diff mbox series

[v6,05/11] drm: bridge: icn6211: Use DSI burst mode without EoT and with LP command mode

Message ID 20220331150509.9838-6-marex@denx.de (mailing list archive)
State New, archived
Headers show
Series drm: bridge: icn6211: Fix hard-coded panel settings and add I2C support | expand

Commit Message

Marek Vasut March 31, 2022, 3:05 p.m. UTC 
The DSI burst mode is more energy efficient than the DSI sync pulse mode,
make use of the burst mode since the chip supports it as well. Disable the
generation of EoT packet, the chip ignores it, so no point in emitting it.
Enable transmission of data in LP mode, otherwise register read via DSI
does not work with this chip.

Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
---
V2: Rebase on next-20220214
V3: Add AB from Maxime
V4: No change
V5: No change
V6: No change
---
 drivers/gpu/drm/bridge/chipone-icn6211.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/bridge/chipone-icn6211.c b/drivers/gpu/drm/bridge/chipone-icn6211.c
index d4a52176814c..e3a7b945a0ef 100644
--- a/drivers/gpu/drm/bridge/chipone-icn6211.c
+++ b/drivers/gpu/drm/bridge/chipone-icn6211.c
@@ -464,7 +464,8 @@  static int chipone_probe(struct mipi_dsi_device *dsi)
 
 	dsi->lanes = 4;
 	dsi->format = MIPI_DSI_FMT_RGB888;
-	dsi->mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET;
 
 	ret = mipi_dsi_attach(dsi);
 	if (ret < 0) {