| Message ID | 20220406160123.1272911-3-l.stach@pengutronix.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | i.MX8MP HDMI support | expand |
On Wed, 06 Apr 2022 18:01:15 +0200, Lucas Stach wrote: > The HDMI TX controller on the i.MX8MP SoC is a Synopsys designware IP > core with a little bit of SoC integration around it. > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> > --- > .../bindings/display/imx/fsl,imx8mp-hdmi.yaml | 72 +++++++++++++++++++ > 1 file changed, 72 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Error: Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.example.dts:36.45-46 syntax error FATAL ERROR: Unable to parse input tree make[1]: *** [scripts/Makefile.lib:364: Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.example.dtb] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1401: dt_binding_check] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
Am Mittwoch, dem 06.04.2022 um 15:08 -0500 schrieb Rob Herring: > On Wed, 06 Apr 2022 18:01:15 +0200, Lucas Stach wrote: > > The HDMI TX controller on the i.MX8MP SoC is a Synopsys designware IP > > core with a little bit of SoC integration around it. > > > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> > > --- > > .../bindings/display/imx/fsl,imx8mp-hdmi.yaml | 72 +++++++++++++++++++ > > 1 file changed, 72 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.yaml > > > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > Error: Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.example.dts:36.45-46 syntax error > FATAL ERROR: Unable to parse input tree > make[1]: *** [scripts/Makefile.lib:364: Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.example.dtb] Error 1 > make[1]: *** Waiting for unfinished jobs.... > make: *** [Makefile:1401: dt_binding_check] Error 2 > > doc reference errors (make refcheckdocs): > > See https://patchwork.ozlabs.org/patch/ > > This check can fail if there are any dependencies. The base for a patch > series is generally the most recent rc1. > Those failures are caused by the example referencing the power domain defines, that are only added in a dependency of this series. They build fine with all the dependencies applied, so please don't let this bot failure prevent you from looking at the actual bindings. Regards, Lucas
On Thu, Apr 07, 2022 at 11:15:26AM +0200, Lucas Stach wrote: > Am Mittwoch, dem 06.04.2022 um 15:08 -0500 schrieb Rob Herring: > > On Wed, 06 Apr 2022 18:01:15 +0200, Lucas Stach wrote: > > > The HDMI TX controller on the i.MX8MP SoC is a Synopsys designware IP > > > core with a little bit of SoC integration around it. > > > > > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> > > > --- > > > .../bindings/display/imx/fsl,imx8mp-hdmi.yaml | 72 +++++++++++++++++++ > > > 1 file changed, 72 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.yaml > > > > > > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > > > yamllint warnings/errors: > > > > dtschema/dtc warnings/errors: > > Error: Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.example.dts:36.45-46 syntax error > > FATAL ERROR: Unable to parse input tree > > make[1]: *** [scripts/Makefile.lib:364: Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.example.dtb] Error 1 > > make[1]: *** Waiting for unfinished jobs.... > > make: *** [Makefile:1401: dt_binding_check] Error 2 > > > > doc reference errors (make refcheckdocs): > > > > See https://patchwork.ozlabs.org/patch/ > > > > This check can fail if there are any dependencies. The base for a patch > > series is generally the most recent rc1. > > > Those failures are caused by the example referencing the power domain > defines, that are only added in a dependency of this series. They build > fine with all the dependencies applied, so please don't let this bot > failure prevent you from looking at the actual bindings. I review the failures. It otherwise looks fine. Rob
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.yaml new file mode 100644 index 000000000000..578062b6d64d --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8MP DWC HDMI TX Encoder + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: | + The HDMI transmitter is a Synopsys DesignWare HDMI 2.0 TX controller IP. + +allOf: + - $ref: ../bridge/synopsys,dw-hdmi.yaml# + +properties: + compatible: + enum: + - fsl,imx8mp-hdmi + + reg: + maxItems: 1 + + reg-io-width: + const: 1 + + clocks: + maxItems: 4 + + clock-names: + items: + - {} + - {} + - const: cec + - const: pix + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/power/imx8mp-power.h> + + hdmi@32fd8000 { + compatible = "fsl,imx8mp-hdmi"; + reg = <0x32fd8000 0x7eff>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_HDMI_APB>, + <&clk IMX8MP_CLK_HDMI_REF_266M>, + <&clk IMX8MP_CLK_32K>, + <&hdmi_tx_phy>; + clock-names = "iahb", "isfr", "cec", "pix"; + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>; + reg-io-width = <1>; + };
The HDMI TX controller on the i.MX8MP SoC is a Synopsys designware IP core with a little bit of SoC integration around it. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> --- .../bindings/display/imx/fsl,imx8mp-hdmi.yaml | 72 +++++++++++++++++++ 1 file changed, 72 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.yaml