diff mbox series

[v2] drm/msm: Make .remove and .shutdown HW shutdown consistent

Message ID 20220724111327.1195693-1-javierm@redhat.com (mailing list archive)
State Superseded
Headers show
Series [v2] drm/msm: Make .remove and .shutdown HW shutdown consistent | expand

Commit Message

Javier Martinez Canillas July 24, 2022, 11:13 a.m. UTC
Drivers' .remove and .shutdown callbacks are executed on different code
paths. The former is called when a device is removed from the bus, while
the latter is called at system shutdown time to quiesce the device.

This means that some overlap exists between the two, because both have to
take care of properly shutting down the hardware. But currently the logic
used in these two callbacks isn't consistent in msm drivers, which could
lead to kernel oops.

For example, on .remove the component is deleted and its .unbind callback
leads to the hardware being shutdown but only if the DRM device has been
marked as registered.

That check doesn't exist in the .shutdown logic and this can lead to the
driver calling drm_atomic_helper_shutdown() for a DRM device that hasn't
been properly initialized.

A situation like this can happen if drivers for expected sub-devices fail
to probe, since the .bind callback will never be executed. If that is the
case, drm_atomic_helper_shutdown() will attempt to take mutexes that are
only initialized if drm_mode_config_init() is called during a device bind.

This bug was attempted to be fixed in commit 623f279c7781 ("drm/msm: fix
shutdown hook in case GPU components failed to bind"), but unfortunately
it still happens in some cases as the one mentioned above, i.e:

[  169.495897] systemd-shutdown[1]: Powering off.
[  169.500466] kvm: exiting hardware virtualization
[  169.554787] platform wifi-firmware.0: Removing from iommu group 12
[  169.610238] platform video-firmware.0: Removing from iommu group 10
[  169.682164] ------------[ cut here ]------------
[  169.686909] WARNING: CPU: 6 PID: 1 at drivers/gpu/drm/drm_modeset_lock.c:317 drm_modeset_lock_all_ctx+0x3c4/0x3d0
...
[  169.775691] Hardware name: Google CoachZ (rev3+) (DT)
[  169.780874] pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  169.788021] pc : drm_modeset_lock_all_ctx+0x3c4/0x3d0
[  169.793205] lr : drm_modeset_lock_all_ctx+0x48/0x3d0
[  169.798299] sp : ffff80000805bb80
[  169.801701] x29: ffff80000805bb80 x28: ffff327c00128000 x27: 0000000000000000
[  169.809025] x26: 0000000000000000 x25: 0000000000000001 x24: ffffc95d820ec030
[  169.816349] x23: ffff327c00bbd090 x22: ffffc95d8215eca0 x21: ffff327c039c5800
[  169.823674] x20: ffff327c039c5988 x19: ffff80000805bbe8 x18: 0000000000000034
[  169.830998] x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000
[  169.838322] x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000
[  169.845646] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[  169.852971] x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000
[  169.860295] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[  169.867619] x2 : ffff327c00128000 x1 : 0000000000000000 x0 : ffff327c039c59b0
[  169.874944] Call trace:
[  169.877467]  drm_modeset_lock_all_ctx+0x3c4/0x3d0
[  169.882297]  drm_atomic_helper_shutdown+0x70/0x134
[  169.887217]  msm_drv_shutdown+0x30/0x40
[  169.891159]  platform_shutdown+0x28/0x40
[  169.895191]  device_shutdown+0x148/0x350
[  169.899221]  kernel_power_off+0x38/0x80
[  169.903163]  __do_sys_reboot+0x288/0x2c0
[  169.907192]  __arm64_sys_reboot+0x28/0x34
[  169.911309]  invoke_syscall+0x48/0x114
[  169.915162]  el0_svc_common.constprop.0+0x44/0xec
[  169.919992]  do_el0_svc+0x2c/0xc0
[  169.923394]  el0_svc+0x2c/0x84
[  169.926535]  el0t_64_sync_handler+0x11c/0x150
[  169.931013]  el0t_64_sync+0x18c/0x190
[  169.934777] ---[ end trace 0000000000000000 ]---
[  169.939557] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
[  169.948574] Mem abort info:
[  169.951452]   ESR = 0x0000000096000004
[  169.955307]   EC = 0x25: DABT (current EL), IL = 32 bits
[  169.960765]   SET = 0, FnV = 0
[  169.963901]   EA = 0, S1PTW = 0
[  169.967127]   FSC = 0x04: level 0 translation fault
[  169.972136] Data abort info:
[  169.975093]   ISV = 0, ISS = 0x00000004
[  169.979037]   CM = 0, WnR = 0
[  169.982083] user pgtable: 4k pages, 48-bit VAs, pgdp=000000010eab1000
[  169.988697] [0000000000000018] pgd=0000000000000000, p4d=0000000000000000
[  169.995669] Internal error: Oops: 96000004 [#1] PREEMPT SMP
...
[  170.079614] Hardware name: Google CoachZ (rev3+) (DT)
[  170.084801] pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  170.091941] pc : ww_mutex_lock+0x28/0x32c
[  170.096064] lr : drm_modeset_lock_all_ctx+0x1b0/0x3d0
[  170.101254] sp : ffff80000805bb50
[  170.104658] x29: ffff80000805bb50 x28: ffff327c00128000 x27: 0000000000000000
[  170.111977] x26: 0000000000000000 x25: 0000000000000001 x24: 0000000000000018
[  170.119296] x23: ffff80000805bc10 x22: ffff327c039c5ad8 x21: ffff327c039c5800
[  170.126615] x20: ffff80000805bbe8 x19: 0000000000000018 x18: 0000000000000034
[  170.133933] x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000
[  170.141252] x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000
[  170.148571] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[  170.155890] x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000
[  170.163209] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[  170.170528] x2 : ffff327c00128000 x1 : 0000000000000000 x0 : 0000000000000018
[  170.177847] Call trace:
[  170.180364]  ww_mutex_lock+0x28/0x32c
[  170.184127]  drm_modeset_lock_all_ctx+0x1b0/0x3d0
[  170.188957]  drm_atomic_helper_shutdown+0x70/0x134
[  170.193876]  msm_drv_shutdown+0x30/0x40
[  170.197820]  platform_shutdown+0x28/0x40
[  170.201854]  device_shutdown+0x148/0x350
[  170.205888]  kernel_power_off+0x38/0x80
[  170.209832]  __do_sys_reboot+0x288/0x2c0
[  170.213866]  __arm64_sys_reboot+0x28/0x34
[  170.217990]  invoke_syscall+0x48/0x114
[  170.221843]  el0_svc_common.constprop.0+0x44/0xec
[  170.226672]  do_el0_svc+0x2c/0xc0
[  170.230079]  el0_svc+0x2c/0x84
[  170.233215]  el0t_64_sync_handler+0x11c/0x150
[  170.237686]  el0t_64_sync+0x18c/0x190
[  170.241451] Code: aa0103f4 d503201f d2800001 aa0103e3 (c8e37c02)
[  170.247704] ---[ end trace 0000000000000000 ]---
[  170.252457] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[  170.260654] Kernel Offset: 0x495d77c00000 from 0xffff800008000000
[  170.266910] PHYS_OFFSET: 0xffffcd8500000000
[  170.271212] CPU features: 0x800,00c2a015,19801c82
[  170.276042] Memory Limit: none
[  170.279183] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---

Fixes: 623f279c7781 ("drm/msm: fix shutdown hook in case GPU components failed to bind")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
---

Changes in v2:
- Take the registered check out of the msm_shutdown_hw() and make callers to check instead.
- Make msm_shutdown_hw() an inline function.
- Add a Fixes: tag.

 drivers/gpu/drm/msm/msm_drv.c | 29 +++++++++++++++++------------
 1 file changed, 17 insertions(+), 12 deletions(-)

Comments

Dmitry Baryshkov July 24, 2022, 6:36 p.m. UTC | #1
On Sun, 24 Jul 2022 at 14:13, Javier Martinez Canillas
<javierm@redhat.com> wrote:
>
> Drivers' .remove and .shutdown callbacks are executed on different code
> paths. The former is called when a device is removed from the bus, while
> the latter is called at system shutdown time to quiesce the device.
>
> This means that some overlap exists between the two, because both have to
> take care of properly shutting down the hardware. But currently the logic
> used in these two callbacks isn't consistent in msm drivers, which could
> lead to kernel oops.
>
> For example, on .remove the component is deleted and its .unbind callback
> leads to the hardware being shutdown but only if the DRM device has been
> marked as registered.
>
> That check doesn't exist in the .shutdown logic and this can lead to the
> driver calling drm_atomic_helper_shutdown() for a DRM device that hasn't
> been properly initialized.
>
> A situation like this can happen if drivers for expected sub-devices fail
> to probe, since the .bind callback will never be executed. If that is the
> case, drm_atomic_helper_shutdown() will attempt to take mutexes that are
> only initialized if drm_mode_config_init() is called during a device bind.
>
> This bug was attempted to be fixed in commit 623f279c7781 ("drm/msm: fix
> shutdown hook in case GPU components failed to bind"), but unfortunately
> it still happens in some cases as the one mentioned above, i.e:
>
> [  169.495897] systemd-shutdown[1]: Powering off.
> [  169.500466] kvm: exiting hardware virtualization
> [  169.554787] platform wifi-firmware.0: Removing from iommu group 12
> [  169.610238] platform video-firmware.0: Removing from iommu group 10
> [  169.682164] ------------[ cut here ]------------
> [  169.686909] WARNING: CPU: 6 PID: 1 at drivers/gpu/drm/drm_modeset_lock.c:317 drm_modeset_lock_all_ctx+0x3c4/0x3d0
> ...
> [  169.775691] Hardware name: Google CoachZ (rev3+) (DT)
> [  169.780874] pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [  169.788021] pc : drm_modeset_lock_all_ctx+0x3c4/0x3d0
> [  169.793205] lr : drm_modeset_lock_all_ctx+0x48/0x3d0
> [  169.798299] sp : ffff80000805bb80
> [  169.801701] x29: ffff80000805bb80 x28: ffff327c00128000 x27: 0000000000000000
> [  169.809025] x26: 0000000000000000 x25: 0000000000000001 x24: ffffc95d820ec030
> [  169.816349] x23: ffff327c00bbd090 x22: ffffc95d8215eca0 x21: ffff327c039c5800
> [  169.823674] x20: ffff327c039c5988 x19: ffff80000805bbe8 x18: 0000000000000034
> [  169.830998] x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000
> [  169.838322] x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000
> [  169.845646] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
> [  169.852971] x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000
> [  169.860295] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
> [  169.867619] x2 : ffff327c00128000 x1 : 0000000000000000 x0 : ffff327c039c59b0
> [  169.874944] Call trace:
> [  169.877467]  drm_modeset_lock_all_ctx+0x3c4/0x3d0
> [  169.882297]  drm_atomic_helper_shutdown+0x70/0x134
> [  169.887217]  msm_drv_shutdown+0x30/0x40
> [  169.891159]  platform_shutdown+0x28/0x40
> [  169.895191]  device_shutdown+0x148/0x350
> [  169.899221]  kernel_power_off+0x38/0x80
> [  169.903163]  __do_sys_reboot+0x288/0x2c0
> [  169.907192]  __arm64_sys_reboot+0x28/0x34
> [  169.911309]  invoke_syscall+0x48/0x114
> [  169.915162]  el0_svc_common.constprop.0+0x44/0xec
> [  169.919992]  do_el0_svc+0x2c/0xc0
> [  169.923394]  el0_svc+0x2c/0x84
> [  169.926535]  el0t_64_sync_handler+0x11c/0x150
> [  169.931013]  el0t_64_sync+0x18c/0x190
> [  169.934777] ---[ end trace 0000000000000000 ]---
> [  169.939557] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
> [  169.948574] Mem abort info:
> [  169.951452]   ESR = 0x0000000096000004
> [  169.955307]   EC = 0x25: DABT (current EL), IL = 32 bits
> [  169.960765]   SET = 0, FnV = 0
> [  169.963901]   EA = 0, S1PTW = 0
> [  169.967127]   FSC = 0x04: level 0 translation fault
> [  169.972136] Data abort info:
> [  169.975093]   ISV = 0, ISS = 0x00000004
> [  169.979037]   CM = 0, WnR = 0
> [  169.982083] user pgtable: 4k pages, 48-bit VAs, pgdp=000000010eab1000
> [  169.988697] [0000000000000018] pgd=0000000000000000, p4d=0000000000000000
> [  169.995669] Internal error: Oops: 96000004 [#1] PREEMPT SMP
> ...
> [  170.079614] Hardware name: Google CoachZ (rev3+) (DT)
> [  170.084801] pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [  170.091941] pc : ww_mutex_lock+0x28/0x32c
> [  170.096064] lr : drm_modeset_lock_all_ctx+0x1b0/0x3d0
> [  170.101254] sp : ffff80000805bb50
> [  170.104658] x29: ffff80000805bb50 x28: ffff327c00128000 x27: 0000000000000000
> [  170.111977] x26: 0000000000000000 x25: 0000000000000001 x24: 0000000000000018
> [  170.119296] x23: ffff80000805bc10 x22: ffff327c039c5ad8 x21: ffff327c039c5800
> [  170.126615] x20: ffff80000805bbe8 x19: 0000000000000018 x18: 0000000000000034
> [  170.133933] x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000
> [  170.141252] x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000
> [  170.148571] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
> [  170.155890] x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000
> [  170.163209] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
> [  170.170528] x2 : ffff327c00128000 x1 : 0000000000000000 x0 : 0000000000000018
> [  170.177847] Call trace:
> [  170.180364]  ww_mutex_lock+0x28/0x32c
> [  170.184127]  drm_modeset_lock_all_ctx+0x1b0/0x3d0
> [  170.188957]  drm_atomic_helper_shutdown+0x70/0x134
> [  170.193876]  msm_drv_shutdown+0x30/0x40
> [  170.197820]  platform_shutdown+0x28/0x40
> [  170.201854]  device_shutdown+0x148/0x350
> [  170.205888]  kernel_power_off+0x38/0x80
> [  170.209832]  __do_sys_reboot+0x288/0x2c0
> [  170.213866]  __arm64_sys_reboot+0x28/0x34
> [  170.217990]  invoke_syscall+0x48/0x114
> [  170.221843]  el0_svc_common.constprop.0+0x44/0xec
> [  170.226672]  do_el0_svc+0x2c/0xc0
> [  170.230079]  el0_svc+0x2c/0x84
> [  170.233215]  el0t_64_sync_handler+0x11c/0x150
> [  170.237686]  el0t_64_sync+0x18c/0x190
> [  170.241451] Code: aa0103f4 d503201f d2800001 aa0103e3 (c8e37c02)
> [  170.247704] ---[ end trace 0000000000000000 ]---
> [  170.252457] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
> [  170.260654] Kernel Offset: 0x495d77c00000 from 0xffff800008000000
> [  170.266910] PHYS_OFFSET: 0xffffcd8500000000
> [  170.271212] CPU features: 0x800,00c2a015,19801c82
> [  170.276042] Memory Limit: none
> [  170.279183] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
>
> Fixes: 623f279c7781 ("drm/msm: fix shutdown hook in case GPU components failed to bind")
> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
> ---
>
> Changes in v2:
> - Take the registered check out of the msm_shutdown_hw() and make callers to check instead.
> - Make msm_shutdown_hw() an inline function.
> - Add a Fixes: tag.
>
>  drivers/gpu/drm/msm/msm_drv.c | 29 +++++++++++++++++------------
>  1 file changed, 17 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
> index 1ed4cd09dbf8..6deecb13a31c 100644
> --- a/drivers/gpu/drm/msm/msm_drv.c
> +++ b/drivers/gpu/drm/msm/msm_drv.c
> @@ -190,6 +190,20 @@ static int vblank_ctrl_queue_work(struct msm_drm_private *priv,
>         return 0;
>  }
>
> +/*
> + * Shutdown the hw if we're far enough along where things might be on.
> + * If we run this too early, we'll end up panicking in any variety of
> + * places. Since we don't register the drm device until late in
> + * msm_drm_init, drm_dev->registered is used as an indicator that the
> + * shutdown will be successful.
> + *
> + * This function must only be called if drm_dev->registered is true.
> + */
> +static inline void msm_shutdown_hw(struct drm_device *dev)
> +{
> +       drm_atomic_helper_shutdown(dev);
> +}

Now there is no point in having this as a separate function. Could you
please inline it?

> +
>  static int msm_drm_uninit(struct device *dev)
>  {
>         struct platform_device *pdev = to_platform_device(dev);
> @@ -198,16 +212,9 @@ static int msm_drm_uninit(struct device *dev)
>         struct msm_kms *kms = priv->kms;
>         int i;
>
> -       /*
> -        * Shutdown the hw if we're far enough along where things might be on.
> -        * If we run this too early, we'll end up panicking in any variety of
> -        * places. Since we don't register the drm device until late in
> -        * msm_drm_init, drm_dev->registered is used as an indicator that the
> -        * shutdown will be successful.
> -        */
>         if (ddev->registered) {
>                 drm_dev_unregister(ddev);
> -               drm_atomic_helper_shutdown(ddev);
> +               msm_shutdown_hw(ddev);
>         }
>
>         /* We must cancel and cleanup any pending vblank enable/disable
> @@ -1242,10 +1249,8 @@ void msm_drv_shutdown(struct platform_device *pdev)
>         struct msm_drm_private *priv = platform_get_drvdata(pdev);
>         struct drm_device *drm = priv ? priv->dev : NULL;
>
> -       if (!priv || !priv->kms)
> -               return;
> -
> -       drm_atomic_helper_shutdown(drm);

It might be worth repeating the comment here.

> +       if (drm && drm->registered)
> +               msm_shutdown_hw(drm);
>  }
>
>  static struct platform_driver msm_platform_driver = {
Javier Martinez Canillas July 24, 2022, 6:47 p.m. UTC | #2
Hello Dmitry,

Thanks for your feedback.

On 7/24/22 20:36, Dmitry Baryshkov wrote:
> On Sun, 24 Jul 2022 at 14:13, Javier Martinez Canillas
> <javierm@redhat.com> wrote:

[...]

>>
>> +/*
>> + * Shutdown the hw if we're far enough along where things might be on.
>> + * If we run this too early, we'll end up panicking in any variety of
>> + * places. Since we don't register the drm device until late in
>> + * msm_drm_init, drm_dev->registered is used as an indicator that the
>> + * shutdown will be successful.
>> + *
>> + * This function must only be called if drm_dev->registered is true.
>> + */
>> +static inline void msm_shutdown_hw(struct drm_device *dev)
>> +{
>> +       drm_atomic_helper_shutdown(dev);
>> +}
> 
> Now there is no point in having this as a separate function. Could you

The only reason why I kept this was to avoid duplicating the same comment
in two places. I thought that an inline function would be better than that.

> please inline it?
>

That's already the case. Sorry but I have to ask, do you read my patches
before commenting? I have the feeling that is the second time that you ask
for something that was already done in the patch.
 
[...]

>>
>> -       if (!priv || !priv->kms)
>> -               return;
>> -
>> -       drm_atomic_helper_shutdown(drm);
> 
> It might be worth repeating the comment here.
>

As mentioned I thought about it. But then decided that an inline function would
be better to have the comment just in one place. I don't have a strong opinion
though so I could change if others agree that duplicating the comment is better.
Javier Martinez Canillas July 24, 2022, 7:50 p.m. UTC | #3
On 7/24/22 20:47, Javier Martinez Canillas wrote:
> Hello Dmitry,

[...]

>> Now there is no point in having this as a separate function. Could you
> 
> The only reason why I kept this was to avoid duplicating the same comment
> in two places. I thought that an inline function would be better than that.
> 
>> please inline it?
>>

Or do you mean inline it as dropping the wrapper helper and just call to
drm_atomic_helper_shutdown() in both callbacks ? I'm OK with that but as
mentioned then we should probably have to duplicate the comment.

Since is marked as inline anyways, the resulting code should be the same.
Dmitry Baryshkov July 24, 2022, 8:10 p.m. UTC | #4
On Sun, 24 Jul 2022 at 22:51, Javier Martinez Canillas
<javierm@redhat.com> wrote:
>
> On 7/24/22 20:47, Javier Martinez Canillas wrote:
> > Hello Dmitry,
>
> [...]
>
> >> Now there is no point in having this as a separate function. Could you
> >
> > The only reason why I kept this was to avoid duplicating the same comment
> > in two places. I thought that an inline function would be better than that.
> >
> >> please inline it?
> >>
>
> Or do you mean inline it as dropping the wrapper helper and just call to
> drm_atomic_helper_shutdown() in both callbacks ? I'm OK with that but as
> mentioned then we should probably have to duplicate the comment.
>
> Since is marked as inline anyways, the resulting code should be the same.

Yes, I'd like for you to drop the wrapper. I'm fine with duplicating
the comment, since it will be in place where it matters (before
checking ddev->registered) rather than just stating the contract for
the wrapper (which can be easily ignored).

(And yes, I do read patches and commit messages before commenting.)
Javier Martinez Canillas July 24, 2022, 8:15 p.m. UTC | #5
On 7/24/22 22:10, Dmitry Baryshkov wrote:
> On Sun, 24 Jul 2022 at 22:51, Javier Martinez Canillas
> <javierm@redhat.com> wrote:
>>
>> On 7/24/22 20:47, Javier Martinez Canillas wrote:
>>> Hello Dmitry,
>>
>> [...]
>>
>>>> Now there is no point in having this as a separate function. Could you
>>>
>>> The only reason why I kept this was to avoid duplicating the same comment
>>> in two places. I thought that an inline function would be better than that.
>>>
>>>> please inline it?
>>>>
>>
>> Or do you mean inline it as dropping the wrapper helper and just call to
>> drm_atomic_helper_shutdown() in both callbacks ? I'm OK with that but as
>> mentioned then we should probably have to duplicate the comment.
>>
>> Since is marked as inline anyways, the resulting code should be the same.
> 
> Yes, I'd like for you to drop the wrapper. I'm fine with duplicating
> the comment, since it will be in place where it matters (before
> checking ddev->registered) rather than just stating the contract for
> the wrapper (which can be easily ignored).
> 
> (And yes, I do read patches and commit messages before commenting.)
> 

OK. I'll post a v3 tomorrow doing that then. Sorry for the misunderstanding.
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index 1ed4cd09dbf8..6deecb13a31c 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -190,6 +190,20 @@  static int vblank_ctrl_queue_work(struct msm_drm_private *priv,
 	return 0;
 }
 
+/*
+ * Shutdown the hw if we're far enough along where things might be on.
+ * If we run this too early, we'll end up panicking in any variety of
+ * places. Since we don't register the drm device until late in
+ * msm_drm_init, drm_dev->registered is used as an indicator that the
+ * shutdown will be successful.
+ *
+ * This function must only be called if drm_dev->registered is true.
+ */
+static inline void msm_shutdown_hw(struct drm_device *dev)
+{
+	drm_atomic_helper_shutdown(dev);
+}
+
 static int msm_drm_uninit(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -198,16 +212,9 @@  static int msm_drm_uninit(struct device *dev)
 	struct msm_kms *kms = priv->kms;
 	int i;
 
-	/*
-	 * Shutdown the hw if we're far enough along where things might be on.
-	 * If we run this too early, we'll end up panicking in any variety of
-	 * places. Since we don't register the drm device until late in
-	 * msm_drm_init, drm_dev->registered is used as an indicator that the
-	 * shutdown will be successful.
-	 */
 	if (ddev->registered) {
 		drm_dev_unregister(ddev);
-		drm_atomic_helper_shutdown(ddev);
+		msm_shutdown_hw(ddev);
 	}
 
 	/* We must cancel and cleanup any pending vblank enable/disable
@@ -1242,10 +1249,8 @@  void msm_drv_shutdown(struct platform_device *pdev)
 	struct msm_drm_private *priv = platform_get_drvdata(pdev);
 	struct drm_device *drm = priv ? priv->dev : NULL;
 
-	if (!priv || !priv->kms)
-		return;
-
-	drm_atomic_helper_shutdown(drm);
+	if (drm && drm->registered)
+		msm_shutdown_hw(drm);
 }
 
 static struct platform_driver msm_platform_driver = {