@@ -70,68 +70,6 @@
#include "dce/dce_aux.h"
#include "dce/dce_i2c.h"
-const struct _vcs_dpi_ip_params_st dcn1_0_ip = {
- .rob_buffer_size_kbytes = 64,
- .det_buffer_size_kbytes = 164,
- .dpte_buffer_size_in_pte_reqs_luma = 42,
- .dpp_output_buffer_pixels = 2560,
- .opp_output_buffer_lines = 1,
- .pixel_chunk_size_kbytes = 8,
- .pte_enable = 1,
- .pte_chunk_size_kbytes = 2,
- .meta_chunk_size_kbytes = 2,
- .writeback_chunk_size_kbytes = 2,
- .line_buffer_size_bits = 589824,
- .max_line_buffer_lines = 12,
- .IsLineBufferBppFixed = 0,
- .LineBufferFixedBpp = -1,
- .writeback_luma_buffer_size_kbytes = 12,
- .writeback_chroma_buffer_size_kbytes = 8,
- .max_num_dpp = 4,
- .max_num_wb = 2,
- .max_dchub_pscl_bw_pix_per_clk = 4,
- .max_pscl_lb_bw_pix_per_clk = 2,
- .max_lb_vscl_bw_pix_per_clk = 4,
- .max_vscl_hscl_bw_pix_per_clk = 4,
- .max_hscl_ratio = 4,
- .max_vscl_ratio = 4,
- .hscl_mults = 4,
- .vscl_mults = 4,
- .max_hscl_taps = 8,
- .max_vscl_taps = 8,
- .dispclk_ramp_margin_percent = 1,
- .underscan_factor = 1.10,
- .min_vblank_lines = 14,
- .dppclk_delay_subtotal = 90,
- .dispclk_delay_subtotal = 42,
- .dcfclk_cstate_latency = 10,
- .max_inter_dcn_tile_repeaters = 8,
- .can_vstartup_lines_exceed_vsync_plus_back_porch_lines_minus_one = 0,
- .bug_forcing_LC_req_same_size_fixed = 0,
-};
-
-const struct _vcs_dpi_soc_bounding_box_st dcn1_0_soc = {
- .sr_exit_time_us = 9.0,
- .sr_enter_plus_exit_time_us = 11.0,
- .urgent_latency_us = 4.0,
- .writeback_latency_us = 12.0,
- .ideal_dram_bw_after_urgent_percent = 80.0,
- .max_request_size_bytes = 256,
- .downspread_percent = 0.5,
- .dram_page_open_time_ns = 50.0,
- .dram_rw_turnaround_time_ns = 17.5,
- .dram_return_buffer_per_channel_bytes = 8192,
- .round_trip_ping_latency_dcfclk_cycles = 128,
- .urgent_out_of_order_return_per_channel_bytes = 256,
- .channel_interleave_bytes = 256,
- .num_banks = 8,
- .num_chans = 2,
- .vmm_page_size_bytes = 4096,
- .dram_clock_change_latency_us = 17.0,
- .writeback_dram_clock_change_latency_us = 23.0,
- .return_bus_width_bytes = 64,
-};
-
#ifndef mmDP0_DP_DPHY_INTERNAL_CTRL
#define mmDP0_DP_DPHY_INTERNAL_CTRL 0x210f
#define mmDP0_DP_DPHY_INTERNAL_CTRL_BASE_IDX 2
@@ -27,6 +27,7 @@
#define __DC_RESOURCE_DCN10_H__
#include "core_types.h"
+#include "dml/dcn10/dcn10_fpu.h"
#define TO_DCN10_RES_POOL(pool)\
container_of(pool, struct dcn10_resource_pool, base)
@@ -35,6 +36,9 @@ struct dc;
struct resource_pool;
struct _vcs_dpi_display_pipe_params_st;
+extern struct _vcs_dpi_ip_params_st dcn1_0_ip;
+extern struct _vcs_dpi_soc_bounding_box_st dcn1_0_soc;
+
struct dcn10_resource_pool {
struct resource_pool base;
};
@@ -58,6 +58,7 @@ CFLAGS_$(AMDDALPATH)/dc/dml/display_mode_lib.o := $(dml_ccflags)
ifdef CONFIG_DRM_AMD_DC_DCN
CFLAGS_$(AMDDALPATH)/dc/dml/display_mode_vba.o := $(dml_ccflags)
+CFLAGS_$(AMDDALPATH)/dc/dml/dcn10/dcn10_fpu.o := $(dml_ccflags)
CFLAGS_$(AMDDALPATH)/dc/dml/dcn20/dcn20_fpu.o := $(dml_ccflags)
CFLAGS_$(AMDDALPATH)/dc/dml/dcn20/display_mode_vba_20.o := $(dml_ccflags)
CFLAGS_$(AMDDALPATH)/dc/dml/dcn20/display_mode_vba_20.o := $(dml_ccflags)
@@ -105,6 +106,7 @@ DML = calcs/dce_calcs.o calcs/custom_float.o calcs/bw_fixed.o
ifdef CONFIG_DRM_AMD_DC_DCN
DML += display_mode_lib.o display_rq_dlg_helpers.o dml1_display_rq_dlg_calc.o
+DML += dcn10/dcn10_fpu.o
DML += dcn20/dcn20_fpu.o
DML += display_mode_vba.o dcn20/display_rq_dlg_calc_20.o dcn20/display_mode_vba_20.o
DML += dcn20/display_rq_dlg_calc_20v2.o dcn20/display_mode_vba_20v2.o
new file mode 100644
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright 2021 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#include "dcn10/dcn10_resource.h"
+
+#include "dcn10_fpu.h"
+
+/**
+ * DOC: DCN10 FPU manipulation Overview
+ *
+ * The DCN architecture relies on FPU operations, which require special
+ * compilation flags and the use of kernel_fpu_begin/end functions; ideally, we
+ * want to avoid spreading FPU access across multiple files. With this idea in
+ * mind, this file aims to centralize DCN10 functions that require FPU access
+ * in a single place. Code in this file follows the following code pattern:
+ *
+ * 1. Functions that use FPU operations should be isolated in static functions.
+ * 2. The FPU functions should have the noinline attribute to ensure anything
+ * that deals with FP register is contained within this call.
+ * 3. All function that needs to be accessed outside this file requires a
+ * public interface that not uses any FPU reference.
+ * 4. Developers **must not** use DC_FP_START/END in this file, but they need
+ * to ensure that the caller invokes it before access any function available
+ * in this file. For this reason, public functions in this file must invoke
+ * dc_assert_fp_enabled();
+ *
+ * Let's expand a little bit more the idea in the code pattern. To fully
+ * isolate FPU operations in a single place, we must avoid situations where
+ * compilers spill FP values to registers due to FP enable in a specific C
+ * file. Note that even if we isolate all FPU functions in a single file and
+ * call its interface from other files, the compiler might enable the use of
+ * FPU before we call DC_FP_START. Nevertheless, it is the programmer's
+ * responsibility to invoke DC_FP_START/END in the correct place. To highlight
+ * situations where developers forgot to use the FP protection before calling
+ * the DC FPU interface functions, we introduce a helper that checks if the
+ * function is invoked under FP protection. If not, it will trigger a kernel
+ * warning.
+ */
+
+struct _vcs_dpi_ip_params_st dcn1_0_ip = {
+ .rob_buffer_size_kbytes = 64,
+ .det_buffer_size_kbytes = 164,
+ .dpte_buffer_size_in_pte_reqs_luma = 42,
+ .dpp_output_buffer_pixels = 2560,
+ .opp_output_buffer_lines = 1,
+ .pixel_chunk_size_kbytes = 8,
+ .pte_enable = 1,
+ .pte_chunk_size_kbytes = 2,
+ .meta_chunk_size_kbytes = 2,
+ .writeback_chunk_size_kbytes = 2,
+ .line_buffer_size_bits = 589824,
+ .max_line_buffer_lines = 12,
+ .IsLineBufferBppFixed = 0,
+ .LineBufferFixedBpp = -1,
+ .writeback_luma_buffer_size_kbytes = 12,
+ .writeback_chroma_buffer_size_kbytes = 8,
+ .max_num_dpp = 4,
+ .max_num_wb = 2,
+ .max_dchub_pscl_bw_pix_per_clk = 4,
+ .max_pscl_lb_bw_pix_per_clk = 2,
+ .max_lb_vscl_bw_pix_per_clk = 4,
+ .max_vscl_hscl_bw_pix_per_clk = 4,
+ .max_hscl_ratio = 4,
+ .max_vscl_ratio = 4,
+ .hscl_mults = 4,
+ .vscl_mults = 4,
+ .max_hscl_taps = 8,
+ .max_vscl_taps = 8,
+ .dispclk_ramp_margin_percent = 1,
+ .underscan_factor = 1.10,
+ .min_vblank_lines = 14,
+ .dppclk_delay_subtotal = 90,
+ .dispclk_delay_subtotal = 42,
+ .dcfclk_cstate_latency = 10,
+ .max_inter_dcn_tile_repeaters = 8,
+ .can_vstartup_lines_exceed_vsync_plus_back_porch_lines_minus_one = 0,
+ .bug_forcing_LC_req_same_size_fixed = 0,
+};
+
+struct _vcs_dpi_soc_bounding_box_st dcn1_0_soc = {
+ .sr_exit_time_us = 9.0,
+ .sr_enter_plus_exit_time_us = 11.0,
+ .urgent_latency_us = 4.0,
+ .writeback_latency_us = 12.0,
+ .ideal_dram_bw_after_urgent_percent = 80.0,
+ .max_request_size_bytes = 256,
+ .downspread_percent = 0.5,
+ .dram_page_open_time_ns = 50.0,
+ .dram_rw_turnaround_time_ns = 17.5,
+ .dram_return_buffer_per_channel_bytes = 8192,
+ .round_trip_ping_latency_dcfclk_cycles = 128,
+ .urgent_out_of_order_return_per_channel_bytes = 256,
+ .channel_interleave_bytes = 256,
+ .num_banks = 8,
+ .num_chans = 2,
+ .vmm_page_size_bytes = 4096,
+ .dram_clock_change_latency_us = 17.0,
+ .writeback_dram_clock_change_latency_us = 23.0,
+ .return_bus_width_bytes = 64,
+};
+
new file mode 100644
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright 2021 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#ifndef __DCN10_FPU_H__
+#define __DCN10_FPU_H__
+
+#endif /* __DCN20_FPU_H__ */
FPU operations in dcn10 was already moved to dml folder via calcs code. However, dcn1_0_ip and dcn_1_0_soc with FPU componentd remains on dcn10. Following previous changes to isolate FPU, this patch creates dcn10_fpu files to isolate FPU-specific code and moves those structs to it. Signed-off-by: Melissa Wen <mwen@igalia.com> --- .../drm/amd/display/dc/dcn10/dcn10_resource.c | 62 --------- .../drm/amd/display/dc/dcn10/dcn10_resource.h | 4 + drivers/gpu/drm/amd/display/dc/dml/Makefile | 2 + .../drm/amd/display/dc/dml/dcn10/dcn10_fpu.c | 124 ++++++++++++++++++ .../drm/amd/display/dc/dml/dcn10/dcn10_fpu.h | 30 +++++ 5 files changed, 160 insertions(+), 62 deletions(-) create mode 100644 drivers/gpu/drm/amd/display/dc/dml/dcn10/dcn10_fpu.c create mode 100644 drivers/gpu/drm/amd/display/dc/dml/dcn10/dcn10_fpu.h