[02/18] phy: mediatek: tphy: remove macros to prepare bitfield value

Message ID	20220920090038.15133-3-chunfeng.yun@mediatek.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <dri-devel-bounces@lists.freedesktop.org> From: Chunfeng Yun <chunfeng.yun@mediatek.com> To: Chun-Kuang Hu <chunkuang.hu@kernel.org>, Vinod Koul <vkoul@kernel.org> Subject: [PATCH 02/18] phy: mediatek: tphy: remove macros to prepare bitfield value Date: Tue, 20 Sep 2022 17:00:22 +0800 Message-ID: <20220920090038.15133-3-chunfeng.yun@mediatek.com> In-Reply-To: <20220920090038.15133-1-chunfeng.yun@mediatek.com> References: <20220920090038.15133-1-chunfeng.yun@mediatek.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain Precedence: list Cc: Jitao Shi <jitao.shi@mediatek.com>, linux-phy@lists.infradead.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, Kishon Vijay Abraham I <kishon@ti.com>, Matthias Brugger <matthias.bgg@gmail.com>, linux-mediatek@lists.infradead.org, Chunfeng Yun <chunfeng.yun@mediatek.com>, Stanley Chu <stanley.chu@mediatek.com>, linux-arm-kernel@lists.infradead.org Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" <dri-devel-bounces@lists.freedesktop.org>
Series	unify register access and macros \| expand [00/18] unify register access and macros [01/18] phy: mediatek: add a new helper to update bitfield [02/18] phy: mediatek: tphy: remove macros to prepare bitfield value [03/18] phy: mediatek: xsphy: remove macros used to prepare bitfield value [04/18] phy: mediatek: ufs: use common register access helpers [05/18] phy: mediatek: pcie: use new helper to update register bits [06/18] phy: mediatek: hdmi: mt2701: use GENMASK and BIT to generate mask and bits [07/18] phy: mediatek: hdmi: mt2701: use FIELD_PREP to prepare bits field [08/18] phy: mediatek: hdmi: mt2701: use common helper to access registers [09/18] phy: mediatek: hdmi: mt8173: use GENMASK to generate bits mask [10/18] phy: mediatek: hdmi: mt8173: use FIELD_PREP to prepare bits field [11/18] phy: mediatek: hdmi: mt8173: use common helper to access registers [12/18] phy: mediatek: hdmi: remove register access helpers [13/18] phy: mediatek: mipi: mt8173: use GENMASK to generate bits mask [14/18] phy: mediatek: mipi: mt8173: use FIELD_PREP to prepare bits field [15/18] phy: mediatek: mipi: mt8173: use common helper to access registers [16/18] phy: mediatek: mipi: mt8183: use GENMASK to generate bits mask [17/18] phy: mediatek: mipi: mt8183: use common helper to access registers [18/18] phy: mediatek: mipi: remove register access helpers

diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c index cc10298bc70d..e906a82791bd 100644 --- a/drivers/phy/mediatek/phy-mtk-tphy.c +++ b/drivers/phy/mediatek/phy-mtk-tphy.c @@ -49,37 +49,28 @@ #define U3P_USBPHYACR0 0x000 #define PA0_RG_U2PLL_FORCE_ON BIT(15) #define PA0_USB20_PLL_PREDIV GENMASK(7, 6) -#define PA0_USB20_PLL_PREDIV_VAL(x) ((0x3 & (x)) << 6) #define PA0_RG_USB20_INTR_EN BIT(5) #define U3P_USBPHYACR1 0x004 #define PA1_RG_INTR_CAL GENMASK(23, 19) -#define PA1_RG_INTR_CAL_VAL(x) ((0x1f & (x)) << 19) #define PA1_RG_VRT_SEL GENMASK(14, 12) -#define PA1_RG_VRT_SEL_VAL(x) ((0x7 & (x)) << 12) #define PA1_RG_TERM_SEL GENMASK(10, 8) -#define PA1_RG_TERM_SEL_VAL(x) ((0x7 & (x)) << 8) #define U3P_USBPHYACR2 0x008 #define PA2_RG_U2PLL_BW GENMASK(21, 19) -#define PA2_RG_U2PLL_BW_VAL(x) ((0x7 & (x)) << 19) #define PA2_RG_SIF_U2PLL_FORCE_EN BIT(18) #define U3P_USBPHYACR5 0x014 #define PA5_RG_U2_HSTX_SRCAL_EN BIT(15) #define PA5_RG_U2_HSTX_SRCTRL GENMASK(14, 12) -#define PA5_RG_U2_HSTX_SRCTRL_VAL(x) ((0x7 & (x)) << 12) #define PA5_RG_U2_HS_100U_U3_EN BIT(11) #define U3P_USBPHYACR6 0x018 #define PA6_RG_U2_PRE_EMP GENMASK(31, 30) -#define PA6_RG_U2_PRE_EMP_VAL(x) ((0x3 & (x)) << 30) #define PA6_RG_U2_BC11_SW_EN BIT(23) #define PA6_RG_U2_OTG_VBUSCMP_EN BIT(20) #define PA6_RG_U2_DISCTH GENMASK(7, 4) -#define PA6_RG_U2_DISCTH_VAL(x) ((0xf & (x)) << 4) #define PA6_RG_U2_SQTH GENMASK(3, 0) -#define PA6_RG_U2_SQTH_VAL(x) (0xf & (x)) #define U3P_U2PHYACR4 0x020 #define P2C_RG_USB20_GPIO_CTL BIT(9) @@ -106,11 +97,9 @@ #define P2C_FORCE_SUSPENDM BIT(18) #define P2C_FORCE_TERMSEL BIT(17) #define P2C_RG_DATAIN GENMASK(13, 10) -#define P2C_RG_DATAIN_VAL(x) ((0xf & (x)) << 10) #define P2C_RG_DMPULLDOWN BIT(7) #define P2C_RG_DPPULLDOWN BIT(6) #define P2C_RG_XCVRSEL GENMASK(5, 4) -#define P2C_RG_XCVRSEL_VAL(x) ((0x3 & (x)) << 4) #define P2C_RG_SUSPENDM BIT(3) #define P2C_RG_TERMSEL BIT(2) #define P2C_DTM0_PART_MASK \ @@ -141,87 +130,65 @@ #define U3P_U3_PHYA_REG0 0x000 #define P3A_RG_IEXT_INTR GENMASK(15, 10) -#define P3A_RG_IEXT_INTR_VAL(x) ((0x3f & (x)) << 10) #define P3A_RG_CLKDRV_OFF GENMASK(3, 2) -#define P3A_RG_CLKDRV_OFF_VAL(x) ((0x3 & (x)) << 2) #define U3P_U3_PHYA_REG1 0x004 #define P3A_RG_CLKDRV_AMP GENMASK(31, 29) -#define P3A_RG_CLKDRV_AMP_VAL(x) ((0x7 & (x)) << 29) #define U3P_U3_PHYA_REG6 0x018 #define P3A_RG_TX_EIDLE_CM GENMASK(31, 28) -#define P3A_RG_TX_EIDLE_CM_VAL(x) ((0xf & (x)) << 28) #define U3P_U3_PHYA_REG9 0x024 #define P3A_RG_RX_DAC_MUX GENMASK(5, 1) -#define P3A_RG_RX_DAC_MUX_VAL(x) ((0x1f & (x)) << 1) #define U3P_U3_PHYA_DA_REG0 0x100 #define P3A_RG_XTAL_EXT_PE2H GENMASK(17, 16) -#define P3A_RG_XTAL_EXT_PE2H_VAL(x) ((0x3 & (x)) << 16) #define P3A_RG_XTAL_EXT_PE1H GENMASK(13, 12) -#define P3A_RG_XTAL_EXT_PE1H_VAL(x) ((0x3 & (x)) << 12) #define P3A_RG_XTAL_EXT_EN_U3 GENMASK(11, 10) -#define P3A_RG_XTAL_EXT_EN_U3_VAL(x) ((0x3 & (x)) << 10) #define U3P_U3_PHYA_DA_REG4 0x108 #define P3A_RG_PLL_DIVEN_PE2H GENMASK(21, 19) #define P3A_RG_PLL_BC_PE2H GENMASK(7, 6) -#define P3A_RG_PLL_BC_PE2H_VAL(x) ((0x3 & (x)) << 6) #define U3P_U3_PHYA_DA_REG5 0x10c #define P3A_RG_PLL_BR_PE2H GENMASK(29, 28) -#define P3A_RG_PLL_BR_PE2H_VAL(x) ((0x3 & (x)) << 28) #define P3A_RG_PLL_IC_PE2H GENMASK(15, 12) -#define P3A_RG_PLL_IC_PE2H_VAL(x) ((0xf & (x)) << 12) #define U3P_U3_PHYA_DA_REG6 0x110 #define P3A_RG_PLL_IR_PE2H GENMASK(19, 16) -#define P3A_RG_PLL_IR_PE2H_VAL(x) ((0xf & (x)) << 16) #define U3P_U3_PHYA_DA_REG7 0x114 #define P3A_RG_PLL_BP_PE2H GENMASK(19, 16) -#define P3A_RG_PLL_BP_PE2H_VAL(x) ((0xf & (x)) << 16) #define U3P_U3_PHYA_DA_REG20 0x13c #define P3A_RG_PLL_DELTA1_PE2H GENMASK(31, 16) -#define P3A_RG_PLL_DELTA1_PE2H_VAL(x) ((0xffff & (x)) << 16) #define U3P_U3_PHYA_DA_REG25 0x148 #define P3A_RG_PLL_DELTA_PE2H GENMASK(15, 0) -#define P3A_RG_PLL_DELTA_PE2H_VAL(x) (0xffff & (x)) #define U3P_U3_PHYD_LFPS1 0x00c #define P3D_RG_FWAKE_TH GENMASK(21, 16) -#define P3D_RG_FWAKE_TH_VAL(x) ((0x3f & (x)) << 16) #define U3P_U3_PHYD_IMPCAL0 0x010 #define P3D_RG_FORCE_TX_IMPEL BIT(31) #define P3D_RG_TX_IMPEL GENMASK(28, 24) -#define P3D_RG_TX_IMPEL_VAL(x) ((0x1f & (x)) << 24) #define U3P_U3_PHYD_IMPCAL1 0x014 #define P3D_RG_FORCE_RX_IMPEL BIT(31) #define P3D_RG_RX_IMPEL GENMASK(28, 24) -#define P3D_RG_RX_IMPEL_VAL(x) ((0x1f & (x)) << 24) #define U3P_U3_PHYD_RSV 0x054 #define P3D_RG_EFUSE_AUTO_LOAD_DIS BIT(12) #define U3P_U3_PHYD_CDR1 0x05c #define P3D_RG_CDR_BIR_LTD1 GENMASK(28, 24) -#define P3D_RG_CDR_BIR_LTD1_VAL(x) ((0x1f & (x)) << 24) #define P3D_RG_CDR_BIR_LTD0 GENMASK(12, 8) -#define P3D_RG_CDR_BIR_LTD0_VAL(x) ((0x1f & (x)) << 8) #define U3P_U3_PHYD_RXDET1 0x128 #define P3D_RG_RXDET_STB2_SET GENMASK(17, 9) -#define P3D_RG_RXDET_STB2_SET_VAL(x) ((0x1ff & (x)) << 9) #define U3P_U3_PHYD_RXDET2 0x12c #define P3D_RG_RXDET_STB2_SET_P3 GENMASK(8, 0) -#define P3D_RG_RXDET_STB2_SET_P3_VAL(x) (0x1ff & (x)) #define U3P_SPLLC_XTALCTL3 0x018 #define XC3_RG_U3_XTAL_RX_PWD BIT(9) @@ -229,10 +196,8 @@ #define U3P_U2FREQ_FMCR0 0x00 #define P2F_RG_MONCLK_SEL GENMASK(27, 26) -#define P2F_RG_MONCLK_SEL_VAL(x) ((0x3 & (x)) << 26) #define P2F_RG_FREQDET_EN BIT(24) #define P2F_RG_CYCLECNT GENMASK(23, 0) -#define P2F_RG_CYCLECNT_VAL(x) ((P2F_RG_CYCLECNT) & (x)) #define U3P_U2FREQ_VALUE 0x0c @@ -249,60 +214,45 @@ #define PHYD_CTRL_SIGNAL_MODE4 0x1c /* CDR Charge Pump P-path current adjustment */ #define RG_CDR_BICLTD1_GEN1_MSK GENMASK(23, 20) -#define RG_CDR_BICLTD1_GEN1_VAL(x) ((0xf & (x)) << 20) #define RG_CDR_BICLTD0_GEN1_MSK GENMASK(11, 8) -#define RG_CDR_BICLTD0_GEN1_VAL(x) ((0xf & (x)) << 8) #define PHYD_DESIGN_OPTION2 0x24 /* Symbol lock count selection */ #define RG_LOCK_CNT_SEL_MSK GENMASK(5, 4) -#define RG_LOCK_CNT_SEL_VAL(x) ((0x3 & (x)) << 4) #define PHYD_DESIGN_OPTION9 0x40 /* COMWAK GAP width window */ #define RG_TG_MAX_MSK GENMASK(20, 16) -#define RG_TG_MAX_VAL(x) ((0x1f & (x)) << 16) /* COMINIT GAP width window */ #define RG_T2_MAX_MSK GENMASK(13, 8) -#define RG_T2_MAX_VAL(x) ((0x3f & (x)) << 8) /* COMWAK GAP width window */ #define RG_TG_MIN_MSK GENMASK(7, 5) -#define RG_TG_MIN_VAL(x) ((0x7 & (x)) << 5) /* COMINIT GAP width window */ #define RG_T2_MIN_MSK GENMASK(4, 0) -#define RG_T2_MIN_VAL(x) (0x1f & (x)) #define ANA_RG_CTRL_SIGNAL1 0x4c /* TX driver tail current control for 0dB de-empahsis mdoe for Gen1 speed */ #define RG_IDRV_0DB_GEN1_MSK GENMASK(13, 8) -#define RG_IDRV_0DB_GEN1_VAL(x) ((0x3f & (x)) << 8) #define ANA_RG_CTRL_SIGNAL4 0x58 #define RG_CDR_BICLTR_GEN1_MSK GENMASK(23, 20) -#define RG_CDR_BICLTR_GEN1_VAL(x) ((0xf & (x)) << 20) /* Loop filter R1 resistance adjustment for Gen1 speed */ #define RG_CDR_BR_GEN2_MSK GENMASK(10, 8) -#define RG_CDR_BR_GEN2_VAL(x) ((0x7 & (x)) << 8) #define ANA_RG_CTRL_SIGNAL6 0x60 /* I-path capacitance adjustment for Gen1 */ #define RG_CDR_BC_GEN1_MSK GENMASK(28, 24) -#define RG_CDR_BC_GEN1_VAL(x) ((0x1f & (x)) << 24) #define RG_CDR_BIRLTR_GEN1_MSK GENMASK(4, 0) -#define RG_CDR_BIRLTR_GEN1_VAL(x) (0x1f & (x)) #define ANA_EQ_EYE_CTRL_SIGNAL1 0x6c /* RX Gen1 LEQ tuning step */ #define RG_EQ_DLEQ_LFI_GEN1_MSK GENMASK(11, 8) -#define RG_EQ_DLEQ_LFI_GEN1_VAL(x) ((0xf & (x)) << 8) #define ANA_EQ_EYE_CTRL_SIGNAL4 0xd8 #define RG_CDR_BIRLTD0_GEN1_MSK GENMASK(20, 16) -#define RG_CDR_BIRLTD0_GEN1_VAL(x) ((0x1f & (x)) << 16) #define ANA_EQ_EYE_CTRL_SIGNAL5 0xdc #define RG_CDR_BIRLTD0_GEN3_MSK GENMASK(4, 0) -#define RG_CDR_BIRLTD0_GEN3_VAL(x) (0x1f & (x)) /* PHY switch between pcie/usb3/sgmii/sata */ #define USB_PHY_SWITCH_CTRL 0x0 @@ -414,9 +364,9 @@ static void hs_slew_rate_calibrate(struct mtk_tphy *tphy, /* set cycle count as 1024, and select u2 channel */ tmp = readl(fmreg + U3P_U2FREQ_FMCR0); tmp &= ~(P2F_RG_CYCLECNT | P2F_RG_MONCLK_SEL); - tmp |= P2F_RG_CYCLECNT_VAL(U3P_FM_DET_CYCLE_CNT); + tmp |= FIELD_PREP(P2F_RG_CYCLECNT, U3P_FM_DET_CYCLE_CNT); if (tphy->pdata->version == MTK_PHY_V1) - tmp |= P2F_RG_MONCLK_SEL_VAL(instance->index >> 1); + tmp |= FIELD_PREP(P2F_RG_MONCLK_SEL, instance->index >> 1); writel(tmp, fmreg + U3P_U2FREQ_FMCR0); @@ -449,8 +399,8 @@ static void hs_slew_rate_calibrate(struct mtk_tphy *tphy, tphy->src_ref_clk, tphy->src_coef); /* set HS slew rate */ - mtk_phy_update_bits(com + U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCTRL, - PA5_RG_U2_HSTX_SRCTRL_VAL(calibration_val)); + mtk_phy_update_field(com + U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCTRL, + calibration_val); /* disable USB ring oscillator */ mtk_phy_clear_bits(com + U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCAL_EN); @@ -460,33 +410,30 @@ static void u3_phy_instance_init(struct mtk_tphy *tphy, struct mtk_phy_instance *instance) { struct u3phy_banks *u3_banks = &instance->u3_banks; + void __iomem *phya = u3_banks->phya; + void __iomem *phyd = u3_banks->phyd; /* gating PCIe Analog XTAL clock */ mtk_phy_set_bits(u3_banks->spllc + U3P_SPLLC_XTALCTL3, XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD); /* gating XSQ */ - mtk_phy_update_bits(u3_banks->phya + U3P_U3_PHYA_DA_REG0, - P3A_RG_XTAL_EXT_EN_U3, P3A_RG_XTAL_EXT_EN_U3_VAL(2)); + mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG0, P3A_RG_XTAL_EXT_EN_U3, 2); - mtk_phy_update_bits(u3_banks->phya + U3P_U3_PHYA_REG9, - P3A_RG_RX_DAC_MUX, P3A_RG_RX_DAC_MUX_VAL(4)); + mtk_phy_update_field(phya + U3P_U3_PHYA_REG9, P3A_RG_RX_DAC_MUX, 4); - mtk_phy_update_bits(u3_banks->phya + U3P_U3_PHYA_REG6, - P3A_RG_TX_EIDLE_CM, P3A_RG_TX_EIDLE_CM_VAL(0xe)); + mtk_phy_update_field(phya + U3P_U3_PHYA_REG6, P3A_RG_TX_EIDLE_CM, 0xe); mtk_phy_update_bits(u3_banks->phyd + U3P_U3_PHYD_CDR1, P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1, - P3D_RG_CDR_BIR_LTD0_VAL(0xc) | P3D_RG_CDR_BIR_LTD1_VAL(0x3)); + FIELD_PREP(P3D_RG_CDR_BIR_LTD0, 0xc) | + FIELD_PREP(P3D_RG_CDR_BIR_LTD1, 0x3)); - mtk_phy_update_bits(u3_banks->phyd + U3P_U3_PHYD_LFPS1, - P3D_RG_FWAKE_TH, P3D_RG_FWAKE_TH_VAL(0x34)); + mtk_phy_update_field(phyd + U3P_U3_PHYD_LFPS1, P3D_RG_FWAKE_TH, 0x34); - mtk_phy_update_bits(u3_banks->phyd + U3P_U3_PHYD_RXDET1, - P3D_RG_RXDET_STB2_SET, P3D_RG_RXDET_STB2_SET_VAL(0x10)); + mtk_phy_update_field(phyd + U3P_U3_PHYD_RXDET1, P3D_RG_RXDET_STB2_SET, 0x10); - mtk_phy_update_bits(u3_banks->phyd + U3P_U3_PHYD_RXDET2, - P3D_RG_RXDET_STB2_SET_P3, P3D_RG_RXDET_STB2_SET_P3_VAL(0x10)); + mtk_phy_update_field(phyd + U3P_U3_PHYD_RXDET2, P3D_RG_RXDET_STB2_SET_P3, 0x10); dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index); } @@ -500,11 +447,9 @@ static void u2_phy_pll_26m_set(struct mtk_tphy *tphy, if (!tphy->pdata->sw_pll_48m_to_26m) return; - mtk_phy_update_bits(com + U3P_USBPHYACR0, PA0_USB20_PLL_PREDIV, - PA0_USB20_PLL_PREDIV_VAL(0)); + mtk_phy_update_field(com + U3P_USBPHYACR0, PA0_USB20_PLL_PREDIV, 0); - mtk_phy_update_bits(com + U3P_USBPHYACR2, PA2_RG_U2PLL_BW, - PA2_RG_U2PLL_BW_VAL(3)); + mtk_phy_update_field(com + U3P_USBPHYACR2, PA2_RG_U2PLL_BW, 3); writel(P2R_RG_U2PLL_FBDIV_26M, com + U3P_U2PHYA_RESV); @@ -550,7 +495,7 @@ static void u2_phy_instance_init(struct mtk_tphy *tphy, /* DP/DM BC1.1 path Disable */ mtk_phy_clear_bits(com + U3P_USBPHYACR6, PA6_RG_U2_BC11_SW_EN); - mtk_phy_update_bits(com + U3P_USBPHYACR6, PA6_RG_U2_SQTH, PA6_RG_U2_SQTH_VAL(2)); + mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_SQTH, 2); /* Workaround only for mt8195, HW fix it for others (V3) */ u2_phy_pll_26m_set(tphy, instance); @@ -653,43 +598,39 @@ static void pcie_phy_instance_init(struct mtk_tphy *tphy, mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG0, P3A_RG_XTAL_EXT_PE1H | P3A_RG_XTAL_EXT_PE2H, - P3A_RG_XTAL_EXT_PE1H_VAL(0x2) | P3A_RG_XTAL_EXT_PE2H_VAL(0x2)); + FIELD_PREP(P3A_RG_XTAL_EXT_PE1H, 0x2) | + FIELD_PREP(P3A_RG_XTAL_EXT_PE2H, 0x2)); /* ref clk drive */ - mtk_phy_update_bits(phya + U3P_U3_PHYA_REG1, P3A_RG_CLKDRV_AMP, - P3A_RG_CLKDRV_AMP_VAL(0x4)); + mtk_phy_update_field(phya + U3P_U3_PHYA_REG1, P3A_RG_CLKDRV_AMP, 0x4); - mtk_phy_update_bits(phya + U3P_U3_PHYA_REG0, P3A_RG_CLKDRV_OFF, - P3A_RG_CLKDRV_OFF_VAL(0x1)); + mtk_phy_update_field(phya + U3P_U3_PHYA_REG0, P3A_RG_CLKDRV_OFF, 0x1); /* SSC delta -5000ppm */ - mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG20, P3A_RG_PLL_DELTA1_PE2H, - P3A_RG_PLL_DELTA1_PE2H_VAL(0x3c)); + mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG20, P3A_RG_PLL_DELTA1_PE2H, 0x3c); - mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG25, P3A_RG_PLL_DELTA_PE2H, - P3A_RG_PLL_DELTA_PE2H_VAL(0x36)); + mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG25, P3A_RG_PLL_DELTA_PE2H, 0x36); /* change pll BW 0.6M */ mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG5, P3A_RG_PLL_BR_PE2H | P3A_RG_PLL_IC_PE2H, - P3A_RG_PLL_BR_PE2H_VAL(0x1) | P3A_RG_PLL_IC_PE2H_VAL(0x1)); + FIELD_PREP(P3A_RG_PLL_BR_PE2H, 0x1) | + FIELD_PREP(P3A_RG_PLL_IC_PE2H, 0x1)); mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG4, P3A_RG_PLL_DIVEN_PE2H | P3A_RG_PLL_BC_PE2H, - P3A_RG_PLL_BC_PE2H_VAL(0x3)); + FIELD_PREP(P3A_RG_PLL_BC_PE2H, 0x3)); - mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG6, P3A_RG_PLL_IR_PE2H, - P3A_RG_PLL_IR_PE2H_VAL(0x2)); + mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG6, P3A_RG_PLL_IR_PE2H, 0x2); - mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG7, P3A_RG_PLL_BP_PE2H, - P3A_RG_PLL_BP_PE2H_VAL(0xa)); + mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG7, P3A_RG_PLL_BP_PE2H, 0xa); /* Tx Detect Rx Timing: 10us -> 5us */ - mtk_phy_update_bits(u3_banks->phyd + U3P_U3_PHYD_RXDET1, - P3D_RG_RXDET_STB2_SET, P3D_RG_RXDET_STB2_SET_VAL(0x10)); + mtk_phy_update_field(u3_banks->phyd + U3P_U3_PHYD_RXDET1, + P3D_RG_RXDET_STB2_SET, 0x10); - mtk_phy_update_bits(u3_banks->phyd + U3P_U3_PHYD_RXDET2, - P3D_RG_RXDET_STB2_SET_P3, P3D_RG_RXDET_STB2_SET_P3_VAL(0x10)); + mtk_phy_update_field(u3_banks->phyd + U3P_U3_PHYD_RXDET2, + P3D_RG_RXDET_STB2_SET_P3, 0x10); /* wait for PCIe subsys register to active */ usleep_range(2500, 3000); @@ -730,38 +671,38 @@ static void sata_phy_instance_init(struct mtk_tphy *tphy, /* charge current adjustment */ mtk_phy_update_bits(phyd + ANA_RG_CTRL_SIGNAL6, RG_CDR_BIRLTR_GEN1_MSK | RG_CDR_BC_GEN1_MSK, - RG_CDR_BIRLTR_GEN1_VAL(0x6) | RG_CDR_BC_GEN1_VAL(0x1a)); + FIELD_PREP(RG_CDR_BIRLTR_GEN1_MSK, 0x6) | + FIELD_PREP(RG_CDR_BC_GEN1_MSK, 0x1a)); - mtk_phy_update_bits(phyd + ANA_EQ_EYE_CTRL_SIGNAL4, RG_CDR_BIRLTD0_GEN1_MSK, - RG_CDR_BIRLTD0_GEN1_VAL(0x18)); + mtk_phy_update_field(phyd + ANA_EQ_EYE_CTRL_SIGNAL4, RG_CDR_BIRLTD0_GEN1_MSK, 0x18); - mtk_phy_update_bits(phyd + ANA_EQ_EYE_CTRL_SIGNAL5, RG_CDR_BIRLTD0_GEN3_MSK, - RG_CDR_BIRLTD0_GEN3_VAL(0x06)); + mtk_phy_update_field(phyd + ANA_EQ_EYE_CTRL_SIGNAL5, RG_CDR_BIRLTD0_GEN3_MSK, 0x06); mtk_phy_update_bits(phyd + ANA_RG_CTRL_SIGNAL4, RG_CDR_BICLTR_GEN1_MSK | RG_CDR_BR_GEN2_MSK, - RG_CDR_BICLTR_GEN1_VAL(0x0c) | RG_CDR_BR_GEN2_VAL(0x07)); + FIELD_PREP(RG_CDR_BICLTR_GEN1_MSK, 0x0c) | + FIELD_PREP(RG_CDR_BR_GEN2_MSK, 0x07)); mtk_phy_update_bits(phyd + PHYD_CTRL_SIGNAL_MODE4, RG_CDR_BICLTD0_GEN1_MSK | RG_CDR_BICLTD1_GEN1_MSK, - RG_CDR_BICLTD0_GEN1_VAL(0x08) | RG_CDR_BICLTD1_GEN1_VAL(0x02)); + FIELD_PREP(RG_CDR_BICLTD0_GEN1_MSK, 0x08) | + FIELD_PREP(RG_CDR_BICLTD1_GEN1_MSK, 0x02)); - mtk_phy_update_bits(phyd + PHYD_DESIGN_OPTION2, RG_LOCK_CNT_SEL_MSK, - RG_LOCK_CNT_SEL_VAL(0x02)); + mtk_phy_update_field(phyd + PHYD_DESIGN_OPTION2, RG_LOCK_CNT_SEL_MSK, 0x02); mtk_phy_update_bits(phyd + PHYD_DESIGN_OPTION9, RG_T2_MIN_MSK | RG_TG_MIN_MSK, - RG_T2_MIN_VAL(0x12) | RG_TG_MIN_VAL(0x04)); + FIELD_PREP(RG_T2_MIN_MSK, 0x12) | + FIELD_PREP(RG_TG_MIN_MSK, 0x04)); mtk_phy_update_bits(phyd + PHYD_DESIGN_OPTION9, RG_T2_MAX_MSK | RG_TG_MAX_MSK, - RG_T2_MAX_VAL(0x31) | RG_TG_MAX_VAL(0x0e)); + FIELD_PREP(RG_T2_MAX_MSK, 0x31) | + FIELD_PREP(RG_TG_MAX_MSK, 0x0e)); - mtk_phy_update_bits(phyd + ANA_RG_CTRL_SIGNAL1, RG_IDRV_0DB_GEN1_MSK, - RG_IDRV_0DB_GEN1_VAL(0x20)); + mtk_phy_update_field(phyd + ANA_RG_CTRL_SIGNAL1, RG_IDRV_0DB_GEN1_MSK, 0x20); - mtk_phy_update_bits(phyd + ANA_EQ_EYE_CTRL_SIGNAL1, RG_EQ_DLEQ_LFI_GEN1_MSK, - RG_EQ_DLEQ_LFI_GEN1_VAL(0x03)); + mtk_phy_update_field(phyd + ANA_EQ_EYE_CTRL_SIGNAL1, RG_EQ_DLEQ_LFI_GEN1_MSK, 0x03); dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index); } @@ -857,33 +798,33 @@ static void u2_phy_props_set(struct mtk_tphy *tphy, mtk_phy_set_bits(com + U3P_U2PHYBC12C, P2C_RG_CHGDT_EN); if (tphy->pdata->version < MTK_PHY_V3 && instance->eye_src) - mtk_phy_update_bits(com + U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCTRL, - PA5_RG_U2_HSTX_SRCTRL_VAL(instance->eye_src)); + mtk_phy_update_field(com + U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCTRL, + instance->eye_src); if (instance->eye_vrt) - mtk_phy_update_bits(com + U3P_USBPHYACR1, PA1_RG_VRT_SEL, - PA1_RG_VRT_SEL_VAL(instance->eye_vrt)); + mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_VRT_SEL, + instance->eye_vrt); if (instance->eye_term) - mtk_phy_update_bits(com + U3P_USBPHYACR1, PA1_RG_TERM_SEL, - PA1_RG_TERM_SEL_VAL(instance->eye_term)); + mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_TERM_SEL, + instance->eye_term); if (instance->intr) { if (u2_banks->misc) mtk_phy_set_bits(u2_banks->misc + U3P_MISC_REG1, MR1_EFUSE_AUTO_LOAD_DIS); - mtk_phy_update_bits(com + U3P_USBPHYACR1, PA1_RG_INTR_CAL, - PA1_RG_INTR_CAL_VAL(instance->intr)); + mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_INTR_CAL, + instance->intr); } if (instance->discth) - mtk_phy_update_bits(com + U3P_USBPHYACR6, PA6_RG_U2_DISCTH, - PA6_RG_U2_DISCTH_VAL(instance->discth)); + mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_DISCTH, + instance->discth); if (instance->pre_emphasis) - mtk_phy_update_bits(com + U3P_USBPHYACR6, PA6_RG_U2_PRE_EMP, - PA6_RG_U2_PRE_EMP_VAL(instance->pre_emphasis)); + mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_PRE_EMP, + instance->pre_emphasis); } /* type switch for usb3/pcie/sgmii/sata */ @@ -1032,23 +973,23 @@ static void phy_efuse_set(struct mtk_phy_instance *instance) case PHY_TYPE_USB2: mtk_phy_set_bits(u2_banks->misc + U3P_MISC_REG1, MR1_EFUSE_AUTO_LOAD_DIS); - mtk_phy_update_bits(u2_banks->com + U3P_USBPHYACR1, PA1_RG_INTR_CAL, - PA1_RG_INTR_CAL_VAL(instance->efuse_intr)); + mtk_phy_update_field(u2_banks->com + U3P_USBPHYACR1, PA1_RG_INTR_CAL, + instance->efuse_intr); break; case PHY_TYPE_USB3: case PHY_TYPE_PCIE: mtk_phy_set_bits(u3_banks->phyd + U3P_U3_PHYD_RSV, P3D_RG_EFUSE_AUTO_LOAD_DIS); - mtk_phy_update_bits(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_TX_IMPEL, - P3D_RG_TX_IMPEL_VAL(instance->efuse_tx_imp)); + mtk_phy_update_field(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_TX_IMPEL, + instance->efuse_tx_imp); mtk_phy_set_bits(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_FORCE_TX_IMPEL); - mtk_phy_update_bits(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_RX_IMPEL, - P3D_RG_RX_IMPEL_VAL(instance->efuse_rx_imp)); + mtk_phy_update_field(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_RX_IMPEL, + instance->efuse_rx_imp); mtk_phy_set_bits(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_FORCE_RX_IMPEL); - mtk_phy_update_bits(u3_banks->phya + U3P_U3_PHYA_REG0, P3A_RG_IEXT_INTR, - P3A_RG_IEXT_INTR_VAL(instance->efuse_intr)); + mtk_phy_update_field(u3_banks->phya + U3P_U3_PHYA_REG0, P3A_RG_IEXT_INTR, + instance->efuse_intr); break; default: dev_warn(dev, "no sw efuse for type %d\n", instance->type);

[02/18] phy: mediatek: tphy: remove macros to prepare bitfield value

Commit Message

Patch