diff mbox series

[2/2] gpu/drm/panel: Add Sony TD4353 JDI panel driver

Message ID 20220712200244.960018-2-konrad.dybcio@somainline.org (mailing list archive)
State New, archived
Headers show
Series [1/2] dt-bindings: display/panel: Add Sony Tama TD4353 JDI display panel | expand

Commit Message

Konrad Dybcio July 12, 2022, 8:02 p.m. UTC
Add support for the Sony TD4353 JDI 2160x1080 display panel used in
some Sony Xperia XZ2 and XZ2 Compact smartphones. Due to the specifics
of smartphone manufacturing, it is impossible to retrieve a better name
for this panel.

This revision adds support for the default 60 Hz configuration, however
there could possibly be some room for expansion, as the display panels
used on Sony devices have historically been capable of >2x refresh rate
overclocking.
---
 drivers/gpu/drm/panel/Kconfig                 |  10 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 drivers/gpu/drm/panel/panel-sony-td4353-jdi.c | 352 ++++++++++++++++++
 3 files changed, 363 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-sony-td4353-jdi.c

Comments

Sam Ravnborg July 13, 2022, 3:15 p.m. UTC | #1
Hi Konrad,

thanks for submitting this driver. I know a new version is pending with
the bindings changes but here is a few more things to address.

	Sam


On Tue, Jul 12, 2022 at 10:02:41PM +0200, Konrad Dybcio wrote:
> Add support for the Sony TD4353 JDI 2160x1080 display panel used in
> some Sony Xperia XZ2 and XZ2 Compact smartphones. Due to the specifics
> of smartphone manufacturing, it is impossible to retrieve a better name
> for this panel.
> 
> This revision adds support for the default 60 Hz configuration, however
> there could possibly be some room for expansion, as the display panels
> used on Sony devices have historically been capable of >2x refresh rate
> overclocking.
> ---
>  drivers/gpu/drm/panel/Kconfig                 |  10 +
>  drivers/gpu/drm/panel/Makefile                |   1 +
>  drivers/gpu/drm/panel/panel-sony-td4353-jdi.c | 352 ++++++++++++++++++
>  3 files changed, 363 insertions(+)
>  create mode 100644 drivers/gpu/drm/panel/panel-sony-td4353-jdi.c
> 
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 38799effd00a..1baa0a2c36bd 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -624,6 +624,16 @@ config DRM_PANEL_SONY_ACX565AKM
>  	  Say Y here if you want to enable support for the Sony ACX565AKM
>  	  800x600 3.5" panel (found on the Nokia N900).
>  
> +config DRM_PANEL_SONY_TD4353_JDI
> +	tristate "Sony TD4353 JDI panel"
> +	depends on GPIOLIB && OF
> +	depends on DRM_MIPI_DSI
> +	depends on BACKLIGHT_CLASS_DEVICE
> +	help
> +	  Say Y here if you want to enable support for the Sony Tama
> +	  TD4353 JDI command mode panel as found on some Sony Xperia
> +	  XZ2 and XZ2 Compact smartphones.
> +
>  config DRM_PANEL_SONY_TULIP_TRULY_NT35521
>  	tristate "Sony Tulip Truly NT35521 panel"
>  	depends on GPIOLIB && OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index eabd4d6a1845..df8a6b707dbb 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -63,6 +63,7 @@ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
>  obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
>  obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
>  obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
> +obj-$(CONFIG_DRM_PANEL_SONY_TD4353_JDI) += panel-sony-td4353-jdi.o
>  obj-$(CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521) += panel-sony-tulip-truly-nt35521.o
>  obj-$(CONFIG_DRM_PANEL_TDO_TL070WSH30) += panel-tdo-tl070wsh30.o
>  obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
> diff --git a/drivers/gpu/drm/panel/panel-sony-td4353-jdi.c b/drivers/gpu/drm/panel/panel-sony-td4353-jdi.c
> new file mode 100644
> index 000000000000..8bc2e55af63c
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-sony-td4353-jdi.c
> @@ -0,0 +1,352 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022 Konrad Dybcio <konrad.dybcio@somainline.org>
> + *
> + * Generated with linux-mdss-dsi-panel-driver-generator with a
> + * substantial amount of manual adjustments.
> + *
> + * SONY Downstream kernel calls this one:
> + * - "JDI ID3" for Akari
> + * - "JDI ID4" for Apollo
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +
> +enum {
> +	TYPE_AKARI_60HZ,
> +	TYPE_APOLLO_60HZ
> +};
> +
> +struct sony_td4353_jdi {
> +	struct drm_panel panel;
> +	struct mipi_dsi_device *dsi;
> +	struct regulator_bulk_data supplies[3];
> +	struct gpio_desc *preset_gpio;
> +	struct gpio_desc *treset_gpio;
> +	bool prepared;
> +	int type;
> +};
> +
> +static inline struct sony_td4353_jdi *to_sony_td4353_jdi(struct drm_panel *panel)
> +{
> +	return container_of(panel, struct sony_td4353_jdi, panel);
> +}
> +
> +#define dsi_dcs_write_seq(dsi, seq...) do {				\
> +		static const u8 d[] = { seq };				\
> +		int ret;						\
> +		ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d));	\
> +		if (ret < 0)						\
> +			return ret;					\
> +	} while (0)
Use the one already defined in drm_mipi_dsi - we do not want extra
copies of the same.


> +
> +static int sony_td4353_jdi_on(struct sony_td4353_jdi *ctx)

Maybe this is just me, but I had expected that a function named "on"
would enable the power supply.

> +{
> +	struct mipi_dsi_device *dsi = ctx->dsi;
> +	struct device *dev = &dsi->dev;
> +	int ret;
> +
> +	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> +	ret = mipi_dsi_dcs_set_column_address(dsi, 0x0000, 0x0437);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set column address: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = mipi_dsi_dcs_set_page_address(dsi, 0x0000, 0x086f);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set page address: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = mipi_dsi_dcs_set_tear_scanline(dsi, 0x0000);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set tear scanline: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set tear on: %d\n", ret);
> +		return ret;
> +	}
> +
> +	dsi_dcs_write_seq(dsi, MIPI_DCS_SET_ADDRESS_MODE, 0x00);
> +
> +	ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x77);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set pixel format: %d\n", ret);
> +		return ret;
> +	}
> +
> +	dsi_dcs_write_seq(dsi, MIPI_DCS_SET_PARTIAL_ROWS,
> +			  0x00, 0x00, 0x08, 0x6f);
> +
> +	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
> +		return ret;
> +	}
> +	msleep(70);
> +
> +	dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_MEMORY_START);
> +
> +	ret = mipi_dsi_dcs_set_display_on(dsi);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to turn display on: %d\n", ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int sony_td4353_jdi_off(struct sony_td4353_jdi *ctx)
> +{
> +	struct mipi_dsi_device *dsi = ctx->dsi;
> +	struct device *dev = &dsi->dev;
> +	int ret;
> +
> +	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> +	ret = mipi_dsi_dcs_set_display_off(dsi);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set display off: %d\n", ret);
> +		return ret;
> +	}
> +	msleep(22);
> +
> +	ret = mipi_dsi_dcs_set_tear_off(dsi);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set tear off: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
> +		return ret;
> +	}
> +	msleep(80);
> +
> +	return 0;
> +}
> +
> +static int sony_td4353_jdi_prepare(struct drm_panel *panel)
> +{
> +	struct sony_td4353_jdi *ctx = to_sony_td4353_jdi(panel);
> +	struct device *dev = &ctx->dsi->dev;
> +	int ret;
> +
> +	if (ctx->prepared)
> +		return 0;
> +
> +	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to enable regulators: %d\n", ret);
> +		return ret;
> +	}
> +
> +	msleep(100);
> +
> +	gpiod_set_value_cansleep(ctx->treset_gpio, 1);
> +	gpiod_set_value_cansleep(ctx->preset_gpio, 1);
> +	usleep_range(5000, 5100);
> +
> +	ret = sony_td4353_jdi_on(ctx);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to power on panel: %d\n", ret);
> +		gpiod_set_value_cansleep(ctx->preset_gpio, 0);
> +		gpiod_set_value_cansleep(ctx->treset_gpio, 0);
> +		regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
The above sequence is almost the same as used in unprepare.
Maybe do it in a helper. Then the steps will also be the same - right
now treset is set to 0 either before or after power supplies are
disabled. The difference is confusing.

> +		return ret;
> +	}
> +
> +	ctx->prepared = true;
> +	return 0;
> +}
> +
> +static int sony_td4353_jdi_unprepare(struct drm_panel *panel)
> +{
> +	struct sony_td4353_jdi *ctx = to_sony_td4353_jdi(panel);
> +	struct device *dev = &ctx->dsi->dev;
> +	int ret;
> +
> +	if (!ctx->prepared)
> +		return 0;
> +
> +	ret = sony_td4353_jdi_off(ctx);
> +	if (ret < 0)
> +		dev_err(dev, "Failed to power off panel: %d\n", ret);
> +
> +	gpiod_set_value_cansleep(ctx->preset_gpio, 0);
> +	regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> +
> +	gpiod_set_value_cansleep(ctx->treset_gpio, 0);
> +	usleep_range(5000, 5100);
> +
> +	ctx->prepared = false;
> +	return 0;
> +}
> +
> +static const struct drm_display_mode sony_td4353_jdi_mode_akari_60hz = {
> +	.clock = (1080 + 4 + 8 + 8) * (2160 + 259 + 8 + 8) * 60 / 1000,
> +	.hdisplay = 1080,
> +	.hsync_start = 1080 + 4,
> +	.hsync_end = 1080 + 4 + 8,
> +	.htotal = 1080 + 4 + 8 + 8,
> +	.vdisplay = 2160,
> +	.vsync_start = 2160 + 259,
> +	.vsync_end = 2160 + 259 + 8,
> +	.vtotal = 2160 + 259 + 8 + 8,
> +	.width_mm = 64,
> +	.height_mm = 128,
> +};
> +
> +static const struct drm_display_mode sony_td4353_jdi_mode_apollo_60hz = {
> +	.clock = (1080 + 4 + 8 + 8) * (2160 + 259 + 8 + 8) * 60 / 1000,
> +	.hdisplay = 1080,
> +	.hsync_start = 1080 + 4,
> +	.hsync_end = 1080 + 4 + 8,
> +	.htotal = 1080 + 4 + 8 + 8,
> +	.vdisplay = 2160,
> +	.vsync_start = 2160 + 259,
> +	.vsync_end = 2160 + 259 + 8,
> +	.vtotal = 2160 + 259 + 8 + 8,
> +	.width_mm = 56,
> +	.height_mm = 112,
> +};
> +
> +static int sony_td4353_jdi_get_modes(struct drm_panel *panel,
> +				   struct drm_connector *connector)
> +{
> +	struct sony_td4353_jdi *ctx = to_sony_td4353_jdi(panel);
> +	struct drm_display_mode *mode = NULL;
> +
> +	if (ctx->type == TYPE_AKARI_60HZ)
> +		mode = drm_mode_duplicate(connector->dev, &sony_td4353_jdi_mode_akari_60hz);
> +	else if (ctx->type == TYPE_APOLLO_60HZ)
> +		mode = drm_mode_duplicate(connector->dev, &sony_td4353_jdi_mode_apollo_60hz);
> +	else
> +		return -EINVAL;
> +
> +	if (!mode)
> +		return -ENOMEM;
> +
> +	drm_mode_set_name(mode);
> +
> +	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> +	connector->display_info.width_mm = mode->width_mm;
> +	connector->display_info.height_mm = mode->height_mm;
> +	drm_mode_probed_add(connector, mode);
> +
> +	return 1;
> +}
> +
> +static const struct drm_panel_funcs sony_td4353_jdi_panel_funcs = {
> +	.prepare = sony_td4353_jdi_prepare,
> +	.unprepare = sony_td4353_jdi_unprepare,
> +	.get_modes = sony_td4353_jdi_get_modes,
> +};
> +
> +static int sony_td4353_jdi_probe(struct mipi_dsi_device *dsi)
> +{
> +	struct device *dev = &dsi->dev;
> +	struct sony_td4353_jdi *ctx;
> +	int ret;
> +
> +	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> +	if (!ctx)
> +		return -ENOMEM;
> +
> +	ctx->type = (uintptr_t)of_device_get_match_data(dev);
> +
> +	ctx->supplies[0].supply = "vddio";
> +	ctx->supplies[1].supply = "vsp";
> +	ctx->supplies[2].supply = "vsn";
> +	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
> +				      ctx->supplies);
> +	if (ret < 0)
> +		return dev_err_probe(dev, ret, "Failed to get regulators\n");
> +
> +	ctx->preset_gpio = devm_gpiod_get(dev, "preset", GPIOD_ASIS);
> +	if (IS_ERR(ctx->preset_gpio))
> +		return dev_err_probe(dev, PTR_ERR(ctx->preset_gpio),
> +				     "Failed to get preset-gpios\n");
> +
> +	ctx->treset_gpio = devm_gpiod_get(dev, "treset", GPIOD_ASIS);
> +	if (IS_ERR(ctx->treset_gpio))
> +		return dev_err_probe(dev, PTR_ERR(ctx->treset_gpio),
> +				     "Failed to get treset-gpios\n");
> +
> +	ctx->dsi = dsi;
> +	mipi_dsi_set_drvdata(dsi, ctx);
> +
> +	dsi->lanes = 4;
> +	dsi->format = MIPI_DSI_FMT_RGB888;
> +	dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS;
> +
> +	drm_panel_init(&ctx->panel, dev, &sony_td4353_jdi_panel_funcs,
> +		       DRM_MODE_CONNECTOR_DSI);
> +
> +	ret = drm_panel_of_backlight(&ctx->panel);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to get backlight\n");
> +
> +	drm_panel_add(&ctx->panel);
> +
> +	ret = mipi_dsi_attach(dsi);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
> +		drm_panel_remove(&ctx->panel);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int sony_td4353_jdi_remove(struct mipi_dsi_device *dsi)
In latest drm-misc-next tree this function returns a void - and this
needs to be adjusted accordingly.

> +{
> +	struct sony_td4353_jdi *ctx = mipi_dsi_get_drvdata(dsi);
> +	int ret;
> +
> +	ret = mipi_dsi_detach(dsi);
> +	if (ret < 0)
> +		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
> +
> +	drm_panel_remove(&ctx->panel);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id sony_td4353_jdi_of_match[] = {
> +	{ .compatible = "sony,td4353-jdi-akari", .data = (void *)TYPE_AKARI_60HZ },
> +	{ .compatible = "sony,td4353-jdi-apollo", .data = (void *)TYPE_APOLLO_60HZ },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, sony_td4353_jdi_of_match);
> +
> +static struct mipi_dsi_driver sony_td4353_jdi_driver = {
> +	.probe = sony_td4353_jdi_probe,
> +	.remove = sony_td4353_jdi_remove,
> +	.driver = {
> +		.name = "panel-sony-td4353-jdi",
> +		.of_match_table = sony_td4353_jdi_of_match,
> +	},
> +};
> +module_mipi_dsi_driver(sony_td4353_jdi_driver);
> +
> +MODULE_AUTHOR("Konrad Dybcio <konrad.dybcio@somainline.org>");
> +MODULE_DESCRIPTION("DRM panel driver for SONY Xperia XZ2/XZ2c JDI panel");
> +MODULE_LICENSE("GPL v2");
> -- 
> 2.37.0
diff mbox series

Patch

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 38799effd00a..1baa0a2c36bd 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -624,6 +624,16 @@  config DRM_PANEL_SONY_ACX565AKM
 	  Say Y here if you want to enable support for the Sony ACX565AKM
 	  800x600 3.5" panel (found on the Nokia N900).
 
+config DRM_PANEL_SONY_TD4353_JDI
+	tristate "Sony TD4353 JDI panel"
+	depends on GPIOLIB && OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the Sony Tama
+	  TD4353 JDI command mode panel as found on some Sony Xperia
+	  XZ2 and XZ2 Compact smartphones.
+
 config DRM_PANEL_SONY_TULIP_TRULY_NT35521
 	tristate "Sony Tulip Truly NT35521 panel"
 	depends on GPIOLIB && OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index eabd4d6a1845..df8a6b707dbb 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -63,6 +63,7 @@  obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
 obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
 obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
 obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
+obj-$(CONFIG_DRM_PANEL_SONY_TD4353_JDI) += panel-sony-td4353-jdi.o
 obj-$(CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521) += panel-sony-tulip-truly-nt35521.o
 obj-$(CONFIG_DRM_PANEL_TDO_TL070WSH30) += panel-tdo-tl070wsh30.o
 obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
diff --git a/drivers/gpu/drm/panel/panel-sony-td4353-jdi.c b/drivers/gpu/drm/panel/panel-sony-td4353-jdi.c
new file mode 100644
index 000000000000..8bc2e55af63c
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-sony-td4353-jdi.c
@@ -0,0 +1,352 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022 Konrad Dybcio <konrad.dybcio@somainline.org>
+ *
+ * Generated with linux-mdss-dsi-panel-driver-generator with a
+ * substantial amount of manual adjustments.
+ *
+ * SONY Downstream kernel calls this one:
+ * - "JDI ID3" for Akari
+ * - "JDI ID4" for Apollo
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+enum {
+	TYPE_AKARI_60HZ,
+	TYPE_APOLLO_60HZ
+};
+
+struct sony_td4353_jdi {
+	struct drm_panel panel;
+	struct mipi_dsi_device *dsi;
+	struct regulator_bulk_data supplies[3];
+	struct gpio_desc *preset_gpio;
+	struct gpio_desc *treset_gpio;
+	bool prepared;
+	int type;
+};
+
+static inline struct sony_td4353_jdi *to_sony_td4353_jdi(struct drm_panel *panel)
+{
+	return container_of(panel, struct sony_td4353_jdi, panel);
+}
+
+#define dsi_dcs_write_seq(dsi, seq...) do {				\
+		static const u8 d[] = { seq };				\
+		int ret;						\
+		ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d));	\
+		if (ret < 0)						\
+			return ret;					\
+	} while (0)
+
+static int sony_td4353_jdi_on(struct sony_td4353_jdi *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_column_address(dsi, 0x0000, 0x0437);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set column address: %d\n", ret);
+		return ret;
+	}
+
+	ret = mipi_dsi_dcs_set_page_address(dsi, 0x0000, 0x086f);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set page address: %d\n", ret);
+		return ret;
+	}
+
+	ret = mipi_dsi_dcs_set_tear_scanline(dsi, 0x0000);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set tear scanline: %d\n", ret);
+		return ret;
+	}
+
+	ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set tear on: %d\n", ret);
+		return ret;
+	}
+
+	dsi_dcs_write_seq(dsi, MIPI_DCS_SET_ADDRESS_MODE, 0x00);
+
+	ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x77);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set pixel format: %d\n", ret);
+		return ret;
+	}
+
+	dsi_dcs_write_seq(dsi, MIPI_DCS_SET_PARTIAL_ROWS,
+			  0x00, 0x00, 0x08, 0x6f);
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
+		return ret;
+	}
+	msleep(70);
+
+	dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_MEMORY_START);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to turn display on: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int sony_td4353_jdi_off(struct sony_td4353_jdi *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display off: %d\n", ret);
+		return ret;
+	}
+	msleep(22);
+
+	ret = mipi_dsi_dcs_set_tear_off(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set tear off: %d\n", ret);
+		return ret;
+	}
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
+		return ret;
+	}
+	msleep(80);
+
+	return 0;
+}
+
+static int sony_td4353_jdi_prepare(struct drm_panel *panel)
+{
+	struct sony_td4353_jdi *ctx = to_sony_td4353_jdi(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	if (ctx->prepared)
+		return 0;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enable regulators: %d\n", ret);
+		return ret;
+	}
+
+	msleep(100);
+
+	gpiod_set_value_cansleep(ctx->treset_gpio, 1);
+	gpiod_set_value_cansleep(ctx->preset_gpio, 1);
+	usleep_range(5000, 5100);
+
+	ret = sony_td4353_jdi_on(ctx);
+	if (ret < 0) {
+		dev_err(dev, "Failed to power on panel: %d\n", ret);
+		gpiod_set_value_cansleep(ctx->preset_gpio, 0);
+		gpiod_set_value_cansleep(ctx->treset_gpio, 0);
+		regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+		return ret;
+	}
+
+	ctx->prepared = true;
+	return 0;
+}
+
+static int sony_td4353_jdi_unprepare(struct drm_panel *panel)
+{
+	struct sony_td4353_jdi *ctx = to_sony_td4353_jdi(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	if (!ctx->prepared)
+		return 0;
+
+	ret = sony_td4353_jdi_off(ctx);
+	if (ret < 0)
+		dev_err(dev, "Failed to power off panel: %d\n", ret);
+
+	gpiod_set_value_cansleep(ctx->preset_gpio, 0);
+	regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+
+	gpiod_set_value_cansleep(ctx->treset_gpio, 0);
+	usleep_range(5000, 5100);
+
+	ctx->prepared = false;
+	return 0;
+}
+
+static const struct drm_display_mode sony_td4353_jdi_mode_akari_60hz = {
+	.clock = (1080 + 4 + 8 + 8) * (2160 + 259 + 8 + 8) * 60 / 1000,
+	.hdisplay = 1080,
+	.hsync_start = 1080 + 4,
+	.hsync_end = 1080 + 4 + 8,
+	.htotal = 1080 + 4 + 8 + 8,
+	.vdisplay = 2160,
+	.vsync_start = 2160 + 259,
+	.vsync_end = 2160 + 259 + 8,
+	.vtotal = 2160 + 259 + 8 + 8,
+	.width_mm = 64,
+	.height_mm = 128,
+};
+
+static const struct drm_display_mode sony_td4353_jdi_mode_apollo_60hz = {
+	.clock = (1080 + 4 + 8 + 8) * (2160 + 259 + 8 + 8) * 60 / 1000,
+	.hdisplay = 1080,
+	.hsync_start = 1080 + 4,
+	.hsync_end = 1080 + 4 + 8,
+	.htotal = 1080 + 4 + 8 + 8,
+	.vdisplay = 2160,
+	.vsync_start = 2160 + 259,
+	.vsync_end = 2160 + 259 + 8,
+	.vtotal = 2160 + 259 + 8 + 8,
+	.width_mm = 56,
+	.height_mm = 112,
+};
+
+static int sony_td4353_jdi_get_modes(struct drm_panel *panel,
+				   struct drm_connector *connector)
+{
+	struct sony_td4353_jdi *ctx = to_sony_td4353_jdi(panel);
+	struct drm_display_mode *mode = NULL;
+
+	if (ctx->type == TYPE_AKARI_60HZ)
+		mode = drm_mode_duplicate(connector->dev, &sony_td4353_jdi_mode_akari_60hz);
+	else if (ctx->type == TYPE_APOLLO_60HZ)
+		mode = drm_mode_duplicate(connector->dev, &sony_td4353_jdi_mode_apollo_60hz);
+	else
+		return -EINVAL;
+
+	if (!mode)
+		return -ENOMEM;
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs sony_td4353_jdi_panel_funcs = {
+	.prepare = sony_td4353_jdi_prepare,
+	.unprepare = sony_td4353_jdi_unprepare,
+	.get_modes = sony_td4353_jdi_get_modes,
+};
+
+static int sony_td4353_jdi_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct sony_td4353_jdi *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->type = (uintptr_t)of_device_get_match_data(dev);
+
+	ctx->supplies[0].supply = "vddio";
+	ctx->supplies[1].supply = "vsp";
+	ctx->supplies[2].supply = "vsn";
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+				      ctx->supplies);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Failed to get regulators\n");
+
+	ctx->preset_gpio = devm_gpiod_get(dev, "preset", GPIOD_ASIS);
+	if (IS_ERR(ctx->preset_gpio))
+		return dev_err_probe(dev, PTR_ERR(ctx->preset_gpio),
+				     "Failed to get preset-gpios\n");
+
+	ctx->treset_gpio = devm_gpiod_get(dev, "treset", GPIOD_ASIS);
+	if (IS_ERR(ctx->treset_gpio))
+		return dev_err_probe(dev, PTR_ERR(ctx->treset_gpio),
+				     "Failed to get treset-gpios\n");
+
+	ctx->dsi = dsi;
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+	drm_panel_init(&ctx->panel, dev, &sony_td4353_jdi_panel_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+
+	ret = drm_panel_of_backlight(&ctx->panel);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get backlight\n");
+
+	drm_panel_add(&ctx->panel);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
+		drm_panel_remove(&ctx->panel);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int sony_td4353_jdi_remove(struct mipi_dsi_device *dsi)
+{
+	struct sony_td4353_jdi *ctx = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	ret = mipi_dsi_detach(dsi);
+	if (ret < 0)
+		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
+
+	drm_panel_remove(&ctx->panel);
+
+	return 0;
+}
+
+static const struct of_device_id sony_td4353_jdi_of_match[] = {
+	{ .compatible = "sony,td4353-jdi-akari", .data = (void *)TYPE_AKARI_60HZ },
+	{ .compatible = "sony,td4353-jdi-apollo", .data = (void *)TYPE_APOLLO_60HZ },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sony_td4353_jdi_of_match);
+
+static struct mipi_dsi_driver sony_td4353_jdi_driver = {
+	.probe = sony_td4353_jdi_probe,
+	.remove = sony_td4353_jdi_remove,
+	.driver = {
+		.name = "panel-sony-td4353-jdi",
+		.of_match_table = sony_td4353_jdi_of_match,
+	},
+};
+module_mipi_dsi_driver(sony_td4353_jdi_driver);
+
+MODULE_AUTHOR("Konrad Dybcio <konrad.dybcio@somainline.org>");
+MODULE_DESCRIPTION("DRM panel driver for SONY Xperia XZ2/XZ2c JDI panel");
+MODULE_LICENSE("GPL v2");