| Message ID | 20220215043353.1256754-2-bjorn.andersson@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2,1/2] drm/msm/dpu: Add INTF_5 interrupts | expand |
On 15/02/2022 07:33, Bjorn Andersson wrote: > From: Rob Clark <robdclark@chromium.org> > > Add SC8180x to the hardware catalog, for initial support for the > platform. Due to limitations in the DP driver only one of the four DP > interfaces is left enabled. > > The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and > the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this > is flagged appropriately to ensure widebus is disabled - for now. > > Signed-off-by: Rob Clark <robdclark@chromium.org> > [bjorn: Reworked intf and irq definitions] > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Nit: missing dt bindings change. > --- > > Changes since v1: > - Dropped widebus flag > > .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 129 ++++++++++++++++++ > .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + > drivers/gpu/drm/msm/msm_drv.c | 1 + > 4 files changed, 132 insertions(+) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > index aa75991903a6..7ac0fe32df49 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > @@ -90,6 +90,17 @@ > BIT(MDP_INTF3_INTR) | \ > BIT(MDP_INTF4_INTR)) > > +#define IRQ_SC8180X_MASK (BIT(MDP_SSPP_TOP0_INTR) | \ > + BIT(MDP_SSPP_TOP0_INTR2) | \ > + BIT(MDP_SSPP_TOP0_HIST_INTR) | \ > + BIT(MDP_INTF0_INTR) | \ > + BIT(MDP_INTF1_INTR) | \ > + BIT(MDP_INTF2_INTR) | \ > + BIT(MDP_INTF3_INTR) | \ > + BIT(MDP_INTF4_INTR) | \ > + BIT(MDP_INTF5_INTR) | \ > + BIT(MDP_AD4_0_INTR) | \ > + BIT(MDP_AD4_1_INTR)) > > #define DEFAULT_PIXEL_RAM_SIZE (50 * 1024) > #define DEFAULT_DPU_LINE_WIDTH 2048 > @@ -225,6 +236,22 @@ static const struct dpu_caps sm8150_dpu_caps = { > .max_vdeci_exp = MAX_VERT_DECIMATION, > }; > > +static const struct dpu_caps sc8180x_dpu_caps = { > + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, > + .max_mixer_blendstages = 0xb, > + .qseed_type = DPU_SSPP_SCALER_QSEED3, > + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */ > + .ubwc_version = DPU_HW_UBWC_VER_30, > + .has_src_split = true, > + .has_dim_layer = true, > + .has_idle_pc = true, > + .has_3d_merge = true, > + .max_linewidth = 4096, > + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, > + .max_hdeci_exp = MAX_HORZ_DECIMATION, > + .max_vdeci_exp = MAX_VERT_DECIMATION, > +}; > + > static const struct dpu_caps sm8250_dpu_caps = { > .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, > .max_mixer_blendstages = 0xb, > @@ -293,6 +320,31 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = { > }, > }; > > +static const struct dpu_mdp_cfg sc8180x_mdp[] = { > + { > + .name = "top_0", .id = MDP_TOP, > + .base = 0x0, .len = 0x45C, > + .features = 0, > + .highest_bank_bit = 0x3, > + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { > + .reg_off = 0x2AC, .bit_off = 0}, > + .clk_ctrls[DPU_CLK_CTRL_VIG1] = { > + .reg_off = 0x2B4, .bit_off = 0}, > + .clk_ctrls[DPU_CLK_CTRL_VIG2] = { > + .reg_off = 0x2BC, .bit_off = 0}, > + .clk_ctrls[DPU_CLK_CTRL_VIG3] = { > + .reg_off = 0x2C4, .bit_off = 0}, > + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { > + .reg_off = 0x2AC, .bit_off = 8}, > + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { > + .reg_off = 0x2B4, .bit_off = 8}, > + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { > + .reg_off = 0x2BC, .bit_off = 8}, > + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { > + .reg_off = 0x2C4, .bit_off = 8}, > + }, > +}; > + > static const struct dpu_mdp_cfg sm8250_mdp[] = { > { > .name = "top_0", .id = MDP_TOP, > @@ -861,6 +913,16 @@ static const struct dpu_intf_cfg sc7280_intf[] = { > INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), > }; > > +static const struct dpu_intf_cfg sc8180x_intf[] = { > + INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25), > + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27), > + INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 28, 29), > + /* INTF_3 is for MST, wired to INTF_DP 0 and 1, use dummy index until this is supported */ > + INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 999, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 30, 31), > + INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 20, 21), > + INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23), > +}; > + > /************************************************************* > * VBIF sub blocks config > *************************************************************/ > @@ -931,6 +993,10 @@ static const struct dpu_qos_lut_entry sm8150_qos_linear[] = { > {.fl = 0, .lut = 0x0011222222223357 }, > }; > > +static const struct dpu_qos_lut_entry sc8180x_qos_linear[] = { > + {.fl = 4, .lut = 0x0000000000000357 }, > +}; > + > static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = { > {.fl = 10, .lut = 0x344556677}, > {.fl = 11, .lut = 0x3344556677}, > @@ -944,6 +1010,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_macrotile[] = { > {.fl = 0, .lut = 0x0011223344556677}, > }; > > +static const struct dpu_qos_lut_entry sc8180x_qos_macrotile[] = { > + {.fl = 10, .lut = 0x0000000344556677}, > +}; > + > static const struct dpu_qos_lut_entry sdm845_qos_nrt[] = { > {.fl = 0, .lut = 0x0}, > }; > @@ -1045,6 +1115,33 @@ static const struct dpu_perf_cfg sm8150_perf_data = { > .bw_inefficiency_factor = 120, > }; > > +static const struct dpu_perf_cfg sc8180x_perf_data = { > + .max_bw_low = 9600000, > + .max_bw_high = 9600000, > + .min_core_ib = 2400000, > + .min_llcc_ib = 800000, > + .min_dram_ib = 800000, > + .danger_lut_tbl = {0xf, 0xffff, 0x0, 0x0}, > + .qos_lut_tbl = { > + {.nentry = ARRAY_SIZE(sc8180x_qos_linear), > + .entries = sc8180x_qos_linear > + }, > + {.nentry = ARRAY_SIZE(sc8180x_qos_macrotile), > + .entries = sc8180x_qos_macrotile > + }, > + {.nentry = ARRAY_SIZE(sc7180_qos_nrt), > + .entries = sc7180_qos_nrt > + }, > + /* TODO: macrotile-qseed is different from macrotile */ > + }, > + .cdp_cfg = { > + {.rd_enable = 1, .wr_enable = 1}, > + {.rd_enable = 1, .wr_enable = 0} > + }, > + .clk_inefficiency_factor = 105, > + .bw_inefficiency_factor = 120, > +}; > + > static const struct dpu_perf_cfg sm8250_perf_data = { > .max_bw_low = 13700000, > .max_bw_high = 16600000, > @@ -1199,6 +1296,37 @@ static void sm8150_cfg_init(struct dpu_mdss_cfg *dpu_cfg) > }; > } > > +/* > + * sc8180x_cfg_init(): populate sc8180 dpu sub-blocks reg offsets > + * and instance counts. > + */ > +static void sc8180x_cfg_init(struct dpu_mdss_cfg *dpu_cfg) > +{ > + *dpu_cfg = (struct dpu_mdss_cfg){ > + .caps = &sc8180x_dpu_caps, > + .mdp_count = ARRAY_SIZE(sc8180x_mdp), > + .mdp = sc8180x_mdp, > + .ctl_count = ARRAY_SIZE(sm8150_ctl), > + .ctl = sm8150_ctl, > + .sspp_count = ARRAY_SIZE(sdm845_sspp), > + .sspp = sdm845_sspp, > + .mixer_count = ARRAY_SIZE(sm8150_lm), > + .mixer = sm8150_lm, > + .pingpong_count = ARRAY_SIZE(sm8150_pp), > + .pingpong = sm8150_pp, > + .merge_3d_count = ARRAY_SIZE(sm8150_merge_3d), > + .merge_3d = sm8150_merge_3d, > + .intf_count = ARRAY_SIZE(sc8180x_intf), > + .intf = sc8180x_intf, > + .vbif_count = ARRAY_SIZE(sdm845_vbif), > + .vbif = sdm845_vbif, > + .reg_dma_count = 1, > + .dma_cfg = sm8150_regdma, > + .perf = sc8180x_perf_data, > + .mdss_irqs = IRQ_SC8180X_MASK, > + }; > +} > + > /* > * sm8250_cfg_init(): populate sm8250 dpu sub-blocks reg offsets > * and instance counts. > @@ -1260,6 +1388,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = { > { .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init}, > { .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init}, > { .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init}, > + { .hw_rev = DPU_HW_VER_510, .cfg_init = sc8180x_cfg_init}, > { .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init}, > { .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init}, > { .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init}, > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > index 31af04afda7d..9572d29ff2ff 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > @@ -39,6 +39,7 @@ > #define DPU_HW_VER_410 DPU_HW_VER(4, 1, 0) /* sdm670 v1.0 */ > #define DPU_HW_VER_500 DPU_HW_VER(5, 0, 0) /* sm8150 v1.0 */ > #define DPU_HW_VER_501 DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */ > +#define DPU_HW_VER_510 DPU_HW_VER(5, 1, 1) /* sc8180 */ > #define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */ > #define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */ > #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */ > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > index 47fe11a84a77..cedc631f8498 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > @@ -1351,6 +1351,7 @@ const struct of_device_id dpu_dt_match[] = { > { .compatible = "qcom,sdm845-dpu", }, > { .compatible = "qcom,sc7180-dpu", }, > { .compatible = "qcom,sc7280-dpu", }, > + { .compatible = "qcom,sc8180x-dpu", }, > { .compatible = "qcom,sm8150-dpu", }, > { .compatible = "qcom,sm8250-dpu", }, > {} > diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c > index 555666e3f960..0f441d358b60 100644 > --- a/drivers/gpu/drm/msm/msm_drv.c > +++ b/drivers/gpu/drm/msm/msm_drv.c > @@ -1438,6 +1438,7 @@ static const struct of_device_id dt_match[] = { > { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU }, > { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU }, > { .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU }, > + { .compatible = "qcom,sc8180x-mdss", .data = (void *)KMS_DPU }, > { .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU }, > { .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU }, > {}
On 2/14/2022 8:33 PM, Bjorn Andersson wrote: > From: Rob Clark <robdclark@chromium.org> > > Add SC8180x to the hardware catalog, for initial support for the > platform. Due to limitations in the DP driver only one of the four DP > interfaces is left enabled. > > The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and > the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this > is flagged appropriately to ensure widebus is disabled - for now. > > Signed-off-by: Rob Clark <robdclark@chromium.org> > [bjorn: Reworked intf and irq definitions] > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > > Changes since v1: > - Dropped widebus flag > > .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 129 ++++++++++++++++++ > .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + > drivers/gpu/drm/msm/msm_drv.c | 1 + > 4 files changed, 132 insertions(+) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > index aa75991903a6..7ac0fe32df49 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > @@ -90,6 +90,17 @@ > BIT(MDP_INTF3_INTR) | \ > BIT(MDP_INTF4_INTR)) > > +#define IRQ_SC8180X_MASK (BIT(MDP_SSPP_TOP0_INTR) | \ > + BIT(MDP_SSPP_TOP0_INTR2) | \ > + BIT(MDP_SSPP_TOP0_HIST_INTR) | \ > + BIT(MDP_INTF0_INTR) | \ > + BIT(MDP_INTF1_INTR) | \ > + BIT(MDP_INTF2_INTR) | \ > + BIT(MDP_INTF3_INTR) | \ > + BIT(MDP_INTF4_INTR) | \ > + BIT(MDP_INTF5_INTR) | \ > + BIT(MDP_AD4_0_INTR) | \ > + BIT(MDP_AD4_1_INTR)) > > #define DEFAULT_PIXEL_RAM_SIZE (50 * 1024) > #define DEFAULT_DPU_LINE_WIDTH 2048 > @@ -225,6 +236,22 @@ static const struct dpu_caps sm8150_dpu_caps = { > .max_vdeci_exp = MAX_VERT_DECIMATION, > }; > > +static const struct dpu_caps sc8180x_dpu_caps = { > + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, > + .max_mixer_blendstages = 0xb, > + .qseed_type = DPU_SSPP_SCALER_QSEED3, > + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */ > + .ubwc_version = DPU_HW_UBWC_VER_30, > + .has_src_split = true, > + .has_dim_layer = true, > + .has_idle_pc = true, > + .has_3d_merge = true, > + .max_linewidth = 4096, > + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, > + .max_hdeci_exp = MAX_HORZ_DECIMATION, > + .max_vdeci_exp = MAX_VERT_DECIMATION, > +}; > + > static const struct dpu_caps sm8250_dpu_caps = { > .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, > .max_mixer_blendstages = 0xb, > @@ -293,6 +320,31 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = { > }, > }; > > +static const struct dpu_mdp_cfg sc8180x_mdp[] = { > + { > + .name = "top_0", .id = MDP_TOP, > + .base = 0x0, .len = 0x45C, > + .features = 0, > + .highest_bank_bit = 0x3, > + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { > + .reg_off = 0x2AC, .bit_off = 0}, > + .clk_ctrls[DPU_CLK_CTRL_VIG1] = { > + .reg_off = 0x2B4, .bit_off = 0}, > + .clk_ctrls[DPU_CLK_CTRL_VIG2] = { > + .reg_off = 0x2BC, .bit_off = 0}, > + .clk_ctrls[DPU_CLK_CTRL_VIG3] = { > + .reg_off = 0x2C4, .bit_off = 0}, > + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { > + .reg_off = 0x2AC, .bit_off = 8}, > + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { > + .reg_off = 0x2B4, .bit_off = 8}, > + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { > + .reg_off = 0x2BC, .bit_off = 8}, > + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { > + .reg_off = 0x2C4, .bit_off = 8}, > + }, > +}; > + > static const struct dpu_mdp_cfg sm8250_mdp[] = { > { > .name = "top_0", .id = MDP_TOP, > @@ -861,6 +913,16 @@ static const struct dpu_intf_cfg sc7280_intf[] = { > INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), > }; > > +static const struct dpu_intf_cfg sc8180x_intf[] = { > + INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25), > + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27), > + INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 28, 29), > + /* INTF_3 is for MST, wired to INTF_DP 0 and 1, use dummy index until this is supported */ > + INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 999, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 30, 31), > + INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 20, 21), > + INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23), This is a continued discussion from https://patchwork.freedesktop.org/patch/474179/. Shouldnt INTF_5 be marked as INTF_eDP? > +}; > + > /************************************************************* > * VBIF sub blocks config > *************************************************************/ > @@ -931,6 +993,10 @@ static const struct dpu_qos_lut_entry sm8150_qos_linear[] = { > {.fl = 0, .lut = 0x0011222222223357 }, > }; > > +static const struct dpu_qos_lut_entry sc8180x_qos_linear[] = { > + {.fl = 4, .lut = 0x0000000000000357 }, > +}; > + > static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = { > {.fl = 10, .lut = 0x344556677}, > {.fl = 11, .lut = 0x3344556677}, > @@ -944,6 +1010,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_macrotile[] = { > {.fl = 0, .lut = 0x0011223344556677}, > }; > > +static const struct dpu_qos_lut_entry sc8180x_qos_macrotile[] = { > + {.fl = 10, .lut = 0x0000000344556677}, > +}; > + > static const struct dpu_qos_lut_entry sdm845_qos_nrt[] = { > {.fl = 0, .lut = 0x0}, > }; > @@ -1045,6 +1115,33 @@ static const struct dpu_perf_cfg sm8150_perf_data = { > .bw_inefficiency_factor = 120, > }; > > +static const struct dpu_perf_cfg sc8180x_perf_data = { > + .max_bw_low = 9600000, > + .max_bw_high = 9600000, > + .min_core_ib = 2400000, > + .min_llcc_ib = 800000, > + .min_dram_ib = 800000, > + .danger_lut_tbl = {0xf, 0xffff, 0x0, 0x0}, > + .qos_lut_tbl = { > + {.nentry = ARRAY_SIZE(sc8180x_qos_linear), > + .entries = sc8180x_qos_linear > + }, > + {.nentry = ARRAY_SIZE(sc8180x_qos_macrotile), > + .entries = sc8180x_qos_macrotile > + }, > + {.nentry = ARRAY_SIZE(sc7180_qos_nrt), > + .entries = sc7180_qos_nrt > + }, > + /* TODO: macrotile-qseed is different from macrotile */ > + }, > + .cdp_cfg = { > + {.rd_enable = 1, .wr_enable = 1}, > + {.rd_enable = 1, .wr_enable = 0} > + }, > + .clk_inefficiency_factor = 105, > + .bw_inefficiency_factor = 120, > +}; > + > static const struct dpu_perf_cfg sm8250_perf_data = { > .max_bw_low = 13700000, > .max_bw_high = 16600000, > @@ -1199,6 +1296,37 @@ static void sm8150_cfg_init(struct dpu_mdss_cfg *dpu_cfg) > }; > } > > +/* > + * sc8180x_cfg_init(): populate sc8180 dpu sub-blocks reg offsets > + * and instance counts. > + */ > +static void sc8180x_cfg_init(struct dpu_mdss_cfg *dpu_cfg) > +{ > + *dpu_cfg = (struct dpu_mdss_cfg){ > + .caps = &sc8180x_dpu_caps, > + .mdp_count = ARRAY_SIZE(sc8180x_mdp), > + .mdp = sc8180x_mdp, > + .ctl_count = ARRAY_SIZE(sm8150_ctl), > + .ctl = sm8150_ctl, > + .sspp_count = ARRAY_SIZE(sdm845_sspp), > + .sspp = sdm845_sspp, > + .mixer_count = ARRAY_SIZE(sm8150_lm), > + .mixer = sm8150_lm, > + .pingpong_count = ARRAY_SIZE(sm8150_pp), > + .pingpong = sm8150_pp, > + .merge_3d_count = ARRAY_SIZE(sm8150_merge_3d), > + .merge_3d = sm8150_merge_3d, > + .intf_count = ARRAY_SIZE(sc8180x_intf), > + .intf = sc8180x_intf, > + .vbif_count = ARRAY_SIZE(sdm845_vbif), > + .vbif = sdm845_vbif, > + .reg_dma_count = 1, > + .dma_cfg = sm8150_regdma, > + .perf = sc8180x_perf_data, > + .mdss_irqs = IRQ_SC8180X_MASK, > + }; > +} > + > /* > * sm8250_cfg_init(): populate sm8250 dpu sub-blocks reg offsets > * and instance counts. > @@ -1260,6 +1388,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = { > { .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init}, > { .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init}, > { .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init}, > + { .hw_rev = DPU_HW_VER_510, .cfg_init = sc8180x_cfg_init}, > { .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init}, > { .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init}, > { .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init}, > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > index 31af04afda7d..9572d29ff2ff 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > @@ -39,6 +39,7 @@ > #define DPU_HW_VER_410 DPU_HW_VER(4, 1, 0) /* sdm670 v1.0 */ > #define DPU_HW_VER_500 DPU_HW_VER(5, 0, 0) /* sm8150 v1.0 */ > #define DPU_HW_VER_501 DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */ > +#define DPU_HW_VER_510 DPU_HW_VER(5, 1, 1) /* sc8180 */ > #define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */ > #define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */ > #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */ > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > index 47fe11a84a77..cedc631f8498 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > @@ -1351,6 +1351,7 @@ const struct of_device_id dpu_dt_match[] = { > { .compatible = "qcom,sdm845-dpu", }, > { .compatible = "qcom,sc7180-dpu", }, > { .compatible = "qcom,sc7280-dpu", }, > + { .compatible = "qcom,sc8180x-dpu", }, > { .compatible = "qcom,sm8150-dpu", }, > { .compatible = "qcom,sm8250-dpu", }, > {} > diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c > index 555666e3f960..0f441d358b60 100644 > --- a/drivers/gpu/drm/msm/msm_drv.c > +++ b/drivers/gpu/drm/msm/msm_drv.c > @@ -1438,6 +1438,7 @@ static const struct of_device_id dt_match[] = { > { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU }, > { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU }, > { .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU }, > + { .compatible = "qcom,sc8180x-mdss", .data = (void *)KMS_DPU }, > { .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU }, > { .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU }, > {}
On Tue 15 Feb 11:14 CST 2022, Abhinav Kumar wrote: > > > On 2/14/2022 8:33 PM, Bjorn Andersson wrote: > > From: Rob Clark <robdclark@chromium.org> > > > > Add SC8180x to the hardware catalog, for initial support for the > > platform. Due to limitations in the DP driver only one of the four DP > > interfaces is left enabled. > > > > The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and > > the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this > > is flagged appropriately to ensure widebus is disabled - for now. > > > > Signed-off-by: Rob Clark <robdclark@chromium.org> > > [bjorn: Reworked intf and irq definitions] > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > --- > > > > Changes since v1: > > - Dropped widebus flag > > > > .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 129 ++++++++++++++++++ > > .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + > > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + > > drivers/gpu/drm/msm/msm_drv.c | 1 + > > 4 files changed, 132 insertions(+) > > > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > > index aa75991903a6..7ac0fe32df49 100644 > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > > @@ -90,6 +90,17 @@ > > BIT(MDP_INTF3_INTR) | \ > > BIT(MDP_INTF4_INTR)) > > +#define IRQ_SC8180X_MASK (BIT(MDP_SSPP_TOP0_INTR) | \ > > + BIT(MDP_SSPP_TOP0_INTR2) | \ > > + BIT(MDP_SSPP_TOP0_HIST_INTR) | \ > > + BIT(MDP_INTF0_INTR) | \ > > + BIT(MDP_INTF1_INTR) | \ > > + BIT(MDP_INTF2_INTR) | \ > > + BIT(MDP_INTF3_INTR) | \ > > + BIT(MDP_INTF4_INTR) | \ > > + BIT(MDP_INTF5_INTR) | \ > > + BIT(MDP_AD4_0_INTR) | \ > > + BIT(MDP_AD4_1_INTR)) > > #define DEFAULT_PIXEL_RAM_SIZE (50 * 1024) > > #define DEFAULT_DPU_LINE_WIDTH 2048 > > @@ -225,6 +236,22 @@ static const struct dpu_caps sm8150_dpu_caps = { > > .max_vdeci_exp = MAX_VERT_DECIMATION, > > }; > > +static const struct dpu_caps sc8180x_dpu_caps = { > > + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, > > + .max_mixer_blendstages = 0xb, > > + .qseed_type = DPU_SSPP_SCALER_QSEED3, > > + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */ > > + .ubwc_version = DPU_HW_UBWC_VER_30, > > + .has_src_split = true, > > + .has_dim_layer = true, > > + .has_idle_pc = true, > > + .has_3d_merge = true, > > + .max_linewidth = 4096, > > + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, > > + .max_hdeci_exp = MAX_HORZ_DECIMATION, > > + .max_vdeci_exp = MAX_VERT_DECIMATION, > > +}; > > + > > static const struct dpu_caps sm8250_dpu_caps = { > > .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, > > .max_mixer_blendstages = 0xb, > > @@ -293,6 +320,31 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = { > > }, > > }; > > +static const struct dpu_mdp_cfg sc8180x_mdp[] = { > > + { > > + .name = "top_0", .id = MDP_TOP, > > + .base = 0x0, .len = 0x45C, > > + .features = 0, > > + .highest_bank_bit = 0x3, > > + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { > > + .reg_off = 0x2AC, .bit_off = 0}, > > + .clk_ctrls[DPU_CLK_CTRL_VIG1] = { > > + .reg_off = 0x2B4, .bit_off = 0}, > > + .clk_ctrls[DPU_CLK_CTRL_VIG2] = { > > + .reg_off = 0x2BC, .bit_off = 0}, > > + .clk_ctrls[DPU_CLK_CTRL_VIG3] = { > > + .reg_off = 0x2C4, .bit_off = 0}, > > + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { > > + .reg_off = 0x2AC, .bit_off = 8}, > > + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { > > + .reg_off = 0x2B4, .bit_off = 8}, > > + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { > > + .reg_off = 0x2BC, .bit_off = 8}, > > + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { > > + .reg_off = 0x2C4, .bit_off = 8}, > > + }, > > +}; > > + > > static const struct dpu_mdp_cfg sm8250_mdp[] = { > > { > > .name = "top_0", .id = MDP_TOP, > > @@ -861,6 +913,16 @@ static const struct dpu_intf_cfg sc7280_intf[] = { > > INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), > > }; > > +static const struct dpu_intf_cfg sc8180x_intf[] = { > > + INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25), > > + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27), > > + INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 28, 29), > > + /* INTF_3 is for MST, wired to INTF_DP 0 and 1, use dummy index until this is supported */ > > + INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 999, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 30, 31), > > + INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 20, 21), > > + INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23), > > This is a continued discussion from > https://patchwork.freedesktop.org/patch/474179/. > > Shouldnt INTF_5 be marked as INTF_eDP? > Might be, I didn't even know we had an INTF_EDP define... Is there any reason to distinguish DP and EDP in the DPU? I see sc7280 doesn't distinguish the DP and EDP interfaces. Regards, Bjorn > > +}; > > + > > /************************************************************* > > * VBIF sub blocks config > > *************************************************************/ > > @@ -931,6 +993,10 @@ static const struct dpu_qos_lut_entry sm8150_qos_linear[] = { > > {.fl = 0, .lut = 0x0011222222223357 }, > > }; > > +static const struct dpu_qos_lut_entry sc8180x_qos_linear[] = { > > + {.fl = 4, .lut = 0x0000000000000357 }, > > +}; > > + > > static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = { > > {.fl = 10, .lut = 0x344556677}, > > {.fl = 11, .lut = 0x3344556677}, > > @@ -944,6 +1010,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_macrotile[] = { > > {.fl = 0, .lut = 0x0011223344556677}, > > }; > > +static const struct dpu_qos_lut_entry sc8180x_qos_macrotile[] = { > > + {.fl = 10, .lut = 0x0000000344556677}, > > +}; > > + > > static const struct dpu_qos_lut_entry sdm845_qos_nrt[] = { > > {.fl = 0, .lut = 0x0}, > > }; > > @@ -1045,6 +1115,33 @@ static const struct dpu_perf_cfg sm8150_perf_data = { > > .bw_inefficiency_factor = 120, > > }; > > +static const struct dpu_perf_cfg sc8180x_perf_data = { > > + .max_bw_low = 9600000, > > + .max_bw_high = 9600000, > > + .min_core_ib = 2400000, > > + .min_llcc_ib = 800000, > > + .min_dram_ib = 800000, > > + .danger_lut_tbl = {0xf, 0xffff, 0x0, 0x0}, > > + .qos_lut_tbl = { > > + {.nentry = ARRAY_SIZE(sc8180x_qos_linear), > > + .entries = sc8180x_qos_linear > > + }, > > + {.nentry = ARRAY_SIZE(sc8180x_qos_macrotile), > > + .entries = sc8180x_qos_macrotile > > + }, > > + {.nentry = ARRAY_SIZE(sc7180_qos_nrt), > > + .entries = sc7180_qos_nrt > > + }, > > + /* TODO: macrotile-qseed is different from macrotile */ > > + }, > > + .cdp_cfg = { > > + {.rd_enable = 1, .wr_enable = 1}, > > + {.rd_enable = 1, .wr_enable = 0} > > + }, > > + .clk_inefficiency_factor = 105, > > + .bw_inefficiency_factor = 120, > > +}; > > + > > static const struct dpu_perf_cfg sm8250_perf_data = { > > .max_bw_low = 13700000, > > .max_bw_high = 16600000, > > @@ -1199,6 +1296,37 @@ static void sm8150_cfg_init(struct dpu_mdss_cfg *dpu_cfg) > > }; > > } > > +/* > > + * sc8180x_cfg_init(): populate sc8180 dpu sub-blocks reg offsets > > + * and instance counts. > > + */ > > +static void sc8180x_cfg_init(struct dpu_mdss_cfg *dpu_cfg) > > +{ > > + *dpu_cfg = (struct dpu_mdss_cfg){ > > + .caps = &sc8180x_dpu_caps, > > + .mdp_count = ARRAY_SIZE(sc8180x_mdp), > > + .mdp = sc8180x_mdp, > > + .ctl_count = ARRAY_SIZE(sm8150_ctl), > > + .ctl = sm8150_ctl, > > + .sspp_count = ARRAY_SIZE(sdm845_sspp), > > + .sspp = sdm845_sspp, > > + .mixer_count = ARRAY_SIZE(sm8150_lm), > > + .mixer = sm8150_lm, > > + .pingpong_count = ARRAY_SIZE(sm8150_pp), > > + .pingpong = sm8150_pp, > > + .merge_3d_count = ARRAY_SIZE(sm8150_merge_3d), > > + .merge_3d = sm8150_merge_3d, > > + .intf_count = ARRAY_SIZE(sc8180x_intf), > > + .intf = sc8180x_intf, > > + .vbif_count = ARRAY_SIZE(sdm845_vbif), > > + .vbif = sdm845_vbif, > > + .reg_dma_count = 1, > > + .dma_cfg = sm8150_regdma, > > + .perf = sc8180x_perf_data, > > + .mdss_irqs = IRQ_SC8180X_MASK, > > + }; > > +} > > + > > /* > > * sm8250_cfg_init(): populate sm8250 dpu sub-blocks reg offsets > > * and instance counts. > > @@ -1260,6 +1388,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = { > > { .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init}, > > { .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init}, > > { .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init}, > > + { .hw_rev = DPU_HW_VER_510, .cfg_init = sc8180x_cfg_init}, > > { .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init}, > > { .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init}, > > { .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init}, > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > > index 31af04afda7d..9572d29ff2ff 100644 > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > > @@ -39,6 +39,7 @@ > > #define DPU_HW_VER_410 DPU_HW_VER(4, 1, 0) /* sdm670 v1.0 */ > > #define DPU_HW_VER_500 DPU_HW_VER(5, 0, 0) /* sm8150 v1.0 */ > > #define DPU_HW_VER_501 DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */ > > +#define DPU_HW_VER_510 DPU_HW_VER(5, 1, 1) /* sc8180 */ > > #define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */ > > #define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */ > > #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */ > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > > index 47fe11a84a77..cedc631f8498 100644 > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > > @@ -1351,6 +1351,7 @@ const struct of_device_id dpu_dt_match[] = { > > { .compatible = "qcom,sdm845-dpu", }, > > { .compatible = "qcom,sc7180-dpu", }, > > { .compatible = "qcom,sc7280-dpu", }, > > + { .compatible = "qcom,sc8180x-dpu", }, > > { .compatible = "qcom,sm8150-dpu", }, > > { .compatible = "qcom,sm8250-dpu", }, > > {} > > diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c > > index 555666e3f960..0f441d358b60 100644 > > --- a/drivers/gpu/drm/msm/msm_drv.c > > +++ b/drivers/gpu/drm/msm/msm_drv.c > > @@ -1438,6 +1438,7 @@ static const struct of_device_id dt_match[] = { > > { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU }, > > { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU }, > > { .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU }, > > + { .compatible = "qcom,sc8180x-mdss", .data = (void *)KMS_DPU }, > > { .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU }, > > { .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU }, > > {}
On 2/15/2022 9:28 AM, Bjorn Andersson wrote: > On Tue 15 Feb 11:14 CST 2022, Abhinav Kumar wrote: > >> >> >> On 2/14/2022 8:33 PM, Bjorn Andersson wrote: >>> From: Rob Clark <robdclark@chromium.org> >>> >>> Add SC8180x to the hardware catalog, for initial support for the >>> platform. Due to limitations in the DP driver only one of the four DP >>> interfaces is left enabled. >>> >>> The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and >>> the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this >>> is flagged appropriately to ensure widebus is disabled - for now. >>> >>> Signed-off-by: Rob Clark <robdclark@chromium.org> >>> [bjorn: Reworked intf and irq definitions] >>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> >>> --- >>> >>> Changes since v1: >>> - Dropped widebus flag >>> >>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 129 ++++++++++++++++++ >>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + >>> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + >>> drivers/gpu/drm/msm/msm_drv.c | 1 + >>> 4 files changed, 132 insertions(+) >>> >>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>> index aa75991903a6..7ac0fe32df49 100644 >>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>> @@ -90,6 +90,17 @@ >>> BIT(MDP_INTF3_INTR) | \ >>> BIT(MDP_INTF4_INTR)) >>> +#define IRQ_SC8180X_MASK (BIT(MDP_SSPP_TOP0_INTR) | \ >>> + BIT(MDP_SSPP_TOP0_INTR2) | \ >>> + BIT(MDP_SSPP_TOP0_HIST_INTR) | \ >>> + BIT(MDP_INTF0_INTR) | \ >>> + BIT(MDP_INTF1_INTR) | \ >>> + BIT(MDP_INTF2_INTR) | \ >>> + BIT(MDP_INTF3_INTR) | \ >>> + BIT(MDP_INTF4_INTR) | \ >>> + BIT(MDP_INTF5_INTR) | \ >>> + BIT(MDP_AD4_0_INTR) | \ >>> + BIT(MDP_AD4_1_INTR)) >>> #define DEFAULT_PIXEL_RAM_SIZE (50 * 1024) >>> #define DEFAULT_DPU_LINE_WIDTH 2048 >>> @@ -225,6 +236,22 @@ static const struct dpu_caps sm8150_dpu_caps = { >>> .max_vdeci_exp = MAX_VERT_DECIMATION, >>> }; >>> +static const struct dpu_caps sc8180x_dpu_caps = { >>> + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, >>> + .max_mixer_blendstages = 0xb, >>> + .qseed_type = DPU_SSPP_SCALER_QSEED3, >>> + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */ >>> + .ubwc_version = DPU_HW_UBWC_VER_30, >>> + .has_src_split = true, >>> + .has_dim_layer = true, >>> + .has_idle_pc = true, >>> + .has_3d_merge = true, >>> + .max_linewidth = 4096, >>> + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, >>> + .max_hdeci_exp = MAX_HORZ_DECIMATION, >>> + .max_vdeci_exp = MAX_VERT_DECIMATION, >>> +}; >>> + >>> static const struct dpu_caps sm8250_dpu_caps = { >>> .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, >>> .max_mixer_blendstages = 0xb, >>> @@ -293,6 +320,31 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = { >>> }, >>> }; >>> +static const struct dpu_mdp_cfg sc8180x_mdp[] = { >>> + { >>> + .name = "top_0", .id = MDP_TOP, >>> + .base = 0x0, .len = 0x45C, >>> + .features = 0, >>> + .highest_bank_bit = 0x3, >>> + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { >>> + .reg_off = 0x2AC, .bit_off = 0}, >>> + .clk_ctrls[DPU_CLK_CTRL_VIG1] = { >>> + .reg_off = 0x2B4, .bit_off = 0}, >>> + .clk_ctrls[DPU_CLK_CTRL_VIG2] = { >>> + .reg_off = 0x2BC, .bit_off = 0}, >>> + .clk_ctrls[DPU_CLK_CTRL_VIG3] = { >>> + .reg_off = 0x2C4, .bit_off = 0}, >>> + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { >>> + .reg_off = 0x2AC, .bit_off = 8}, >>> + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { >>> + .reg_off = 0x2B4, .bit_off = 8}, >>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { >>> + .reg_off = 0x2BC, .bit_off = 8}, >>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { >>> + .reg_off = 0x2C4, .bit_off = 8}, >>> + }, >>> +}; >>> + >>> static const struct dpu_mdp_cfg sm8250_mdp[] = { >>> { >>> .name = "top_0", .id = MDP_TOP, >>> @@ -861,6 +913,16 @@ static const struct dpu_intf_cfg sc7280_intf[] = { >>> INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), >>> }; >>> +static const struct dpu_intf_cfg sc8180x_intf[] = { >>> + INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25), >>> + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27), >>> + INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 28, 29), >>> + /* INTF_3 is for MST, wired to INTF_DP 0 and 1, use dummy index until this is supported */ >>> + INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 999, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 30, 31), >>> + INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 20, 21), >>> + INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23), >> >> This is a continued discussion from >> https://patchwork.freedesktop.org/patch/474179/. >> >> Shouldnt INTF_5 be marked as INTF_eDP? >> > > Might be, I didn't even know we had an INTF_EDP define... > > Is there any reason to distinguish DP and EDP in the DPU? I see sc7280 > doesn't distinguish the DP and EDP interfaces. > > Regards, > Bjorn > Like I have mentioned in the other patch, I think we have enough confusion between eDP and DP with the common driver. Since DPU does have separate interfaces I think we should fix that. Regarding sc7280 using INTF_DP, I synced up with Sankeerth. He referred to your change https://patchwork.freedesktop.org/patch/457776/?series=92992&rev=5 as it was posted earlier and ended up using the same INTF_DP macro. So its turning out to be a cyclical error. I think we should fix both. >>> +}; >>> + >>> /************************************************************* >>> * VBIF sub blocks config >>> *************************************************************/ >>> @@ -931,6 +993,10 @@ static const struct dpu_qos_lut_entry sm8150_qos_linear[] = { >>> {.fl = 0, .lut = 0x0011222222223357 }, >>> }; >>> +static const struct dpu_qos_lut_entry sc8180x_qos_linear[] = { >>> + {.fl = 4, .lut = 0x0000000000000357 }, >>> +}; >>> + >>> static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = { >>> {.fl = 10, .lut = 0x344556677}, >>> {.fl = 11, .lut = 0x3344556677}, >>> @@ -944,6 +1010,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_macrotile[] = { >>> {.fl = 0, .lut = 0x0011223344556677}, >>> }; >>> +static const struct dpu_qos_lut_entry sc8180x_qos_macrotile[] = { >>> + {.fl = 10, .lut = 0x0000000344556677}, >>> +}; >>> + >>> static const struct dpu_qos_lut_entry sdm845_qos_nrt[] = { >>> {.fl = 0, .lut = 0x0}, >>> }; >>> @@ -1045,6 +1115,33 @@ static const struct dpu_perf_cfg sm8150_perf_data = { >>> .bw_inefficiency_factor = 120, >>> }; >>> +static const struct dpu_perf_cfg sc8180x_perf_data = { >>> + .max_bw_low = 9600000, >>> + .max_bw_high = 9600000, >>> + .min_core_ib = 2400000, >>> + .min_llcc_ib = 800000, >>> + .min_dram_ib = 800000, >>> + .danger_lut_tbl = {0xf, 0xffff, 0x0, 0x0}, >>> + .qos_lut_tbl = { >>> + {.nentry = ARRAY_SIZE(sc8180x_qos_linear), >>> + .entries = sc8180x_qos_linear >>> + }, >>> + {.nentry = ARRAY_SIZE(sc8180x_qos_macrotile), >>> + .entries = sc8180x_qos_macrotile >>> + }, >>> + {.nentry = ARRAY_SIZE(sc7180_qos_nrt), >>> + .entries = sc7180_qos_nrt >>> + }, >>> + /* TODO: macrotile-qseed is different from macrotile */ >>> + }, >>> + .cdp_cfg = { >>> + {.rd_enable = 1, .wr_enable = 1}, >>> + {.rd_enable = 1, .wr_enable = 0} >>> + }, >>> + .clk_inefficiency_factor = 105, >>> + .bw_inefficiency_factor = 120, >>> +}; >>> + >>> static const struct dpu_perf_cfg sm8250_perf_data = { >>> .max_bw_low = 13700000, >>> .max_bw_high = 16600000, >>> @@ -1199,6 +1296,37 @@ static void sm8150_cfg_init(struct dpu_mdss_cfg *dpu_cfg) >>> }; >>> } >>> +/* >>> + * sc8180x_cfg_init(): populate sc8180 dpu sub-blocks reg offsets >>> + * and instance counts. >>> + */ >>> +static void sc8180x_cfg_init(struct dpu_mdss_cfg *dpu_cfg) >>> +{ >>> + *dpu_cfg = (struct dpu_mdss_cfg){ >>> + .caps = &sc8180x_dpu_caps, >>> + .mdp_count = ARRAY_SIZE(sc8180x_mdp), >>> + .mdp = sc8180x_mdp, >>> + .ctl_count = ARRAY_SIZE(sm8150_ctl), >>> + .ctl = sm8150_ctl, >>> + .sspp_count = ARRAY_SIZE(sdm845_sspp), >>> + .sspp = sdm845_sspp, >>> + .mixer_count = ARRAY_SIZE(sm8150_lm), >>> + .mixer = sm8150_lm, >>> + .pingpong_count = ARRAY_SIZE(sm8150_pp), >>> + .pingpong = sm8150_pp, >>> + .merge_3d_count = ARRAY_SIZE(sm8150_merge_3d), >>> + .merge_3d = sm8150_merge_3d, >>> + .intf_count = ARRAY_SIZE(sc8180x_intf), >>> + .intf = sc8180x_intf, >>> + .vbif_count = ARRAY_SIZE(sdm845_vbif), >>> + .vbif = sdm845_vbif, >>> + .reg_dma_count = 1, >>> + .dma_cfg = sm8150_regdma, >>> + .perf = sc8180x_perf_data, >>> + .mdss_irqs = IRQ_SC8180X_MASK, >>> + }; >>> +} >>> + >>> /* >>> * sm8250_cfg_init(): populate sm8250 dpu sub-blocks reg offsets >>> * and instance counts. >>> @@ -1260,6 +1388,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = { >>> { .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init}, >>> { .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init}, >>> { .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init}, >>> + { .hw_rev = DPU_HW_VER_510, .cfg_init = sc8180x_cfg_init}, >>> { .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init}, >>> { .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init}, >>> { .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init}, >>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h >>> index 31af04afda7d..9572d29ff2ff 100644 >>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h >>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h >>> @@ -39,6 +39,7 @@ >>> #define DPU_HW_VER_410 DPU_HW_VER(4, 1, 0) /* sdm670 v1.0 */ >>> #define DPU_HW_VER_500 DPU_HW_VER(5, 0, 0) /* sm8150 v1.0 */ >>> #define DPU_HW_VER_501 DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */ >>> +#define DPU_HW_VER_510 DPU_HW_VER(5, 1, 1) /* sc8180 */ >>> #define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */ >>> #define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */ >>> #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */ >>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c >>> index 47fe11a84a77..cedc631f8498 100644 >>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c >>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c >>> @@ -1351,6 +1351,7 @@ const struct of_device_id dpu_dt_match[] = { >>> { .compatible = "qcom,sdm845-dpu", }, >>> { .compatible = "qcom,sc7180-dpu", }, >>> { .compatible = "qcom,sc7280-dpu", }, >>> + { .compatible = "qcom,sc8180x-dpu", }, >>> { .compatible = "qcom,sm8150-dpu", }, >>> { .compatible = "qcom,sm8250-dpu", }, >>> {} >>> diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c >>> index 555666e3f960..0f441d358b60 100644 >>> --- a/drivers/gpu/drm/msm/msm_drv.c >>> +++ b/drivers/gpu/drm/msm/msm_drv.c >>> @@ -1438,6 +1438,7 @@ static const struct of_device_id dt_match[] = { >>> { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU }, >>> { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU }, >>> { .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU }, >>> + { .compatible = "qcom,sc8180x-mdss", .data = (void *)KMS_DPU }, >>> { .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU }, >>> { .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU }, >>> {}
On Tue, 15 Feb 2022 at 20:42, Abhinav Kumar <quic_abhinavk@quicinc.com> wrote: > On 2/15/2022 9:28 AM, Bjorn Andersson wrote: > > On Tue 15 Feb 11:14 CST 2022, Abhinav Kumar wrote: > > > >> > >> > >> On 2/14/2022 8:33 PM, Bjorn Andersson wrote: > >>> From: Rob Clark <robdclark@chromium.org> > >>> > >>> Add SC8180x to the hardware catalog, for initial support for the > >>> platform. Due to limitations in the DP driver only one of the four DP > >>> interfaces is left enabled. > >>> > >>> The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and > >>> the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this > >>> is flagged appropriately to ensure widebus is disabled - for now. > >>> > >>> Signed-off-by: Rob Clark <robdclark@chromium.org> > >>> [bjorn: Reworked intf and irq definitions] > >>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > >>> --- > >>> > >>> Changes since v1: > >>> - Dropped widebus flag > >>> > >>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 129 ++++++++++++++++++ > >>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + > >>> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + > >>> drivers/gpu/drm/msm/msm_drv.c | 1 + > >>> 4 files changed, 132 insertions(+) > >>> > >>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > >>> index aa75991903a6..7ac0fe32df49 100644 > >>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > >>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > >>> @@ -90,6 +90,17 @@ > >>> BIT(MDP_INTF3_INTR) | \ > >>> BIT(MDP_INTF4_INTR)) > >>> +#define IRQ_SC8180X_MASK (BIT(MDP_SSPP_TOP0_INTR) | \ > >>> + BIT(MDP_SSPP_TOP0_INTR2) | \ > >>> + BIT(MDP_SSPP_TOP0_HIST_INTR) | \ > >>> + BIT(MDP_INTF0_INTR) | \ > >>> + BIT(MDP_INTF1_INTR) | \ > >>> + BIT(MDP_INTF2_INTR) | \ > >>> + BIT(MDP_INTF3_INTR) | \ > >>> + BIT(MDP_INTF4_INTR) | \ > >>> + BIT(MDP_INTF5_INTR) | \ > >>> + BIT(MDP_AD4_0_INTR) | \ > >>> + BIT(MDP_AD4_1_INTR)) > >>> #define DEFAULT_PIXEL_RAM_SIZE (50 * 1024) > >>> #define DEFAULT_DPU_LINE_WIDTH 2048 > >>> @@ -225,6 +236,22 @@ static const struct dpu_caps sm8150_dpu_caps = { > >>> .max_vdeci_exp = MAX_VERT_DECIMATION, > >>> }; > >>> +static const struct dpu_caps sc8180x_dpu_caps = { > >>> + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, > >>> + .max_mixer_blendstages = 0xb, > >>> + .qseed_type = DPU_SSPP_SCALER_QSEED3, > >>> + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */ > >>> + .ubwc_version = DPU_HW_UBWC_VER_30, > >>> + .has_src_split = true, > >>> + .has_dim_layer = true, > >>> + .has_idle_pc = true, > >>> + .has_3d_merge = true, > >>> + .max_linewidth = 4096, > >>> + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, > >>> + .max_hdeci_exp = MAX_HORZ_DECIMATION, > >>> + .max_vdeci_exp = MAX_VERT_DECIMATION, > >>> +}; > >>> + > >>> static const struct dpu_caps sm8250_dpu_caps = { > >>> .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, > >>> .max_mixer_blendstages = 0xb, > >>> @@ -293,6 +320,31 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = { > >>> }, > >>> }; > >>> +static const struct dpu_mdp_cfg sc8180x_mdp[] = { > >>> + { > >>> + .name = "top_0", .id = MDP_TOP, > >>> + .base = 0x0, .len = 0x45C, > >>> + .features = 0, > >>> + .highest_bank_bit = 0x3, > >>> + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { > >>> + .reg_off = 0x2AC, .bit_off = 0}, > >>> + .clk_ctrls[DPU_CLK_CTRL_VIG1] = { > >>> + .reg_off = 0x2B4, .bit_off = 0}, > >>> + .clk_ctrls[DPU_CLK_CTRL_VIG2] = { > >>> + .reg_off = 0x2BC, .bit_off = 0}, > >>> + .clk_ctrls[DPU_CLK_CTRL_VIG3] = { > >>> + .reg_off = 0x2C4, .bit_off = 0}, > >>> + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { > >>> + .reg_off = 0x2AC, .bit_off = 8}, > >>> + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { > >>> + .reg_off = 0x2B4, .bit_off = 8}, > >>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { > >>> + .reg_off = 0x2BC, .bit_off = 8}, > >>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { > >>> + .reg_off = 0x2C4, .bit_off = 8}, > >>> + }, > >>> +}; > >>> + > >>> static const struct dpu_mdp_cfg sm8250_mdp[] = { > >>> { > >>> .name = "top_0", .id = MDP_TOP, > >>> @@ -861,6 +913,16 @@ static const struct dpu_intf_cfg sc7280_intf[] = { > >>> INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), > >>> }; > >>> +static const struct dpu_intf_cfg sc8180x_intf[] = { > >>> + INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25), > >>> + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27), > >>> + INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 28, 29), > >>> + /* INTF_3 is for MST, wired to INTF_DP 0 and 1, use dummy index until this is supported */ > >>> + INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 999, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 30, 31), > >>> + INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 20, 21), > >>> + INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23), > >> > >> This is a continued discussion from > >> https://patchwork.freedesktop.org/patch/474179/. > >> > >> Shouldnt INTF_5 be marked as INTF_eDP? > >> > > > > Might be, I didn't even know we had an INTF_EDP define... > > > > Is there any reason to distinguish DP and EDP in the DPU? I see sc7280 > > doesn't distinguish the DP and EDP interfaces. > > > > Regards, > > Bjorn > > > > Like I have mentioned in the other patch, I think we have enough > confusion between eDP and DP with the common driver. Since DPU does have > separate interfaces I think we should fix that. > > Regarding sc7280 using INTF_DP, I synced up with Sankeerth. He referred > to your change > https://patchwork.freedesktop.org/patch/457776/?series=92992&rev=5 as it > was posted earlier and ended up using the same INTF_DP macro. So its > turning out to be a cyclical error. > > I think we should fix both. So, what is the value for DPU to distinguish between eDP and DP interfaces? Would we get anything except the (intf_type == INTF_EDP || intf_type == INTF_DP) instead of (intf_type == INTF_DP) in all the cases where the type is checked? (thus leading us to cases when someone would forget to add INTF_EDP next to INTF_DP) Also, if we are switching from INTF_DP to INTF_EDP, should we stop using end-to-end numbering (like MSM_DP_CONTROLLER_2 for INTF_5) and add a separate numbering scheme for INTF_EDP? With all that in mind I'd suggest to: - use INTF_DP for both DP and new eDP interfaces - remove INTF_EDP usage from the dpu1 driver - add a note that INTF_EDP corresponds to older eDP blocks (found on 8x74/8x84) > > >>> +}; > >>> + > >>> /************************************************************* > >>> * VBIF sub blocks config > >>> *************************************************************/ > >>> @@ -931,6 +993,10 @@ static const struct dpu_qos_lut_entry sm8150_qos_linear[] = { > >>> {.fl = 0, .lut = 0x0011222222223357 }, > >>> }; > >>> +static const struct dpu_qos_lut_entry sc8180x_qos_linear[] = { > >>> + {.fl = 4, .lut = 0x0000000000000357 }, > >>> +}; > >>> + > >>> static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = { > >>> {.fl = 10, .lut = 0x344556677}, > >>> {.fl = 11, .lut = 0x3344556677}, > >>> @@ -944,6 +1010,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_macrotile[] = { > >>> {.fl = 0, .lut = 0x0011223344556677}, > >>> }; > >>> +static const struct dpu_qos_lut_entry sc8180x_qos_macrotile[] = { > >>> + {.fl = 10, .lut = 0x0000000344556677}, > >>> +}; > >>> + > >>> static const struct dpu_qos_lut_entry sdm845_qos_nrt[] = { > >>> {.fl = 0, .lut = 0x0}, > >>> }; > >>> @@ -1045,6 +1115,33 @@ static const struct dpu_perf_cfg sm8150_perf_data = { > >>> .bw_inefficiency_factor = 120, > >>> }; > >>> +static const struct dpu_perf_cfg sc8180x_perf_data = { > >>> + .max_bw_low = 9600000, > >>> + .max_bw_high = 9600000, > >>> + .min_core_ib = 2400000, > >>> + .min_llcc_ib = 800000, > >>> + .min_dram_ib = 800000, > >>> + .danger_lut_tbl = {0xf, 0xffff, 0x0, 0x0}, > >>> + .qos_lut_tbl = { > >>> + {.nentry = ARRAY_SIZE(sc8180x_qos_linear), > >>> + .entries = sc8180x_qos_linear > >>> + }, > >>> + {.nentry = ARRAY_SIZE(sc8180x_qos_macrotile), > >>> + .entries = sc8180x_qos_macrotile > >>> + }, > >>> + {.nentry = ARRAY_SIZE(sc7180_qos_nrt), > >>> + .entries = sc7180_qos_nrt > >>> + }, > >>> + /* TODO: macrotile-qseed is different from macrotile */ > >>> + }, > >>> + .cdp_cfg = { > >>> + {.rd_enable = 1, .wr_enable = 1}, > >>> + {.rd_enable = 1, .wr_enable = 0} > >>> + }, > >>> + .clk_inefficiency_factor = 105, > >>> + .bw_inefficiency_factor = 120, > >>> +}; > >>> + > >>> static const struct dpu_perf_cfg sm8250_perf_data = { > >>> .max_bw_low = 13700000, > >>> .max_bw_high = 16600000, > >>> @@ -1199,6 +1296,37 @@ static void sm8150_cfg_init(struct dpu_mdss_cfg *dpu_cfg) > >>> }; > >>> } > >>> +/* > >>> + * sc8180x_cfg_init(): populate sc8180 dpu sub-blocks reg offsets > >>> + * and instance counts. > >>> + */ > >>> +static void sc8180x_cfg_init(struct dpu_mdss_cfg *dpu_cfg) > >>> +{ > >>> + *dpu_cfg = (struct dpu_mdss_cfg){ > >>> + .caps = &sc8180x_dpu_caps, > >>> + .mdp_count = ARRAY_SIZE(sc8180x_mdp), > >>> + .mdp = sc8180x_mdp, > >>> + .ctl_count = ARRAY_SIZE(sm8150_ctl), > >>> + .ctl = sm8150_ctl, > >>> + .sspp_count = ARRAY_SIZE(sdm845_sspp), > >>> + .sspp = sdm845_sspp, > >>> + .mixer_count = ARRAY_SIZE(sm8150_lm), > >>> + .mixer = sm8150_lm, > >>> + .pingpong_count = ARRAY_SIZE(sm8150_pp), > >>> + .pingpong = sm8150_pp, > >>> + .merge_3d_count = ARRAY_SIZE(sm8150_merge_3d), > >>> + .merge_3d = sm8150_merge_3d, > >>> + .intf_count = ARRAY_SIZE(sc8180x_intf), > >>> + .intf = sc8180x_intf, > >>> + .vbif_count = ARRAY_SIZE(sdm845_vbif), > >>> + .vbif = sdm845_vbif, > >>> + .reg_dma_count = 1, > >>> + .dma_cfg = sm8150_regdma, > >>> + .perf = sc8180x_perf_data, > >>> + .mdss_irqs = IRQ_SC8180X_MASK, > >>> + }; > >>> +} > >>> + > >>> /* > >>> * sm8250_cfg_init(): populate sm8250 dpu sub-blocks reg offsets > >>> * and instance counts. > >>> @@ -1260,6 +1388,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = { > >>> { .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init}, > >>> { .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init}, > >>> { .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init}, > >>> + { .hw_rev = DPU_HW_VER_510, .cfg_init = sc8180x_cfg_init}, > >>> { .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init}, > >>> { .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init}, > >>> { .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init}, > >>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > >>> index 31af04afda7d..9572d29ff2ff 100644 > >>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > >>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > >>> @@ -39,6 +39,7 @@ > >>> #define DPU_HW_VER_410 DPU_HW_VER(4, 1, 0) /* sdm670 v1.0 */ > >>> #define DPU_HW_VER_500 DPU_HW_VER(5, 0, 0) /* sm8150 v1.0 */ > >>> #define DPU_HW_VER_501 DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */ > >>> +#define DPU_HW_VER_510 DPU_HW_VER(5, 1, 1) /* sc8180 */ > >>> #define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */ > >>> #define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */ > >>> #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */ > >>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > >>> index 47fe11a84a77..cedc631f8498 100644 > >>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > >>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > >>> @@ -1351,6 +1351,7 @@ const struct of_device_id dpu_dt_match[] = { > >>> { .compatible = "qcom,sdm845-dpu", }, > >>> { .compatible = "qcom,sc7180-dpu", }, > >>> { .compatible = "qcom,sc7280-dpu", }, > >>> + { .compatible = "qcom,sc8180x-dpu", }, > >>> { .compatible = "qcom,sm8150-dpu", }, > >>> { .compatible = "qcom,sm8250-dpu", }, > >>> {} > >>> diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c > >>> index 555666e3f960..0f441d358b60 100644 > >>> --- a/drivers/gpu/drm/msm/msm_drv.c > >>> +++ b/drivers/gpu/drm/msm/msm_drv.c > >>> @@ -1438,6 +1438,7 @@ static const struct of_device_id dt_match[] = { > >>> { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU }, > >>> { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU }, > >>> { .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU }, > >>> + { .compatible = "qcom,sc8180x-mdss", .data = (void *)KMS_DPU }, > >>> { .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU }, > >>> { .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU }, > >>> {}
On 2/15/2022 10:42 AM, Dmitry Baryshkov wrote: > On Tue, 15 Feb 2022 at 20:42, Abhinav Kumar <quic_abhinavk@quicinc.com> wrote: >> On 2/15/2022 9:28 AM, Bjorn Andersson wrote: >>> On Tue 15 Feb 11:14 CST 2022, Abhinav Kumar wrote: >>> >>>> >>>> >>>> On 2/14/2022 8:33 PM, Bjorn Andersson wrote: >>>>> From: Rob Clark <robdclark@chromium.org> >>>>> >>>>> Add SC8180x to the hardware catalog, for initial support for the >>>>> platform. Due to limitations in the DP driver only one of the four DP >>>>> interfaces is left enabled. >>>>> >>>>> The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and >>>>> the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this >>>>> is flagged appropriately to ensure widebus is disabled - for now. >>>>> >>>>> Signed-off-by: Rob Clark <robdclark@chromium.org> >>>>> [bjorn: Reworked intf and irq definitions] >>>>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> >>>>> --- >>>>> >>>>> Changes since v1: >>>>> - Dropped widebus flag >>>>> >>>>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 129 ++++++++++++++++++ >>>>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + >>>>> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + >>>>> drivers/gpu/drm/msm/msm_drv.c | 1 + >>>>> 4 files changed, 132 insertions(+) >>>>> >>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>>>> index aa75991903a6..7ac0fe32df49 100644 >>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>>>> @@ -90,6 +90,17 @@ >>>>> BIT(MDP_INTF3_INTR) | \ >>>>> BIT(MDP_INTF4_INTR)) >>>>> +#define IRQ_SC8180X_MASK (BIT(MDP_SSPP_TOP0_INTR) | \ >>>>> + BIT(MDP_SSPP_TOP0_INTR2) | \ >>>>> + BIT(MDP_SSPP_TOP0_HIST_INTR) | \ >>>>> + BIT(MDP_INTF0_INTR) | \ >>>>> + BIT(MDP_INTF1_INTR) | \ >>>>> + BIT(MDP_INTF2_INTR) | \ >>>>> + BIT(MDP_INTF3_INTR) | \ >>>>> + BIT(MDP_INTF4_INTR) | \ >>>>> + BIT(MDP_INTF5_INTR) | \ >>>>> + BIT(MDP_AD4_0_INTR) | \ >>>>> + BIT(MDP_AD4_1_INTR)) >>>>> #define DEFAULT_PIXEL_RAM_SIZE (50 * 1024) >>>>> #define DEFAULT_DPU_LINE_WIDTH 2048 >>>>> @@ -225,6 +236,22 @@ static const struct dpu_caps sm8150_dpu_caps = { >>>>> .max_vdeci_exp = MAX_VERT_DECIMATION, >>>>> }; >>>>> +static const struct dpu_caps sc8180x_dpu_caps = { >>>>> + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, >>>>> + .max_mixer_blendstages = 0xb, >>>>> + .qseed_type = DPU_SSPP_SCALER_QSEED3, >>>>> + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */ >>>>> + .ubwc_version = DPU_HW_UBWC_VER_30, >>>>> + .has_src_split = true, >>>>> + .has_dim_layer = true, >>>>> + .has_idle_pc = true, >>>>> + .has_3d_merge = true, >>>>> + .max_linewidth = 4096, >>>>> + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, >>>>> + .max_hdeci_exp = MAX_HORZ_DECIMATION, >>>>> + .max_vdeci_exp = MAX_VERT_DECIMATION, >>>>> +}; >>>>> + >>>>> static const struct dpu_caps sm8250_dpu_caps = { >>>>> .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, >>>>> .max_mixer_blendstages = 0xb, >>>>> @@ -293,6 +320,31 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = { >>>>> }, >>>>> }; >>>>> +static const struct dpu_mdp_cfg sc8180x_mdp[] = { >>>>> + { >>>>> + .name = "top_0", .id = MDP_TOP, >>>>> + .base = 0x0, .len = 0x45C, >>>>> + .features = 0, >>>>> + .highest_bank_bit = 0x3, >>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { >>>>> + .reg_off = 0x2AC, .bit_off = 0}, >>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG1] = { >>>>> + .reg_off = 0x2B4, .bit_off = 0}, >>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG2] = { >>>>> + .reg_off = 0x2BC, .bit_off = 0}, >>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG3] = { >>>>> + .reg_off = 0x2C4, .bit_off = 0}, >>>>> + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { >>>>> + .reg_off = 0x2AC, .bit_off = 8}, >>>>> + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { >>>>> + .reg_off = 0x2B4, .bit_off = 8}, >>>>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { >>>>> + .reg_off = 0x2BC, .bit_off = 8}, >>>>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { >>>>> + .reg_off = 0x2C4, .bit_off = 8}, >>>>> + }, >>>>> +}; >>>>> + >>>>> static const struct dpu_mdp_cfg sm8250_mdp[] = { >>>>> { >>>>> .name = "top_0", .id = MDP_TOP, >>>>> @@ -861,6 +913,16 @@ static const struct dpu_intf_cfg sc7280_intf[] = { >>>>> INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), >>>>> }; >>>>> +static const struct dpu_intf_cfg sc8180x_intf[] = { >>>>> + INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25), >>>>> + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27), >>>>> + INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 28, 29), >>>>> + /* INTF_3 is for MST, wired to INTF_DP 0 and 1, use dummy index until this is supported */ >>>>> + INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 999, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 30, 31), >>>>> + INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 20, 21), >>>>> + INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23), >>>> >>>> This is a continued discussion from >>>> https://patchwork.freedesktop.org/patch/474179/. >>>> >>>> Shouldnt INTF_5 be marked as INTF_eDP? >>>> >>> >>> Might be, I didn't even know we had an INTF_EDP define... >>> >>> Is there any reason to distinguish DP and EDP in the DPU? I see sc7280 >>> doesn't distinguish the DP and EDP interfaces. >>> >>> Regards, >>> Bjorn >>> >> >> Like I have mentioned in the other patch, I think we have enough >> confusion between eDP and DP with the common driver. Since DPU does have >> separate interfaces I think we should fix that. >> >> Regarding sc7280 using INTF_DP, I synced up with Sankeerth. He referred >> to your change >> https://patchwork.freedesktop.org/patch/457776/?series=92992&rev=5 as it >> was posted earlier and ended up using the same INTF_DP macro. So its >> turning out to be a cyclical error. >> >> I think we should fix both. > > So, what is the value for DPU to distinguish between eDP and DP interfaces? > Would we get anything except the (intf_type == INTF_EDP || intf_type > == INTF_DP) instead of (intf_type == INTF_DP) in all the cases where > the type is checked? There are only two places currently where I am seeing this OR condition between INTF_DP and INTF_eDP. I do not have an example to give you today of where we would need to distinguish eDP and DP but I cannot guarantee we will not have such a case. > (thus leading us to cases when someone would forget to add INTF_EDP > next to INTF_DP) > > Also, if we are switching from INTF_DP to INTF_EDP, should we stop > using end-to-end numbering (like MSM_DP_CONTROLLER_2 for INTF_5) and > add a separate numbering scheme for INTF_EDP? > We should change the controller ID to match what it actually is. Now that you pointed this out, this looks even more confusing to me to say that MSM_DP_CONTROLLER_2 is actually a EDP controller because fundamentally and even hardware block wise they are different. Why do we want to keep building something on top of this confusing terminology knowing that it can be corrected when its fairly in the development stage rather than realizing later it will break. We have only been discussing that eDP and DP are treated equally in the DPU code and hence why do we need to distinguish. As per current code yes, but I cannot and probably noone else can guarantee that in future there can be cases were we want to distinguish the two for something. Thats the overally consensus within our team. So if this going to work smoothly by just fixing two entries in the hw catalog I would rather do that now rather than realizing this down the line again just to save usage of one more enum. > With all that in mind I'd suggest to: > - use INTF_DP for both DP and new eDP interfaces > - remove INTF_EDP usage from the dpu1 driver > - add a note that INTF_EDP corresponds to older eDP blocks (found on 8x74/8x84) > >> >>>>> +}; >>>>> + >>>>> /************************************************************* >>>>> * VBIF sub blocks config >>>>> *************************************************************/ >>>>> @@ -931,6 +993,10 @@ static const struct dpu_qos_lut_entry sm8150_qos_linear[] = { >>>>> {.fl = 0, .lut = 0x0011222222223357 }, >>>>> }; >>>>> +static const struct dpu_qos_lut_entry sc8180x_qos_linear[] = { >>>>> + {.fl = 4, .lut = 0x0000000000000357 }, >>>>> +}; >>>>> + >>>>> static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = { >>>>> {.fl = 10, .lut = 0x344556677}, >>>>> {.fl = 11, .lut = 0x3344556677}, >>>>> @@ -944,6 +1010,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_macrotile[] = { >>>>> {.fl = 0, .lut = 0x0011223344556677}, >>>>> }; >>>>> +static const struct dpu_qos_lut_entry sc8180x_qos_macrotile[] = { >>>>> + {.fl = 10, .lut = 0x0000000344556677}, >>>>> +}; >>>>> + >>>>> static const struct dpu_qos_lut_entry sdm845_qos_nrt[] = { >>>>> {.fl = 0, .lut = 0x0}, >>>>> }; >>>>> @@ -1045,6 +1115,33 @@ static const struct dpu_perf_cfg sm8150_perf_data = { >>>>> .bw_inefficiency_factor = 120, >>>>> }; >>>>> +static const struct dpu_perf_cfg sc8180x_perf_data = { >>>>> + .max_bw_low = 9600000, >>>>> + .max_bw_high = 9600000, >>>>> + .min_core_ib = 2400000, >>>>> + .min_llcc_ib = 800000, >>>>> + .min_dram_ib = 800000, >>>>> + .danger_lut_tbl = {0xf, 0xffff, 0x0, 0x0}, >>>>> + .qos_lut_tbl = { >>>>> + {.nentry = ARRAY_SIZE(sc8180x_qos_linear), >>>>> + .entries = sc8180x_qos_linear >>>>> + }, >>>>> + {.nentry = ARRAY_SIZE(sc8180x_qos_macrotile), >>>>> + .entries = sc8180x_qos_macrotile >>>>> + }, >>>>> + {.nentry = ARRAY_SIZE(sc7180_qos_nrt), >>>>> + .entries = sc7180_qos_nrt >>>>> + }, >>>>> + /* TODO: macrotile-qseed is different from macrotile */ >>>>> + }, >>>>> + .cdp_cfg = { >>>>> + {.rd_enable = 1, .wr_enable = 1}, >>>>> + {.rd_enable = 1, .wr_enable = 0} >>>>> + }, >>>>> + .clk_inefficiency_factor = 105, >>>>> + .bw_inefficiency_factor = 120, >>>>> +}; >>>>> + >>>>> static const struct dpu_perf_cfg sm8250_perf_data = { >>>>> .max_bw_low = 13700000, >>>>> .max_bw_high = 16600000, >>>>> @@ -1199,6 +1296,37 @@ static void sm8150_cfg_init(struct dpu_mdss_cfg *dpu_cfg) >>>>> }; >>>>> } >>>>> +/* >>>>> + * sc8180x_cfg_init(): populate sc8180 dpu sub-blocks reg offsets >>>>> + * and instance counts. >>>>> + */ >>>>> +static void sc8180x_cfg_init(struct dpu_mdss_cfg *dpu_cfg) >>>>> +{ >>>>> + *dpu_cfg = (struct dpu_mdss_cfg){ >>>>> + .caps = &sc8180x_dpu_caps, >>>>> + .mdp_count = ARRAY_SIZE(sc8180x_mdp), >>>>> + .mdp = sc8180x_mdp, >>>>> + .ctl_count = ARRAY_SIZE(sm8150_ctl), >>>>> + .ctl = sm8150_ctl, >>>>> + .sspp_count = ARRAY_SIZE(sdm845_sspp), >>>>> + .sspp = sdm845_sspp, >>>>> + .mixer_count = ARRAY_SIZE(sm8150_lm), >>>>> + .mixer = sm8150_lm, >>>>> + .pingpong_count = ARRAY_SIZE(sm8150_pp), >>>>> + .pingpong = sm8150_pp, >>>>> + .merge_3d_count = ARRAY_SIZE(sm8150_merge_3d), >>>>> + .merge_3d = sm8150_merge_3d, >>>>> + .intf_count = ARRAY_SIZE(sc8180x_intf), >>>>> + .intf = sc8180x_intf, >>>>> + .vbif_count = ARRAY_SIZE(sdm845_vbif), >>>>> + .vbif = sdm845_vbif, >>>>> + .reg_dma_count = 1, >>>>> + .dma_cfg = sm8150_regdma, >>>>> + .perf = sc8180x_perf_data, >>>>> + .mdss_irqs = IRQ_SC8180X_MASK, >>>>> + }; >>>>> +} >>>>> + >>>>> /* >>>>> * sm8250_cfg_init(): populate sm8250 dpu sub-blocks reg offsets >>>>> * and instance counts. >>>>> @@ -1260,6 +1388,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = { >>>>> { .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init}, >>>>> { .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init}, >>>>> { .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init}, >>>>> + { .hw_rev = DPU_HW_VER_510, .cfg_init = sc8180x_cfg_init}, >>>>> { .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init}, >>>>> { .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init}, >>>>> { .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init}, >>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h >>>>> index 31af04afda7d..9572d29ff2ff 100644 >>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h >>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h >>>>> @@ -39,6 +39,7 @@ >>>>> #define DPU_HW_VER_410 DPU_HW_VER(4, 1, 0) /* sdm670 v1.0 */ >>>>> #define DPU_HW_VER_500 DPU_HW_VER(5, 0, 0) /* sm8150 v1.0 */ >>>>> #define DPU_HW_VER_501 DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */ >>>>> +#define DPU_HW_VER_510 DPU_HW_VER(5, 1, 1) /* sc8180 */ >>>>> #define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */ >>>>> #define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */ >>>>> #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */ >>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c >>>>> index 47fe11a84a77..cedc631f8498 100644 >>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c >>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c >>>>> @@ -1351,6 +1351,7 @@ const struct of_device_id dpu_dt_match[] = { >>>>> { .compatible = "qcom,sdm845-dpu", }, >>>>> { .compatible = "qcom,sc7180-dpu", }, >>>>> { .compatible = "qcom,sc7280-dpu", }, >>>>> + { .compatible = "qcom,sc8180x-dpu", }, >>>>> { .compatible = "qcom,sm8150-dpu", }, >>>>> { .compatible = "qcom,sm8250-dpu", }, >>>>> {} >>>>> diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c >>>>> index 555666e3f960..0f441d358b60 100644 >>>>> --- a/drivers/gpu/drm/msm/msm_drv.c >>>>> +++ b/drivers/gpu/drm/msm/msm_drv.c >>>>> @@ -1438,6 +1438,7 @@ static const struct of_device_id dt_match[] = { >>>>> { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU }, >>>>> { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU }, >>>>> { .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU }, >>>>> + { .compatible = "qcom,sc8180x-mdss", .data = (void *)KMS_DPU }, >>>>> { .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU }, >>>>> { .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU }, >>>>> {} > > >
On Tue, 15 Feb 2022 at 23:21, Abhinav Kumar <quic_abhinavk@quicinc.com> wrote: > On 2/15/2022 10:42 AM, Dmitry Baryshkov wrote: > > On Tue, 15 Feb 2022 at 20:42, Abhinav Kumar <quic_abhinavk@quicinc.com> wrote: > >> On 2/15/2022 9:28 AM, Bjorn Andersson wrote: > >>> On Tue 15 Feb 11:14 CST 2022, Abhinav Kumar wrote: > >>> > >>>> > >>>> > >>>> On 2/14/2022 8:33 PM, Bjorn Andersson wrote: > >>>>> From: Rob Clark <robdclark@chromium.org> > >>>>> > >>>>> Add SC8180x to the hardware catalog, for initial support for the > >>>>> platform. Due to limitations in the DP driver only one of the four DP > >>>>> interfaces is left enabled. > >>>>> > >>>>> The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and > >>>>> the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this > >>>>> is flagged appropriately to ensure widebus is disabled - for now. > >>>>> > >>>>> Signed-off-by: Rob Clark <robdclark@chromium.org> > >>>>> [bjorn: Reworked intf and irq definitions] > >>>>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > >>>>> --- > >>>>> > >>>>> Changes since v1: > >>>>> - Dropped widebus flag > >>>>> > >>>>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 129 ++++++++++++++++++ > >>>>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + > >>>>> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + > >>>>> drivers/gpu/drm/msm/msm_drv.c | 1 + > >>>>> 4 files changed, 132 insertions(+) > >>>>> > >>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > >>>>> index aa75991903a6..7ac0fe32df49 100644 > >>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > >>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > >>>>> @@ -90,6 +90,17 @@ > >>>>> BIT(MDP_INTF3_INTR) | \ > >>>>> BIT(MDP_INTF4_INTR)) > >>>>> +#define IRQ_SC8180X_MASK (BIT(MDP_SSPP_TOP0_INTR) | \ > >>>>> + BIT(MDP_SSPP_TOP0_INTR2) | \ > >>>>> + BIT(MDP_SSPP_TOP0_HIST_INTR) | \ > >>>>> + BIT(MDP_INTF0_INTR) | \ > >>>>> + BIT(MDP_INTF1_INTR) | \ > >>>>> + BIT(MDP_INTF2_INTR) | \ > >>>>> + BIT(MDP_INTF3_INTR) | \ > >>>>> + BIT(MDP_INTF4_INTR) | \ > >>>>> + BIT(MDP_INTF5_INTR) | \ > >>>>> + BIT(MDP_AD4_0_INTR) | \ > >>>>> + BIT(MDP_AD4_1_INTR)) > >>>>> #define DEFAULT_PIXEL_RAM_SIZE (50 * 1024) > >>>>> #define DEFAULT_DPU_LINE_WIDTH 2048 > >>>>> @@ -225,6 +236,22 @@ static const struct dpu_caps sm8150_dpu_caps = { > >>>>> .max_vdeci_exp = MAX_VERT_DECIMATION, > >>>>> }; > >>>>> +static const struct dpu_caps sc8180x_dpu_caps = { > >>>>> + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, > >>>>> + .max_mixer_blendstages = 0xb, > >>>>> + .qseed_type = DPU_SSPP_SCALER_QSEED3, > >>>>> + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */ > >>>>> + .ubwc_version = DPU_HW_UBWC_VER_30, > >>>>> + .has_src_split = true, > >>>>> + .has_dim_layer = true, > >>>>> + .has_idle_pc = true, > >>>>> + .has_3d_merge = true, > >>>>> + .max_linewidth = 4096, > >>>>> + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, > >>>>> + .max_hdeci_exp = MAX_HORZ_DECIMATION, > >>>>> + .max_vdeci_exp = MAX_VERT_DECIMATION, > >>>>> +}; > >>>>> + > >>>>> static const struct dpu_caps sm8250_dpu_caps = { > >>>>> .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, > >>>>> .max_mixer_blendstages = 0xb, > >>>>> @@ -293,6 +320,31 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = { > >>>>> }, > >>>>> }; > >>>>> +static const struct dpu_mdp_cfg sc8180x_mdp[] = { > >>>>> + { > >>>>> + .name = "top_0", .id = MDP_TOP, > >>>>> + .base = 0x0, .len = 0x45C, > >>>>> + .features = 0, > >>>>> + .highest_bank_bit = 0x3, > >>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { > >>>>> + .reg_off = 0x2AC, .bit_off = 0}, > >>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG1] = { > >>>>> + .reg_off = 0x2B4, .bit_off = 0}, > >>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG2] = { > >>>>> + .reg_off = 0x2BC, .bit_off = 0}, > >>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG3] = { > >>>>> + .reg_off = 0x2C4, .bit_off = 0}, > >>>>> + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { > >>>>> + .reg_off = 0x2AC, .bit_off = 8}, > >>>>> + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { > >>>>> + .reg_off = 0x2B4, .bit_off = 8}, > >>>>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { > >>>>> + .reg_off = 0x2BC, .bit_off = 8}, > >>>>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { > >>>>> + .reg_off = 0x2C4, .bit_off = 8}, > >>>>> + }, > >>>>> +}; > >>>>> + > >>>>> static const struct dpu_mdp_cfg sm8250_mdp[] = { > >>>>> { > >>>>> .name = "top_0", .id = MDP_TOP, > >>>>> @@ -861,6 +913,16 @@ static const struct dpu_intf_cfg sc7280_intf[] = { > >>>>> INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), > >>>>> }; > >>>>> +static const struct dpu_intf_cfg sc8180x_intf[] = { > >>>>> + INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25), > >>>>> + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27), > >>>>> + INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 28, 29), > >>>>> + /* INTF_3 is for MST, wired to INTF_DP 0 and 1, use dummy index until this is supported */ > >>>>> + INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 999, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 30, 31), > >>>>> + INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 20, 21), > >>>>> + INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23), > >>>> > >>>> This is a continued discussion from > >>>> https://patchwork.freedesktop.org/patch/474179/. > >>>> > >>>> Shouldnt INTF_5 be marked as INTF_eDP? > >>>> > >>> > >>> Might be, I didn't even know we had an INTF_EDP define... > >>> > >>> Is there any reason to distinguish DP and EDP in the DPU? I see sc7280 > >>> doesn't distinguish the DP and EDP interfaces. > >>> > >>> Regards, > >>> Bjorn > >>> > >> > >> Like I have mentioned in the other patch, I think we have enough > >> confusion between eDP and DP with the common driver. Since DPU does have > >> separate interfaces I think we should fix that. > >> > >> Regarding sc7280 using INTF_DP, I synced up with Sankeerth. He referred > >> to your change > >> https://patchwork.freedesktop.org/patch/457776/?series=92992&rev=5 as it > >> was posted earlier and ended up using the same INTF_DP macro. So its > >> turning out to be a cyclical error. > >> > >> I think we should fix both. > > > > So, what is the value for DPU to distinguish between eDP and DP interfaces? > > Would we get anything except the (intf_type == INTF_EDP || intf_type > > == INTF_DP) instead of (intf_type == INTF_DP) in all the cases where > > the type is checked? > > There are only two places currently where I am seeing this OR condition > between INTF_DP and INTF_eDP. I do not have an example to give you today > of where we would need to distinguish eDP and DP but I cannot guarantee > we will not have such a case. > > > (thus leading us to cases when someone would forget to add INTF_EDP > > next to INTF_DP) > > > > Also, if we are switching from INTF_DP to INTF_EDP, should we stop > > using end-to-end numbering (like MSM_DP_CONTROLLER_2 for INTF_5) and > > add a separate numbering scheme for INTF_EDP? > > > We should change the controller ID to match what it actually is. > > Now that you pointed this out, this looks even more confusing to me to > say that MSM_DP_CONTROLLER_2 is actually a EDP controller because > fundamentally and even hardware block wise they are different. So, do we split msm_priv->dp too? It's indexed using MSM_DP_CONTROLLER_n entries. Do we want to teach drm/msm/dp code that there are priv->dp[] and priv->edp arrays? > Why do we want to keep building something on top of this confusing > terminology knowing that it can be corrected when its fairly in the > development stage rather than realizing later it will break. > > We have only been discussing that eDP and DP are treated equally in the > DPU code and hence why do we need to distinguish. > > As per current code yes, but I cannot and probably noone else can > guarantee that in future there can be cases were we want to distinguish > the two for something. Me too. For now I see INTF_DP as a useful abstraction for 'the interface that's handled by drm/msm/dp and shares common timing requirements'. At this moment I estimate that splitting it properly into INTF_DP and INTF_EDP can bring more troubles than possible future cases. If at some point we were to distinguish DP and eDP usecases of INTF_DP, I would suggest adding is_embedded property rather than splitting away INTF_EDP. It's good to think about future cases and expansions. But it's too easy to create a monstruosos constructs supporting all possible features that no one can understand, grok and maintain. Been there, created several of them, refactored others. Let me throw in yet-another-possible-if: if at some point the hardware supported iDP using the same DP block, would you split INTF_iDP? > Thats the overally consensus within our team. > > So if this going to work smoothly by just fixing two entries in the hw > catalog I would rather do that now rather than realizing this down the > line again just to save usage of one more enum. > > > With all that in mind I'd suggest to: > > - use INTF_DP for both DP and new eDP interfaces > > - remove INTF_EDP usage from the dpu1 driver > > - add a note that INTF_EDP corresponds to older eDP blocks (found on 8x74/8x84) > > > >> > >>>>> +}; > >>>>> + > >>>>> /************************************************************* > >>>>> * VBIF sub blocks config > >>>>> *************************************************************/ > >>>>> @@ -931,6 +993,10 @@ static const struct dpu_qos_lut_entry sm8150_qos_linear[] = { > >>>>> {.fl = 0, .lut = 0x0011222222223357 }, > >>>>> }; > >>>>> +static const struct dpu_qos_lut_entry sc8180x_qos_linear[] = { > >>>>> + {.fl = 4, .lut = 0x0000000000000357 }, > >>>>> +}; > >>>>> + > >>>>> static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = { > >>>>> {.fl = 10, .lut = 0x344556677}, > >>>>> {.fl = 11, .lut = 0x3344556677}, > >>>>> @@ -944,6 +1010,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_macrotile[] = { > >>>>> {.fl = 0, .lut = 0x0011223344556677}, > >>>>> }; > >>>>> +static const struct dpu_qos_lut_entry sc8180x_qos_macrotile[] = { > >>>>> + {.fl = 10, .lut = 0x0000000344556677}, > >>>>> +}; > >>>>> + > >>>>> static const struct dpu_qos_lut_entry sdm845_qos_nrt[] = { > >>>>> {.fl = 0, .lut = 0x0}, > >>>>> }; > >>>>> @@ -1045,6 +1115,33 @@ static const struct dpu_perf_cfg sm8150_perf_data = { > >>>>> .bw_inefficiency_factor = 120, > >>>>> }; > >>>>> +static const struct dpu_perf_cfg sc8180x_perf_data = { > >>>>> + .max_bw_low = 9600000, > >>>>> + .max_bw_high = 9600000, > >>>>> + .min_core_ib = 2400000, > >>>>> + .min_llcc_ib = 800000, > >>>>> + .min_dram_ib = 800000, > >>>>> + .danger_lut_tbl = {0xf, 0xffff, 0x0, 0x0}, > >>>>> + .qos_lut_tbl = { > >>>>> + {.nentry = ARRAY_SIZE(sc8180x_qos_linear), > >>>>> + .entries = sc8180x_qos_linear > >>>>> + }, > >>>>> + {.nentry = ARRAY_SIZE(sc8180x_qos_macrotile), > >>>>> + .entries = sc8180x_qos_macrotile > >>>>> + }, > >>>>> + {.nentry = ARRAY_SIZE(sc7180_qos_nrt), > >>>>> + .entries = sc7180_qos_nrt > >>>>> + }, > >>>>> + /* TODO: macrotile-qseed is different from macrotile */ > >>>>> + }, > >>>>> + .cdp_cfg = { > >>>>> + {.rd_enable = 1, .wr_enable = 1}, > >>>>> + {.rd_enable = 1, .wr_enable = 0} > >>>>> + }, > >>>>> + .clk_inefficiency_factor = 105, > >>>>> + .bw_inefficiency_factor = 120, > >>>>> +}; > >>>>> + > >>>>> static const struct dpu_perf_cfg sm8250_perf_data = { > >>>>> .max_bw_low = 13700000, > >>>>> .max_bw_high = 16600000, > >>>>> @@ -1199,6 +1296,37 @@ static void sm8150_cfg_init(struct dpu_mdss_cfg *dpu_cfg) > >>>>> }; > >>>>> } > >>>>> +/* > >>>>> + * sc8180x_cfg_init(): populate sc8180 dpu sub-blocks reg offsets > >>>>> + * and instance counts. > >>>>> + */ > >>>>> +static void sc8180x_cfg_init(struct dpu_mdss_cfg *dpu_cfg) > >>>>> +{ > >>>>> + *dpu_cfg = (struct dpu_mdss_cfg){ > >>>>> + .caps = &sc8180x_dpu_caps, > >>>>> + .mdp_count = ARRAY_SIZE(sc8180x_mdp), > >>>>> + .mdp = sc8180x_mdp, > >>>>> + .ctl_count = ARRAY_SIZE(sm8150_ctl), > >>>>> + .ctl = sm8150_ctl, > >>>>> + .sspp_count = ARRAY_SIZE(sdm845_sspp), > >>>>> + .sspp = sdm845_sspp, > >>>>> + .mixer_count = ARRAY_SIZE(sm8150_lm), > >>>>> + .mixer = sm8150_lm, > >>>>> + .pingpong_count = ARRAY_SIZE(sm8150_pp), > >>>>> + .pingpong = sm8150_pp, > >>>>> + .merge_3d_count = ARRAY_SIZE(sm8150_merge_3d), > >>>>> + .merge_3d = sm8150_merge_3d, > >>>>> + .intf_count = ARRAY_SIZE(sc8180x_intf), > >>>>> + .intf = sc8180x_intf, > >>>>> + .vbif_count = ARRAY_SIZE(sdm845_vbif), > >>>>> + .vbif = sdm845_vbif, > >>>>> + .reg_dma_count = 1, > >>>>> + .dma_cfg = sm8150_regdma, > >>>>> + .perf = sc8180x_perf_data, > >>>>> + .mdss_irqs = IRQ_SC8180X_MASK, > >>>>> + }; > >>>>> +} > >>>>> + > >>>>> /* > >>>>> * sm8250_cfg_init(): populate sm8250 dpu sub-blocks reg offsets > >>>>> * and instance counts. > >>>>> @@ -1260,6 +1388,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = { > >>>>> { .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init}, > >>>>> { .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init}, > >>>>> { .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init}, > >>>>> + { .hw_rev = DPU_HW_VER_510, .cfg_init = sc8180x_cfg_init}, > >>>>> { .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init}, > >>>>> { .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init}, > >>>>> { .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init}, > >>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > >>>>> index 31af04afda7d..9572d29ff2ff 100644 > >>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > >>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > >>>>> @@ -39,6 +39,7 @@ > >>>>> #define DPU_HW_VER_410 DPU_HW_VER(4, 1, 0) /* sdm670 v1.0 */ > >>>>> #define DPU_HW_VER_500 DPU_HW_VER(5, 0, 0) /* sm8150 v1.0 */ > >>>>> #define DPU_HW_VER_501 DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */ > >>>>> +#define DPU_HW_VER_510 DPU_HW_VER(5, 1, 1) /* sc8180 */ > >>>>> #define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */ > >>>>> #define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */ > >>>>> #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */ > >>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > >>>>> index 47fe11a84a77..cedc631f8498 100644 > >>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > >>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > >>>>> @@ -1351,6 +1351,7 @@ const struct of_device_id dpu_dt_match[] = { > >>>>> { .compatible = "qcom,sdm845-dpu", }, > >>>>> { .compatible = "qcom,sc7180-dpu", }, > >>>>> { .compatible = "qcom,sc7280-dpu", }, > >>>>> + { .compatible = "qcom,sc8180x-dpu", }, > >>>>> { .compatible = "qcom,sm8150-dpu", }, > >>>>> { .compatible = "qcom,sm8250-dpu", }, > >>>>> {} > >>>>> diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c > >>>>> index 555666e3f960..0f441d358b60 100644 > >>>>> --- a/drivers/gpu/drm/msm/msm_drv.c > >>>>> +++ b/drivers/gpu/drm/msm/msm_drv.c > >>>>> @@ -1438,6 +1438,7 @@ static const struct of_device_id dt_match[] = { > >>>>> { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU }, > >>>>> { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU }, > >>>>> { .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU }, > >>>>> + { .compatible = "qcom,sc8180x-mdss", .data = (void *)KMS_DPU }, > >>>>> { .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU }, > >>>>> { .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU }, > >>>>> {} > > > > > >
On 2/15/2022 4:20 PM, Dmitry Baryshkov wrote: > On Tue, 15 Feb 2022 at 23:21, Abhinav Kumar <quic_abhinavk@quicinc.com> wrote: >> On 2/15/2022 10:42 AM, Dmitry Baryshkov wrote: >>> On Tue, 15 Feb 2022 at 20:42, Abhinav Kumar <quic_abhinavk@quicinc.com> wrote: >>>> On 2/15/2022 9:28 AM, Bjorn Andersson wrote: >>>>> On Tue 15 Feb 11:14 CST 2022, Abhinav Kumar wrote: >>>>> >>>>>> >>>>>> >>>>>> On 2/14/2022 8:33 PM, Bjorn Andersson wrote: >>>>>>> From: Rob Clark <robdclark@chromium.org> >>>>>>> >>>>>>> Add SC8180x to the hardware catalog, for initial support for the >>>>>>> platform. Due to limitations in the DP driver only one of the four DP >>>>>>> interfaces is left enabled. >>>>>>> >>>>>>> The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and >>>>>>> the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this >>>>>>> is flagged appropriately to ensure widebus is disabled - for now. >>>>>>> >>>>>>> Signed-off-by: Rob Clark <robdclark@chromium.org> >>>>>>> [bjorn: Reworked intf and irq definitions] >>>>>>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> >>>>>>> --- >>>>>>> >>>>>>> Changes since v1: >>>>>>> - Dropped widebus flag >>>>>>> >>>>>>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 129 ++++++++++++++++++ >>>>>>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + >>>>>>> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + >>>>>>> drivers/gpu/drm/msm/msm_drv.c | 1 + >>>>>>> 4 files changed, 132 insertions(+) >>>>>>> >>>>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>>>>>> index aa75991903a6..7ac0fe32df49 100644 >>>>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>>>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>>>>>> @@ -90,6 +90,17 @@ >>>>>>> BIT(MDP_INTF3_INTR) | \ >>>>>>> BIT(MDP_INTF4_INTR)) >>>>>>> +#define IRQ_SC8180X_MASK (BIT(MDP_SSPP_TOP0_INTR) | \ >>>>>>> + BIT(MDP_SSPP_TOP0_INTR2) | \ >>>>>>> + BIT(MDP_SSPP_TOP0_HIST_INTR) | \ >>>>>>> + BIT(MDP_INTF0_INTR) | \ >>>>>>> + BIT(MDP_INTF1_INTR) | \ >>>>>>> + BIT(MDP_INTF2_INTR) | \ >>>>>>> + BIT(MDP_INTF3_INTR) | \ >>>>>>> + BIT(MDP_INTF4_INTR) | \ >>>>>>> + BIT(MDP_INTF5_INTR) | \ >>>>>>> + BIT(MDP_AD4_0_INTR) | \ >>>>>>> + BIT(MDP_AD4_1_INTR)) >>>>>>> #define DEFAULT_PIXEL_RAM_SIZE (50 * 1024) >>>>>>> #define DEFAULT_DPU_LINE_WIDTH 2048 >>>>>>> @@ -225,6 +236,22 @@ static const struct dpu_caps sm8150_dpu_caps = { >>>>>>> .max_vdeci_exp = MAX_VERT_DECIMATION, >>>>>>> }; >>>>>>> +static const struct dpu_caps sc8180x_dpu_caps = { >>>>>>> + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, >>>>>>> + .max_mixer_blendstages = 0xb, >>>>>>> + .qseed_type = DPU_SSPP_SCALER_QSEED3, >>>>>>> + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */ >>>>>>> + .ubwc_version = DPU_HW_UBWC_VER_30, >>>>>>> + .has_src_split = true, >>>>>>> + .has_dim_layer = true, >>>>>>> + .has_idle_pc = true, >>>>>>> + .has_3d_merge = true, >>>>>>> + .max_linewidth = 4096, >>>>>>> + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, >>>>>>> + .max_hdeci_exp = MAX_HORZ_DECIMATION, >>>>>>> + .max_vdeci_exp = MAX_VERT_DECIMATION, >>>>>>> +}; >>>>>>> + >>>>>>> static const struct dpu_caps sm8250_dpu_caps = { >>>>>>> .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, >>>>>>> .max_mixer_blendstages = 0xb, >>>>>>> @@ -293,6 +320,31 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = { >>>>>>> }, >>>>>>> }; >>>>>>> +static const struct dpu_mdp_cfg sc8180x_mdp[] = { >>>>>>> + { >>>>>>> + .name = "top_0", .id = MDP_TOP, >>>>>>> + .base = 0x0, .len = 0x45C, >>>>>>> + .features = 0, >>>>>>> + .highest_bank_bit = 0x3, >>>>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { >>>>>>> + .reg_off = 0x2AC, .bit_off = 0}, >>>>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG1] = { >>>>>>> + .reg_off = 0x2B4, .bit_off = 0}, >>>>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG2] = { >>>>>>> + .reg_off = 0x2BC, .bit_off = 0}, >>>>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG3] = { >>>>>>> + .reg_off = 0x2C4, .bit_off = 0}, >>>>>>> + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { >>>>>>> + .reg_off = 0x2AC, .bit_off = 8}, >>>>>>> + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { >>>>>>> + .reg_off = 0x2B4, .bit_off = 8}, >>>>>>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { >>>>>>> + .reg_off = 0x2BC, .bit_off = 8}, >>>>>>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { >>>>>>> + .reg_off = 0x2C4, .bit_off = 8}, >>>>>>> + }, >>>>>>> +}; >>>>>>> + >>>>>>> static const struct dpu_mdp_cfg sm8250_mdp[] = { >>>>>>> { >>>>>>> .name = "top_0", .id = MDP_TOP, >>>>>>> @@ -861,6 +913,16 @@ static const struct dpu_intf_cfg sc7280_intf[] = { >>>>>>> INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), >>>>>>> }; >>>>>>> +static const struct dpu_intf_cfg sc8180x_intf[] = { >>>>>>> + INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25), >>>>>>> + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27), >>>>>>> + INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 28, 29), >>>>>>> + /* INTF_3 is for MST, wired to INTF_DP 0 and 1, use dummy index until this is supported */ >>>>>>> + INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 999, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 30, 31), >>>>>>> + INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 20, 21), >>>>>>> + INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23), >>>>>> >>>>>> This is a continued discussion from >>>>>> https://patchwork.freedesktop.org/patch/474179/. >>>>>> >>>>>> Shouldnt INTF_5 be marked as INTF_eDP? >>>>>> >>>>> >>>>> Might be, I didn't even know we had an INTF_EDP define... >>>>> >>>>> Is there any reason to distinguish DP and EDP in the DPU? I see sc7280 >>>>> doesn't distinguish the DP and EDP interfaces. >>>>> >>>>> Regards, >>>>> Bjorn >>>>> >>>> >>>> Like I have mentioned in the other patch, I think we have enough >>>> confusion between eDP and DP with the common driver. Since DPU does have >>>> separate interfaces I think we should fix that. >>>> >>>> Regarding sc7280 using INTF_DP, I synced up with Sankeerth. He referred >>>> to your change >>>> https://patchwork.freedesktop.org/patch/457776/?series=92992&rev=5 as it >>>> was posted earlier and ended up using the same INTF_DP macro. So its >>>> turning out to be a cyclical error. >>>> >>>> I think we should fix both. >>> >>> So, what is the value for DPU to distinguish between eDP and DP interfaces? >>> Would we get anything except the (intf_type == INTF_EDP || intf_type >>> == INTF_DP) instead of (intf_type == INTF_DP) in all the cases where >>> the type is checked? >> >> There are only two places currently where I am seeing this OR condition >> between INTF_DP and INTF_eDP. I do not have an example to give you today >> of where we would need to distinguish eDP and DP but I cannot guarantee >> we will not have such a case. >> >>> (thus leading us to cases when someone would forget to add INTF_EDP >>> next to INTF_DP) >>> >>> Also, if we are switching from INTF_DP to INTF_EDP, should we stop >>> using end-to-end numbering (like MSM_DP_CONTROLLER_2 for INTF_5) and >>> add a separate numbering scheme for INTF_EDP? >>> >> We should change the controller ID to match what it actually is. >> >> Now that you pointed this out, this looks even more confusing to me to >> say that MSM_DP_CONTROLLER_2 is actually a EDP controller because >> fundamentally and even hardware block wise they are different. > > So, do we split msm_priv->dp too? It's indexed using > MSM_DP_CONTROLLER_n entries. > Do we want to teach drm/msm/dp code that there are priv->dp[] and > priv->edp arrays? ok so now priv->dp and priv->edp arrays are also in the picture here :) Actually all these questions should have probably come when we were figuring out how best to re-use eDP and DP driver. Either way atleast, its good we are documenting all these questions on this thread so that anyone can refer this to know what all was missed out :) priv->dp is of type msm_dp. When re-using DP driver for eDP and since struct msm_dp is the shared struct between dpu and the msm/dp, I get your point of re-using MSM_DP_CONTROLLER_* as thats being use to index. So MSM_DP_CONTROLLER_* is more of an index into the DP driver and not really a hardware indexing scheme. If we split into two arrays, we need more changes to dpu_encoder too. Too instrusive a change at this point, even though probably correct. But are you seeing more changes required even if we just change INTF_DP to INTF_eDP for the eDP entries? What are the challenges there? > >> Why do we want to keep building something on top of this confusing >> terminology knowing that it can be corrected when its fairly in the >> development stage rather than realizing later it will break. >> >> We have only been discussing that eDP and DP are treated equally in the >> DPU code and hence why do we need to distinguish. >> >> As per current code yes, but I cannot and probably noone else can >> guarantee that in future there can be cases were we want to distinguish >> the two for something. > > Me too. For now I see INTF_DP as a useful abstraction for 'the > interface that's handled by drm/msm/dp and shares common timing > requirements'. struct msm_dp is the useful abstraction already for drm/msm/dp. Not INTF_DP. > > At this moment I estimate that splitting it properly into INTF_DP and > INTF_EDP can bring more troubles than possible future cases. Can you please elaborate why changing INTF_DP to INTF_eDP is more trouble if we leave the MSM_DP_CONTROLLER_* intact? > If at some point we were to distinguish DP and eDP usecases of > INTF_DP, I would suggest adding is_embedded property rather than > splitting away INTF_EDP. > Can you please elaborate on this is_embedded idea? > It's good to think about future cases and expansions. > But it's too easy to create a monstruosos constructs supporting all > possible features that no one can understand, grok and maintain. > Been there, created several of them, refactored others. > > Let me throw in yet-another-possible-if: if at some point the hardware > supported iDP using the same DP block, would you split INTF_iDP? > >> Thats the overally consensus within our team. >> >> So if this going to work smoothly by just fixing two entries in the hw >> catalog I would rather do that now rather than realizing this down the >> line again just to save usage of one more enum. >> >>> With all that in mind I'd suggest to: >>> - use INTF_DP for both DP and new eDP interfaces >>> - remove INTF_EDP usage from the dpu1 driver >>> - add a note that INTF_EDP corresponds to older eDP blocks (found on 8x74/8x84) >>> >>>> >>>>>>> +}; >>>>>>> + >>>>>>> /************************************************************* >>>>>>> * VBIF sub blocks config >>>>>>> *************************************************************/ >>>>>>> @@ -931,6 +993,10 @@ static const struct dpu_qos_lut_entry sm8150_qos_linear[] = { >>>>>>> {.fl = 0, .lut = 0x0011222222223357 }, >>>>>>> }; >>>>>>> +static const struct dpu_qos_lut_entry sc8180x_qos_linear[] = { >>>>>>> + {.fl = 4, .lut = 0x0000000000000357 }, >>>>>>> +}; >>>>>>> + >>>>>>> static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = { >>>>>>> {.fl = 10, .lut = 0x344556677}, >>>>>>> {.fl = 11, .lut = 0x3344556677}, >>>>>>> @@ -944,6 +1010,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_macrotile[] = { >>>>>>> {.fl = 0, .lut = 0x0011223344556677}, >>>>>>> }; >>>>>>> +static const struct dpu_qos_lut_entry sc8180x_qos_macrotile[] = { >>>>>>> + {.fl = 10, .lut = 0x0000000344556677}, >>>>>>> +}; >>>>>>> + >>>>>>> static const struct dpu_qos_lut_entry sdm845_qos_nrt[] = { >>>>>>> {.fl = 0, .lut = 0x0}, >>>>>>> }; >>>>>>> @@ -1045,6 +1115,33 @@ static const struct dpu_perf_cfg sm8150_perf_data = { >>>>>>> .bw_inefficiency_factor = 120, >>>>>>> }; >>>>>>> +static const struct dpu_perf_cfg sc8180x_perf_data = { >>>>>>> + .max_bw_low = 9600000, >>>>>>> + .max_bw_high = 9600000, >>>>>>> + .min_core_ib = 2400000, >>>>>>> + .min_llcc_ib = 800000, >>>>>>> + .min_dram_ib = 800000, >>>>>>> + .danger_lut_tbl = {0xf, 0xffff, 0x0, 0x0}, >>>>>>> + .qos_lut_tbl = { >>>>>>> + {.nentry = ARRAY_SIZE(sc8180x_qos_linear), >>>>>>> + .entries = sc8180x_qos_linear >>>>>>> + }, >>>>>>> + {.nentry = ARRAY_SIZE(sc8180x_qos_macrotile), >>>>>>> + .entries = sc8180x_qos_macrotile >>>>>>> + }, >>>>>>> + {.nentry = ARRAY_SIZE(sc7180_qos_nrt), >>>>>>> + .entries = sc7180_qos_nrt >>>>>>> + }, >>>>>>> + /* TODO: macrotile-qseed is different from macrotile */ >>>>>>> + }, >>>>>>> + .cdp_cfg = { >>>>>>> + {.rd_enable = 1, .wr_enable = 1}, >>>>>>> + {.rd_enable = 1, .wr_enable = 0} >>>>>>> + }, >>>>>>> + .clk_inefficiency_factor = 105, >>>>>>> + .bw_inefficiency_factor = 120, >>>>>>> +}; >>>>>>> + >>>>>>> static const struct dpu_perf_cfg sm8250_perf_data = { >>>>>>> .max_bw_low = 13700000, >>>>>>> .max_bw_high = 16600000, >>>>>>> @@ -1199,6 +1296,37 @@ static void sm8150_cfg_init(struct dpu_mdss_cfg *dpu_cfg) >>>>>>> }; >>>>>>> } >>>>>>> +/* >>>>>>> + * sc8180x_cfg_init(): populate sc8180 dpu sub-blocks reg offsets >>>>>>> + * and instance counts. >>>>>>> + */ >>>>>>> +static void sc8180x_cfg_init(struct dpu_mdss_cfg *dpu_cfg) >>>>>>> +{ >>>>>>> + *dpu_cfg = (struct dpu_mdss_cfg){ >>>>>>> + .caps = &sc8180x_dpu_caps, >>>>>>> + .mdp_count = ARRAY_SIZE(sc8180x_mdp), >>>>>>> + .mdp = sc8180x_mdp, >>>>>>> + .ctl_count = ARRAY_SIZE(sm8150_ctl), >>>>>>> + .ctl = sm8150_ctl, >>>>>>> + .sspp_count = ARRAY_SIZE(sdm845_sspp), >>>>>>> + .sspp = sdm845_sspp, >>>>>>> + .mixer_count = ARRAY_SIZE(sm8150_lm), >>>>>>> + .mixer = sm8150_lm, >>>>>>> + .pingpong_count = ARRAY_SIZE(sm8150_pp), >>>>>>> + .pingpong = sm8150_pp, >>>>>>> + .merge_3d_count = ARRAY_SIZE(sm8150_merge_3d), >>>>>>> + .merge_3d = sm8150_merge_3d, >>>>>>> + .intf_count = ARRAY_SIZE(sc8180x_intf), >>>>>>> + .intf = sc8180x_intf, >>>>>>> + .vbif_count = ARRAY_SIZE(sdm845_vbif), >>>>>>> + .vbif = sdm845_vbif, >>>>>>> + .reg_dma_count = 1, >>>>>>> + .dma_cfg = sm8150_regdma, >>>>>>> + .perf = sc8180x_perf_data, >>>>>>> + .mdss_irqs = IRQ_SC8180X_MASK, >>>>>>> + }; >>>>>>> +} >>>>>>> + >>>>>>> /* >>>>>>> * sm8250_cfg_init(): populate sm8250 dpu sub-blocks reg offsets >>>>>>> * and instance counts. >>>>>>> @@ -1260,6 +1388,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = { >>>>>>> { .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init}, >>>>>>> { .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init}, >>>>>>> { .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init}, >>>>>>> + { .hw_rev = DPU_HW_VER_510, .cfg_init = sc8180x_cfg_init}, >>>>>>> { .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init}, >>>>>>> { .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init}, >>>>>>> { .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init}, >>>>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h >>>>>>> index 31af04afda7d..9572d29ff2ff 100644 >>>>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h >>>>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h >>>>>>> @@ -39,6 +39,7 @@ >>>>>>> #define DPU_HW_VER_410 DPU_HW_VER(4, 1, 0) /* sdm670 v1.0 */ >>>>>>> #define DPU_HW_VER_500 DPU_HW_VER(5, 0, 0) /* sm8150 v1.0 */ >>>>>>> #define DPU_HW_VER_501 DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */ >>>>>>> +#define DPU_HW_VER_510 DPU_HW_VER(5, 1, 1) /* sc8180 */ >>>>>>> #define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */ >>>>>>> #define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */ >>>>>>> #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */ >>>>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c >>>>>>> index 47fe11a84a77..cedc631f8498 100644 >>>>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c >>>>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c >>>>>>> @@ -1351,6 +1351,7 @@ const struct of_device_id dpu_dt_match[] = { >>>>>>> { .compatible = "qcom,sdm845-dpu", }, >>>>>>> { .compatible = "qcom,sc7180-dpu", }, >>>>>>> { .compatible = "qcom,sc7280-dpu", }, >>>>>>> + { .compatible = "qcom,sc8180x-dpu", }, >>>>>>> { .compatible = "qcom,sm8150-dpu", }, >>>>>>> { .compatible = "qcom,sm8250-dpu", }, >>>>>>> {} >>>>>>> diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c >>>>>>> index 555666e3f960..0f441d358b60 100644 >>>>>>> --- a/drivers/gpu/drm/msm/msm_drv.c >>>>>>> +++ b/drivers/gpu/drm/msm/msm_drv.c >>>>>>> @@ -1438,6 +1438,7 @@ static const struct of_device_id dt_match[] = { >>>>>>> { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU }, >>>>>>> { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU }, >>>>>>> { .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU }, >>>>>>> + { .compatible = "qcom,sc8180x-mdss", .data = (void *)KMS_DPU }, >>>>>>> { .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU }, >>>>>>> { .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU }, >>>>>>> {} >>> >>> >>> > > >
On Tue 15 Feb 19:34 CST 2022, Abhinav Kumar wrote: > > > On 2/15/2022 4:20 PM, Dmitry Baryshkov wrote: > > On Tue, 15 Feb 2022 at 23:21, Abhinav Kumar <quic_abhinavk@quicinc.com> wrote: > > > On 2/15/2022 10:42 AM, Dmitry Baryshkov wrote: > > > > On Tue, 15 Feb 2022 at 20:42, Abhinav Kumar <quic_abhinavk@quicinc.com> wrote: > > > > > On 2/15/2022 9:28 AM, Bjorn Andersson wrote: > > > > > > On Tue 15 Feb 11:14 CST 2022, Abhinav Kumar wrote: > > > > > > > On 2/14/2022 8:33 PM, Bjorn Andersson wrote: > > > > > > > > From: Rob Clark <robdclark@chromium.org> [..] > > > > (thus leading us to cases when someone would forget to add INTF_EDP > > > > next to INTF_DP) > > > > > > > > Also, if we are switching from INTF_DP to INTF_EDP, should we stop > > > > using end-to-end numbering (like MSM_DP_CONTROLLER_2 for INTF_5) and > > > > add a separate numbering scheme for INTF_EDP? > > > > > > > We should change the controller ID to match what it actually is. > > > > > > Now that you pointed this out, this looks even more confusing to me to > > > say that MSM_DP_CONTROLLER_2 is actually a EDP controller because > > > fundamentally and even hardware block wise they are different. > > > > So, do we split msm_priv->dp too? It's indexed using > > MSM_DP_CONTROLLER_n entries. > > Do we want to teach drm/msm/dp code that there are priv->dp[] and > > priv->edp arrays? > > ok so now priv->dp and priv->edp arrays are also in the picture here :) > > Actually all these questions should have probably come when we were figuring > out how best to re-use eDP and DP driver. > > Either way atleast, its good we are documenting all these questions on this > thread so that anyone can refer this to know what all was missed out :) > > priv->dp is of type msm_dp. When re-using DP driver for eDP and since > struct msm_dp is the shared struct between dpu and the msm/dp, I get your > point of re-using MSM_DP_CONTROLLER_* as thats being use to index. > > So MSM_DP_CONTROLLER_* is more of an index into the DP driver and not really > a hardware indexing scheme. > > If we split into two arrays, we need more changes to dpu_encoder too. > > Too instrusive a change at this point, even though probably correct. > I'm sorry, but performing such a split would create a whole bunch of duplication and I don't see the reasons yet. Can you please give me an example of when the DPU _code_ would benefit from being specifically written for EDP vs DP? Things where it doesn't make sense to enable certain features in runtime - but really have different implementation for the two interface types. > But are you seeing more changes required even if we just change INTF_DP to > INTF_eDP for the eDP entries? What are the challenges there? > What are the benefits? Regards, Bjorn
On Tue 15 Feb 11:42 CST 2022, Abhinav Kumar wrote: > > > On 2/15/2022 9:28 AM, Bjorn Andersson wrote: > > On Tue 15 Feb 11:14 CST 2022, Abhinav Kumar wrote: > > > > > > > > > > > On 2/14/2022 8:33 PM, Bjorn Andersson wrote: > > > > From: Rob Clark <robdclark@chromium.org> > > > > > > > > Add SC8180x to the hardware catalog, for initial support for the > > > > platform. Due to limitations in the DP driver only one of the four DP > > > > interfaces is left enabled. > > > > > > > > The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and > > > > the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this > > > > is flagged appropriately to ensure widebus is disabled - for now. > > > > > > > > Signed-off-by: Rob Clark <robdclark@chromium.org> > > > > [bjorn: Reworked intf and irq definitions] > > > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > > > --- > > > > > > > > Changes since v1: > > > > - Dropped widebus flag > > > > > > > > .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 129 ++++++++++++++++++ > > > > .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + > > > > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + > > > > drivers/gpu/drm/msm/msm_drv.c | 1 + > > > > 4 files changed, 132 insertions(+) > > > > > > > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > > > > index aa75991903a6..7ac0fe32df49 100644 > > > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > > > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > > > > @@ -90,6 +90,17 @@ > > > > BIT(MDP_INTF3_INTR) | \ > > > > BIT(MDP_INTF4_INTR)) > > > > +#define IRQ_SC8180X_MASK (BIT(MDP_SSPP_TOP0_INTR) | \ > > > > + BIT(MDP_SSPP_TOP0_INTR2) | \ > > > > + BIT(MDP_SSPP_TOP0_HIST_INTR) | \ > > > > + BIT(MDP_INTF0_INTR) | \ > > > > + BIT(MDP_INTF1_INTR) | \ > > > > + BIT(MDP_INTF2_INTR) | \ > > > > + BIT(MDP_INTF3_INTR) | \ > > > > + BIT(MDP_INTF4_INTR) | \ > > > > + BIT(MDP_INTF5_INTR) | \ > > > > + BIT(MDP_AD4_0_INTR) | \ > > > > + BIT(MDP_AD4_1_INTR)) > > > > #define DEFAULT_PIXEL_RAM_SIZE (50 * 1024) > > > > #define DEFAULT_DPU_LINE_WIDTH 2048 > > > > @@ -225,6 +236,22 @@ static const struct dpu_caps sm8150_dpu_caps = { > > > > .max_vdeci_exp = MAX_VERT_DECIMATION, > > > > }; > > > > +static const struct dpu_caps sc8180x_dpu_caps = { > > > > + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, > > > > + .max_mixer_blendstages = 0xb, > > > > + .qseed_type = DPU_SSPP_SCALER_QSEED3, > > > > + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */ > > > > + .ubwc_version = DPU_HW_UBWC_VER_30, > > > > + .has_src_split = true, > > > > + .has_dim_layer = true, > > > > + .has_idle_pc = true, > > > > + .has_3d_merge = true, > > > > + .max_linewidth = 4096, > > > > + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, > > > > + .max_hdeci_exp = MAX_HORZ_DECIMATION, > > > > + .max_vdeci_exp = MAX_VERT_DECIMATION, > > > > +}; > > > > + > > > > static const struct dpu_caps sm8250_dpu_caps = { > > > > .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, > > > > .max_mixer_blendstages = 0xb, > > > > @@ -293,6 +320,31 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = { > > > > }, > > > > }; > > > > +static const struct dpu_mdp_cfg sc8180x_mdp[] = { > > > > + { > > > > + .name = "top_0", .id = MDP_TOP, > > > > + .base = 0x0, .len = 0x45C, > > > > + .features = 0, > > > > + .highest_bank_bit = 0x3, > > > > + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { > > > > + .reg_off = 0x2AC, .bit_off = 0}, > > > > + .clk_ctrls[DPU_CLK_CTRL_VIG1] = { > > > > + .reg_off = 0x2B4, .bit_off = 0}, > > > > + .clk_ctrls[DPU_CLK_CTRL_VIG2] = { > > > > + .reg_off = 0x2BC, .bit_off = 0}, > > > > + .clk_ctrls[DPU_CLK_CTRL_VIG3] = { > > > > + .reg_off = 0x2C4, .bit_off = 0}, > > > > + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { > > > > + .reg_off = 0x2AC, .bit_off = 8}, > > > > + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { > > > > + .reg_off = 0x2B4, .bit_off = 8}, > > > > + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { > > > > + .reg_off = 0x2BC, .bit_off = 8}, > > > > + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { > > > > + .reg_off = 0x2C4, .bit_off = 8}, > > > > + }, > > > > +}; > > > > + > > > > static const struct dpu_mdp_cfg sm8250_mdp[] = { > > > > { > > > > .name = "top_0", .id = MDP_TOP, > > > > @@ -861,6 +913,16 @@ static const struct dpu_intf_cfg sc7280_intf[] = { > > > > INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), > > > > }; > > > > +static const struct dpu_intf_cfg sc8180x_intf[] = { > > > > + INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25), > > > > + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27), > > > > + INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 28, 29), > > > > + /* INTF_3 is for MST, wired to INTF_DP 0 and 1, use dummy index until this is supported */ > > > > + INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 999, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 30, 31), > > > > + INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 20, 21), > > > > + INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23), > > > > > > This is a continued discussion from > > > https://patchwork.freedesktop.org/patch/474179/. > > > > > > Shouldnt INTF_5 be marked as INTF_eDP? > > > > > > > Might be, I didn't even know we had an INTF_EDP define... > > > > Is there any reason to distinguish DP and EDP in the DPU? I see sc7280 > > doesn't distinguish the DP and EDP interfaces. > > > > Regards, > > Bjorn > > > > Like I have mentioned in the other patch, I think we have enough confusion > between eDP and DP with the common driver. Since DPU does have separate > interfaces I think we should fix that. > > Regarding sc7280 using INTF_DP, I synced up with Sankeerth. He referred to > your change > https://patchwork.freedesktop.org/patch/457776/?series=92992&rev=5 as it was > posted earlier and ended up using the same INTF_DP macro. So its turning out > to be a cyclical error. > That made me take a second look at the HPG, and sure enough INTF_5 on SC7280 is connected to a eDP/DP Combo PHY. We have the same setup in SC8280XP. In SC8180X, INTF_5 is documented as being connected to a eDP (only) PHY, so perhaps it makes sense to do it there, but for the others its wrong. Regards, Bjorn
On 2/15/2022 6:03 PM, Bjorn Andersson wrote: > On Tue 15 Feb 19:34 CST 2022, Abhinav Kumar wrote: > >> >> >> On 2/15/2022 4:20 PM, Dmitry Baryshkov wrote: >>> On Tue, 15 Feb 2022 at 23:21, Abhinav Kumar <quic_abhinavk@quicinc.com> wrote: >>>> On 2/15/2022 10:42 AM, Dmitry Baryshkov wrote: >>>>> On Tue, 15 Feb 2022 at 20:42, Abhinav Kumar <quic_abhinavk@quicinc.com> wrote: >>>>>> On 2/15/2022 9:28 AM, Bjorn Andersson wrote: >>>>>>> On Tue 15 Feb 11:14 CST 2022, Abhinav Kumar wrote: >>>>>>>> On 2/14/2022 8:33 PM, Bjorn Andersson wrote: >>>>>>>>> From: Rob Clark <robdclark@chromium.org> > [..] >>>>> (thus leading us to cases when someone would forget to add INTF_EDP >>>>> next to INTF_DP) >>>>> >>>>> Also, if we are switching from INTF_DP to INTF_EDP, should we stop >>>>> using end-to-end numbering (like MSM_DP_CONTROLLER_2 for INTF_5) and >>>>> add a separate numbering scheme for INTF_EDP? >>>>> >>>> We should change the controller ID to match what it actually is. >>>> >>>> Now that you pointed this out, this looks even more confusing to me to >>>> say that MSM_DP_CONTROLLER_2 is actually a EDP controller because >>>> fundamentally and even hardware block wise they are different. >>> >>> So, do we split msm_priv->dp too? It's indexed using >>> MSM_DP_CONTROLLER_n entries. >>> Do we want to teach drm/msm/dp code that there are priv->dp[] and >>> priv->edp arrays? >> >> ok so now priv->dp and priv->edp arrays are also in the picture here :) >> >> Actually all these questions should have probably come when we were figuring >> out how best to re-use eDP and DP driver. >> >> Either way atleast, its good we are documenting all these questions on this >> thread so that anyone can refer this to know what all was missed out :) >> >> priv->dp is of type msm_dp. When re-using DP driver for eDP and since >> struct msm_dp is the shared struct between dpu and the msm/dp, I get your >> point of re-using MSM_DP_CONTROLLER_* as thats being use to index. >> >> So MSM_DP_CONTROLLER_* is more of an index into the DP driver and not really >> a hardware indexing scheme. >> >> If we split into two arrays, we need more changes to dpu_encoder too. >> >> Too instrusive a change at this point, even though probably correct. >> > > I'm sorry, but performing such a split would create a whole bunch of > duplication and I don't see the reasons yet. Can you please give me an > example of when the DPU _code_ would benefit from being specifically > written for EDP vs DP? > > Things where it doesn't make sense to enable certain features in > runtime - but really have different implementation for the two interface > types. > Like I have mentioned in my previous comment, this would be a big change and I am also not in favor of this big change. >> But are you seeing more changes required even if we just change INTF_DP to >> INTF_eDP for the eDP entries? What are the challenges there? >> > > What are the benefits? In terms of current code, again like I said before in my previous comments several times I do not have an example. I was keeping the separation in case in future for some features we do need to differentiate eDP and DP. Somehow I also feel this change and below are interlinked that way. https://patchwork.freedesktop.org/patch/473871/ The only reason we need this change is because both eDP and DP use DRM_MODE_ENCODER_TMDS and specifying the intf_type directly will clear the confusion because DRM_MODE_ENCODER_DSI means DSI and DRM_MODE_ENCODER_VIRTUAL means Writeback but DRM_MODE_ENCODER_TMDS can mean DP OR eDP interface. The ambiguity was always for eDP and DP. That led to the discussion about the INTF_* we are specifying in the dpu_hw_catalog only to find the discrepancy. So now by clearing that ambiguity that change makes sense. That discussion trickled into this one. > > Regards, > Bjorn
On 2/15/2022 6:14 PM, Bjorn Andersson wrote: > On Tue 15 Feb 11:42 CST 2022, Abhinav Kumar wrote: > >> >> >> On 2/15/2022 9:28 AM, Bjorn Andersson wrote: >>> On Tue 15 Feb 11:14 CST 2022, Abhinav Kumar wrote: >>> >>>> >>>> >>>> On 2/14/2022 8:33 PM, Bjorn Andersson wrote: >>>>> From: Rob Clark <robdclark@chromium.org> >>>>> >>>>> Add SC8180x to the hardware catalog, for initial support for the >>>>> platform. Due to limitations in the DP driver only one of the four DP >>>>> interfaces is left enabled. >>>>> >>>>> The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and >>>>> the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this >>>>> is flagged appropriately to ensure widebus is disabled - for now. >>>>> >>>>> Signed-off-by: Rob Clark <robdclark@chromium.org> >>>>> [bjorn: Reworked intf and irq definitions] >>>>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> >>>>> --- >>>>> >>>>> Changes since v1: >>>>> - Dropped widebus flag >>>>> >>>>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 129 ++++++++++++++++++ >>>>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + >>>>> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + >>>>> drivers/gpu/drm/msm/msm_drv.c | 1 + >>>>> 4 files changed, 132 insertions(+) >>>>> >>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>>>> index aa75991903a6..7ac0fe32df49 100644 >>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>>>> @@ -90,6 +90,17 @@ >>>>> BIT(MDP_INTF3_INTR) | \ >>>>> BIT(MDP_INTF4_INTR)) >>>>> +#define IRQ_SC8180X_MASK (BIT(MDP_SSPP_TOP0_INTR) | \ >>>>> + BIT(MDP_SSPP_TOP0_INTR2) | \ >>>>> + BIT(MDP_SSPP_TOP0_HIST_INTR) | \ >>>>> + BIT(MDP_INTF0_INTR) | \ >>>>> + BIT(MDP_INTF1_INTR) | \ >>>>> + BIT(MDP_INTF2_INTR) | \ >>>>> + BIT(MDP_INTF3_INTR) | \ >>>>> + BIT(MDP_INTF4_INTR) | \ >>>>> + BIT(MDP_INTF5_INTR) | \ >>>>> + BIT(MDP_AD4_0_INTR) | \ >>>>> + BIT(MDP_AD4_1_INTR)) >>>>> #define DEFAULT_PIXEL_RAM_SIZE (50 * 1024) >>>>> #define DEFAULT_DPU_LINE_WIDTH 2048 >>>>> @@ -225,6 +236,22 @@ static const struct dpu_caps sm8150_dpu_caps = { >>>>> .max_vdeci_exp = MAX_VERT_DECIMATION, >>>>> }; >>>>> +static const struct dpu_caps sc8180x_dpu_caps = { >>>>> + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, >>>>> + .max_mixer_blendstages = 0xb, >>>>> + .qseed_type = DPU_SSPP_SCALER_QSEED3, >>>>> + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */ >>>>> + .ubwc_version = DPU_HW_UBWC_VER_30, >>>>> + .has_src_split = true, >>>>> + .has_dim_layer = true, >>>>> + .has_idle_pc = true, >>>>> + .has_3d_merge = true, >>>>> + .max_linewidth = 4096, >>>>> + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, >>>>> + .max_hdeci_exp = MAX_HORZ_DECIMATION, >>>>> + .max_vdeci_exp = MAX_VERT_DECIMATION, >>>>> +}; >>>>> + >>>>> static const struct dpu_caps sm8250_dpu_caps = { >>>>> .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, >>>>> .max_mixer_blendstages = 0xb, >>>>> @@ -293,6 +320,31 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = { >>>>> }, >>>>> }; >>>>> +static const struct dpu_mdp_cfg sc8180x_mdp[] = { >>>>> + { >>>>> + .name = "top_0", .id = MDP_TOP, >>>>> + .base = 0x0, .len = 0x45C, >>>>> + .features = 0, >>>>> + .highest_bank_bit = 0x3, >>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { >>>>> + .reg_off = 0x2AC, .bit_off = 0}, >>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG1] = { >>>>> + .reg_off = 0x2B4, .bit_off = 0}, >>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG2] = { >>>>> + .reg_off = 0x2BC, .bit_off = 0}, >>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG3] = { >>>>> + .reg_off = 0x2C4, .bit_off = 0}, >>>>> + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { >>>>> + .reg_off = 0x2AC, .bit_off = 8}, >>>>> + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { >>>>> + .reg_off = 0x2B4, .bit_off = 8}, >>>>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { >>>>> + .reg_off = 0x2BC, .bit_off = 8}, >>>>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { >>>>> + .reg_off = 0x2C4, .bit_off = 8}, >>>>> + }, >>>>> +}; >>>>> + >>>>> static const struct dpu_mdp_cfg sm8250_mdp[] = { >>>>> { >>>>> .name = "top_0", .id = MDP_TOP, >>>>> @@ -861,6 +913,16 @@ static const struct dpu_intf_cfg sc7280_intf[] = { >>>>> INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), >>>>> }; >>>>> +static const struct dpu_intf_cfg sc8180x_intf[] = { >>>>> + INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25), >>>>> + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27), >>>>> + INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 28, 29), >>>>> + /* INTF_3 is for MST, wired to INTF_DP 0 and 1, use dummy index until this is supported */ >>>>> + INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 999, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 30, 31), >>>>> + INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 20, 21), >>>>> + INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23), >>>> >>>> This is a continued discussion from >>>> https://patchwork.freedesktop.org/patch/474179/. >>>> >>>> Shouldnt INTF_5 be marked as INTF_eDP? >>>> >>> >>> Might be, I didn't even know we had an INTF_EDP define... >>> >>> Is there any reason to distinguish DP and EDP in the DPU? I see sc7280 >>> doesn't distinguish the DP and EDP interfaces. >>> >>> Regards, >>> Bjorn >>> >> >> Like I have mentioned in the other patch, I think we have enough confusion >> between eDP and DP with the common driver. Since DPU does have separate >> interfaces I think we should fix that. >> >> Regarding sc7280 using INTF_DP, I synced up with Sankeerth. He referred to >> your change >> https://patchwork.freedesktop.org/patch/457776/?series=92992&rev=5 as it was >> posted earlier and ended up using the same INTF_DP macro. So its turning out >> to be a cyclical error. >> > > That made me take a second look at the HPG, and sure enough INTF_5 on > SC7280 is connected to a eDP/DP Combo PHY. We have the same setup in > SC8280XP. > > In SC8180X, INTF_5 is documented as being connected to a eDP (only) PHY, > so perhaps it makes sense to do it there, but for the others its wrong. > Here you are specifying the controller in the catalog. So independent of the PHY thats being used, shouldnt this remain INTF_eDP? > Regards, > Bjorn
On Tue 15 Feb 20:38 CST 2022, Abhinav Kumar wrote: > > > On 2/15/2022 6:14 PM, Bjorn Andersson wrote: > > On Tue 15 Feb 11:42 CST 2022, Abhinav Kumar wrote: > > > > > > > > > > > On 2/15/2022 9:28 AM, Bjorn Andersson wrote: > > > > On Tue 15 Feb 11:14 CST 2022, Abhinav Kumar wrote: > > > > > > > > > > > > > > > > > > > On 2/14/2022 8:33 PM, Bjorn Andersson wrote: > > > > > > From: Rob Clark <robdclark@chromium.org> > > > > > > > > > > > > Add SC8180x to the hardware catalog, for initial support for the > > > > > > platform. Due to limitations in the DP driver only one of the four DP > > > > > > interfaces is left enabled. > > > > > > > > > > > > The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and > > > > > > the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this > > > > > > is flagged appropriately to ensure widebus is disabled - for now. > > > > > > > > > > > > Signed-off-by: Rob Clark <robdclark@chromium.org> > > > > > > [bjorn: Reworked intf and irq definitions] > > > > > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > > > > > --- > > > > > > > > > > > > Changes since v1: > > > > > > - Dropped widebus flag > > > > > > > > > > > > .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 129 ++++++++++++++++++ > > > > > > .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + > > > > > > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + > > > > > > drivers/gpu/drm/msm/msm_drv.c | 1 + > > > > > > 4 files changed, 132 insertions(+) > > > > > > > > > > > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > > > > > > index aa75991903a6..7ac0fe32df49 100644 > > > > > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > > > > > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > > > > > > @@ -90,6 +90,17 @@ > > > > > > BIT(MDP_INTF3_INTR) | \ > > > > > > BIT(MDP_INTF4_INTR)) > > > > > > +#define IRQ_SC8180X_MASK (BIT(MDP_SSPP_TOP0_INTR) | \ > > > > > > + BIT(MDP_SSPP_TOP0_INTR2) | \ > > > > > > + BIT(MDP_SSPP_TOP0_HIST_INTR) | \ > > > > > > + BIT(MDP_INTF0_INTR) | \ > > > > > > + BIT(MDP_INTF1_INTR) | \ > > > > > > + BIT(MDP_INTF2_INTR) | \ > > > > > > + BIT(MDP_INTF3_INTR) | \ > > > > > > + BIT(MDP_INTF4_INTR) | \ > > > > > > + BIT(MDP_INTF5_INTR) | \ > > > > > > + BIT(MDP_AD4_0_INTR) | \ > > > > > > + BIT(MDP_AD4_1_INTR)) > > > > > > #define DEFAULT_PIXEL_RAM_SIZE (50 * 1024) > > > > > > #define DEFAULT_DPU_LINE_WIDTH 2048 > > > > > > @@ -225,6 +236,22 @@ static const struct dpu_caps sm8150_dpu_caps = { > > > > > > .max_vdeci_exp = MAX_VERT_DECIMATION, > > > > > > }; > > > > > > +static const struct dpu_caps sc8180x_dpu_caps = { > > > > > > + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, > > > > > > + .max_mixer_blendstages = 0xb, > > > > > > + .qseed_type = DPU_SSPP_SCALER_QSEED3, > > > > > > + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */ > > > > > > + .ubwc_version = DPU_HW_UBWC_VER_30, > > > > > > + .has_src_split = true, > > > > > > + .has_dim_layer = true, > > > > > > + .has_idle_pc = true, > > > > > > + .has_3d_merge = true, > > > > > > + .max_linewidth = 4096, > > > > > > + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, > > > > > > + .max_hdeci_exp = MAX_HORZ_DECIMATION, > > > > > > + .max_vdeci_exp = MAX_VERT_DECIMATION, > > > > > > +}; > > > > > > + > > > > > > static const struct dpu_caps sm8250_dpu_caps = { > > > > > > .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, > > > > > > .max_mixer_blendstages = 0xb, > > > > > > @@ -293,6 +320,31 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = { > > > > > > }, > > > > > > }; > > > > > > +static const struct dpu_mdp_cfg sc8180x_mdp[] = { > > > > > > + { > > > > > > + .name = "top_0", .id = MDP_TOP, > > > > > > + .base = 0x0, .len = 0x45C, > > > > > > + .features = 0, > > > > > > + .highest_bank_bit = 0x3, > > > > > > + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { > > > > > > + .reg_off = 0x2AC, .bit_off = 0}, > > > > > > + .clk_ctrls[DPU_CLK_CTRL_VIG1] = { > > > > > > + .reg_off = 0x2B4, .bit_off = 0}, > > > > > > + .clk_ctrls[DPU_CLK_CTRL_VIG2] = { > > > > > > + .reg_off = 0x2BC, .bit_off = 0}, > > > > > > + .clk_ctrls[DPU_CLK_CTRL_VIG3] = { > > > > > > + .reg_off = 0x2C4, .bit_off = 0}, > > > > > > + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { > > > > > > + .reg_off = 0x2AC, .bit_off = 8}, > > > > > > + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { > > > > > > + .reg_off = 0x2B4, .bit_off = 8}, > > > > > > + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { > > > > > > + .reg_off = 0x2BC, .bit_off = 8}, > > > > > > + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { > > > > > > + .reg_off = 0x2C4, .bit_off = 8}, > > > > > > + }, > > > > > > +}; > > > > > > + > > > > > > static const struct dpu_mdp_cfg sm8250_mdp[] = { > > > > > > { > > > > > > .name = "top_0", .id = MDP_TOP, > > > > > > @@ -861,6 +913,16 @@ static const struct dpu_intf_cfg sc7280_intf[] = { > > > > > > INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), > > > > > > }; > > > > > > +static const struct dpu_intf_cfg sc8180x_intf[] = { > > > > > > + INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25), > > > > > > + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27), > > > > > > + INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 28, 29), > > > > > > + /* INTF_3 is for MST, wired to INTF_DP 0 and 1, use dummy index until this is supported */ > > > > > > + INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 999, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 30, 31), > > > > > > + INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 20, 21), > > > > > > + INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23), > > > > > > > > > > This is a continued discussion from > > > > > https://patchwork.freedesktop.org/patch/474179/. > > > > > > > > > > Shouldnt INTF_5 be marked as INTF_eDP? > > > > > > > > > > > > > Might be, I didn't even know we had an INTF_EDP define... > > > > > > > > Is there any reason to distinguish DP and EDP in the DPU? I see sc7280 > > > > doesn't distinguish the DP and EDP interfaces. > > > > > > > > Regards, > > > > Bjorn > > > > > > > > > > Like I have mentioned in the other patch, I think we have enough confusion > > > between eDP and DP with the common driver. Since DPU does have separate > > > interfaces I think we should fix that. > > > > > > Regarding sc7280 using INTF_DP, I synced up with Sankeerth. He referred to > > > your change > > > https://patchwork.freedesktop.org/patch/457776/?series=92992&rev=5 as it was > > > posted earlier and ended up using the same INTF_DP macro. So its turning out > > > to be a cyclical error. > > > > > > > That made me take a second look at the HPG, and sure enough INTF_5 on > > SC7280 is connected to a eDP/DP Combo PHY. We have the same setup in > > SC8280XP. > > > > In SC8180X, INTF_5 is documented as being connected to a eDP (only) PHY, > > so perhaps it makes sense to do it there, but for the others its wrong. > > > > Here you are specifying the controller in the catalog. No, I'm specifying the type of the INTF. We then use the type of the intf and the index to match that to a particular DP TX block. > So independent of the PHY thats being used, shouldnt this remain > INTF_eDP? > I don't think it's going to help anyone to say that an interface connected to a PHY that can be either DP or EDP, should be INTF_EDP. People are going to make assumptions in the code such as INTF_EDP does not have audio and then someone designs a board based on SC7280 with DP output where they expect audio. Or assumptions about HPD, panel etc... I'm not saying that we have all the details figured out on how that's going to be controlled, but until there's a reason to distinguish INTF_DP from INTF_EDP I think we should not make one up. And I don't see that those differences should be hard coded in the DPU driver. If it's confusing to people that DP might be driving an EDP output, then perhaps we can just name it TMDS again? ;) Regards, Bjorn
On 2/15/2022 9:14 PM, Bjorn Andersson wrote: > On Tue 15 Feb 20:38 CST 2022, Abhinav Kumar wrote: > >> >> >> On 2/15/2022 6:14 PM, Bjorn Andersson wrote: >>> On Tue 15 Feb 11:42 CST 2022, Abhinav Kumar wrote: >>> >>>> >>>> >>>> On 2/15/2022 9:28 AM, Bjorn Andersson wrote: >>>>> On Tue 15 Feb 11:14 CST 2022, Abhinav Kumar wrote: >>>>> >>>>>> >>>>>> >>>>>> On 2/14/2022 8:33 PM, Bjorn Andersson wrote: >>>>>>> From: Rob Clark <robdclark@chromium.org> >>>>>>> >>>>>>> Add SC8180x to the hardware catalog, for initial support for the >>>>>>> platform. Due to limitations in the DP driver only one of the four DP >>>>>>> interfaces is left enabled. >>>>>>> >>>>>>> The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and >>>>>>> the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this >>>>>>> is flagged appropriately to ensure widebus is disabled - for now. >>>>>>> >>>>>>> Signed-off-by: Rob Clark <robdclark@chromium.org> >>>>>>> [bjorn: Reworked intf and irq definitions] >>>>>>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> >>>>>>> --- >>>>>>> >>>>>>> Changes since v1: >>>>>>> - Dropped widebus flag >>>>>>> >>>>>>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 129 ++++++++++++++++++ >>>>>>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + >>>>>>> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + >>>>>>> drivers/gpu/drm/msm/msm_drv.c | 1 + >>>>>>> 4 files changed, 132 insertions(+) >>>>>>> >>>>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>>>>>> index aa75991903a6..7ac0fe32df49 100644 >>>>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>>>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>>>>>> @@ -90,6 +90,17 @@ >>>>>>> BIT(MDP_INTF3_INTR) | \ >>>>>>> BIT(MDP_INTF4_INTR)) >>>>>>> +#define IRQ_SC8180X_MASK (BIT(MDP_SSPP_TOP0_INTR) | \ >>>>>>> + BIT(MDP_SSPP_TOP0_INTR2) | \ >>>>>>> + BIT(MDP_SSPP_TOP0_HIST_INTR) | \ >>>>>>> + BIT(MDP_INTF0_INTR) | \ >>>>>>> + BIT(MDP_INTF1_INTR) | \ >>>>>>> + BIT(MDP_INTF2_INTR) | \ >>>>>>> + BIT(MDP_INTF3_INTR) | \ >>>>>>> + BIT(MDP_INTF4_INTR) | \ >>>>>>> + BIT(MDP_INTF5_INTR) | \ >>>>>>> + BIT(MDP_AD4_0_INTR) | \ >>>>>>> + BIT(MDP_AD4_1_INTR)) >>>>>>> #define DEFAULT_PIXEL_RAM_SIZE (50 * 1024) >>>>>>> #define DEFAULT_DPU_LINE_WIDTH 2048 >>>>>>> @@ -225,6 +236,22 @@ static const struct dpu_caps sm8150_dpu_caps = { >>>>>>> .max_vdeci_exp = MAX_VERT_DECIMATION, >>>>>>> }; >>>>>>> +static const struct dpu_caps sc8180x_dpu_caps = { >>>>>>> + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, >>>>>>> + .max_mixer_blendstages = 0xb, >>>>>>> + .qseed_type = DPU_SSPP_SCALER_QSEED3, >>>>>>> + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */ >>>>>>> + .ubwc_version = DPU_HW_UBWC_VER_30, >>>>>>> + .has_src_split = true, >>>>>>> + .has_dim_layer = true, >>>>>>> + .has_idle_pc = true, >>>>>>> + .has_3d_merge = true, >>>>>>> + .max_linewidth = 4096, >>>>>>> + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, >>>>>>> + .max_hdeci_exp = MAX_HORZ_DECIMATION, >>>>>>> + .max_vdeci_exp = MAX_VERT_DECIMATION, >>>>>>> +}; >>>>>>> + >>>>>>> static const struct dpu_caps sm8250_dpu_caps = { >>>>>>> .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, >>>>>>> .max_mixer_blendstages = 0xb, >>>>>>> @@ -293,6 +320,31 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = { >>>>>>> }, >>>>>>> }; >>>>>>> +static const struct dpu_mdp_cfg sc8180x_mdp[] = { >>>>>>> + { >>>>>>> + .name = "top_0", .id = MDP_TOP, >>>>>>> + .base = 0x0, .len = 0x45C, >>>>>>> + .features = 0, >>>>>>> + .highest_bank_bit = 0x3, >>>>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { >>>>>>> + .reg_off = 0x2AC, .bit_off = 0}, >>>>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG1] = { >>>>>>> + .reg_off = 0x2B4, .bit_off = 0}, >>>>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG2] = { >>>>>>> + .reg_off = 0x2BC, .bit_off = 0}, >>>>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG3] = { >>>>>>> + .reg_off = 0x2C4, .bit_off = 0}, >>>>>>> + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { >>>>>>> + .reg_off = 0x2AC, .bit_off = 8}, >>>>>>> + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { >>>>>>> + .reg_off = 0x2B4, .bit_off = 8}, >>>>>>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { >>>>>>> + .reg_off = 0x2BC, .bit_off = 8}, >>>>>>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { >>>>>>> + .reg_off = 0x2C4, .bit_off = 8}, >>>>>>> + }, >>>>>>> +}; >>>>>>> + >>>>>>> static const struct dpu_mdp_cfg sm8250_mdp[] = { >>>>>>> { >>>>>>> .name = "top_0", .id = MDP_TOP, >>>>>>> @@ -861,6 +913,16 @@ static const struct dpu_intf_cfg sc7280_intf[] = { >>>>>>> INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), >>>>>>> }; >>>>>>> +static const struct dpu_intf_cfg sc8180x_intf[] = { >>>>>>> + INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25), >>>>>>> + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27), >>>>>>> + INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 28, 29), >>>>>>> + /* INTF_3 is for MST, wired to INTF_DP 0 and 1, use dummy index until this is supported */ >>>>>>> + INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 999, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 30, 31), >>>>>>> + INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 20, 21), >>>>>>> + INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23), >>>>>> >>>>>> This is a continued discussion from >>>>>> https://patchwork.freedesktop.org/patch/474179/. >>>>>> >>>>>> Shouldnt INTF_5 be marked as INTF_eDP? >>>>>> >>>>> >>>>> Might be, I didn't even know we had an INTF_EDP define... >>>>> >>>>> Is there any reason to distinguish DP and EDP in the DPU? I see sc7280 >>>>> doesn't distinguish the DP and EDP interfaces. >>>>> >>>>> Regards, >>>>> Bjorn >>>>> >>>> >>>> Like I have mentioned in the other patch, I think we have enough confusion >>>> between eDP and DP with the common driver. Since DPU does have separate >>>> interfaces I think we should fix that. >>>> >>>> Regarding sc7280 using INTF_DP, I synced up with Sankeerth. He referred to >>>> your change >>>> https://patchwork.freedesktop.org/patch/457776/?series=92992&rev=5 as it was >>>> posted earlier and ended up using the same INTF_DP macro. So its turning out >>>> to be a cyclical error. >>>> >>> >>> That made me take a second look at the HPG, and sure enough INTF_5 on >>> SC7280 is connected to a eDP/DP Combo PHY. We have the same setup in >>> SC8280XP. >>> >>> In SC8180X, INTF_5 is documented as being connected to a eDP (only) PHY, >>> so perhaps it makes sense to do it there, but for the others its wrong. >>> >> >> Here you are specifying the controller in the catalog. > > No, I'm specifying the type of the INTF. We then use the type of the > intf and the index to match that to a particular DP TX block. > >> So independent of the PHY thats being used, shouldnt this remain >> INTF_eDP? >> > > I don't think it's going to help anyone to say that an interface > connected to a PHY that can be either DP or EDP, should be INTF_EDP. > > People are going to make assumptions in the code such as INTF_EDP does > not have audio and then someone designs a board based on SC7280 with DP > output where they expect audio. Or assumptions about HPD, panel etc... > > I'm not saying that we have all the details figured out on how that's > going to be controlled, but until there's a reason to distinguish > INTF_DP from INTF_EDP I think we should not make one up. And I don't see > that those differences should be hard coded in the DPU driver. > > > If it's confusing to people that DP might be driving an EDP output, then > perhaps we can just name it TMDS again? ;) If you prefer to have TMDS, then like I commented earlier we dont really need this change https://patchwork.freedesktop.org/patch/474271/ :) Whats the benefit of making that change? DRM_ENCODER_TMDS_* can be eDP and DP . Then there is no confusion or guess work in the encoder. DRM_ENCODER_DSI - INTF_DSI DRM_ENCODER_VIRTUAL - INTF_WB DRM_ENCODER_TMDS - INTF_DP OR INTF_eDP ( doesnt matter ) > > Regards, > Bjorn
On 16/02/2022 10:19, Abhinav Kumar wrote: > > > On 2/15/2022 9:14 PM, Bjorn Andersson wrote: >> On Tue 15 Feb 20:38 CST 2022, Abhinav Kumar wrote: >> >>> >>> >>> On 2/15/2022 6:14 PM, Bjorn Andersson wrote: >>>> On Tue 15 Feb 11:42 CST 2022, Abhinav Kumar wrote: >>>> >>>>> >>>>> >>>>> On 2/15/2022 9:28 AM, Bjorn Andersson wrote: >>>>>> On Tue 15 Feb 11:14 CST 2022, Abhinav Kumar wrote: >>>>>> >>>>>>> >>>>>>> >>>>>>> On 2/14/2022 8:33 PM, Bjorn Andersson wrote: >>>>>>>> From: Rob Clark <robdclark@chromium.org> >>>>>>>> >>>>>>>> Add SC8180x to the hardware catalog, for initial support for the >>>>>>>> platform. Due to limitations in the DP driver only one of the >>>>>>>> four DP >>>>>>>> interfaces is left enabled. >>>>>>>> >>>>>>>> The SC8180x platform supports the newly added DPU_INTF_WIDEBUS >>>>>>>> flag and >>>>>>>> the Windows-on-Snapdragon bootloader leaves the widebus bit set, >>>>>>>> so this >>>>>>>> is flagged appropriately to ensure widebus is disabled - for now. >>>>>>>> >>>>>>>> Signed-off-by: Rob Clark <robdclark@chromium.org> >>>>>>>> [bjorn: Reworked intf and irq definitions] >>>>>>>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> >>>>>>>> --- >>>>>>>> >>>>>>>> Changes since v1: >>>>>>>> - Dropped widebus flag >>>>>>>> >>>>>>>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 129 >>>>>>>> ++++++++++++++++++ >>>>>>>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + >>>>>>>> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + >>>>>>>> drivers/gpu/drm/msm/msm_drv.c | 1 + >>>>>>>> 4 files changed, 132 insertions(+) >>>>>>>> >>>>>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>>>>>>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>>>>>>> index aa75991903a6..7ac0fe32df49 100644 >>>>>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>>>>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>>>>>>> @@ -90,6 +90,17 @@ >>>>>>>> BIT(MDP_INTF3_INTR) | \ >>>>>>>> BIT(MDP_INTF4_INTR)) >>>>>>>> +#define IRQ_SC8180X_MASK (BIT(MDP_SSPP_TOP0_INTR) | \ >>>>>>>> + BIT(MDP_SSPP_TOP0_INTR2) | \ >>>>>>>> + BIT(MDP_SSPP_TOP0_HIST_INTR) | \ >>>>>>>> + BIT(MDP_INTF0_INTR) | \ >>>>>>>> + BIT(MDP_INTF1_INTR) | \ >>>>>>>> + BIT(MDP_INTF2_INTR) | \ >>>>>>>> + BIT(MDP_INTF3_INTR) | \ >>>>>>>> + BIT(MDP_INTF4_INTR) | \ >>>>>>>> + BIT(MDP_INTF5_INTR) | \ >>>>>>>> + BIT(MDP_AD4_0_INTR) | \ >>>>>>>> + BIT(MDP_AD4_1_INTR)) >>>>>>>> #define DEFAULT_PIXEL_RAM_SIZE (50 * 1024) >>>>>>>> #define DEFAULT_DPU_LINE_WIDTH 2048 >>>>>>>> @@ -225,6 +236,22 @@ static const struct dpu_caps >>>>>>>> sm8150_dpu_caps = { >>>>>>>> .max_vdeci_exp = MAX_VERT_DECIMATION, >>>>>>>> }; >>>>>>>> +static const struct dpu_caps sc8180x_dpu_caps = { >>>>>>>> + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, >>>>>>>> + .max_mixer_blendstages = 0xb, >>>>>>>> + .qseed_type = DPU_SSPP_SCALER_QSEED3, >>>>>>>> + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */ >>>>>>>> + .ubwc_version = DPU_HW_UBWC_VER_30, >>>>>>>> + .has_src_split = true, >>>>>>>> + .has_dim_layer = true, >>>>>>>> + .has_idle_pc = true, >>>>>>>> + .has_3d_merge = true, >>>>>>>> + .max_linewidth = 4096, >>>>>>>> + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, >>>>>>>> + .max_hdeci_exp = MAX_HORZ_DECIMATION, >>>>>>>> + .max_vdeci_exp = MAX_VERT_DECIMATION, >>>>>>>> +}; >>>>>>>> + >>>>>>>> static const struct dpu_caps sm8250_dpu_caps = { >>>>>>>> .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, >>>>>>>> .max_mixer_blendstages = 0xb, >>>>>>>> @@ -293,6 +320,31 @@ static const struct dpu_mdp_cfg >>>>>>>> sc7180_mdp[] = { >>>>>>>> }, >>>>>>>> }; >>>>>>>> +static const struct dpu_mdp_cfg sc8180x_mdp[] = { >>>>>>>> + { >>>>>>>> + .name = "top_0", .id = MDP_TOP, >>>>>>>> + .base = 0x0, .len = 0x45C, >>>>>>>> + .features = 0, >>>>>>>> + .highest_bank_bit = 0x3, >>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { >>>>>>>> + .reg_off = 0x2AC, .bit_off = 0}, >>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG1] = { >>>>>>>> + .reg_off = 0x2B4, .bit_off = 0}, >>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG2] = { >>>>>>>> + .reg_off = 0x2BC, .bit_off = 0}, >>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG3] = { >>>>>>>> + .reg_off = 0x2C4, .bit_off = 0}, >>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { >>>>>>>> + .reg_off = 0x2AC, .bit_off = 8}, >>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { >>>>>>>> + .reg_off = 0x2B4, .bit_off = 8}, >>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { >>>>>>>> + .reg_off = 0x2BC, .bit_off = 8}, >>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { >>>>>>>> + .reg_off = 0x2C4, .bit_off = 8}, >>>>>>>> + }, >>>>>>>> +}; >>>>>>>> + >>>>>>>> static const struct dpu_mdp_cfg sm8250_mdp[] = { >>>>>>>> { >>>>>>>> .name = "top_0", .id = MDP_TOP, >>>>>>>> @@ -861,6 +913,16 @@ static const struct dpu_intf_cfg >>>>>>>> sc7280_intf[] = { >>>>>>>> INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, >>>>>>>> MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, >>>>>>>> 22, 23), >>>>>>>> }; >>>>>>>> +static const struct dpu_intf_cfg sc8180x_intf[] = { >>>>>>>> + INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, >>>>>>>> MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, >>>>>>>> 24, 25), >>>>>>>> + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, >>>>>>>> INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27), >>>>>>>> + INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, >>>>>>>> INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 28, 29), >>>>>>>> + /* INTF_3 is for MST, wired to INTF_DP 0 and 1, use dummy >>>>>>>> index until this is supported */ >>>>>>>> + INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 999, 24, >>>>>>>> INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 30, 31), >>>>>>>> + INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, >>>>>>>> MSM_DP_CONTROLLER_1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, >>>>>>>> 20, 21), >>>>>>>> + INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, >>>>>>>> MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, >>>>>>>> 22, 23), >>>>>>> >>>>>>> This is a continued discussion from >>>>>>> https://patchwork.freedesktop.org/patch/474179/. >>>>>>> >>>>>>> Shouldnt INTF_5 be marked as INTF_eDP? >>>>>>> >>>>>> >>>>>> Might be, I didn't even know we had an INTF_EDP define... >>>>>> >>>>>> Is there any reason to distinguish DP and EDP in the DPU? I see >>>>>> sc7280 >>>>>> doesn't distinguish the DP and EDP interfaces. >>>>>> >>>>>> Regards, >>>>>> Bjorn >>>>>> >>>>> >>>>> Like I have mentioned in the other patch, I think we have enough >>>>> confusion >>>>> between eDP and DP with the common driver. Since DPU does have >>>>> separate >>>>> interfaces I think we should fix that. >>>>> >>>>> Regarding sc7280 using INTF_DP, I synced up with Sankeerth. He >>>>> referred to >>>>> your change >>>>> https://patchwork.freedesktop.org/patch/457776/?series=92992&rev=5 >>>>> as it was >>>>> posted earlier and ended up using the same INTF_DP macro. So its >>>>> turning out >>>>> to be a cyclical error. >>>>> >>>> >>>> That made me take a second look at the HPG, and sure enough INTF_5 on >>>> SC7280 is connected to a eDP/DP Combo PHY. We have the same setup in >>>> SC8280XP. >>>> >>>> In SC8180X, INTF_5 is documented as being connected to a eDP (only) >>>> PHY, >>>> so perhaps it makes sense to do it there, but for the others its wrong. >>>> >>> >>> Here you are specifying the controller in the catalog. >> >> No, I'm specifying the type of the INTF. We then use the type of the >> intf and the index to match that to a particular DP TX block. >> >>> So independent of the PHY thats being used, shouldnt this remain >>> INTF_eDP? >>> >> >> I don't think it's going to help anyone to say that an interface >> connected to a PHY that can be either DP or EDP, should be INTF_EDP. >> >> People are going to make assumptions in the code such as INTF_EDP does >> not have audio and then someone designs a board based on SC7280 with DP >> output where they expect audio. Or assumptions about HPD, panel etc... Well, eDP links can embed audio streams (like DP links do). >> >> I'm not saying that we have all the details figured out on how that's >> going to be controlled, but until there's a reason to distinguish >> INTF_DP from INTF_EDP I think we should not make one up. And I don't see >> that those differences should be hard coded in the DPU driver. >> >> >> If it's confusing to people that DP might be driving an EDP output, then >> perhaps we can just name it TMDS again? ;) > > If you prefer to have TMDS, then like I commented earlier we dont really > need this change https://patchwork.freedesktop.org/patch/474271/ :) > > Whats the benefit of making that change? DRM_ENCODER_TMDS_* can be eDP > and DP . Then there is no confusion or guess work in the encoder. > > DRM_ENCODER_DSI - INTF_DSI > DRM_ENCODER_VIRTUAL - INTF_WB > DRM_ENCODER_TMDS - INTF_DP OR INTF_eDP ( doesnt matter ) The benefit for me was in the cleaness that we are asking for the INTF_DP with index #3 or INTF_DSI idx 1. The less knowledge he have behind the scenes the better is the code. > >> >> Regards, >> Bjorn
On 16/02/2022 04:34, Abhinav Kumar wrote: > > > On 2/15/2022 4:20 PM, Dmitry Baryshkov wrote: >> On Tue, 15 Feb 2022 at 23:21, Abhinav Kumar >> <quic_abhinavk@quicinc.com> wrote: >>> On 2/15/2022 10:42 AM, Dmitry Baryshkov wrote: >>>> On Tue, 15 Feb 2022 at 20:42, Abhinav Kumar >>>> <quic_abhinavk@quicinc.com> wrote: >>>>> On 2/15/2022 9:28 AM, Bjorn Andersson wrote: >>>>>> On Tue 15 Feb 11:14 CST 2022, Abhinav Kumar wrote: >>>>>> >>>>>>> >>>>>>> >>>>>>> On 2/14/2022 8:33 PM, Bjorn Andersson wrote: >>>>>>>> From: Rob Clark <robdclark@chromium.org> >>>>>>>> >>>>>>>> Add SC8180x to the hardware catalog, for initial support for the >>>>>>>> platform. Due to limitations in the DP driver only one of the >>>>>>>> four DP >>>>>>>> interfaces is left enabled. >>>>>>>> >>>>>>>> The SC8180x platform supports the newly added DPU_INTF_WIDEBUS >>>>>>>> flag and >>>>>>>> the Windows-on-Snapdragon bootloader leaves the widebus bit set, >>>>>>>> so this >>>>>>>> is flagged appropriately to ensure widebus is disabled - for now. >>>>>>>> >>>>>>>> Signed-off-by: Rob Clark <robdclark@chromium.org> >>>>>>>> [bjorn: Reworked intf and irq definitions] >>>>>>>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> >>>>>>>> --- >>>>>>>> >>>>>>>> Changes since v1: >>>>>>>> - Dropped widebus flag >>>>>>>> >>>>>>>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 129 >>>>>>>> ++++++++++++++++++ >>>>>>>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + >>>>>>>> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + >>>>>>>> drivers/gpu/drm/msm/msm_drv.c | 1 + >>>>>>>> 4 files changed, 132 insertions(+) >>>>>>>> >>>>>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>>>>>>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>>>>>>> index aa75991903a6..7ac0fe32df49 100644 >>>>>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>>>>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >>>>>>>> @@ -90,6 +90,17 @@ >>>>>>>> BIT(MDP_INTF3_INTR) | \ >>>>>>>> BIT(MDP_INTF4_INTR)) >>>>>>>> +#define IRQ_SC8180X_MASK (BIT(MDP_SSPP_TOP0_INTR) | \ >>>>>>>> + BIT(MDP_SSPP_TOP0_INTR2) | \ >>>>>>>> + BIT(MDP_SSPP_TOP0_HIST_INTR) | \ >>>>>>>> + BIT(MDP_INTF0_INTR) | \ >>>>>>>> + BIT(MDP_INTF1_INTR) | \ >>>>>>>> + BIT(MDP_INTF2_INTR) | \ >>>>>>>> + BIT(MDP_INTF3_INTR) | \ >>>>>>>> + BIT(MDP_INTF4_INTR) | \ >>>>>>>> + BIT(MDP_INTF5_INTR) | \ >>>>>>>> + BIT(MDP_AD4_0_INTR) | \ >>>>>>>> + BIT(MDP_AD4_1_INTR)) >>>>>>>> #define DEFAULT_PIXEL_RAM_SIZE (50 * 1024) >>>>>>>> #define DEFAULT_DPU_LINE_WIDTH 2048 >>>>>>>> @@ -225,6 +236,22 @@ static const struct dpu_caps >>>>>>>> sm8150_dpu_caps = { >>>>>>>> .max_vdeci_exp = MAX_VERT_DECIMATION, >>>>>>>> }; >>>>>>>> +static const struct dpu_caps sc8180x_dpu_caps = { >>>>>>>> + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, >>>>>>>> + .max_mixer_blendstages = 0xb, >>>>>>>> + .qseed_type = DPU_SSPP_SCALER_QSEED3, >>>>>>>> + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */ >>>>>>>> + .ubwc_version = DPU_HW_UBWC_VER_30, >>>>>>>> + .has_src_split = true, >>>>>>>> + .has_dim_layer = true, >>>>>>>> + .has_idle_pc = true, >>>>>>>> + .has_3d_merge = true, >>>>>>>> + .max_linewidth = 4096, >>>>>>>> + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, >>>>>>>> + .max_hdeci_exp = MAX_HORZ_DECIMATION, >>>>>>>> + .max_vdeci_exp = MAX_VERT_DECIMATION, >>>>>>>> +}; >>>>>>>> + >>>>>>>> static const struct dpu_caps sm8250_dpu_caps = { >>>>>>>> .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, >>>>>>>> .max_mixer_blendstages = 0xb, >>>>>>>> @@ -293,6 +320,31 @@ static const struct dpu_mdp_cfg >>>>>>>> sc7180_mdp[] = { >>>>>>>> }, >>>>>>>> }; >>>>>>>> +static const struct dpu_mdp_cfg sc8180x_mdp[] = { >>>>>>>> + { >>>>>>>> + .name = "top_0", .id = MDP_TOP, >>>>>>>> + .base = 0x0, .len = 0x45C, >>>>>>>> + .features = 0, >>>>>>>> + .highest_bank_bit = 0x3, >>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { >>>>>>>> + .reg_off = 0x2AC, .bit_off = 0}, >>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG1] = { >>>>>>>> + .reg_off = 0x2B4, .bit_off = 0}, >>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG2] = { >>>>>>>> + .reg_off = 0x2BC, .bit_off = 0}, >>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG3] = { >>>>>>>> + .reg_off = 0x2C4, .bit_off = 0}, >>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { >>>>>>>> + .reg_off = 0x2AC, .bit_off = 8}, >>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { >>>>>>>> + .reg_off = 0x2B4, .bit_off = 8}, >>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { >>>>>>>> + .reg_off = 0x2BC, .bit_off = 8}, >>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { >>>>>>>> + .reg_off = 0x2C4, .bit_off = 8}, >>>>>>>> + }, >>>>>>>> +}; >>>>>>>> + >>>>>>>> static const struct dpu_mdp_cfg sm8250_mdp[] = { >>>>>>>> { >>>>>>>> .name = "top_0", .id = MDP_TOP, >>>>>>>> @@ -861,6 +913,16 @@ static const struct dpu_intf_cfg >>>>>>>> sc7280_intf[] = { >>>>>>>> INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, >>>>>>>> MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, >>>>>>>> 22, 23), >>>>>>>> }; >>>>>>>> +static const struct dpu_intf_cfg sc8180x_intf[] = { >>>>>>>> + INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, >>>>>>>> MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, >>>>>>>> 24, 25), >>>>>>>> + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, >>>>>>>> INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27), >>>>>>>> + INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, >>>>>>>> INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 28, 29), >>>>>>>> + /* INTF_3 is for MST, wired to INTF_DP 0 and 1, use dummy >>>>>>>> index until this is supported */ >>>>>>>> + INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 999, 24, >>>>>>>> INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 30, 31), >>>>>>>> + INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, >>>>>>>> MSM_DP_CONTROLLER_1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, >>>>>>>> 20, 21), >>>>>>>> + INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, >>>>>>>> MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, >>>>>>>> 22, 23), >>>>>>> >>>>>>> This is a continued discussion from >>>>>>> https://patchwork.freedesktop.org/patch/474179/. >>>>>>> >>>>>>> Shouldnt INTF_5 be marked as INTF_eDP? >>>>>>> >>>>>> >>>>>> Might be, I didn't even know we had an INTF_EDP define... >>>>>> >>>>>> Is there any reason to distinguish DP and EDP in the DPU? I see >>>>>> sc7280 >>>>>> doesn't distinguish the DP and EDP interfaces. >>>>>> >>>>>> Regards, >>>>>> Bjorn >>>>>> >>>>> >>>>> Like I have mentioned in the other patch, I think we have enough >>>>> confusion between eDP and DP with the common driver. Since DPU does >>>>> have >>>>> separate interfaces I think we should fix that. >>>>> >>>>> Regarding sc7280 using INTF_DP, I synced up with Sankeerth. He >>>>> referred >>>>> to your change >>>>> https://patchwork.freedesktop.org/patch/457776/?series=92992&rev=5 >>>>> as it >>>>> was posted earlier and ended up using the same INTF_DP macro. So its >>>>> turning out to be a cyclical error. >>>>> >>>>> I think we should fix both. >>>> >>>> So, what is the value for DPU to distinguish between eDP and DP >>>> interfaces? >>>> Would we get anything except the (intf_type == INTF_EDP || intf_type >>>> == INTF_DP) instead of (intf_type == INTF_DP) in all the cases where >>>> the type is checked? >>> >>> There are only two places currently where I am seeing this OR condition >>> between INTF_DP and INTF_eDP. I do not have an example to give you today >>> of where we would need to distinguish eDP and DP but I cannot guarantee >>> we will not have such a case. >>> >>>> (thus leading us to cases when someone would forget to add INTF_EDP >>>> next to INTF_DP) >>>> >>>> Also, if we are switching from INTF_DP to INTF_EDP, should we stop >>>> using end-to-end numbering (like MSM_DP_CONTROLLER_2 for INTF_5) and >>>> add a separate numbering scheme for INTF_EDP? >>>> >>> We should change the controller ID to match what it actually is. >>> >>> Now that you pointed this out, this looks even more confusing to me to >>> say that MSM_DP_CONTROLLER_2 is actually a EDP controller because >>> fundamentally and even hardware block wise they are different. >> >> So, do we split msm_priv->dp too? It's indexed using >> MSM_DP_CONTROLLER_n entries. >> Do we want to teach drm/msm/dp code that there are priv->dp[] and >> priv->edp arrays? > > ok so now priv->dp and priv->edp arrays are also in the picture here :) > > Actually all these questions should have probably come when we were > figuring out how best to re-use eDP and DP driver. > > Either way atleast, its good we are documenting all these questions on > this thread so that anyone can refer this to know what all was missed > out :) > > priv->dp is of type msm_dp. When re-using DP driver for eDP and since > struct msm_dp is the shared struct between dpu and the msm/dp, I get > your point of re-using MSM_DP_CONTROLLER_* as thats being use to index. > > So MSM_DP_CONTROLLER_* is more of an index into the DP driver and not > really a hardware indexing scheme. > > If we split into two arrays, we need more changes to dpu_encoder too. > > Too instrusive a change at this point, even though probably correct. > > But are you seeing more changes required even if we just change INTF_DP > to INTF_eDP for the eDP entries? What are the challenges there? > >> >>> Why do we want to keep building something on top of this confusing >>> terminology knowing that it can be corrected when its fairly in the >>> development stage rather than realizing later it will break. >>> >>> We have only been discussing that eDP and DP are treated equally in the >>> DPU code and hence why do we need to distinguish. >>> >>> As per current code yes, but I cannot and probably noone else can >>> guarantee that in future there can be cases were we want to distinguish >>> the two for something. >> >> Me too. For now I see INTF_DP as a useful abstraction for 'the >> interface that's handled by drm/msm/dp and shares common timing >> requirements'. > > struct msm_dp is the useful abstraction already for drm/msm/dp. > Not INTF_DP. > >> >> At this moment I estimate that splitting it properly into INTF_DP and >> INTF_EDP can bring more troubles than possible future cases. > > Can you please elaborate why changing INTF_DP to INTF_eDP is more > trouble if we leave the MSM_DP_CONTROLLER_* intact? > >> If at some point we were to distinguish DP and eDP usecases of >> INTF_DP, I would suggest adding is_embedded property rather than >> splitting away INTF_EDP. >> > > Can you please elaborate on this is_embedded idea? If we need to distinguish DP and eDP behind the INTF_DP we can explicitly ask msm_dp_is_embedded_dp(). > >> It's good to think about future cases and expansions. >> But it's too easy to create a monstruosos constructs supporting all >> possible features that no one can understand, grok and maintain. >> Been there, created several of them, refactored others. >> >> Let me throw in yet-another-possible-if: if at some point the hardware >> supported iDP using the same DP block, would you split INTF_iDP? > >>> Thats the overally consensus within our team. >>> >>> So if this going to work smoothly by just fixing two entries in the hw >>> catalog I would rather do that now rather than realizing this down the >>> line again just to save usage of one more enum. >>> >>>> With all that in mind I'd suggest to: >>>> - use INTF_DP for both DP and new eDP interfaces >>>> - remove INTF_EDP usage from the dpu1 driver >>>> - add a note that INTF_EDP corresponds to older eDP blocks (found on >>>> 8x74/8x84)
On 16/02/2022 05:16, Abhinav Kumar wrote: > > > On 2/15/2022 6:03 PM, Bjorn Andersson wrote: >> On Tue 15 Feb 19:34 CST 2022, Abhinav Kumar wrote: >> >>> >>> >>> On 2/15/2022 4:20 PM, Dmitry Baryshkov wrote: >>>> On Tue, 15 Feb 2022 at 23:21, Abhinav Kumar >>>> <quic_abhinavk@quicinc.com> wrote: >>>>> On 2/15/2022 10:42 AM, Dmitry Baryshkov wrote: >>>>>> On Tue, 15 Feb 2022 at 20:42, Abhinav Kumar >>>>>> <quic_abhinavk@quicinc.com> wrote: >>>>>>> On 2/15/2022 9:28 AM, Bjorn Andersson wrote: >>>>>>>> On Tue 15 Feb 11:14 CST 2022, Abhinav Kumar wrote: >>>>>>>>> On 2/14/2022 8:33 PM, Bjorn Andersson wrote: >>>>>>>>>> From: Rob Clark <robdclark@chromium.org> >> [..] >>>>>> (thus leading us to cases when someone would forget to add INTF_EDP >>>>>> next to INTF_DP) >>>>>> >>>>>> Also, if we are switching from INTF_DP to INTF_EDP, should we stop >>>>>> using end-to-end numbering (like MSM_DP_CONTROLLER_2 for INTF_5) and >>>>>> add a separate numbering scheme for INTF_EDP? >>>>>> >>>>> We should change the controller ID to match what it actually is. >>>>> >>>>> Now that you pointed this out, this looks even more confusing to me to >>>>> say that MSM_DP_CONTROLLER_2 is actually a EDP controller because >>>>> fundamentally and even hardware block wise they are different. >>>> >>>> So, do we split msm_priv->dp too? It's indexed using >>>> MSM_DP_CONTROLLER_n entries. >>>> Do we want to teach drm/msm/dp code that there are priv->dp[] and >>>> priv->edp arrays? >>> >>> ok so now priv->dp and priv->edp arrays are also in the picture here :) >>> >>> Actually all these questions should have probably come when we were >>> figuring >>> out how best to re-use eDP and DP driver. Well, these questions were evaluated. And this resulted in our suggestion to reuse DP driver, INTF_DP type and priv->dp array. >>> >>> Either way atleast, its good we are documenting all these questions >>> on this >>> thread so that anyone can refer this to know what all was missed out :) >>> >>> priv->dp is of type msm_dp. When re-using DP driver for eDP and since >>> struct msm_dp is the shared struct between dpu and the msm/dp, I get >>> your >>> point of re-using MSM_DP_CONTROLLER_* as thats being use to index. >>> >>> So MSM_DP_CONTROLLER_* is more of an index into the DP driver and not >>> really >>> a hardware indexing scheme. >>> >>> If we split into two arrays, we need more changes to dpu_encoder too. >>> >>> Too instrusive a change at this point, even though probably correct. >>> >> >> I'm sorry, but performing such a split would create a whole bunch of >> duplication and I don't see the reasons yet. Can you please give me an >> example of when the DPU _code_ would benefit from being specifically >> written for EDP vs DP? >> >> Things where it doesn't make sense to enable certain features in >> runtime - but really have different implementation for the two interface >> types. >> > > Like I have mentioned in my previous comment, this would be a big change > and I am also not in favor of this big change. I'm also not in favour of splitting priv->dp into ->dp and ->edp. One of the reasons, pointed out by Bjorn, is that some of interfaces can be used for both DP and eDP. Adding them to either of arrays would create confusion. Second reason being that introducing the split would bring in extra code for no additional benefits. From the DPU point of view both DP and eDP interfaces look the same. >>> But are you seeing more changes required even if we just change >>> INTF_DP to >>> INTF_eDP for the eDP entries? What are the challenges there? >>> >> >> What are the benefits? > > In terms of current code, again like I said before in my previous > comments several times I do not have an example. > > I was keeping the separation in case in future for some features we do > need to differentiate eDP and DP. And we also might need to separte eDP-behind msm/dp and old-8x74-eDP. It the same "possible" future that we might face. > > Somehow I also feel this change and below are interlinked that way. > > https://patchwork.freedesktop.org/patch/473871/ > > The only reason we need this change is because both eDP and DP use > DRM_MODE_ENCODER_TMDS and specifying the intf_type directly will clear > the confusion because DRM_MODE_ENCODER_DSI means DSI and > DRM_MODE_ENCODER_VIRTUAL means Writeback but DRM_MODE_ENCODER_TMDS can > mean DP OR eDP interface. > > The ambiguity was always for eDP and DP. > > That led to the discussion about the INTF_* we are specifying in the > dpu_hw_catalog only to find the discrepancy. > > So now by clearing that ambiguity that change makes sense. That > discussion trickled into this one. I did some research for the INTF_*. As you probably remember (I didn't) on mdp4 and mdp5 chipsets we program the DISP_INTF_SEL registers, telling the hardware which hardware is to be driven by each of INTFs. The freely available 410E HRD demands that this register is written. At some point this became unnecessary, but the DPU driver kept INTF_* intact. Including INTF_EDP, INTF_LCDC, INTF_HDMI, etc. However from my understanding INTF_EDP would correspond to older eDP interfaces, not to eDP panels being connected by the contemporary DP/eDP ports. Oh, and last but not least, I'd suggest to follow downstream, which uses "dp" to name all of DP/EDP ports. See https://github.com/TheXPerienceProject/android_kernel_xiaomi_courbet/blob/xpe-16.0/arch/arm64/boot/dts/qcom/sdmshrike-sde.dtsi#L89 So, to summarize my proposal: - Keep INTF_EDP reserved for 8x74/8x84 - Use INTF_DP for all contemporary DP and eDP ports - Documet this in dpu_hw_mdss.h - Remove INTF_EDP usage in dpu1 driver.
On Thu 17 Feb 19:10 CST 2022, Dmitry Baryshkov wrote: > On 16/02/2022 05:16, Abhinav Kumar wrote: > > > > > > On 2/15/2022 6:03 PM, Bjorn Andersson wrote: > > > On Tue 15 Feb 19:34 CST 2022, Abhinav Kumar wrote: > > > > > > > > > > > > > > > On 2/15/2022 4:20 PM, Dmitry Baryshkov wrote: > > > > > On Tue, 15 Feb 2022 at 23:21, Abhinav Kumar > > > > > <quic_abhinavk@quicinc.com> wrote: > > > > > > On 2/15/2022 10:42 AM, Dmitry Baryshkov wrote: > > > > > > > On Tue, 15 Feb 2022 at 20:42, Abhinav Kumar > > > > > > > <quic_abhinavk@quicinc.com> wrote: > > > > > > > > On 2/15/2022 9:28 AM, Bjorn Andersson wrote: > > > > > > > > > On Tue 15 Feb 11:14 CST 2022, Abhinav Kumar wrote: > > > > > > > > > > On 2/14/2022 8:33 PM, Bjorn Andersson wrote: > > > > > > > > > > > From: Rob Clark <robdclark@chromium.org> > > > [..] > > > > > > > (thus leading us to cases when someone would forget to add INTF_EDP > > > > > > > next to INTF_DP) > > > > > > > > > > > > > > Also, if we are switching from INTF_DP to INTF_EDP, should we stop > > > > > > > using end-to-end numbering (like MSM_DP_CONTROLLER_2 for INTF_5) and > > > > > > > add a separate numbering scheme for INTF_EDP? > > > > > > > > > > > > > We should change the controller ID to match what it actually is. > > > > > > > > > > > > Now that you pointed this out, this looks even more confusing to me to > > > > > > say that MSM_DP_CONTROLLER_2 is actually a EDP controller because > > > > > > fundamentally and even hardware block wise they are different. > > > > > > > > > > So, do we split msm_priv->dp too? It's indexed using > > > > > MSM_DP_CONTROLLER_n entries. > > > > > Do we want to teach drm/msm/dp code that there are priv->dp[] and > > > > > priv->edp arrays? > > > > > > > > ok so now priv->dp and priv->edp arrays are also in the picture here :) > > > > > > > > Actually all these questions should have probably come when we > > > > were figuring > > > > out how best to re-use eDP and DP driver. > > Well, these questions were evaluated. And this resulted in our suggestion to > reuse DP driver, INTF_DP type and priv->dp array. > > > > > > > > > Either way atleast, its good we are documenting all these > > > > questions on this > > > > thread so that anyone can refer this to know what all was missed out :) > > > > > > > > priv->dp is of type msm_dp. When re-using DP driver for eDP and since > > > > struct msm_dp is the shared struct between dpu and the msm/dp, I > > > > get your > > > > point of re-using MSM_DP_CONTROLLER_* as thats being use to index. > > > > > > > > So MSM_DP_CONTROLLER_* is more of an index into the DP driver > > > > and not really > > > > a hardware indexing scheme. > > > > > > > > If we split into two arrays, we need more changes to dpu_encoder too. > > > > > > > > Too instrusive a change at this point, even though probably correct. > > > > > > > > > > I'm sorry, but performing such a split would create a whole bunch of > > > duplication and I don't see the reasons yet. Can you please give me an > > > example of when the DPU _code_ would benefit from being specifically > > > written for EDP vs DP? > > > > > > Things where it doesn't make sense to enable certain features in > > > runtime - but really have different implementation for the two interface > > > types. > > > > > > > Like I have mentioned in my previous comment, this would be a big change > > and I am also not in favor of this big change. > I'm also not in favour of splitting priv->dp into ->dp and ->edp. > > One of the reasons, pointed out by Bjorn, is that some of interfaces can be > used for both DP and eDP. Adding them to either of arrays would create > confusion. > > Second reason being that introducing the split would bring in extra code for > no additional benefits. From the DPU point of view both DP and eDP > interfaces look the same. > > > > > But are you seeing more changes required even if we just change > > > > INTF_DP to > > > > INTF_eDP for the eDP entries? What are the challenges there? > > > > > > > > > > What are the benefits? > > > > In terms of current code, again like I said before in my previous > > comments several times I do not have an example. > > > > I was keeping the separation in case in future for some features we do > > need to differentiate eDP and DP. > > And we also might need to separte eDP-behind msm/dp and old-8x74-eDP. > It the same "possible" future that we might face. > > > > > Somehow I also feel this change and below are interlinked that way. > > > > https://patchwork.freedesktop.org/patch/473871/ > > > > The only reason we need this change is because both eDP and DP use > > DRM_MODE_ENCODER_TMDS and specifying the intf_type directly will clear > > the confusion because DRM_MODE_ENCODER_DSI means DSI and > > DRM_MODE_ENCODER_VIRTUAL means Writeback but DRM_MODE_ENCODER_TMDS can > > mean DP OR eDP interface. > > > > The ambiguity was always for eDP and DP. > > > > That led to the discussion about the INTF_* we are specifying in the > > dpu_hw_catalog only to find the discrepancy. > > > > So now by clearing that ambiguity that change makes sense. That > > discussion trickled into this one. > > I did some research for the INTF_*. As you probably remember (I didn't) on > mdp4 and mdp5 chipsets we program the DISP_INTF_SEL registers, telling the > hardware which hardware is to be driven by each of INTFs. > The freely available 410E HRD demands that this register is written. > > At some point this became unnecessary, but the DPU driver kept INTF_* > intact. Including INTF_EDP, INTF_LCDC, INTF_HDMI, etc. However from my > understanding INTF_EDP would correspond to older eDP interfaces, not to eDP > panels being connected by the contemporary DP/eDP ports. > > Oh, and last but not least, I'd suggest to follow downstream, which uses > "dp" to name all of DP/EDP ports. See https://github.com/TheXPerienceProject/android_kernel_xiaomi_courbet/blob/xpe-16.0/arch/arm64/boot/dts/qcom/sdmshrike-sde.dtsi#L89 > > So, to summarize my proposal: > - Keep INTF_EDP reserved for 8x74/8x84 > - Use INTF_DP for all contemporary DP and eDP ports > - Documet this in dpu_hw_mdss.h > - Remove INTF_EDP usage in dpu1 driver. > I'm in favour of this. Regards, Bjorn
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c index aa75991903a6..7ac0fe32df49 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c @@ -90,6 +90,17 @@ BIT(MDP_INTF3_INTR) | \ BIT(MDP_INTF4_INTR)) +#define IRQ_SC8180X_MASK (BIT(MDP_SSPP_TOP0_INTR) | \ + BIT(MDP_SSPP_TOP0_INTR2) | \ + BIT(MDP_SSPP_TOP0_HIST_INTR) | \ + BIT(MDP_INTF0_INTR) | \ + BIT(MDP_INTF1_INTR) | \ + BIT(MDP_INTF2_INTR) | \ + BIT(MDP_INTF3_INTR) | \ + BIT(MDP_INTF4_INTR) | \ + BIT(MDP_INTF5_INTR) | \ + BIT(MDP_AD4_0_INTR) | \ + BIT(MDP_AD4_1_INTR)) #define DEFAULT_PIXEL_RAM_SIZE (50 * 1024) #define DEFAULT_DPU_LINE_WIDTH 2048 @@ -225,6 +236,22 @@ static const struct dpu_caps sm8150_dpu_caps = { .max_vdeci_exp = MAX_VERT_DECIMATION, }; +static const struct dpu_caps sc8180x_dpu_caps = { + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, + .max_mixer_blendstages = 0xb, + .qseed_type = DPU_SSPP_SCALER_QSEED3, + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */ + .ubwc_version = DPU_HW_UBWC_VER_30, + .has_src_split = true, + .has_dim_layer = true, + .has_idle_pc = true, + .has_3d_merge = true, + .max_linewidth = 4096, + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, + .max_hdeci_exp = MAX_HORZ_DECIMATION, + .max_vdeci_exp = MAX_VERT_DECIMATION, +}; + static const struct dpu_caps sm8250_dpu_caps = { .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, .max_mixer_blendstages = 0xb, @@ -293,6 +320,31 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = { }, }; +static const struct dpu_mdp_cfg sc8180x_mdp[] = { + { + .name = "top_0", .id = MDP_TOP, + .base = 0x0, .len = 0x45C, + .features = 0, + .highest_bank_bit = 0x3, + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { + .reg_off = 0x2AC, .bit_off = 0}, + .clk_ctrls[DPU_CLK_CTRL_VIG1] = { + .reg_off = 0x2B4, .bit_off = 0}, + .clk_ctrls[DPU_CLK_CTRL_VIG2] = { + .reg_off = 0x2BC, .bit_off = 0}, + .clk_ctrls[DPU_CLK_CTRL_VIG3] = { + .reg_off = 0x2C4, .bit_off = 0}, + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { + .reg_off = 0x2AC, .bit_off = 8}, + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { + .reg_off = 0x2B4, .bit_off = 8}, + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { + .reg_off = 0x2BC, .bit_off = 8}, + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { + .reg_off = 0x2C4, .bit_off = 8}, + }, +}; + static const struct dpu_mdp_cfg sm8250_mdp[] = { { .name = "top_0", .id = MDP_TOP, @@ -861,6 +913,16 @@ static const struct dpu_intf_cfg sc7280_intf[] = { INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), }; +static const struct dpu_intf_cfg sc8180x_intf[] = { + INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25), + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27), + INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 28, 29), + /* INTF_3 is for MST, wired to INTF_DP 0 and 1, use dummy index until this is supported */ + INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 999, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 30, 31), + INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 20, 21), + INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23), +}; + /************************************************************* * VBIF sub blocks config *************************************************************/ @@ -931,6 +993,10 @@ static const struct dpu_qos_lut_entry sm8150_qos_linear[] = { {.fl = 0, .lut = 0x0011222222223357 }, }; +static const struct dpu_qos_lut_entry sc8180x_qos_linear[] = { + {.fl = 4, .lut = 0x0000000000000357 }, +}; + static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = { {.fl = 10, .lut = 0x344556677}, {.fl = 11, .lut = 0x3344556677}, @@ -944,6 +1010,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_macrotile[] = { {.fl = 0, .lut = 0x0011223344556677}, }; +static const struct dpu_qos_lut_entry sc8180x_qos_macrotile[] = { + {.fl = 10, .lut = 0x0000000344556677}, +}; + static const struct dpu_qos_lut_entry sdm845_qos_nrt[] = { {.fl = 0, .lut = 0x0}, }; @@ -1045,6 +1115,33 @@ static const struct dpu_perf_cfg sm8150_perf_data = { .bw_inefficiency_factor = 120, }; +static const struct dpu_perf_cfg sc8180x_perf_data = { + .max_bw_low = 9600000, + .max_bw_high = 9600000, + .min_core_ib = 2400000, + .min_llcc_ib = 800000, + .min_dram_ib = 800000, + .danger_lut_tbl = {0xf, 0xffff, 0x0, 0x0}, + .qos_lut_tbl = { + {.nentry = ARRAY_SIZE(sc8180x_qos_linear), + .entries = sc8180x_qos_linear + }, + {.nentry = ARRAY_SIZE(sc8180x_qos_macrotile), + .entries = sc8180x_qos_macrotile + }, + {.nentry = ARRAY_SIZE(sc7180_qos_nrt), + .entries = sc7180_qos_nrt + }, + /* TODO: macrotile-qseed is different from macrotile */ + }, + .cdp_cfg = { + {.rd_enable = 1, .wr_enable = 1}, + {.rd_enable = 1, .wr_enable = 0} + }, + .clk_inefficiency_factor = 105, + .bw_inefficiency_factor = 120, +}; + static const struct dpu_perf_cfg sm8250_perf_data = { .max_bw_low = 13700000, .max_bw_high = 16600000, @@ -1199,6 +1296,37 @@ static void sm8150_cfg_init(struct dpu_mdss_cfg *dpu_cfg) }; } +/* + * sc8180x_cfg_init(): populate sc8180 dpu sub-blocks reg offsets + * and instance counts. + */ +static void sc8180x_cfg_init(struct dpu_mdss_cfg *dpu_cfg) +{ + *dpu_cfg = (struct dpu_mdss_cfg){ + .caps = &sc8180x_dpu_caps, + .mdp_count = ARRAY_SIZE(sc8180x_mdp), + .mdp = sc8180x_mdp, + .ctl_count = ARRAY_SIZE(sm8150_ctl), + .ctl = sm8150_ctl, + .sspp_count = ARRAY_SIZE(sdm845_sspp), + .sspp = sdm845_sspp, + .mixer_count = ARRAY_SIZE(sm8150_lm), + .mixer = sm8150_lm, + .pingpong_count = ARRAY_SIZE(sm8150_pp), + .pingpong = sm8150_pp, + .merge_3d_count = ARRAY_SIZE(sm8150_merge_3d), + .merge_3d = sm8150_merge_3d, + .intf_count = ARRAY_SIZE(sc8180x_intf), + .intf = sc8180x_intf, + .vbif_count = ARRAY_SIZE(sdm845_vbif), + .vbif = sdm845_vbif, + .reg_dma_count = 1, + .dma_cfg = sm8150_regdma, + .perf = sc8180x_perf_data, + .mdss_irqs = IRQ_SC8180X_MASK, + }; +} + /* * sm8250_cfg_init(): populate sm8250 dpu sub-blocks reg offsets * and instance counts. @@ -1260,6 +1388,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = { { .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init}, { .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init}, { .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init}, + { .hw_rev = DPU_HW_VER_510, .cfg_init = sc8180x_cfg_init}, { .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init}, { .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init}, { .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init}, diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h index 31af04afda7d..9572d29ff2ff 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h @@ -39,6 +39,7 @@ #define DPU_HW_VER_410 DPU_HW_VER(4, 1, 0) /* sdm670 v1.0 */ #define DPU_HW_VER_500 DPU_HW_VER(5, 0, 0) /* sm8150 v1.0 */ #define DPU_HW_VER_501 DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */ +#define DPU_HW_VER_510 DPU_HW_VER(5, 1, 1) /* sc8180 */ #define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */ #define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */ #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */ diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index 47fe11a84a77..cedc631f8498 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -1351,6 +1351,7 @@ const struct of_device_id dpu_dt_match[] = { { .compatible = "qcom,sdm845-dpu", }, { .compatible = "qcom,sc7180-dpu", }, { .compatible = "qcom,sc7280-dpu", }, + { .compatible = "qcom,sc8180x-dpu", }, { .compatible = "qcom,sm8150-dpu", }, { .compatible = "qcom,sm8250-dpu", }, {} diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index 555666e3f960..0f441d358b60 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -1438,6 +1438,7 @@ static const struct of_device_id dt_match[] = { { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU }, { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU }, { .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU }, + { .compatible = "qcom,sc8180x-mdss", .data = (void *)KMS_DPU }, { .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU }, { .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU }, {}