| Message ID | 20220710194437.289042-2-marex@denx.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/9] drm/panel/panel-sitronix-st7701: Make DSI mode flags common to ST7701 | expand |
diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7701.c b/drivers/gpu/drm/panel/panel-sitronix-st7701.c index 90b0e90eb6e2..fe9f1d2fcf44 100644 --- a/drivers/gpu/drm/panel/panel-sitronix-st7701.c +++ b/drivers/gpu/drm/panel/panel-sitronix-st7701.c @@ -334,7 +334,8 @@ static int st7701_dsi_probe(struct mipi_dsi_device *dsi) return -ENOMEM; desc = of_device_get_match_data(&dsi->dev); - dsi->mode_flags = MIPI_DSI_MODE_VIDEO; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_MODE_LPM | MIPI_DSI_CLOCK_NON_CONTINUOUS; dsi->format = desc->format; dsi->lanes = desc->lanes;
The ST7701(S) is capable of DSI burst mode, which is more energy efficient than the non-burst modes. Make use of it. The ST7701(S) is capable of DSI non-continuous clock, since it sources the TFT matrix driver clock from internal clock source. The DSI non-continuous clock further reduce power utilization. The ST7701(S) uses DSI LPM for command transmissions, make sure this is configured correctly in the DSI mode flags. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Guido Günther <agx@sigxcpu.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thierry Reding <thierry.reding@gmail.com> --- drivers/gpu/drm/panel/panel-sitronix-st7701.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)