC at boot time")
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas
Maxime Ripard Oct. 13, 2021, 12:59 p.m. UTC | #2
On Thu, 23 Sep 2021 20:50:13 +0200, Maxime Ripard wrote:
> Since commit 875a4d536842 ("drm/vc4: drv: Disable the CRTC at boot
> time"), during the initial setup of the driver we call into the VC4 HDMI
> controller hooks to make sure the controller is properly disabled.
> 
> However, we were never making sure that the device was properly powered
> while doing so. This never resulted in any (reported) issue in practice,
> but since the introduction of commit 4209f03fcb8e ("drm/vc4: hdmi: Warn
> if we access the controller while disabled") we get a loud complaint
> when we do that kind of access.
> 
> [...]

Applied to drm/drm-misc (drm-misc-fixes).

Thanks!
Maxime
diff mbox series

Patch

diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index 18f5009ce90e..c0df11e5fcf2 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -32,6 +32,7 @@ 
 #include <linux/clk.h>
 #include <linux/component.h>
 #include <linux/of_device.h>
+#include <linux/pm_runtime.h>
 
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
@@ -42,6 +43,7 @@ 
 #include <drm/drm_vblank.h>
 
 #include "vc4_drv.h"
+#include "vc4_hdmi.h"
 #include "vc4_regs.h"
 
 #define HVS_FIFO_LATENCY_PIX	6
@@ -496,8 +498,10 @@  int vc4_crtc_disable_at_boot(struct drm_crtc *crtc)
 	enum vc4_encoder_type encoder_type;
 	const struct vc4_pv_data *pv_data;
 	struct drm_encoder *encoder;
+	struct vc4_hdmi *vc4_hdmi;
 	unsigned encoder_sel;
 	int channel;
+	int ret;
 
 	if (!(of_device_is_compatible(vc4_crtc->pdev->dev.of_node,
 				      "brcm,bcm2711-pixelvalve2") ||
@@ -525,7 +529,20 @@  int vc4_crtc_disable_at_boot(struct drm_crtc *crtc)
 	if (WARN_ON(!encoder))
 		return 0;
 
-	return vc4_crtc_disable(crtc, encoder, NULL, channel);
+	vc4_hdmi = encoder_to_vc4_hdmi(encoder);
+	ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
+	if (ret)
+		return ret;
+
+	ret = vc4_crtc_disable(crtc, encoder, NULL, channel);
+	if (ret)
+		return ret;
+
+	ret = pm_runtime_put(&vc4_hdmi->pdev->dev);
+	if (ret)
+		return ret;
+
+	return 0;
 }
 
 static void vc4_crtc_atomic_disable(struct drm_crtc *crtc,