@@ -71,3 +71,8 @@ config DRM_RCAR_WRITEBACK
bool
default y if ARM64
depends on DRM_RCAR_DU
+
+config DRM_RCAR_LIB
+ bool
+ default y
+ depends on DRM_RCAR_DU
@@ -6,6 +6,8 @@ rcar-du-drm-y := rcar_du_crtc.o \
rcar_du_kms.o \
rcar_du_plane.o \
+rcar-du-drm-$(CONFIG_DRM_RCAR_LIB) += rcar_du_encoder_lib.o
+
rcar-du-drm-$(CONFIG_DRM_RCAR_VSP) += rcar_du_vsp.o
rcar-du-drm-$(CONFIG_DRM_RCAR_WRITEBACK) += rcar_du_writeback.o
@@ -2,137 +2,25 @@
/*
* R-Car Display Unit Encoder
*
- * Copyright (C) 2013-2014 Renesas Electronics Corporation
+ * Copyright (C) 2013-2022 Renesas Electronics Corporation
*
* Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
*/
#include <linux/export.h>
#include <linux/of.h>
-#include <linux/slab.h>
-
-#include <drm/drm_bridge.h>
-#include <drm/drm_bridge_connector.h>
-#include <drm/drm_crtc.h>
-#include <drm/drm_managed.h>
-#include <drm/drm_modeset_helper_vtables.h>
-#include <drm/drm_panel.h>
#include "rcar_du_drv.h"
-#include "rcar_du_encoder.h"
-#include "rcar_du_kms.h"
-#include "rcar_lvds.h"
+#include "rcar_du_encoder_lib.h"
/* -----------------------------------------------------------------------------
* Encoder
*/
-static unsigned int rcar_du_encoder_count_ports(struct device_node *node)
-{
- struct device_node *ports;
- struct device_node *port;
- unsigned int num_ports = 0;
-
- ports = of_get_child_by_name(node, "ports");
- if (!ports)
- ports = of_node_get(node);
-
- for_each_child_of_node(ports, port) {
- if (of_node_name_eq(port, "port"))
- num_ports++;
- }
-
- of_node_put(ports);
-
- return num_ports;
-}
-
-static const struct drm_encoder_funcs rcar_du_encoder_funcs = {
-};
-
int rcar_du_encoder_init(struct rcar_du_device *rcdu,
enum rcar_du_output output,
struct device_node *enc_node)
{
- struct rcar_du_encoder *renc;
- struct drm_connector *connector;
- struct drm_bridge *bridge;
- int ret;
-
- /*
- * Locate the DRM bridge from the DT node. For the DPAD outputs, if the
- * DT node has a single port, assume that it describes a panel and
- * create a panel bridge.
- */
- if ((output == RCAR_DU_OUTPUT_DPAD0 ||
- output == RCAR_DU_OUTPUT_DPAD1) &&
- rcar_du_encoder_count_ports(enc_node) == 1) {
- struct drm_panel *panel = of_drm_find_panel(enc_node);
-
- if (IS_ERR(panel))
- return PTR_ERR(panel);
-
- bridge = devm_drm_panel_bridge_add_typed(rcdu->dev, panel,
- DRM_MODE_CONNECTOR_DPI);
- if (IS_ERR(bridge))
- return PTR_ERR(bridge);
- } else {
- bridge = of_drm_find_bridge(enc_node);
- if (!bridge)
- return -EPROBE_DEFER;
-
- if (output == RCAR_DU_OUTPUT_LVDS0 ||
- output == RCAR_DU_OUTPUT_LVDS1)
- rcdu->lvds[output - RCAR_DU_OUTPUT_LVDS0] = bridge;
- }
-
- /*
- * Create and initialize the encoder. On Gen3, skip the LVDS1 output if
- * the LVDS1 encoder is used as a companion for LVDS0 in dual-link
- * mode, or any LVDS output if it isn't connected. The latter may happen
- * on D3 or E3 as the LVDS encoders are needed to provide the pixel
- * clock to the DU, even when the LVDS outputs are not used.
- */
- if (rcdu->info->gen >= 3) {
- if (output == RCAR_DU_OUTPUT_LVDS1 &&
- rcar_lvds_dual_link(bridge))
- return -ENOLINK;
-
- if ((output == RCAR_DU_OUTPUT_LVDS0 ||
- output == RCAR_DU_OUTPUT_LVDS1) &&
- !rcar_lvds_is_connected(bridge))
- return -ENOLINK;
- }
-
- dev_dbg(rcdu->dev, "initializing encoder %pOF for output %s\n",
- enc_node, rcar_du_output_name(output));
-
- renc = drmm_encoder_alloc(&rcdu->ddev, struct rcar_du_encoder, base,
- &rcar_du_encoder_funcs, DRM_MODE_ENCODER_NONE,
- NULL);
- if (!renc)
- return -ENOMEM;
-
- renc->output = output;
-
- /* Attach the bridge to the encoder. */
- ret = drm_bridge_attach(&renc->base, bridge, NULL,
- DRM_BRIDGE_ATTACH_NO_CONNECTOR);
- if (ret) {
- dev_err(rcdu->dev,
- "failed to attach bridge %pOF for output %s (%d)\n",
- bridge->of_node, rcar_du_output_name(output), ret);
- return ret;
- }
-
- /* Create the connector for the chain of bridges. */
- connector = drm_bridge_connector_init(&rcdu->ddev, &renc->base);
- if (IS_ERR(connector)) {
- dev_err(rcdu->dev,
- "failed to created connector for output %s (%ld)\n",
- rcar_du_output_name(output), PTR_ERR(connector));
- return PTR_ERR(connector);
- }
-
- return drm_connector_attach_encoder(connector, &renc->base);
+ return rcar_du_lib_encoder_init(rcdu, output, enc_node,
+ rcar_du_output_name(output));
}
@@ -2,7 +2,7 @@
/*
* R-Car Display Unit Encoder
*
- * Copyright (C) 2013-2014 Renesas Electronics Corporation
+ * Copyright (C) 2013-2022 Renesas Electronics Corporation
*
* Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
*/
@@ -10,17 +10,7 @@
#ifndef __RCAR_DU_ENCODER_H__
#define __RCAR_DU_ENCODER_H__
-#include <drm/drm_encoder.h>
-
-struct rcar_du_device;
-
-struct rcar_du_encoder {
- struct drm_encoder base;
- enum rcar_du_output output;
-};
-
-#define to_rcar_encoder(e) \
- container_of(e, struct rcar_du_encoder, base)
+#include "rcar_du_encoder_lib.h"
int rcar_du_encoder_init(struct rcar_du_device *rcdu,
enum rcar_du_output output,
new file mode 100644
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * R-Car Display Unit Encoder Lib
+ *
+ * Copyright (C) 2013-2022 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#include <linux/export.h>
+#include <linux/of.h>
+
+#include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_panel.h>
+
+#include "rcar_du_drv.h"
+#include "rcar_du_encoder.h"
+#include "rcar_du_kms.h"
+#include "rcar_lvds.h"
+
+/* -----------------------------------------------------------------------------
+ * Encoder
+ */
+
+static unsigned int rcar_du_encoder_count_ports(struct device_node *node)
+{
+ struct device_node *ports;
+ struct device_node *port;
+ unsigned int num_ports = 0;
+
+ ports = of_get_child_by_name(node, "ports");
+ if (!ports)
+ ports = of_node_get(node);
+
+ for_each_child_of_node(ports, port) {
+ if (of_node_name_eq(port, "port"))
+ num_ports++;
+ }
+
+ of_node_put(ports);
+
+ return num_ports;
+}
+
+static const struct drm_encoder_funcs rcar_du_encoder_funcs = {
+};
+
+int rcar_du_lib_encoder_init(struct rcar_du_device *rcdu,
+ enum rcar_du_output output,
+ struct device_node *enc_node,
+ const char *output_name)
+{
+ struct rcar_du_encoder *renc;
+ struct drm_connector *connector;
+ struct drm_bridge *bridge;
+ int ret;
+
+ /*
+ * Locate the DRM bridge from the DT node. For the DPAD outputs, if the
+ * DT node has a single port, assume that it describes a panel and
+ * create a panel bridge.
+ */
+ if ((output == RCAR_DU_OUTPUT_DPAD0 ||
+ output == RCAR_DU_OUTPUT_DPAD1) &&
+ rcar_du_encoder_count_ports(enc_node) == 1) {
+ struct drm_panel *panel = of_drm_find_panel(enc_node);
+
+ if (IS_ERR(panel))
+ return PTR_ERR(panel);
+
+ bridge = devm_drm_panel_bridge_add_typed(rcdu->dev, panel,
+ DRM_MODE_CONNECTOR_DPI);
+ if (IS_ERR(bridge))
+ return PTR_ERR(bridge);
+ } else {
+ bridge = of_drm_find_bridge(enc_node);
+ if (!bridge)
+ return -EPROBE_DEFER;
+
+ if (output == RCAR_DU_OUTPUT_LVDS0 ||
+ output == RCAR_DU_OUTPUT_LVDS1)
+ rcdu->lvds[output - RCAR_DU_OUTPUT_LVDS0] = bridge;
+ }
+
+ /*
+ * Create and initialize the encoder. On Gen3, skip the LVDS1 output if
+ * the LVDS1 encoder is used as a companion for LVDS0 in dual-link
+ * mode, or any LVDS output if it isn't connected. The latter may happen
+ * on D3 or E3 as the LVDS encoders are needed to provide the pixel
+ * clock to the DU, even when the LVDS outputs are not used.
+ */
+ if (rcdu->info->gen >= 3) {
+ if (output == RCAR_DU_OUTPUT_LVDS1 &&
+ rcar_lvds_dual_link(bridge))
+ return -ENOLINK;
+
+ if ((output == RCAR_DU_OUTPUT_LVDS0 ||
+ output == RCAR_DU_OUTPUT_LVDS1) &&
+ !rcar_lvds_is_connected(bridge))
+ return -ENOLINK;
+ }
+
+ dev_dbg(rcdu->dev, "initializing encoder %pOF for output %s\n",
+ enc_node, rcar_du_output_name(output));
+
+ renc = drmm_encoder_alloc(&rcdu->ddev, struct rcar_du_encoder, base,
+ &rcar_du_encoder_funcs, DRM_MODE_ENCODER_NONE,
+ NULL);
+ if (!renc)
+ return -ENOMEM;
+
+ renc->output = output;
+
+ /* Attach the bridge to the encoder. */
+ ret = drm_bridge_attach(&renc->base, bridge, NULL,
+ DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+ if (ret) {
+ dev_err(rcdu->dev,
+ "failed to attach bridge %pOF for output %s (%d)\n",
+ bridge->of_node, output_name, ret);
+ return ret;
+ }
+
+ /* Create the connector for the chain of bridges. */
+ connector = drm_bridge_connector_init(&rcdu->ddev, &renc->base);
+ if (IS_ERR(connector)) {
+ dev_err(rcdu->dev,
+ "failed to created connector for output %s (%ld)\n",
+ output_name, PTR_ERR(connector));
+ return PTR_ERR(connector);
+ }
+
+ return drm_connector_attach_encoder(connector, &renc->base);
+}
new file mode 100644
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * R-Car Display Unit Encoder Lib
+ *
+ * Copyright (C) 2013-2022 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#ifndef __RCAR_DU_ENCODER_LIB_H__
+#define __RCAR_DU_ENCODER_LIB_H__
+
+#include <drm/drm_encoder.h>
+
+struct rcar_du_device;
+
+struct rcar_du_encoder {
+ struct drm_encoder base;
+ enum rcar_du_output output;
+};
+
+#define to_rcar_encoder(e) \
+ container_of(e, struct rcar_du_encoder, base)
+
+int rcar_du_lib_encoder_init(struct rcar_du_device *rcdu,
+ enum rcar_du_output output,
+ struct device_node *enc_node,
+ const char *output_name);
+
+#endif /* __RCAR_DU_ENCODER_LIB_H__ */
Add RCar DU encoder lib support by moving rcar_du_encoder_count_ports() and rcar_du_encoder_funcs to the lib file and added rcar_du_encoder_funcs() to share the common code between RCar and RZ/G2L DU encoder drivers. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> --- drivers/gpu/drm/rcar-du/Kconfig | 5 + drivers/gpu/drm/rcar-du/Makefile | 2 + drivers/gpu/drm/rcar-du/rcar_du_encoder.c | 120 +-------------- drivers/gpu/drm/rcar-du/rcar_du_encoder.h | 14 +- drivers/gpu/drm/rcar-du/rcar_du_encoder_lib.c | 138 ++++++++++++++++++ drivers/gpu/drm/rcar-du/rcar_du_encoder_lib.h | 30 ++++ 6 files changed, 181 insertions(+), 128 deletions(-) create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_encoder_lib.c create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_encoder_lib.h