@@ -176,6 +176,14 @@ bridge_to_mode(struct drm_bridge *bridge, struct drm_atomic_state *state)
return &crtc_state->adjusted_mode;
}
+static void chipone_readb(struct chipone *icn, u8 reg, u8 *val)
+{
+ if (icn->interface_i2c)
+ *val = i2c_smbus_read_byte_data(icn->client, reg);
+ else
+ mipi_dsi_generic_read(icn->dsi, (u8[]){reg, 1}, 2, val, 1);
+}
+
static void chipone_writeb(struct chipone *icn, u8 reg, u8 val)
{
if (icn->interface_i2c)
@@ -274,7 +282,21 @@ static void chipone_atomic_enable(struct drm_bridge *bridge,
const struct drm_bridge_state *bridge_state;
u16 hfp, hbp, hsync;
u32 bus_flags;
- u8 pol;
+ u8 pol, id[4];
+
+ chipone_readb(icn, VENDOR_ID, id);
+ chipone_readb(icn, DEVICE_ID_H, id + 1);
+ chipone_readb(icn, DEVICE_ID_L, id + 2);
+ chipone_readb(icn, VERSION_ID, id + 3);
+
+ dev_dbg(icn->dev,
+ "Chip IDs: Vendor=0x%02x Device=0x%02x:0x%02x Version=0x%02x\n",
+ id[0], id[1], id[2], id[3]);
+
+ if (id[0] != 0xc1 || id[1] != 0x62 || id[2] != 0x11) {
+ dev_dbg(icn->dev, "Invalid Chip IDs, aborting configuration\n");
+ return;
+ }
/* Get the DPI flags from the bridge state. */
bridge_state = drm_atomic_get_new_bridge_state(state, bridge);
Read out the Vendor/Chip/Version ID registers from the chip before performing any configuration, and validate that the registers have correct values. This is mostly a simple test whether DSI register access does work, since that tends to be broken on various bridges. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> To: dri-devel@lists.freedesktop.org --- drivers/gpu/drm/bridge/chipone-icn6211.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-)