@@ -1542,6 +1542,12 @@ static const struct sun4i_tcon_quirks sun9i_a80_tcon_tv_quirks = {
.needs_edp_reset = true,
};
+static const struct sun4i_tcon_quirks sun20i_d1_lcd_quirks = {
+ .has_channel_0 = true,
+ .dclk_min_div = 1,
+ .set_mux = sun8i_r40_tcon_tv_set_mux,
+};
+
/* sun4i_drv uses this list to check if a device node is a TCON */
const struct of_device_id sun4i_tcon_of_table[] = {
{ .compatible = "allwinner,sun4i-a10-tcon", .data = &sun4i_a10_quirks },
@@ -1559,6 +1565,8 @@ const struct of_device_id sun4i_tcon_of_table[] = {
{ .compatible = "allwinner,sun8i-v3s-tcon", .data = &sun8i_v3s_quirks },
{ .compatible = "allwinner,sun9i-a80-tcon-lcd", .data = &sun9i_a80_tcon_lcd_quirks },
{ .compatible = "allwinner,sun9i-a80-tcon-tv", .data = &sun9i_a80_tcon_tv_quirks },
+ { .compatible = "allwinner,sun20i-d1-tcon-lcd", .data = &sun20i_d1_lcd_quirks },
+ { .compatible = "allwinner,sun20i-d1-tcon-tv", .data = &sun8i_r40_tv_quirks },
{ }
};
MODULE_DEVICE_TABLE(of, sun4i_tcon_of_table);
D1 has a TCON TOP, so its quirks are similar to those for the R40 TCONs. While there are some register changes, the part of the TCON TV supported by the driver matches the R40 quirks, so that quirks structure can be reused. D1 has the first supported TCON LCD with a TCON TOP, so the TCON LCD needs a new quirks structure. D1's TCON LCD hardware supports LVDS; in fact it provides dual-link LVDS from a single TCON. However, it comes with a brand new LVDS PHY. Since this PHY has not been tested, leave out LVDS driver support for now. Signed-off-by: Samuel Holland <samuel@sholland.org> --- (no changes since v1) drivers/gpu/drm/sun4i/sun4i_tcon.c | 8 ++++++++ 1 file changed, 8 insertions(+)