Message ID | 20220725174810.1.If1f94fbbdb7c1d0fb3961de61483a851ad1971a7@changeid (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | drm/msm/dsi: Don't set a load before disabling a regulator | expand |
On 7/25/2022 5:49 PM, Douglas Anderson wrote: > As of commit 5451781dadf8 ("regulator: core: Only count load for > enabled consumers"), a load isn't counted for a disabled > regulator. That means all the code in the DSI driver to specify and > set loads before disabling a regulator is not actually doing anything > useful. Let's remove it. > > It should be noted that all of the loads set that were being specified > were pointless noise anyway. The only use for this number is to pick > between low power and high power modes of regulators. Regulators > appear to do this changeover at loads on the order of 10000 uA. You > would a lot of clients of the same rail for that 100 uA number to I guess you meant "you would need a lot of clients" > count for anything. > > Note that now that we get rid of the setting of the load at disable > time, we can just set the load once when we first get the regulator > and then forget it. > > It should also be noted that the regulator functions > regulator_bulk_enable() and regulator_set_load() already print error > messages when they encounter problems so while moving things around we > get rid of some extra error prints. > > Signed-off-by: Douglas Anderson <dianders@chromium.org> > --- > > drivers/gpu/drm/msm/dsi/dsi.h | 1 - > drivers/gpu/drm/msm/dsi/dsi_cfg.c | 52 +++++++++---------- > drivers/gpu/drm/msm/dsi/dsi_host.c | 45 ++++------------ > drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 46 ++++------------ > drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 4 +- > drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 6 +-- > drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c | 4 +- > drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 6 +-- > .../gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 2 +- > drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 6 +-- > 10 files changed, 60 insertions(+), 112 deletions(-) > > diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h > index 580a1e6358bf..bb6a5bd05cb1 100644 > --- a/drivers/gpu/drm/msm/dsi/dsi.h > +++ b/drivers/gpu/drm/msm/dsi/dsi.h > @@ -37,7 +37,6 @@ enum msm_dsi_phy_usecase { > struct dsi_reg_entry { > char name[32]; > int enable_load; > - int disable_load; > }; > > struct dsi_reg_config { > diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c > index 2c23324a2296..d24742ea32c6 100644 > --- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c > +++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c > @@ -14,9 +14,9 @@ static const struct msm_dsi_config apq8064_dsi_cfg = { > .reg_cfg = { > .num = 3, > .regs = { > - {"vdda", 100000, 100}, /* 1.2 V */ > - {"avdd", 10000, 100}, /* 3.0 V */ > - {"vddio", 100000, 100}, /* 1.8 V */ > + {"vdda", 100000}, /* 1.2 V */ > + {"avdd", 10000}, /* 3.0 V */ > + {"vddio", 100000}, /* 1.8 V */ > }, > }, > .bus_clk_names = dsi_v2_bus_clk_names, > @@ -34,9 +34,9 @@ static const struct msm_dsi_config msm8974_apq8084_dsi_cfg = { > .reg_cfg = { > .num = 3, > .regs = { > - {"vdd", 150000, 100}, /* 3.0 V */ > - {"vdda", 100000, 100}, /* 1.2 V */ > - {"vddio", 100000, 100}, /* 1.8 V */ > + {"vdd", 150000}, /* 3.0 V */ > + {"vdda", 100000}, /* 1.2 V */ > + {"vddio", 100000}, /* 1.8 V */ > }, > }, > .bus_clk_names = dsi_6g_bus_clk_names, > @@ -54,8 +54,8 @@ static const struct msm_dsi_config msm8916_dsi_cfg = { > .reg_cfg = { > .num = 2, > .regs = { > - {"vdda", 100000, 100}, /* 1.2 V */ > - {"vddio", 100000, 100}, /* 1.8 V */ > + {"vdda", 100000}, /* 1.2 V */ > + {"vddio", 100000}, /* 1.8 V */ > }, > }, > .bus_clk_names = dsi_8916_bus_clk_names, > @@ -73,8 +73,8 @@ static const struct msm_dsi_config msm8976_dsi_cfg = { > .reg_cfg = { > .num = 2, > .regs = { > - {"vdda", 100000, 100}, /* 1.2 V */ > - {"vddio", 100000, 100}, /* 1.8 V */ > + {"vdda", 100000}, /* 1.2 V */ > + {"vddio", 100000}, /* 1.8 V */ > }, > }, > .bus_clk_names = dsi_8976_bus_clk_names, > @@ -88,12 +88,12 @@ static const struct msm_dsi_config msm8994_dsi_cfg = { > .reg_cfg = { > .num = 6, > .regs = { > - {"vdda", 100000, 100}, /* 1.25 V */ > - {"vddio", 100000, 100}, /* 1.8 V */ > - {"vcca", 10000, 100}, /* 1.0 V */ > - {"vdd", 100000, 100}, /* 1.8 V */ > - {"lab_reg", -1, -1}, > - {"ibb_reg", -1, -1}, > + {"vdda", 100000}, /* 1.25 V */ > + {"vddio", 100000}, /* 1.8 V */ > + {"vcca", 10000}, /* 1.0 V */ > + {"vdd", 100000}, /* 1.8 V */ > + {"lab_reg", -1}, > + {"ibb_reg", -1}, > }, > }, > .bus_clk_names = dsi_6g_bus_clk_names, > @@ -111,9 +111,9 @@ static const struct msm_dsi_config msm8996_dsi_cfg = { > .reg_cfg = { > .num = 2, > .regs = { > - {"vdda", 18160, 1 }, /* 1.25 V */ > - {"vcca", 17000, 32 }, /* 0.925 V */ > - {"vddio", 100000, 100 },/* 1.8 V */ > + {"vdda", 18160}, /* 1.25 V */ > + {"vcca", 17000}, /* 0.925 V */ > + {"vddio", 100000},/* 1.8 V */ > }, > }, > .bus_clk_names = dsi_8996_bus_clk_names, > @@ -131,8 +131,8 @@ static const struct msm_dsi_config msm8998_dsi_cfg = { > .reg_cfg = { > .num = 2, > .regs = { > - {"vdd", 367000, 16 }, /* 0.9 V */ > - {"vdda", 62800, 2 }, /* 1.2 V */ > + {"vdd", 367000}, /* 0.9 V */ > + {"vdda", 62800}, /* 1.2 V */ > }, > }, > .bus_clk_names = dsi_msm8998_bus_clk_names, > @@ -150,7 +150,7 @@ static const struct msm_dsi_config sdm660_dsi_cfg = { > .reg_cfg = { > .num = 2, > .regs = { > - {"vdda", 12560, 4 }, /* 1.2 V */ > + {"vdda", 12560}, /* 1.2 V */ > }, > }, > .bus_clk_names = dsi_sdm660_bus_clk_names, > @@ -172,7 +172,7 @@ static const struct msm_dsi_config sdm845_dsi_cfg = { > .reg_cfg = { > .num = 1, > .regs = { > - {"vdda", 21800, 4 }, /* 1.2 V */ > + {"vdda", 21800}, /* 1.2 V */ > }, > }, > .bus_clk_names = dsi_sdm845_bus_clk_names, > @@ -186,7 +186,7 @@ static const struct msm_dsi_config sc7180_dsi_cfg = { > .reg_cfg = { > .num = 1, > .regs = { > - {"vdda", 21800, 4 }, /* 1.2 V */ > + {"vdda", 21800}, /* 1.2 V */ > }, > }, > .bus_clk_names = dsi_sc7180_bus_clk_names, > @@ -204,7 +204,7 @@ static const struct msm_dsi_config sc7280_dsi_cfg = { > .reg_cfg = { > .num = 1, > .regs = { > - {"vdda", 8350, 0 }, /* 1.2 V */ > + {"vdda", 8350}, /* 1.2 V */ > }, > }, > .bus_clk_names = dsi_sc7280_bus_clk_names, > @@ -222,7 +222,7 @@ static const struct msm_dsi_config qcm2290_dsi_cfg = { > .reg_cfg = { > .num = 1, > .regs = { > - {"vdda", 21800, 4 }, /* 1.2 V */ > + {"vdda", 21800}, /* 1.2 V */ > }, > }, > .bus_clk_names = dsi_qcm2290_bus_clk_names, > diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c > index bab2634ebd11..c59e88d766de 100644 > --- a/drivers/gpu/drm/msm/dsi/dsi_host.c > +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c > @@ -259,15 +259,7 @@ static inline struct msm_dsi_host *to_msm_dsi_host(struct mipi_dsi_host *host) > static void dsi_host_regulator_disable(struct msm_dsi_host *msm_host) > { It seems like now we can drop this function dsi_host_regulator_disable() entirely and just call regulator_bulk_disable() ? > struct regulator_bulk_data *s = msm_host->supplies; > - const struct dsi_reg_entry *regs = msm_host->cfg_hnd->cfg->reg_cfg.regs; > int num = msm_host->cfg_hnd->cfg->reg_cfg.num; > - int i; > - > - DBG(""); > - for (i = num - 1; i >= 0; i--) > - if (regs[i].disable_load >= 0) > - regulator_set_load(s[i].consumer, > - regs[i].disable_load); > > regulator_bulk_disable(num, s); > } > @@ -275,35 +267,9 @@ static void dsi_host_regulator_disable(struct msm_dsi_host *msm_host) > static int dsi_host_regulator_enable(struct msm_dsi_host *msm_host) > { > struct regulator_bulk_data *s = msm_host->supplies; > - const struct dsi_reg_entry *regs = msm_host->cfg_hnd->cfg->reg_cfg.regs; > int num = msm_host->cfg_hnd->cfg->reg_cfg.num; > - int ret, i; > - > - DBG(""); > - for (i = 0; i < num; i++) { > - if (regs[i].enable_load >= 0) { > - ret = regulator_set_load(s[i].consumer, > - regs[i].enable_load); > - if (ret < 0) { > - pr_err("regulator %d set op mode failed, %d\n", > - i, ret); > - goto fail; > - } > - } > - } > - > - ret = regulator_bulk_enable(num, s); > - if (ret < 0) { > - pr_err("regulator enable failed, %d\n", ret); > - goto fail; > - } > > - return 0; > - > -fail: > - for (i--; i >= 0; i--) > - regulator_set_load(s[i].consumer, regs[i].disable_load); > - return ret; > + return regulator_bulk_enable(num, s); same here? We can just remove dsi_host_regulator_enable and just call regulator_bulk_enable() now? > } > > static int dsi_regulator_init(struct msm_dsi_host *msm_host) > @@ -323,6 +289,15 @@ static int dsi_regulator_init(struct msm_dsi_host *msm_host) > return ret; > } > > + for (i = 0; i < num; i++) { > + if (regs[i].enable_load >= 0) { > + ret = regulator_set_load(s[i].consumer, > + regs[i].enable_load); > + if (ret < 0) > + return ret; > + } > + } > + > return 0; > } > > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c > index a39de3bdc7fa..330c0c4e7f9d 100644 > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c > @@ -529,20 +529,22 @@ static int dsi_phy_regulator_init(struct msm_dsi_phy *phy) > return ret; > } > > + for (i = 0; i < num; i++) { > + if (regs[i].enable_load >= 0) { > + ret = regulator_set_load(s[i].consumer, > + regs[i].enable_load); > + if (ret < 0) > + return ret; > + } > + } > + > return 0; > } > > static void dsi_phy_regulator_disable(struct msm_dsi_phy *phy) > { > struct regulator_bulk_data *s = phy->supplies; > - const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs; > int num = phy->cfg->reg_cfg.num; > - int i; > - > - DBG(""); > - for (i = num - 1; i >= 0; i--) > - if (regs[i].disable_load >= 0) > - regulator_set_load(s[i].consumer, regs[i].disable_load); > > regulator_bulk_disable(num, s); > } > @@ -550,37 +552,9 @@ static void dsi_phy_regulator_disable(struct msm_dsi_phy *phy) > static int dsi_phy_regulator_enable(struct msm_dsi_phy *phy) > { > struct regulator_bulk_data *s = phy->supplies; > - const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs; > - struct device *dev = &phy->pdev->dev; > int num = phy->cfg->reg_cfg.num; > - int ret, i; > > - DBG(""); > - for (i = 0; i < num; i++) { > - if (regs[i].enable_load >= 0) { > - ret = regulator_set_load(s[i].consumer, > - regs[i].enable_load); > - if (ret < 0) { > - DRM_DEV_ERROR(dev, > - "regulator %d set op mode failed, %d\n", > - i, ret); > - goto fail; > - } > - } > - } > - > - ret = regulator_bulk_enable(num, s); > - if (ret < 0) { > - DRM_DEV_ERROR(dev, "regulator enable failed, %d\n", ret); > - goto fail; > - } > - > - return 0; > - > -fail: > - for (i--; i >= 0; i--) > - regulator_set_load(s[i].consumer, regs[i].disable_load); > - return ret; > + return regulator_bulk_enable(num, s); > } > > static int dsi_phy_enable_resource(struct msm_dsi_phy *phy) > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c > index 08b015ea1b1e..6a10a1448051 100644 > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c > @@ -1033,7 +1033,7 @@ const struct msm_dsi_phy_cfg dsi_phy_10nm_cfgs = { > .reg_cfg = { > .num = 1, > .regs = { > - {"vdds", 36000, 32}, > + {"vdds", 36000}, > }, > }, > .ops = { > @@ -1055,7 +1055,7 @@ const struct msm_dsi_phy_cfg dsi_phy_10nm_8998_cfgs = { > .reg_cfg = { > .num = 1, > .regs = { > - {"vdds", 36000, 32}, > + {"vdds", 36000}, > }, > }, > .ops = { > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c > index 8199c53567f4..0f3d4c56c333 100644 > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c > @@ -1029,7 +1029,7 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs = { > .reg_cfg = { > .num = 1, > .regs = { > - {"vcca", 17000, 32}, > + {"vcca", 17000}, > }, > }, > .ops = { > @@ -1050,7 +1050,7 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_660_cfgs = { > .reg_cfg = { > .num = 1, > .regs = { > - {"vcca", 73400, 32}, > + {"vcca", 73400}, > }, > }, > .ops = { > @@ -1071,7 +1071,7 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_8953_cfgs = { > .reg_cfg = { > .num = 1, > .regs = { > - {"vcca", 17000, 32}, > + {"vcca", 17000}, > }, > }, > .ops = { > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c > index ee7c418a1c29..b7c621d94981 100644 > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c > @@ -134,8 +134,8 @@ const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs = { > .reg_cfg = { > .num = 2, > .regs = { > - {"vddio", 100000, 100}, /* 1.8 V */ > - {"vcca", 10000, 100}, /* 1.0 V */ > + {"vddio", 100000}, /* 1.8 V */ > + {"vcca", 10000}, /* 1.0 V */ > }, > }, > .ops = { > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c > index 48eab80b548e..6beba387640d 100644 > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c > @@ -774,7 +774,7 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs = { > .reg_cfg = { > .num = 1, > .regs = { > - {"vddio", 100000, 100}, > + {"vddio", 100000}, > }, > }, > .ops = { > @@ -795,7 +795,7 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_famb_cfgs = { > .reg_cfg = { > .num = 1, > .regs = { > - {"vddio", 100000, 100}, > + {"vddio", 100000}, > }, > }, > .ops = { > @@ -816,7 +816,7 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs = { > .reg_cfg = { > .num = 1, > .regs = { > - {"vddio", 100000, 100}, /* 1.8 V */ > + {"vddio", 100000}, /* 1.8 V */ > }, > }, > .ops = { > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c > index fc56cdcc9ad6..2e942b10fffa 100644 > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c > @@ -653,7 +653,7 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs = { > .reg_cfg = { > .num = 1, > .regs = { > - {"vddio", 100000, 100}, /* 1.8 V */ > + {"vddio", 100000}, /* 1.8 V */ > }, > }, > .ops = { > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c > index 66ed1919a1db..9c7c49ce1200 100644 > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c > @@ -1041,7 +1041,7 @@ const struct msm_dsi_phy_cfg dsi_phy_7nm_cfgs = { > .reg_cfg = { > .num = 1, > .regs = { > - {"vdds", 36000, 32}, > + {"vdds", 36000}, > }, > }, > .ops = { > @@ -1068,7 +1068,7 @@ const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs = { > .reg_cfg = { > .num = 1, > .regs = { > - {"vdds", 36000, 32}, > + {"vdds", 36000}, > }, > }, > .ops = { > @@ -1090,7 +1090,7 @@ const struct msm_dsi_phy_cfg dsi_phy_7nm_7280_cfgs = { > .reg_cfg = { > .num = 1, > .regs = { > - {"vdds", 37550, 0}, > + {"vdds", 37550}, > }, > }, > .ops = {
Hi, On Tue, Jul 26, 2022 at 4:53 PM Abhinav Kumar <quic_abhinavk@quicinc.com> wrote: > > On 7/25/2022 5:49 PM, Douglas Anderson wrote: > > As of commit 5451781dadf8 ("regulator: core: Only count load for > > enabled consumers"), a load isn't counted for a disabled > > regulator. That means all the code in the DSI driver to specify and > > set loads before disabling a regulator is not actually doing anything > > useful. Let's remove it. > > > > It should be noted that all of the loads set that were being specified > > were pointless noise anyway. The only use for this number is to pick > > between low power and high power modes of regulators. Regulators > > appear to do this changeover at loads on the order of 10000 uA. You > > would a lot of clients of the same rail for that 100 uA number to > > I guess you meant "you would need a lot of clients" Yeah, sorry. :( I'll fix it up if I need a v3. > > @@ -259,15 +259,7 @@ static inline struct msm_dsi_host *to_msm_dsi_host(struct mipi_dsi_host *host) > > static void dsi_host_regulator_disable(struct msm_dsi_host *msm_host) > > { > It seems like now we can drop this function dsi_host_regulator_disable() > entirely and just call regulator_bulk_disable() ? Sure, if you want. One could still argue that it provides a tiny bit of abstraction and avoids the caller from having to know where to find the number of regulators and all that, but I can go either way. Is this worth a v3, do you think? If so, I might tack it on at the end of the series. Note that I say "v3" because I actually included this patch in a larger series and called that series "v2" [1]. [1] https://lore.kernel.org/r/20220726173824.1166873-1-dianders@chromium.org
On Wed, 27 Jul 2022 at 16:57, Doug Anderson <dianders@chromium.org> wrote: > > Hi, > > On Tue, Jul 26, 2022 at 4:53 PM Abhinav Kumar <quic_abhinavk@quicinc.com> wrote: > > > > On 7/25/2022 5:49 PM, Douglas Anderson wrote: > > > As of commit 5451781dadf8 ("regulator: core: Only count load for > > > enabled consumers"), a load isn't counted for a disabled > > > regulator. That means all the code in the DSI driver to specify and > > > set loads before disabling a regulator is not actually doing anything > > > useful. Let's remove it. > > > > > > It should be noted that all of the loads set that were being specified > > > were pointless noise anyway. The only use for this number is to pick > > > between low power and high power modes of regulators. Regulators > > > appear to do this changeover at loads on the order of 10000 uA. You > > > would a lot of clients of the same rail for that 100 uA number to > > > > I guess you meant "you would need a lot of clients" > > Yeah, sorry. :( I'll fix it up if I need a v3. > > > > > @@ -259,15 +259,7 @@ static inline struct msm_dsi_host *to_msm_dsi_host(struct mipi_dsi_host *host) > > > static void dsi_host_regulator_disable(struct msm_dsi_host *msm_host) > > > { > > It seems like now we can drop this function dsi_host_regulator_disable() > > entirely and just call regulator_bulk_disable() ? > > Sure, if you want. One could still argue that it provides a tiny bit > of abstraction and avoids the caller from having to know where to find > the number of regulators and all that, but I can go either way. Is > this worth a v3, do you think? If so, I might tack it on at the end of > the series. I'd say, drop it. Having extra single-call wrappers doesn't seem to add a lot. > > Note that I say "v3" because I actually included this patch in a > larger series and called that series "v2" [1]. > > > [1] https://lore.kernel.org/r/20220726173824.1166873-1-dianders@chromium.org
Hi, On Wed, Jul 27, 2022 at 6:59 AM Dmitry Baryshkov <dmitry.baryshkov@linaro.org> wrote: > > On Wed, 27 Jul 2022 at 16:57, Doug Anderson <dianders@chromium.org> wrote: > > > > Hi, > > > > On Tue, Jul 26, 2022 at 4:53 PM Abhinav Kumar <quic_abhinavk@quicinc.com> wrote: > > > > > > On 7/25/2022 5:49 PM, Douglas Anderson wrote: > > > > As of commit 5451781dadf8 ("regulator: core: Only count load for > > > > enabled consumers"), a load isn't counted for a disabled > > > > regulator. That means all the code in the DSI driver to specify and > > > > set loads before disabling a regulator is not actually doing anything > > > > useful. Let's remove it. > > > > > > > > It should be noted that all of the loads set that were being specified > > > > were pointless noise anyway. The only use for this number is to pick > > > > between low power and high power modes of regulators. Regulators > > > > appear to do this changeover at loads on the order of 10000 uA. You > > > > would a lot of clients of the same rail for that 100 uA number to > > > > > > I guess you meant "you would need a lot of clients" > > > > Yeah, sorry. :( I'll fix it up if I need a v3. > > > > > > > > @@ -259,15 +259,7 @@ static inline struct msm_dsi_host *to_msm_dsi_host(struct mipi_dsi_host *host) > > > > static void dsi_host_regulator_disable(struct msm_dsi_host *msm_host) > > > > { > > > It seems like now we can drop this function dsi_host_regulator_disable() > > > entirely and just call regulator_bulk_disable() ? > > > > Sure, if you want. One could still argue that it provides a tiny bit > > of abstraction and avoids the caller from having to know where to find > > the number of regulators and all that, but I can go either way. Is > > this worth a v3, do you think? If so, I might tack it on at the end of > > the series. > > I'd say, drop it. Having extra single-call wrappers doesn't seem to add a lot. Sounds good. I'll wait a little bit of time for feedback on the larger series and then send a v3, probably next week. -Doug
diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h index 580a1e6358bf..bb6a5bd05cb1 100644 --- a/drivers/gpu/drm/msm/dsi/dsi.h +++ b/drivers/gpu/drm/msm/dsi/dsi.h @@ -37,7 +37,6 @@ enum msm_dsi_phy_usecase { struct dsi_reg_entry { char name[32]; int enable_load; - int disable_load; }; struct dsi_reg_config { diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c index 2c23324a2296..d24742ea32c6 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c +++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c @@ -14,9 +14,9 @@ static const struct msm_dsi_config apq8064_dsi_cfg = { .reg_cfg = { .num = 3, .regs = { - {"vdda", 100000, 100}, /* 1.2 V */ - {"avdd", 10000, 100}, /* 3.0 V */ - {"vddio", 100000, 100}, /* 1.8 V */ + {"vdda", 100000}, /* 1.2 V */ + {"avdd", 10000}, /* 3.0 V */ + {"vddio", 100000}, /* 1.8 V */ }, }, .bus_clk_names = dsi_v2_bus_clk_names, @@ -34,9 +34,9 @@ static const struct msm_dsi_config msm8974_apq8084_dsi_cfg = { .reg_cfg = { .num = 3, .regs = { - {"vdd", 150000, 100}, /* 3.0 V */ - {"vdda", 100000, 100}, /* 1.2 V */ - {"vddio", 100000, 100}, /* 1.8 V */ + {"vdd", 150000}, /* 3.0 V */ + {"vdda", 100000}, /* 1.2 V */ + {"vddio", 100000}, /* 1.8 V */ }, }, .bus_clk_names = dsi_6g_bus_clk_names, @@ -54,8 +54,8 @@ static const struct msm_dsi_config msm8916_dsi_cfg = { .reg_cfg = { .num = 2, .regs = { - {"vdda", 100000, 100}, /* 1.2 V */ - {"vddio", 100000, 100}, /* 1.8 V */ + {"vdda", 100000}, /* 1.2 V */ + {"vddio", 100000}, /* 1.8 V */ }, }, .bus_clk_names = dsi_8916_bus_clk_names, @@ -73,8 +73,8 @@ static const struct msm_dsi_config msm8976_dsi_cfg = { .reg_cfg = { .num = 2, .regs = { - {"vdda", 100000, 100}, /* 1.2 V */ - {"vddio", 100000, 100}, /* 1.8 V */ + {"vdda", 100000}, /* 1.2 V */ + {"vddio", 100000}, /* 1.8 V */ }, }, .bus_clk_names = dsi_8976_bus_clk_names, @@ -88,12 +88,12 @@ static const struct msm_dsi_config msm8994_dsi_cfg = { .reg_cfg = { .num = 6, .regs = { - {"vdda", 100000, 100}, /* 1.25 V */ - {"vddio", 100000, 100}, /* 1.8 V */ - {"vcca", 10000, 100}, /* 1.0 V */ - {"vdd", 100000, 100}, /* 1.8 V */ - {"lab_reg", -1, -1}, - {"ibb_reg", -1, -1}, + {"vdda", 100000}, /* 1.25 V */ + {"vddio", 100000}, /* 1.8 V */ + {"vcca", 10000}, /* 1.0 V */ + {"vdd", 100000}, /* 1.8 V */ + {"lab_reg", -1}, + {"ibb_reg", -1}, }, }, .bus_clk_names = dsi_6g_bus_clk_names, @@ -111,9 +111,9 @@ static const struct msm_dsi_config msm8996_dsi_cfg = { .reg_cfg = { .num = 2, .regs = { - {"vdda", 18160, 1 }, /* 1.25 V */ - {"vcca", 17000, 32 }, /* 0.925 V */ - {"vddio", 100000, 100 },/* 1.8 V */ + {"vdda", 18160}, /* 1.25 V */ + {"vcca", 17000}, /* 0.925 V */ + {"vddio", 100000},/* 1.8 V */ }, }, .bus_clk_names = dsi_8996_bus_clk_names, @@ -131,8 +131,8 @@ static const struct msm_dsi_config msm8998_dsi_cfg = { .reg_cfg = { .num = 2, .regs = { - {"vdd", 367000, 16 }, /* 0.9 V */ - {"vdda", 62800, 2 }, /* 1.2 V */ + {"vdd", 367000}, /* 0.9 V */ + {"vdda", 62800}, /* 1.2 V */ }, }, .bus_clk_names = dsi_msm8998_bus_clk_names, @@ -150,7 +150,7 @@ static const struct msm_dsi_config sdm660_dsi_cfg = { .reg_cfg = { .num = 2, .regs = { - {"vdda", 12560, 4 }, /* 1.2 V */ + {"vdda", 12560}, /* 1.2 V */ }, }, .bus_clk_names = dsi_sdm660_bus_clk_names, @@ -172,7 +172,7 @@ static const struct msm_dsi_config sdm845_dsi_cfg = { .reg_cfg = { .num = 1, .regs = { - {"vdda", 21800, 4 }, /* 1.2 V */ + {"vdda", 21800}, /* 1.2 V */ }, }, .bus_clk_names = dsi_sdm845_bus_clk_names, @@ -186,7 +186,7 @@ static const struct msm_dsi_config sc7180_dsi_cfg = { .reg_cfg = { .num = 1, .regs = { - {"vdda", 21800, 4 }, /* 1.2 V */ + {"vdda", 21800}, /* 1.2 V */ }, }, .bus_clk_names = dsi_sc7180_bus_clk_names, @@ -204,7 +204,7 @@ static const struct msm_dsi_config sc7280_dsi_cfg = { .reg_cfg = { .num = 1, .regs = { - {"vdda", 8350, 0 }, /* 1.2 V */ + {"vdda", 8350}, /* 1.2 V */ }, }, .bus_clk_names = dsi_sc7280_bus_clk_names, @@ -222,7 +222,7 @@ static const struct msm_dsi_config qcm2290_dsi_cfg = { .reg_cfg = { .num = 1, .regs = { - {"vdda", 21800, 4 }, /* 1.2 V */ + {"vdda", 21800}, /* 1.2 V */ }, }, .bus_clk_names = dsi_qcm2290_bus_clk_names, diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index bab2634ebd11..c59e88d766de 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -259,15 +259,7 @@ static inline struct msm_dsi_host *to_msm_dsi_host(struct mipi_dsi_host *host) static void dsi_host_regulator_disable(struct msm_dsi_host *msm_host) { struct regulator_bulk_data *s = msm_host->supplies; - const struct dsi_reg_entry *regs = msm_host->cfg_hnd->cfg->reg_cfg.regs; int num = msm_host->cfg_hnd->cfg->reg_cfg.num; - int i; - - DBG(""); - for (i = num - 1; i >= 0; i--) - if (regs[i].disable_load >= 0) - regulator_set_load(s[i].consumer, - regs[i].disable_load); regulator_bulk_disable(num, s); } @@ -275,35 +267,9 @@ static void dsi_host_regulator_disable(struct msm_dsi_host *msm_host) static int dsi_host_regulator_enable(struct msm_dsi_host *msm_host) { struct regulator_bulk_data *s = msm_host->supplies; - const struct dsi_reg_entry *regs = msm_host->cfg_hnd->cfg->reg_cfg.regs; int num = msm_host->cfg_hnd->cfg->reg_cfg.num; - int ret, i; - - DBG(""); - for (i = 0; i < num; i++) { - if (regs[i].enable_load >= 0) { - ret = regulator_set_load(s[i].consumer, - regs[i].enable_load); - if (ret < 0) { - pr_err("regulator %d set op mode failed, %d\n", - i, ret); - goto fail; - } - } - } - - ret = regulator_bulk_enable(num, s); - if (ret < 0) { - pr_err("regulator enable failed, %d\n", ret); - goto fail; - } - return 0; - -fail: - for (i--; i >= 0; i--) - regulator_set_load(s[i].consumer, regs[i].disable_load); - return ret; + return regulator_bulk_enable(num, s); } static int dsi_regulator_init(struct msm_dsi_host *msm_host) @@ -323,6 +289,15 @@ static int dsi_regulator_init(struct msm_dsi_host *msm_host) return ret; } + for (i = 0; i < num; i++) { + if (regs[i].enable_load >= 0) { + ret = regulator_set_load(s[i].consumer, + regs[i].enable_load); + if (ret < 0) + return ret; + } + } + return 0; } diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c index a39de3bdc7fa..330c0c4e7f9d 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c @@ -529,20 +529,22 @@ static int dsi_phy_regulator_init(struct msm_dsi_phy *phy) return ret; } + for (i = 0; i < num; i++) { + if (regs[i].enable_load >= 0) { + ret = regulator_set_load(s[i].consumer, + regs[i].enable_load); + if (ret < 0) + return ret; + } + } + return 0; } static void dsi_phy_regulator_disable(struct msm_dsi_phy *phy) { struct regulator_bulk_data *s = phy->supplies; - const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs; int num = phy->cfg->reg_cfg.num; - int i; - - DBG(""); - for (i = num - 1; i >= 0; i--) - if (regs[i].disable_load >= 0) - regulator_set_load(s[i].consumer, regs[i].disable_load); regulator_bulk_disable(num, s); } @@ -550,37 +552,9 @@ static void dsi_phy_regulator_disable(struct msm_dsi_phy *phy) static int dsi_phy_regulator_enable(struct msm_dsi_phy *phy) { struct regulator_bulk_data *s = phy->supplies; - const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs; - struct device *dev = &phy->pdev->dev; int num = phy->cfg->reg_cfg.num; - int ret, i; - DBG(""); - for (i = 0; i < num; i++) { - if (regs[i].enable_load >= 0) { - ret = regulator_set_load(s[i].consumer, - regs[i].enable_load); - if (ret < 0) { - DRM_DEV_ERROR(dev, - "regulator %d set op mode failed, %d\n", - i, ret); - goto fail; - } - } - } - - ret = regulator_bulk_enable(num, s); - if (ret < 0) { - DRM_DEV_ERROR(dev, "regulator enable failed, %d\n", ret); - goto fail; - } - - return 0; - -fail: - for (i--; i >= 0; i--) - regulator_set_load(s[i].consumer, regs[i].disable_load); - return ret; + return regulator_bulk_enable(num, s); } static int dsi_phy_enable_resource(struct msm_dsi_phy *phy) diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c index 08b015ea1b1e..6a10a1448051 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c @@ -1033,7 +1033,7 @@ const struct msm_dsi_phy_cfg dsi_phy_10nm_cfgs = { .reg_cfg = { .num = 1, .regs = { - {"vdds", 36000, 32}, + {"vdds", 36000}, }, }, .ops = { @@ -1055,7 +1055,7 @@ const struct msm_dsi_phy_cfg dsi_phy_10nm_8998_cfgs = { .reg_cfg = { .num = 1, .regs = { - {"vdds", 36000, 32}, + {"vdds", 36000}, }, }, .ops = { diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c index 8199c53567f4..0f3d4c56c333 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c @@ -1029,7 +1029,7 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs = { .reg_cfg = { .num = 1, .regs = { - {"vcca", 17000, 32}, + {"vcca", 17000}, }, }, .ops = { @@ -1050,7 +1050,7 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_660_cfgs = { .reg_cfg = { .num = 1, .regs = { - {"vcca", 73400, 32}, + {"vcca", 73400}, }, }, .ops = { @@ -1071,7 +1071,7 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_8953_cfgs = { .reg_cfg = { .num = 1, .regs = { - {"vcca", 17000, 32}, + {"vcca", 17000}, }, }, .ops = { diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c index ee7c418a1c29..b7c621d94981 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c @@ -134,8 +134,8 @@ const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs = { .reg_cfg = { .num = 2, .regs = { - {"vddio", 100000, 100}, /* 1.8 V */ - {"vcca", 10000, 100}, /* 1.0 V */ + {"vddio", 100000}, /* 1.8 V */ + {"vcca", 10000}, /* 1.0 V */ }, }, .ops = { diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c index 48eab80b548e..6beba387640d 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c @@ -774,7 +774,7 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs = { .reg_cfg = { .num = 1, .regs = { - {"vddio", 100000, 100}, + {"vddio", 100000}, }, }, .ops = { @@ -795,7 +795,7 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_famb_cfgs = { .reg_cfg = { .num = 1, .regs = { - {"vddio", 100000, 100}, + {"vddio", 100000}, }, }, .ops = { @@ -816,7 +816,7 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs = { .reg_cfg = { .num = 1, .regs = { - {"vddio", 100000, 100}, /* 1.8 V */ + {"vddio", 100000}, /* 1.8 V */ }, }, .ops = { diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c index fc56cdcc9ad6..2e942b10fffa 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c @@ -653,7 +653,7 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs = { .reg_cfg = { .num = 1, .regs = { - {"vddio", 100000, 100}, /* 1.8 V */ + {"vddio", 100000}, /* 1.8 V */ }, }, .ops = { diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c index 66ed1919a1db..9c7c49ce1200 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c @@ -1041,7 +1041,7 @@ const struct msm_dsi_phy_cfg dsi_phy_7nm_cfgs = { .reg_cfg = { .num = 1, .regs = { - {"vdds", 36000, 32}, + {"vdds", 36000}, }, }, .ops = { @@ -1068,7 +1068,7 @@ const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs = { .reg_cfg = { .num = 1, .regs = { - {"vdds", 36000, 32}, + {"vdds", 36000}, }, }, .ops = { @@ -1090,7 +1090,7 @@ const struct msm_dsi_phy_cfg dsi_phy_7nm_7280_cfgs = { .reg_cfg = { .num = 1, .regs = { - {"vdds", 37550, 0}, + {"vdds", 37550}, }, }, .ops = {
As of commit 5451781dadf8 ("regulator: core: Only count load for enabled consumers"), a load isn't counted for a disabled regulator. That means all the code in the DSI driver to specify and set loads before disabling a regulator is not actually doing anything useful. Let's remove it. It should be noted that all of the loads set that were being specified were pointless noise anyway. The only use for this number is to pick between low power and high power modes of regulators. Regulators appear to do this changeover at loads on the order of 10000 uA. You would a lot of clients of the same rail for that 100 uA number to count for anything. Note that now that we get rid of the setting of the load at disable time, we can just set the load once when we first get the regulator and then forget it. It should also be noted that the regulator functions regulator_bulk_enable() and regulator_set_load() already print error messages when they encounter problems so while moving things around we get rid of some extra error prints. Signed-off-by: Douglas Anderson <dianders@chromium.org> --- drivers/gpu/drm/msm/dsi/dsi.h | 1 - drivers/gpu/drm/msm/dsi/dsi_cfg.c | 52 +++++++++---------- drivers/gpu/drm/msm/dsi/dsi_host.c | 45 ++++------------ drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 46 ++++------------ drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 4 +- drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 6 +-- drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c | 4 +- drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 6 +-- .../gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 2 +- drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 6 +-- 10 files changed, 60 insertions(+), 112 deletions(-)