| Message ID | 20221107104916.18733-3-tzimmermann@suse.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | video/fbdev: Support 'nomodeset' in PCI drivers | expand |
On 11/7/22 11:49, Thomas Zimmermann wrote: > Support the kernel's nomodeset parameter for all PCI-based fbdev > drivers that use aperture helpers to remove other, hardware-agnostic > graphics drivers. > > The parameter is a simple way of using the firmware-provided scanout > buffer if the hardware's native driver is broken. Nah... it's probably not broken, but you want it disabled in order to use the DRM driver instead? > The same effect > could be achieved with per-driver options, but the importance of the > graphics output for many users makes a single, unified approach > worthwhile. > > With nomodeset specified, the fbdev driver module will not load. This > unifies behavior with similar DRM drivers. In DRM helpers, modules > first check the nomodeset parameter before registering the PCI > driver. As fbdev has no such module helpers, we have to modify each > driver individually. Ok. > The name 'nomodeset' is slightly misleading, but has been chosen for > historical reasons. Several drivers implemented it before it became a > general option for DRM. So keeping the existing name was preferred over > introducing a new one. > diff --git a/drivers/video/fbdev/aty/aty128fb.c b/drivers/video/fbdev/aty/aty128fb.c > index 57e398fe7a81c..1a26ac2865d65 100644 > --- a/drivers/video/fbdev/aty/aty128fb.c > +++ b/drivers/video/fbdev/aty/aty128fb.c > @@ -2503,7 +2504,12 @@ static int aty128fb_init(void) > { > #ifndef MODULE > char *option = NULL; > +#endif > + > + if (video_firmware_drivers_only()) > + return -ENODEV; I think it makes sense to give at least some info, why a specific driver wasn't loaded, e.g. something like this kernel message: aty128fb: Driver disabled due to "nomodeset" kernel parameter. If you e.g. change the function video_firmware_drivers_only() to become video_firmware_drivers_only(const char *drivername) then you could print such a message in video_firmware_drivers_only(). And I don't like very much the name of function video_firmware_drivers_only(), but don't have any other better idea right now either... Helge
Hi Am 07.11.22 um 14:57 schrieb Helge Deller: > On 11/7/22 11:49, Thomas Zimmermann wrote: >> Support the kernel's nomodeset parameter for all PCI-based fbdev >> drivers that use aperture helpers to remove other, hardware-agnostic >> graphics drivers. >> >> The parameter is a simple way of using the firmware-provided scanout >> buffer if the hardware's native driver is broken. > > Nah... it's probably not broken, but you want it disabled in order > to use the DRM driver instead? No, it's really for broken native drivers or any kind of problematic modesetting. Most DRM drivers already respect the nomodeset option and won't load when given. All you'd get are the generic drivers, such as simpledrm, efifb or simplefb. There are better options of configuring video output on the kernel command line. But as graphics output is such a fundamental feature to using a computer, we found that a simple and easy option to workaround erroneous systems would benefit DRM users; hence the nomodeset parameter. As fbdev drivers also do modesetting, supporting the parameter simply unifies the behavior. > >> The same effect >> could be achieved with per-driver options, but the importance of the >> graphics output for many users makes a single, unified approach >> worthwhile. >> >> With nomodeset specified, the fbdev driver module will not load. This >> unifies behavior with similar DRM drivers. In DRM helpers, modules >> first check the nomodeset parameter before registering the PCI >> driver. As fbdev has no such module helpers, we have to modify each >> driver individually. > > Ok. > >> The name 'nomodeset' is slightly misleading, but has been chosen for >> historical reasons. Several drivers implemented it before it became a >> general option for DRM. So keeping the existing name was preferred over >> introducing a new one. > >> diff --git a/drivers/video/fbdev/aty/aty128fb.c >> b/drivers/video/fbdev/aty/aty128fb.c >> index 57e398fe7a81c..1a26ac2865d65 100644 >> --- a/drivers/video/fbdev/aty/aty128fb.c >> +++ b/drivers/video/fbdev/aty/aty128fb.c >> @@ -2503,7 +2504,12 @@ static int aty128fb_init(void) >> { >> #ifndef MODULE >> char *option = NULL; >> +#endif >> + >> + if (video_firmware_drivers_only()) >> + return -ENODEV; > > I think it makes sense to give at least some info, why a specific > driver wasn't loaded, e.g. something like this kernel message: > aty128fb: Driver disabled due to "nomodeset" kernel parameter. > > If you e.g. change the function video_firmware_drivers_only() > to become video_firmware_drivers_only(const char *drivername) > then you could print such a message in video_firmware_drivers_only() Well, we do have such a message in disable_modeset() already. [1] [1] https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/drm_nomodeset.c#L18 > > And I don't like very much the name of function > video_firmware_drivers_only(), > but don't have any other better idea right now either... It's part of the 'video' module, hence the prefix. The 'nomodeset' option used to be implemented in several DRM drivers. It's an awful name, but we didn't want to remove it or introduce a new one for the same feature. So we kept nomodeset for all of DRM. Then we started bikeshedding the function name that returns the setting. And firmware-drivers-only is the best description of what is happening here. So that's how the name happend. Best regards Thomas > > Helge
On 11/7/22 16:30, Thomas Zimmermann wrote: > Hi > > Am 07.11.22 um 14:57 schrieb Helge Deller: >> On 11/7/22 11:49, Thomas Zimmermann wrote: >>> Support the kernel's nomodeset parameter for all PCI-based fbdev >>> drivers that use aperture helpers to remove other, hardware-agnostic >>> graphics drivers. >>> >>> The parameter is a simple way of using the firmware-provided scanout >>> buffer if the hardware's native driver is broken. >> >> Nah... it's probably not broken, but you want it disabled in order >> to use the DRM driver instead? > > No, it's really for broken native drivers or any kind of problematic > modesetting. Most DRM drivers already respect the nomodeset option > and won't load when given. All you'd get are the generic drivers, > such as simpledrm, efifb or simplefb. > > There are better options of configuring video output on the kernel > command line. But as graphics output is such a fundamental feature > to using a computer, we found that a simple and easy option to > workaround erroneous systems would benefit DRM users; hence the > nomodeset parameter. > > As fbdev drivers also do modesetting, supporting the parameter simply > unifies the behavior. Ok. >>> The same effect >>> could be achieved with per-driver options, but the importance of the >>> graphics output for many users makes a single, unified approach >>> worthwhile. >>> >>> With nomodeset specified, the fbdev driver module will not load. This >>> unifies behavior with similar DRM drivers. In DRM helpers, modules >>> first check the nomodeset parameter before registering the PCI >>> driver. As fbdev has no such module helpers, we have to modify each >>> driver individually. >> >> Ok. >> >>> The name 'nomodeset' is slightly misleading, but has been chosen for >>> historical reasons. Several drivers implemented it before it became a >>> general option for DRM. So keeping the existing name was preferred over >>> introducing a new one. >> >>> diff --git a/drivers/video/fbdev/aty/aty128fb.c b/drivers/video/fbdev/aty/aty128fb.c >>> index 57e398fe7a81c..1a26ac2865d65 100644 >>> --- a/drivers/video/fbdev/aty/aty128fb.c >>> +++ b/drivers/video/fbdev/aty/aty128fb.c >>> @@ -2503,7 +2504,12 @@ static int aty128fb_init(void) >>> { >>> #ifndef MODULE >>> char *option = NULL; >>> +#endif >>> + >>> + if (video_firmware_drivers_only()) >>> + return -ENODEV; >> >> I think it makes sense to give at least some info, why a specific >> driver wasn't loaded, e.g. something like this kernel message: >> aty128fb: Driver disabled due to "nomodeset" kernel parameter. >> >> If you e.g. change the function video_firmware_drivers_only() >> to become video_firmware_drivers_only(const char *drivername) >> then you could print such a message in video_firmware_drivers_only() > > Well, we do have such a message in disable_modeset() already. [1] > [1] https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/drm_nomodeset.c#L18 Yes, I saw it, but that message quite generic. If for example my atyfb doesn't show up, I would grep dmesg for "aty" and not "nomodeset"... >> And I don't like very much the name of function video_firmware_drivers_only(), >> but don't have any other better idea right now either... > > It's part of the 'video' module, hence the prefix. The 'nomodeset' > option used to be implemented in several DRM drivers. It's an awful > name, but we didn't want to remove it or introduce a new one for the > same feature. So we kept nomodeset for all of DRM. Then we started > bikeshedding the function name that returns the setting. And > firmware-drivers-only is the best description of what is happening > here. So that's how the name happend. video_modesetting_disabled() ? (Just an idea) Helge
Hi Am 07.11.22 um 21:46 schrieb Helge Deller: > On 11/7/22 16:30, Thomas Zimmermann wrote: >> Hi >> >> Am 07.11.22 um 14:57 schrieb Helge Deller: >>> On 11/7/22 11:49, Thomas Zimmermann wrote: >>>> Support the kernel's nomodeset parameter for all PCI-based fbdev >>>> drivers that use aperture helpers to remove other, hardware-agnostic >>>> graphics drivers. >>>> >>>> The parameter is a simple way of using the firmware-provided scanout >>>> buffer if the hardware's native driver is broken. >>> >>> Nah... it's probably not broken, but you want it disabled in order >>> to use the DRM driver instead? >> >> No, it's really for broken native drivers or any kind of problematic >> modesetting. Most DRM drivers already respect the nomodeset option >> and won't load when given. All you'd get are the generic drivers, >> such as simpledrm, efifb or simplefb. >> >> There are better options of configuring video output on the kernel >> command line. But as graphics output is such a fundamental feature >> to using a computer, we found that a simple and easy option to >> workaround erroneous systems would benefit DRM users; hence the >> nomodeset parameter. >> >> As fbdev drivers also do modesetting, supporting the parameter simply >> unifies the behavior. > > Ok. > >>>> The same effect >>>> could be achieved with per-driver options, but the importance of the >>>> graphics output for many users makes a single, unified approach >>>> worthwhile. >>>> >>>> With nomodeset specified, the fbdev driver module will not load. This >>>> unifies behavior with similar DRM drivers. In DRM helpers, modules >>>> first check the nomodeset parameter before registering the PCI >>>> driver. As fbdev has no such module helpers, we have to modify each >>>> driver individually. >>> >>> Ok. >>> >>>> The name 'nomodeset' is slightly misleading, but has been chosen for >>>> historical reasons. Several drivers implemented it before it became a >>>> general option for DRM. So keeping the existing name was preferred over >>>> introducing a new one. >>> >>>> diff --git a/drivers/video/fbdev/aty/aty128fb.c >>>> b/drivers/video/fbdev/aty/aty128fb.c >>>> index 57e398fe7a81c..1a26ac2865d65 100644 >>>> --- a/drivers/video/fbdev/aty/aty128fb.c >>>> +++ b/drivers/video/fbdev/aty/aty128fb.c >>>> @@ -2503,7 +2504,12 @@ static int aty128fb_init(void) >>>> { >>>> #ifndef MODULE >>>> char *option = NULL; >>>> +#endif >>>> + >>>> + if (video_firmware_drivers_only()) >>>> + return -ENODEV; >>> >>> I think it makes sense to give at least some info, why a specific >>> driver wasn't loaded, e.g. something like this kernel message: >>> aty128fb: Driver disabled due to "nomodeset" kernel parameter. >>> >>> If you e.g. change the function video_firmware_drivers_only() >>> to become video_firmware_drivers_only(const char *drivername) >>> then you could print such a message in video_firmware_drivers_only() >> >> Well, we do have such a message in disable_modeset() already. [1] >> [1] >> https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/drm_nomodeset.c#L18 > > Yes, I saw it, but that message quite generic. > If for example my atyfb doesn't show up, I would grep dmesg for "aty" and > not "nomodeset"... I'd like to add this to fbdev or the drivers instead of the video helper. On the DRM side, it works a a bit different and I think I have a use case for the function that does not directly involve disabling drivers. See below for a proposal. > > >>> And I don't like very much the name of function >>> video_firmware_drivers_only(), >>> but don't have any other better idea right now either... >> >> It's part of the 'video' module, hence the prefix. The 'nomodeset' >> option used to be implemented in several DRM drivers. It's an awful >> name, but we didn't want to remove it or introduce a new one for the >> same feature. So we kept nomodeset for all of DRM. Then we started >> bikeshedding the function name that returns the setting. And >> firmware-drivers-only is the best description of what is happening >> here. So that's how the name happend. > > video_modesetting_disabled() ? > (Just an idea) The term modesetting is misleading and we had this problem with 'nomodeset' already. There are still plenty of drivers with mode setting, such as the USB-based ones. It's also not so easy on the DRM side, where a modesetting operation is one of many effects of loading an atomic state. Maybe let's leave the name is for now? If we ever find the perfect name, it's a simple rename with sed. My proposal would be to add a little helper to fbdev that includes your suggestions: bool fb_modesetting_disabled(const char *drvname) { fwonly = video_firmware_drivers_only() if (fbonly && drvname) pr_warn("") return fbonly; } Drivers can use that for the test. Best regards Thomas > > Helge
On 11/7/22 11:49, Thomas Zimmermann wrote: > Support the kernel's nomodeset parameter for all PCI-based fbdev > drivers that use aperture helpers to remove other, hardware-agnostic > graphics drivers. > > The parameter is a simple way of using the firmware-provided scanout > buffer if the hardware's native driver is broken. The same effect > could be achieved with per-driver options, but the importance of the > graphics output for many users makes a single, unified approach > worthwhile. > > With nomodeset specified, the fbdev driver module will not load. This > unifies behavior with similar DRM drivers. In DRM helpers, modules > first check the nomodeset parameter before registering the PCI > driver. As fbdev has no such module helpers, we have to modify each > driver individually. > > The name 'nomodeset' is slightly misleading, but has been chosen for > historical reasons. Several drivers implemented it before it became a > general option for DRM. So keeping the existing name was preferred over > introducing a new one. > > Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> > --- Agreed that makes sense to have this in fbdev as well for consistency. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
On 11/8/22 09:16, Thomas Zimmermann wrote: > Hi [...] > > My proposal would be to add a little helper to fbdev that includes your > suggestions: > > bool fb_modesetting_disabled(const char *drvname) > { > fwonly = video_firmware_drivers_only() > if (fbonly && drvname) > pr_warn("") > return fbonly; > } > Agreed with this proposal.
On 11/11/22 10:49, Javier Martinez Canillas wrote: > On 11/8/22 09:16, Thomas Zimmermann wrote: >> Hi > > [...] > >> >> My proposal would be to add a little helper to fbdev that includes your >> suggestions: >> >> bool fb_modesetting_disabled(const char *drvname) >> { >> fwonly = video_firmware_drivers_only() >> if (fbonly && drvname) >> pr_warn("") >> return fbonly; >> } I'm still wondering why you can't simply merge it with what is printed in [1] https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/drm_nomodeset.c#L18 Other than that, your the proposal is okay, if you adjust your patches to call this new function "fb_modesetting_disabled()" instead of calling video_firmware_drivers_only() like this: > + if (video_firmware_drivers_only()) > + return -ENODEV; Helge
Hi Am 11.11.22 um 11:49 schrieb Helge Deller: > On 11/11/22 10:49, Javier Martinez Canillas wrote: >> On 11/8/22 09:16, Thomas Zimmermann wrote: >>> Hi >> >> [...] >> >>> >>> My proposal would be to add a little helper to fbdev that includes your >>> suggestions: >>> >>> bool fb_modesetting_disabled(const char *drvname) >>> { >>> fwonly = video_firmware_drivers_only() >>> if (fbonly && drvname) >>> pr_warn("") >>> return fbonly; >>> } > > I'm still wondering why you can't simply merge it with what is printed in > [1] > https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/drm_nomodeset.c#L18 I don't understand. That message is still there after moving the code around. It is always printed if the nomodeset parameter is given. In addition to that, you get a per-driver warning for fbdev, so that it's clear which drivers are affected. Best regards Thomas > > Other than that, your the proposal is okay, if you adjust your patches to > call this new function "fb_modesetting_disabled()" instead of > calling video_firmware_drivers_only() like this: > >> + if (video_firmware_drivers_only()) >> + return -ENODEV; > > Helge
On 11/11/22 12:42, Thomas Zimmermann wrote: > Hi > > Am 11.11.22 um 11:49 schrieb Helge Deller: >> On 11/11/22 10:49, Javier Martinez Canillas wrote: >>> On 11/8/22 09:16, Thomas Zimmermann wrote: >>>> Hi >>> >>> [...] >>> >>>> >>>> My proposal would be to add a little helper to fbdev that includes your >>>> suggestions: >>>> >>>> bool fb_modesetting_disabled(const char *drvname) >>>> { >>>> fwonly = video_firmware_drivers_only() >>>> if (fbonly && drvname) >>>> pr_warn("") >>>> return fbonly; >>>> } >> >> I'm still wondering why you can't simply merge it with what is printed in >> [1] https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/drm_nomodeset.c#L18 > > I don't understand. That message is still there after moving the code > around. Sure. > It is always printed if the nomodeset parameter is given. Yes, but wouldn't it be better if it would print the name of the really affected DRM driver too? Currently it even shows up if you don't have any graphic card installed (and gave that parameter). > In addition to that, you get a per-driver warning for fbdev, so that it's clear which drivers are affected. and a per-drm-driver message would be nice too (can be added by follow-up patches). Helge > > Best regards > Thomas > >> >> Other than that, your the proposal is okay, if you adjust your patches to >> call this new function "fb_modesetting_disabled()" instead of >> calling video_firmware_drivers_only() like this: >> >>> + if (video_firmware_drivers_only()) >>> + return -ENODEV; >> >> Helge >
diff --git a/drivers/staging/sm750fb/Kconfig b/drivers/staging/sm750fb/Kconfig index 8c0d8a873d5b0..acb6c08d09dce 100644 --- a/drivers/staging/sm750fb/Kconfig +++ b/drivers/staging/sm750fb/Kconfig @@ -6,6 +6,7 @@ config FB_SM750 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help Frame buffer driver for the Silicon Motion SM750 chip with 2D accelearion and dual head support. diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c index 168ae2e9005d7..d6f89dd3f59ba 100644 --- a/drivers/staging/sm750fb/sm750.c +++ b/drivers/staging/sm750fb/sm750.c @@ -17,6 +17,7 @@ #include <linux/screen_info.h> #include <linux/console.h> #include <asm/fb.h> +#include <video/nomodeset.h> #include "sm750.h" #include "sm750_accel.h" #include "sm750_cursor.h" @@ -1168,6 +1169,9 @@ static int __init lynxfb_init(void) { char *option; + if (video_firmware_drivers_only()) + return -ENODEV; + #ifdef MODULE option = g_option; #else diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index a98987aa27846..71019b167f8b0 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -227,6 +227,7 @@ config FB_CIRRUS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help This enables support for Cirrus Logic GD542x/543x based boards on Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. @@ -245,6 +246,7 @@ config FB_PM2 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help This is the frame buffer device driver for cards based on the 3D Labs Permedia, Permedia 2 and Permedia 2V chips. @@ -340,6 +342,7 @@ config FB_CYBER2000 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help This enables support for the Integraphics CyberPro 20x0 and 5000 VGA chips used in the Rebel.com Netwinder and other machines. @@ -504,6 +507,7 @@ config FB_CT65550 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help This is the frame buffer device driver for the Chips & Technologies 65550 graphics chip in PowerBooks. @@ -514,6 +518,7 @@ config FB_ASILIANT select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help This is the frame buffer device driver for the Asiliant 69030 chipset @@ -522,6 +527,7 @@ config FB_IMSTT depends on (FB = y) && PCI select FB_CFB_IMAGEBLIT select FB_MACMODES if PPC_PMAC + select VIDEO_NOMODESET help The IMS Twin Turbo is a PCI-based frame buffer card bundled with many Macintosh and compatible computers. @@ -585,6 +591,7 @@ config FB_TGA select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select BITREVERSE + select VIDEO_NOMODESET help This is the frame buffer device driver for generic TGA and SFB+ graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards, @@ -777,6 +784,7 @@ config FB_XVR500 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help This is the framebuffer device for the Sun XVR-500 and similar graphics cards based upon the 3DLABS Wildcat chipset. The driver @@ -790,6 +798,7 @@ config FB_XVR2500 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help This is the framebuffer device for the Sun XVR-2500 and similar graphics cards based upon the 3DLABS Wildcat chipset. The driver @@ -816,6 +825,7 @@ config FB_PVR2 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help Say Y here if you have a PowerVR 2 card in your box. If you plan to run linux on your Dreamcast, you will have to say Y here. @@ -881,6 +891,7 @@ config FB_NVIDIA select FB_CFB_IMAGEBLIT select BITREVERSE select VGASTATE + select VIDEO_NOMODESET help This driver supports graphics boards with the nVidia chips, TNT and newer. For very old chipsets, such as the RIVA128, then use @@ -928,6 +939,7 @@ config FB_RIVA select FB_CFB_IMAGEBLIT select BITREVERSE select VGASTATE + select VIDEO_NOMODESET help This driver supports graphics boards with the nVidia Riva/Geforce chips. @@ -972,6 +984,7 @@ config FB_I740 select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select VGASTATE + select VIDEO_NOMODESET select FB_DDC help This driver supports graphics cards based on Intel740 chip. @@ -984,6 +997,7 @@ config FB_I810 select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select VGASTATE + select VIDEO_NOMODESET help This driver supports the on-board graphics built in to the Intel 810 and 815 chipsets. Say Y if you have and plan to use such a board. @@ -1034,6 +1048,7 @@ config FB_LE80578 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help This driver supports the LE80578 (Vermilion Range) chipset @@ -1051,6 +1066,7 @@ config FB_INTEL select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select BOOT_VESA_SUPPORT if FB_INTEL = y + select VIDEO_NOMODESET depends on !DRM_I915 help This driver supports the on-board graphics built in to the Intel @@ -1088,6 +1104,7 @@ config FB_MATROX select FB_CFB_IMAGEBLIT select FB_TILEBLITTING select FB_MACMODES if PPC_PMAC + select VIDEO_NOMODESET help Say Y here if you have a Matrox Millennium, Matrox Millennium II, Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox @@ -1208,6 +1225,7 @@ config FB_RADEON select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_MACMODES if PPC + select VIDEO_NOMODESET help Choose this option if you want to use an ATI Radeon graphics card as a framebuffer device. There are both PCI and AGP versions. You @@ -1247,6 +1265,7 @@ config FB_ATY128 select FB_CFB_IMAGEBLIT select FB_BACKLIGHT if FB_ATY128_BACKLIGHT select FB_MACMODES if PPC_PMAC + select VIDEO_NOMODESET help This driver supports graphics boards with the ATI Rage128 chips. Say Y if you have such a graphics board and read @@ -1271,6 +1290,7 @@ config FB_ATY select FB_BACKLIGHT if FB_ATY_BACKLIGHT select FB_MACMODES if PPC select FB_ATY_CT if SPARC64 && PCI + select VIDEO_NOMODESET help This driver supports graphics boards with the ATI Mach64 chips. Say Y if you have such a graphics board. @@ -1321,6 +1341,7 @@ config FB_S3 select FB_TILEBLITTING select FB_SVGALIB select VGASTATE + select VIDEO_NOMODESET select FONT_8x16 if FRAMEBUFFER_CONSOLE help Driver for graphics boards with S3 Trio / S3 Virge chip. @@ -1341,6 +1362,7 @@ config FB_SAVAGE select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select VGASTATE + select VIDEO_NOMODESET help This driver supports notebooks and computers with S3 Savage PCI/AGP chips. @@ -1379,6 +1401,7 @@ config FB_SIS select FB_CFB_IMAGEBLIT select BOOT_VESA_SUPPORT if FB_SIS = y select FB_SIS_300 if !FB_SIS_315 + select VIDEO_NOMODESET help This is the frame buffer device driver for the SiS 300, 315, 330 and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets. @@ -1408,6 +1431,7 @@ config FB_VIA select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select I2C_ALGOBIT + select VIDEO_NOMODESET help This is the frame buffer device driver for Graphics chips of VIA UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/ @@ -1447,6 +1471,7 @@ config FB_NEOMAGIC select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select VGASTATE + select VIDEO_NOMODESET help This driver supports notebooks with NeoMagic PCI chips. Say Y if you have such a graphics card. @@ -1460,6 +1485,7 @@ config FB_KYRO select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help Say Y here if you have a STG4000 / Kyro / PowerVR 3 based graphics board. @@ -1474,6 +1500,7 @@ config FB_3DFX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_MODE_HELPERS + select VIDEO_NOMODESET help This driver supports graphics boards with the 3Dfx Banshee, Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have @@ -1503,6 +1530,7 @@ config FB_VOODOO1 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or Voodoo2 (cvg) based graphics card. @@ -1524,6 +1552,7 @@ config FB_VT8623 select FB_TILEBLITTING select FB_SVGALIB select VGASTATE + select VIDEO_NOMODESET select FONT_8x16 if FRAMEBUFFER_CONSOLE help Driver for CastleRock integrated graphics core in the @@ -1537,6 +1566,7 @@ config FB_TRIDENT select FB_CFB_IMAGEBLIT select FB_DDC select FB_MODE_HELPERS + select VIDEO_NOMODESET help This is the frame buffer device driver for Trident PCI/AGP chipsets. Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D @@ -1560,6 +1590,7 @@ config FB_ARK select FB_TILEBLITTING select FB_SVGALIB select VGASTATE + select VIDEO_NOMODESET select FONT_8x16 if FRAMEBUFFER_CONSOLE help Driver for PCI graphics boards with ARK 2000PV chip @@ -1571,6 +1602,7 @@ config FB_PM3 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help This is the frame buffer device driver for the 3DLabs Permedia3 chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 & @@ -1583,6 +1615,7 @@ config FB_CARMINE select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help This is the frame buffer device driver for the Fujitsu Carmine chip. The driver provides two independent frame buffer devices. @@ -1961,6 +1994,7 @@ config FB_IBM_GXT4500 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help Say Y here to enable support for the IBM GXT4000P/6000P and GXT4500P/6500P display adaptor based on Raster Engine RC1000, @@ -2101,6 +2135,7 @@ config FB_MB862XX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers. @@ -2188,6 +2223,7 @@ config FB_HYPERV select FB_CFB_IMAGEBLIT select FB_DEFERRED_IO select DMA_CMA if HAVE_DMA_CONTIGUOUS && CMA + select VIDEO_NOMODESET help This framebuffer driver supports Microsoft Hyper-V Synthetic Video. @@ -2230,6 +2266,7 @@ config FB_SM712 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help Frame buffer driver for the Silicon Motion SM710, SM712, SM721 and SM722 chips. diff --git a/drivers/video/fbdev/arkfb.c b/drivers/video/fbdev/arkfb.c index 5f8fec9e5fd4d..d76243980cfad 100644 --- a/drivers/video/fbdev/arkfb.c +++ b/drivers/video/fbdev/arkfb.c @@ -25,6 +25,7 @@ #include <linux/init.h> #include <linux/pci.h> #include <linux/console.h> /* Why should fb driver call console functions? because console_lock() */ +#include <video/nomodeset.h> #include <video/vga.h> struct arkfb_info { @@ -1187,7 +1188,12 @@ static int __init arkfb_init(void) #ifndef MODULE char *option = NULL; +#endif + + if (video_firmware_drivers_only()) + return -ENODEV; +#ifndef MODULE if (fb_get_options("arkfb", &option)) return -ENODEV; diff --git a/drivers/video/fbdev/asiliantfb.c b/drivers/video/fbdev/asiliantfb.c index 3818437a8f691..9209d2df95320 100644 --- a/drivers/video/fbdev/asiliantfb.c +++ b/drivers/video/fbdev/asiliantfb.c @@ -43,6 +43,8 @@ #include <linux/pci.h> #include <asm/io.h> +#include <video/nomodeset.h> + /* Built in clock of the 69030 */ static const unsigned Fref = 14318180; @@ -616,6 +618,9 @@ static struct pci_driver asiliantfb_driver = { static int __init asiliantfb_init(void) { + if (video_firmware_drivers_only()) + return -ENODEV; + if (fb_get_options("asiliantfb", NULL)) return -ENODEV; diff --git a/drivers/video/fbdev/aty/aty128fb.c b/drivers/video/fbdev/aty/aty128fb.c index 57e398fe7a81c..1a26ac2865d65 100644 --- a/drivers/video/fbdev/aty/aty128fb.c +++ b/drivers/video/fbdev/aty/aty128fb.c @@ -80,6 +80,7 @@ #include <asm/btext.h> #endif /* CONFIG_BOOTX_TEXT */ +#include <video/nomodeset.h> #include <video/aty128.h> /* Debug flag */ @@ -2503,7 +2504,12 @@ static int aty128fb_init(void) { #ifndef MODULE char *option = NULL; +#endif + + if (video_firmware_drivers_only()) + return -ENODEV; +#ifndef MODULE if (fb_get_options("aty128fb", &option)) return -ENODEV; aty128fb_setup(option); diff --git a/drivers/video/fbdev/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c index b3463d1371520..2b7c643cfdd97 100644 --- a/drivers/video/fbdev/aty/atyfb_base.c +++ b/drivers/video/fbdev/aty/atyfb_base.c @@ -75,6 +75,7 @@ #include <linux/uaccess.h> #include <video/mach64.h> +#include <video/nomodeset.h> #include "atyfb.h" #include "ati_ids.h" @@ -3965,7 +3966,12 @@ static int __init atyfb_init(void) int err1 = 1, err2 = 1; #ifndef MODULE char *option = NULL; +#endif + + if (video_firmware_drivers_only()) + return -ENODEV; +#ifndef MODULE if (fb_get_options("atyfb", &option)) return -ENODEV; atyfb_setup(option); diff --git a/drivers/video/fbdev/aty/radeon_base.c b/drivers/video/fbdev/aty/radeon_base.c index 8b28c9bddd974..53088c706e89b 100644 --- a/drivers/video/fbdev/aty/radeon_base.c +++ b/drivers/video/fbdev/aty/radeon_base.c @@ -85,6 +85,7 @@ #endif /* CONFIG_PPC */ +#include <video/nomodeset.h> #include <video/radeon.h> #include <linux/radeonfb.h> @@ -2607,7 +2608,12 @@ static int __init radeonfb_init (void) { #ifndef MODULE char *option = NULL; +#endif + + if (video_firmware_drivers_only()) + return -ENODEV; +#ifndef MODULE if (fb_get_options("radeonfb", &option)) return -ENODEV; radeonfb_setup(option); diff --git a/drivers/video/fbdev/carminefb.c b/drivers/video/fbdev/carminefb.c index 4651b48a87f93..afdd2994325d7 100644 --- a/drivers/video/fbdev/carminefb.c +++ b/drivers/video/fbdev/carminefb.c @@ -16,6 +16,8 @@ #include <linux/slab.h> #include <linux/module.h> +#include <video/nomodeset.h> + #include "carminefb.h" #include "carminefb_regs.h" @@ -773,6 +775,9 @@ static struct pci_driver carmine_pci_driver = { static int __init carminefb_init(void) { + if (video_firmware_drivers_only()) + return -ENODEV; + if (!(fb_displays & (CARMINE_USE_DISPLAY0 | CARMINE_USE_DISPLAY1))) { printk(KERN_ERR "If you disable both displays than you don't " diff --git a/drivers/video/fbdev/chipsfb.c b/drivers/video/fbdev/chipsfb.c index f1c1c95c1fdf0..f95c07295090e 100644 --- a/drivers/video/fbdev/chipsfb.c +++ b/drivers/video/fbdev/chipsfb.c @@ -29,6 +29,8 @@ #include <linux/pci.h> #include <linux/console.h> +#include <video/nomodeset.h> + #ifdef CONFIG_PMAC_BACKLIGHT #include <asm/backlight.h> #endif @@ -506,6 +508,9 @@ static struct pci_driver chipsfb_driver = { int __init chips_init(void) { + if (video_firmware_drivers_only()) + return -ENODEV; + if (fb_get_options("chipsfb", NULL)) return -ENODEV; diff --git a/drivers/video/fbdev/cirrusfb.c b/drivers/video/fbdev/cirrusfb.c index b08bee43779ae..89da055cd3b95 100644 --- a/drivers/video/fbdev/cirrusfb.c +++ b/drivers/video/fbdev/cirrusfb.c @@ -54,6 +54,7 @@ #include <asm/amigahw.h> #endif +#include <video/nomodeset.h> #include <video/vga.h> #include <video/cirrus.h> @@ -2359,7 +2360,12 @@ static int __init cirrusfb_init(void) #ifndef MODULE char *option = NULL; +#endif + + if (video_firmware_drivers_only()) + return -ENODEV; +#ifndef MODULE if (fb_get_options("cirrusfb", &option)) return -ENODEV; cirrusfb_setup(option); diff --git a/drivers/video/fbdev/cyber2000fb.c b/drivers/video/fbdev/cyber2000fb.c index 31ff1da82c052..afe9f8a4c07a8 100644 --- a/drivers/video/fbdev/cyber2000fb.c +++ b/drivers/video/fbdev/cyber2000fb.c @@ -48,6 +48,7 @@ #include <linux/i2c.h> #include <linux/i2c-algo-bit.h> +#include <video/nomodeset.h> #ifdef __arm__ #include <asm/mach-types.h> @@ -1878,7 +1879,12 @@ static int __init cyber2000fb_init(void) #ifndef MODULE char *option = NULL; +#endif + + if (video_firmware_drivers_only()) + return -ENODEV; +#ifndef MODULE if (fb_get_options("cyber2000fb", &option)) return -ENODEV; cyber2000fb_setup(option); diff --git a/drivers/video/fbdev/geode/Kconfig b/drivers/video/fbdev/geode/Kconfig index ac9c860592aaf..2f8f0fb1dae2f 100644 --- a/drivers/video/fbdev/geode/Kconfig +++ b/drivers/video/fbdev/geode/Kconfig @@ -15,6 +15,7 @@ config FB_GEODE_LX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help Framebuffer driver for the display controller integrated into the AMD Geode LX processors. @@ -30,6 +31,7 @@ config FB_GEODE_GX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help Framebuffer driver for the display controller integrated into the AMD Geode GX processors. @@ -45,6 +47,7 @@ config FB_GEODE_GX1 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help Framebuffer driver for the display controller integrated into the AMD Geode GX1 processor. diff --git a/drivers/video/fbdev/geode/gx1fb_core.c b/drivers/video/fbdev/geode/gx1fb_core.c index 1514c653a84fb..d1296c9b1d1c4 100644 --- a/drivers/video/fbdev/geode/gx1fb_core.c +++ b/drivers/video/fbdev/geode/gx1fb_core.c @@ -17,6 +17,8 @@ #include <linux/init.h> #include <linux/pci.h> +#include <video/nomodeset.h> + #include "geodefb.h" #include "display_gx1.h" #include "video_cs5530.h" @@ -446,7 +448,12 @@ static int __init gx1fb_init(void) { #ifndef MODULE char *option = NULL; +#endif + if (video_firmware_drivers_only()) + return -ENODEV; + +#ifndef MODULE if (fb_get_options("gx1fb", &option)) return -ENODEV; gx1fb_setup(option); diff --git a/drivers/video/fbdev/geode/gxfb_core.c b/drivers/video/fbdev/geode/gxfb_core.c index 2527bd80ec5f5..ddf5a86b35bbf 100644 --- a/drivers/video/fbdev/geode/gxfb_core.c +++ b/drivers/video/fbdev/geode/gxfb_core.c @@ -31,6 +31,8 @@ #include <asm/olpc.h> +#include <video/nomodeset.h> + #include "gxfb.h" static char *mode_option; @@ -511,7 +513,12 @@ static int __init gxfb_init(void) { #ifndef MODULE char *option = NULL; +#endif + if (video_firmware_drivers_only()) + return -ENODEV; + +#ifndef MODULE if (fb_get_options("gxfb", &option)) return -ENODEV; diff --git a/drivers/video/fbdev/geode/lxfb_core.c b/drivers/video/fbdev/geode/lxfb_core.c index 9d26592dbfce9..8ecf4a24966cb 100644 --- a/drivers/video/fbdev/geode/lxfb_core.c +++ b/drivers/video/fbdev/geode/lxfb_core.c @@ -22,6 +22,8 @@ #include <asm/olpc.h> +#include <video/nomodeset.h> + #include "lxfb.h" static char *mode_option; @@ -647,7 +649,12 @@ static int __init lxfb_init(void) { #ifndef MODULE char *option = NULL; +#endif + if (video_firmware_drivers_only()) + return -ENODEV; + +#ifndef MODULE if (fb_get_options("lxfb", &option)) return -ENODEV; diff --git a/drivers/video/fbdev/gxt4500.c b/drivers/video/fbdev/gxt4500.c index 0dcef4bec8d7c..5a8544efb4b61 100644 --- a/drivers/video/fbdev/gxt4500.c +++ b/drivers/video/fbdev/gxt4500.c @@ -16,6 +16,8 @@ #include <linux/delay.h> #include <linux/string.h> +#include <video/nomodeset.h> + #define PCI_DEVICE_ID_IBM_GXT4500P 0x21c #define PCI_DEVICE_ID_IBM_GXT6500P 0x21b #define PCI_DEVICE_ID_IBM_GXT4000P 0x16e @@ -779,6 +781,9 @@ static struct pci_driver gxt4500_driver = { static int gxt4500_init(void) { + if (video_firmware_drivers_only()) + return -ENODEV; + #ifndef MODULE if (fb_get_options("gxt4500", &mode_option)) return -ENODEV; diff --git a/drivers/video/fbdev/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c index 072ce07ba9e05..3cdabc36748f7 100644 --- a/drivers/video/fbdev/hyperv_fb.c +++ b/drivers/video/fbdev/hyperv_fb.c @@ -59,6 +59,8 @@ #include <linux/hyperv.h> +#include <video/nomodeset.h> + /* Hyper-V Synthetic Video Protocol definitions and structures */ #define MAX_VMBUS_PKT_SIZE 0x4000 @@ -1363,6 +1365,9 @@ static int __init hvfb_drv_init(void) { int ret; + if (video_firmware_drivers_only()) + return -ENODEV; + ret = vmbus_driver_register(&hvfb_drv); if (ret != 0) return ret; diff --git a/drivers/video/fbdev/i740fb.c b/drivers/video/fbdev/i740fb.c index b795f6503cb67..ebb0b89fefc5c 100644 --- a/drivers/video/fbdev/i740fb.c +++ b/drivers/video/fbdev/i740fb.c @@ -27,6 +27,7 @@ #include <linux/i2c.h> #include <linux/i2c-algo-bit.h> #include <linux/console.h> +#include <video/nomodeset.h> #include <video/vga.h> #include "i740_reg.h" @@ -1285,7 +1286,12 @@ static int __init i740fb_init(void) { #ifndef MODULE char *option = NULL; +#endif + + if (video_firmware_drivers_only()) + return -ENODEV; +#ifndef MODULE if (fb_get_options("i740fb", &option)) return -ENODEV; i740fb_setup(option); diff --git a/drivers/video/fbdev/i810/i810_main.c b/drivers/video/fbdev/i810/i810_main.c index ff09f8c20bfcb..6e94e4b35f334 100644 --- a/drivers/video/fbdev/i810/i810_main.c +++ b/drivers/video/fbdev/i810/i810_main.c @@ -44,6 +44,8 @@ #include <linux/console.h> #include <linux/io.h> +#include <video/nomodeset.h> + #include <asm/io.h> #include <asm/div64.h> #include <asm/page.h> @@ -2143,6 +2145,9 @@ static int i810fb_init(void) { char *option = NULL; + if (video_firmware_drivers_only()) + return -ENODEV; + if (fb_get_options("i810fb", &option)) return -ENODEV; i810fb_setup(option); @@ -2159,6 +2164,9 @@ static int i810fb_init(void) static int i810fb_init(void) { + if (video_firmware_drivers_only()) + return -ENODEV; + hsync1 *= 1000; hsync2 *= 1000; diff --git a/drivers/video/fbdev/imsttfb.c b/drivers/video/fbdev/imsttfb.c index d7edb9c5d3a3f..ac143dbf76e08 100644 --- a/drivers/video/fbdev/imsttfb.c +++ b/drivers/video/fbdev/imsttfb.c @@ -36,6 +36,8 @@ #include "macmodes.h" #endif +#include <video/nomodeset.h> + #ifndef __powerpc__ #define eieio() /* Enforce In-order Execution of I/O */ #endif @@ -1617,7 +1619,12 @@ static int __init imsttfb_init(void) { #ifndef MODULE char *option = NULL; +#endif + if (video_firmware_drivers_only()) + return -ENODEV; + +#ifndef MODULE if (fb_get_options("imsttfb", &option)) return -ENODEV; diff --git a/drivers/video/fbdev/intelfb/intelfbdrv.c b/drivers/video/fbdev/intelfb/intelfbdrv.c index d4a2891a9a7ac..bca9f0a1854c7 100644 --- a/drivers/video/fbdev/intelfb/intelfbdrv.c +++ b/drivers/video/fbdev/intelfb/intelfbdrv.c @@ -125,6 +125,8 @@ #include <asm/io.h> +#include <video/nomodeset.h> + #include "intelfb.h" #include "intelfbhw.h" #include "../edid.h" @@ -380,6 +382,9 @@ static int __init intelfb_init(void) char *option = NULL; #endif + if (video_firmware_drivers_only()) + return -ENODEV; + DBG_MSG("intelfb_init\n"); INF_MSG("Framebuffer driver for " diff --git a/drivers/video/fbdev/kyro/fbdev.c b/drivers/video/fbdev/kyro/fbdev.c index b4b93054c5208..0e2514db58f5b 100644 --- a/drivers/video/fbdev/kyro/fbdev.c +++ b/drivers/video/fbdev/kyro/fbdev.c @@ -25,6 +25,7 @@ #include <linux/uaccess.h> #include <video/kyro.h> +#include <video/nomodeset.h> #include "STG4000Reg.h" #include "STG4000Interface.h" @@ -789,7 +790,12 @@ static int __init kyrofb_init(void) { #ifndef MODULE char *option = NULL; +#endif + + if (video_firmware_drivers_only()) + return -ENODEV; +#ifndef MODULE if (fb_get_options("kyrofb", &option)) return -ENODEV; kyrofb_setup(option); diff --git a/drivers/video/fbdev/matrox/matroxfb_base.c b/drivers/video/fbdev/matrox/matroxfb_base.c index 775d34115e2df..5797301329957 100644 --- a/drivers/video/fbdev/matrox/matroxfb_base.c +++ b/drivers/video/fbdev/matrox/matroxfb_base.c @@ -123,6 +123,8 @@ static int default_vmode = VMODE_NVRAM; static int default_cmode = CMODE_NVRAM; #endif +#include <video/nomodeset.h> + static void matroxfb_unregister_device(struct matrox_fb_info* minfo); /* --------------------------------------------------------------------- */ @@ -2314,6 +2316,9 @@ static void __init matroxfb_init_params(void) { static int __init matrox_init(void) { int err; + if (video_firmware_drivers_only()) + return -ENODEV; + matroxfb_init_params(); err = pci_register_driver(&matroxfb_driver); dev = -1; /* accept all new devices... */ diff --git a/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c b/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c index 90c79e8c11570..6d61d47d4b43a 100644 --- a/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c +++ b/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c @@ -26,6 +26,8 @@ #include "mb862xxfb.h" #include "mb862xx_reg.h" +#include <video/nomodeset.h> + #define NR_PALETTE 256 #define MB862XX_MEM_SIZE 0x1000000 #define CORALP_MEM_SIZE 0x2000000 @@ -1181,6 +1183,9 @@ static int mb862xxfb_init(void) { int ret = -ENODEV; + if (video_firmware_drivers_only()) + return -ENODEV; + #if defined(CONFIG_FB_MB862XX_LIME) ret = platform_driver_register(&of_platform_mb862xxfb_driver); #endif diff --git a/drivers/video/fbdev/neofb.c b/drivers/video/fbdev/neofb.c index 93a2d2d1abe8f..572275d4f5b60 100644 --- a/drivers/video/fbdev/neofb.c +++ b/drivers/video/fbdev/neofb.c @@ -73,6 +73,7 @@ #include <asm/irq.h> #include <video/vga.h> #include <video/neomagic.h> +#include <video/nomodeset.h> #define NEOFB_VERSION "0.4.2" @@ -2209,7 +2210,12 @@ static int __init neofb_init(void) { #ifndef MODULE char *option = NULL; +#endif + + if (video_firmware_drivers_only()) + return -ENODEV; +#ifndef MODULE if (fb_get_options("neofb", &option)) return -ENODEV; neofb_setup(option); diff --git a/drivers/video/fbdev/nvidia/nvidia.c b/drivers/video/fbdev/nvidia/nvidia.c index 329e2e8133c69..a8bd1c10dff17 100644 --- a/drivers/video/fbdev/nvidia/nvidia.c +++ b/drivers/video/fbdev/nvidia/nvidia.c @@ -26,6 +26,8 @@ #include <asm/btext.h> #endif +#include <video/nomodeset.h> + #include "nv_local.h" #include "nv_type.h" #include "nv_proto.h" @@ -1521,7 +1523,12 @@ static int nvidiafb_init(void) { #ifndef MODULE char *option = NULL; +#endif + if (video_firmware_drivers_only()) + return -ENODEV; + +#ifndef MODULE if (fb_get_options("nvidiafb", &option)) return -ENODEV; nvidiafb_setup(option); diff --git a/drivers/video/fbdev/pm2fb.c b/drivers/video/fbdev/pm2fb.c index 7da715d31a933..37d3672aff88a 100644 --- a/drivers/video/fbdev/pm2fb.c +++ b/drivers/video/fbdev/pm2fb.c @@ -41,6 +41,7 @@ #include <linux/pci.h> #include <video/permedia2.h> #include <video/cvisionppc.h> +#include <video/nomodeset.h> #if !defined(__LITTLE_ENDIAN) && !defined(__BIG_ENDIAN) #error "The endianness of the target host has not been defined." @@ -1799,7 +1800,12 @@ static int __init pm2fb_init(void) { #ifndef MODULE char *option = NULL; +#endif + + if (video_firmware_drivers_only()) + return -ENODEV; +#ifndef MODULE if (fb_get_options("pm2fb", &option)) return -ENODEV; pm2fb_setup(option); diff --git a/drivers/video/fbdev/pm3fb.c b/drivers/video/fbdev/pm3fb.c index ba69846d444f5..75d6580384774 100644 --- a/drivers/video/fbdev/pm3fb.c +++ b/drivers/video/fbdev/pm3fb.c @@ -34,6 +34,7 @@ #include <linux/init.h> #include <linux/pci.h> +#include <video/nomodeset.h> #include <video/pm3fb.h> #if !defined(CONFIG_PCI) @@ -1540,7 +1541,12 @@ static int __init pm3fb_init(void) */ #ifndef MODULE char *option = NULL; +#endif + + if (video_firmware_drivers_only()) + return -ENODEV; +#ifndef MODULE if (fb_get_options("pm3fb", &option)) return -ENODEV; pm3fb_setup(option); diff --git a/drivers/video/fbdev/pvr2fb.c b/drivers/video/fbdev/pvr2fb.c index b73ad14efa201..235774d677262 100644 --- a/drivers/video/fbdev/pvr2fb.c +++ b/drivers/video/fbdev/pvr2fb.c @@ -74,6 +74,8 @@ #include <cpu/sq.h> #endif +#include <video/nomodeset.h> + #ifndef PCI_DEVICE_ID_NEC_NEON250 # define PCI_DEVICE_ID_NEC_NEON250 0x0067 #endif @@ -1082,7 +1084,12 @@ static int __init pvr2fb_init(void) #ifndef MODULE char *option = NULL; +#endif + if (video_firmware_drivers_only()) + return -ENODEV; + +#ifndef MODULE if (fb_get_options("pvr2fb", &option)) return -ENODEV; pvr2fb_setup(option); diff --git a/drivers/video/fbdev/riva/fbdev.c b/drivers/video/fbdev/riva/fbdev.c index 0ea74e28f9152..827cf13d23958 100644 --- a/drivers/video/fbdev/riva/fbdev.c +++ b/drivers/video/fbdev/riva/fbdev.c @@ -47,6 +47,8 @@ #include <asm/backlight.h> #endif +#include <video/nomodeset.h> + #include "rivafb.h" #include "nvreg.h" @@ -2165,7 +2167,12 @@ static int rivafb_init(void) { #ifndef MODULE char *option = NULL; +#endif + if (video_firmware_drivers_only()) + return -ENODEV; + +#ifndef MODULE if (fb_get_options("rivafb", &option)) return -ENODEV; rivafb_setup(option); diff --git a/drivers/video/fbdev/s3fb.c b/drivers/video/fbdev/s3fb.c index 7713274bd04c2..54862c2034a67 100644 --- a/drivers/video/fbdev/s3fb.c +++ b/drivers/video/fbdev/s3fb.c @@ -24,6 +24,7 @@ #include <linux/init.h> #include <linux/pci.h> #include <linux/console.h> /* Why should fb driver call console functions? because console_lock() */ +#include <video/nomodeset.h> #include <video/vga.h> #include <linux/i2c.h> @@ -1558,7 +1559,12 @@ static int __init s3fb_init(void) #ifndef MODULE char *option = NULL; +#endif + + if (video_firmware_drivers_only()) + return -ENODEV; +#ifndef MODULE if (fb_get_options("s3fb", &option)) return -ENODEV; s3fb_setup(option); diff --git a/drivers/video/fbdev/savage/savagefb_driver.c b/drivers/video/fbdev/savage/savagefb_driver.c index b7818b652698f..706c66d480c2f 100644 --- a/drivers/video/fbdev/savage/savagefb_driver.c +++ b/drivers/video/fbdev/savage/savagefb_driver.c @@ -57,6 +57,8 @@ #include <asm/io.h> #include <asm/irq.h> +#include <video/nomodeset.h> + #include "savagefb.h" @@ -2556,6 +2558,9 @@ static int __init savagefb_init(void) DBG("savagefb_init"); + if (video_firmware_drivers_only()) + return -ENODEV; + if (fb_get_options("savagefb", &option)) return -ENODEV; diff --git a/drivers/video/fbdev/sis/sis_main.c b/drivers/video/fbdev/sis/sis_main.c index 1c197c3f95381..d83a6dbe6f7a1 100644 --- a/drivers/video/fbdev/sis/sis_main.c +++ b/drivers/video/fbdev/sis/sis_main.c @@ -41,6 +41,8 @@ #include <linux/uaccess.h> #include <asm/io.h> +#include <video/nomodeset.h> + #include "sis.h" #include "sis_main.h" #include "init301.h" @@ -6588,7 +6590,12 @@ static int __init sisfb_init(void) { #ifndef MODULE char *options = NULL; +#endif + if (video_firmware_drivers_only()) + return -ENODEV; + +#ifndef MODULE if(fb_get_options("sisfb", &options)) return -ENODEV; diff --git a/drivers/video/fbdev/skeletonfb.c b/drivers/video/fbdev/skeletonfb.c index a10f1057293b4..984016b781bb5 100644 --- a/drivers/video/fbdev/skeletonfb.c +++ b/drivers/video/fbdev/skeletonfb.c @@ -54,6 +54,8 @@ #include <linux/init.h> #include <linux/pci.h> +#include <video/nomodeset.h> + /* * This is just simple sample code. * @@ -987,7 +989,12 @@ static int __init xxxfb_init(void) */ #ifndef MODULE char *option = NULL; +#endif + if (video_firmware_drivers_only()) + return -ENODEV; + +#ifndef MODULE if (fb_get_options("xxxfb", &option)) return -ENODEV; xxxfb_setup(option); diff --git a/drivers/video/fbdev/sm712fb.c b/drivers/video/fbdev/sm712fb.c index 3baf33635e65f..a1c3070af2e57 100644 --- a/drivers/video/fbdev/sm712fb.c +++ b/drivers/video/fbdev/sm712fb.c @@ -31,6 +31,8 @@ #include <linux/pm.h> +#include <video/nomodeset.h> + #include "sm712.h" /* @@ -1756,6 +1758,9 @@ static int __init sm712fb_init(void) { char *option = NULL; + if (video_firmware_drivers_only()) + return -ENODEV; + if (fb_get_options("sm712fb", &option)) return -ENODEV; if (option && *option) diff --git a/drivers/video/fbdev/sstfb.c b/drivers/video/fbdev/sstfb.c index a56b24288566b..1892a1760410f 100644 --- a/drivers/video/fbdev/sstfb.c +++ b/drivers/video/fbdev/sstfb.c @@ -90,6 +90,7 @@ #include <linux/init.h> #include <asm/io.h> #include <linux/uaccess.h> +#include <video/nomodeset.h> #include <video/sstfb.h> @@ -1503,6 +1504,9 @@ static int sstfb_init(void) { char *option = NULL; + if (video_firmware_drivers_only()) + return -ENODEV; + if (fb_get_options("sstfb", &option)) return -ENODEV; sstfb_setup(option); diff --git a/drivers/video/fbdev/sunxvr2500.c b/drivers/video/fbdev/sunxvr2500.c index f4059529c6024..4340e0533c587 100644 --- a/drivers/video/fbdev/sunxvr2500.c +++ b/drivers/video/fbdev/sunxvr2500.c @@ -12,6 +12,8 @@ #include <linux/init.h> #include <linux/of_device.h> +#include <video/nomodeset.h> + #include <asm/io.h> struct s3d_info { @@ -247,6 +249,9 @@ static struct pci_driver s3d_driver = { static int __init s3d_init(void) { + if (video_firmware_drivers_only()) + return -ENODEV; + if (fb_get_options("s3d", NULL)) return -ENODEV; diff --git a/drivers/video/fbdev/sunxvr500.c b/drivers/video/fbdev/sunxvr500.c index b0c8cf0c535a4..13b778d457fdd 100644 --- a/drivers/video/fbdev/sunxvr500.c +++ b/drivers/video/fbdev/sunxvr500.c @@ -12,6 +12,8 @@ #include <linux/init.h> #include <linux/of_device.h> +#include <video/nomodeset.h> + #include <asm/io.h> /* XXX This device has a 'dev-comm' property which apparently is @@ -430,6 +432,9 @@ static struct pci_driver e3d_driver = { static int __init e3d_init(void) { + if (video_firmware_drivers_only()) + return -ENODEV; + if (fb_get_options("e3d", NULL)) return -ENODEV; diff --git a/drivers/video/fbdev/tdfxfb.c b/drivers/video/fbdev/tdfxfb.c index 592a913d07189..56d9daa89cdb4 100644 --- a/drivers/video/fbdev/tdfxfb.c +++ b/drivers/video/fbdev/tdfxfb.c @@ -76,6 +76,7 @@ #include <linux/pci.h> #include <asm/io.h> +#include <video/nomodeset.h> #include <video/tdfx.h> #define DPRINTK(a, b...) pr_debug("fb: %s: " a, __func__ , ## b) @@ -1632,7 +1633,12 @@ static int __init tdfxfb_init(void) { #ifndef MODULE char *option = NULL; +#endif + + if (video_firmware_drivers_only()) + return -ENODEV; +#ifndef MODULE if (fb_get_options("tdfxfb", &option)) return -ENODEV; diff --git a/drivers/video/fbdev/tgafb.c b/drivers/video/fbdev/tgafb.c index 251dbd282f5ed..5927fd5d837a4 100644 --- a/drivers/video/fbdev/tgafb.c +++ b/drivers/video/fbdev/tgafb.c @@ -31,6 +31,7 @@ #include <asm/io.h> +#include <video/nomodeset.h> #include <video/tgafb.h> #ifdef CONFIG_TC @@ -1597,7 +1598,12 @@ static int tgafb_init(void) int status; #ifndef MODULE char *option = NULL; +#endif + + if (video_firmware_drivers_only()) + return -ENODEV; +#ifndef MODULE if (fb_get_options("tgafb", &option)) return -ENODEV; tgafb_setup(option); diff --git a/drivers/video/fbdev/tridentfb.c b/drivers/video/fbdev/tridentfb.c index 219ce72923370..a7f3caa3b1e2b 100644 --- a/drivers/video/fbdev/tridentfb.c +++ b/drivers/video/fbdev/tridentfb.c @@ -25,6 +25,7 @@ #include <linux/delay.h> #include <video/vga.h> +#include <video/nomodeset.h> #include <video/trident.h> #include <linux/i2c.h> @@ -1811,7 +1812,12 @@ static int __init tridentfb_init(void) { #ifndef MODULE char *option = NULL; +#endif + + if (video_firmware_drivers_only()) + return -ENODEV; +#ifndef MODULE if (fb_get_options("tridentfb", &option)) return -ENODEV; tridentfb_setup(option); diff --git a/drivers/video/fbdev/vermilion/vermilion.c b/drivers/video/fbdev/vermilion/vermilion.c index 82b36dbb5b1a9..ccef6500534aa 100644 --- a/drivers/video/fbdev/vermilion/vermilion.c +++ b/drivers/video/fbdev/vermilion/vermilion.c @@ -28,6 +28,8 @@ #include <asm/tlbflush.h> #include <linux/mmzone.h> +#include <video/nomodeset.h> + /* #define VERMILION_DEBUG */ #include "vermilion.h" @@ -1057,7 +1059,12 @@ static int __init vmlfb_init(void) #ifndef MODULE char *option = NULL; +#endif + if (video_firmware_drivers_only()) + return -ENODEV; + +#ifndef MODULE if (fb_get_options(MODULE_NAME, &option)) return -ENODEV; #endif diff --git a/drivers/video/fbdev/via/via-core.c b/drivers/video/fbdev/via/via-core.c index 2ee8fcae08dfb..b11531b4b31e8 100644 --- a/drivers/video/fbdev/via/via-core.c +++ b/drivers/video/fbdev/via/via-core.c @@ -20,6 +20,8 @@ #include <linux/list.h> #include <linux/pm.h> +#include <video/nomodeset.h> + /* * The default port config. */ @@ -725,6 +727,9 @@ static int __init via_core_init(void) { int ret; + if (video_firmware_drivers_only()) + return -ENODEV; + ret = viafb_init(); if (ret) return ret; diff --git a/drivers/video/fbdev/vt8623fb.c b/drivers/video/fbdev/vt8623fb.c index 49b9f148d3a17..81858d02595a8 100644 --- a/drivers/video/fbdev/vt8623fb.c +++ b/drivers/video/fbdev/vt8623fb.c @@ -25,6 +25,7 @@ #include <linux/init.h> #include <linux/pci.h> #include <linux/console.h> /* Why should fb driver call console functions? because console_lock() */ +#include <video/nomodeset.h> #include <video/vga.h> struct vt8623fb_info { @@ -920,7 +921,12 @@ static int __init vt8623fb_init(void) #ifndef MODULE char *option = NULL; +#endif + + if (video_firmware_drivers_only()) + return -ENODEV; +#ifndef MODULE if (fb_get_options("vt8623fb", &option)) return -ENODEV;
Support the kernel's nomodeset parameter for all PCI-based fbdev drivers that use aperture helpers to remove other, hardware-agnostic graphics drivers. The parameter is a simple way of using the firmware-provided scanout buffer if the hardware's native driver is broken. The same effect could be achieved with per-driver options, but the importance of the graphics output for many users makes a single, unified approach worthwhile. With nomodeset specified, the fbdev driver module will not load. This unifies behavior with similar DRM drivers. In DRM helpers, modules first check the nomodeset parameter before registering the PCI driver. As fbdev has no such module helpers, we have to modify each driver individually. The name 'nomodeset' is slightly misleading, but has been chosen for historical reasons. Several drivers implemented it before it became a general option for DRM. So keeping the existing name was preferred over introducing a new one. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> --- drivers/staging/sm750fb/Kconfig | 1 + drivers/staging/sm750fb/sm750.c | 4 +++ drivers/video/fbdev/Kconfig | 37 ++++++++++++++++++++ drivers/video/fbdev/arkfb.c | 6 ++++ drivers/video/fbdev/asiliantfb.c | 5 +++ drivers/video/fbdev/aty/aty128fb.c | 6 ++++ drivers/video/fbdev/aty/atyfb_base.c | 6 ++++ drivers/video/fbdev/aty/radeon_base.c | 6 ++++ drivers/video/fbdev/carminefb.c | 5 +++ drivers/video/fbdev/chipsfb.c | 5 +++ drivers/video/fbdev/cirrusfb.c | 6 ++++ drivers/video/fbdev/cyber2000fb.c | 6 ++++ drivers/video/fbdev/geode/Kconfig | 3 ++ drivers/video/fbdev/geode/gx1fb_core.c | 7 ++++ drivers/video/fbdev/geode/gxfb_core.c | 7 ++++ drivers/video/fbdev/geode/lxfb_core.c | 7 ++++ drivers/video/fbdev/gxt4500.c | 5 +++ drivers/video/fbdev/hyperv_fb.c | 5 +++ drivers/video/fbdev/i740fb.c | 6 ++++ drivers/video/fbdev/i810/i810_main.c | 8 +++++ drivers/video/fbdev/imsttfb.c | 7 ++++ drivers/video/fbdev/intelfb/intelfbdrv.c | 5 +++ drivers/video/fbdev/kyro/fbdev.c | 6 ++++ drivers/video/fbdev/matrox/matroxfb_base.c | 5 +++ drivers/video/fbdev/mb862xx/mb862xxfbdrv.c | 5 +++ drivers/video/fbdev/neofb.c | 6 ++++ drivers/video/fbdev/nvidia/nvidia.c | 7 ++++ drivers/video/fbdev/pm2fb.c | 6 ++++ drivers/video/fbdev/pm3fb.c | 6 ++++ drivers/video/fbdev/pvr2fb.c | 7 ++++ drivers/video/fbdev/riva/fbdev.c | 7 ++++ drivers/video/fbdev/s3fb.c | 6 ++++ drivers/video/fbdev/savage/savagefb_driver.c | 5 +++ drivers/video/fbdev/sis/sis_main.c | 7 ++++ drivers/video/fbdev/skeletonfb.c | 7 ++++ drivers/video/fbdev/sm712fb.c | 5 +++ drivers/video/fbdev/sstfb.c | 4 +++ drivers/video/fbdev/sunxvr2500.c | 5 +++ drivers/video/fbdev/sunxvr500.c | 5 +++ drivers/video/fbdev/tdfxfb.c | 6 ++++ drivers/video/fbdev/tgafb.c | 6 ++++ drivers/video/fbdev/tridentfb.c | 6 ++++ drivers/video/fbdev/vermilion/vermilion.c | 7 ++++ drivers/video/fbdev/via/via-core.c | 5 +++ drivers/video/fbdev/vt8623fb.c | 6 ++++ 45 files changed, 288 insertions(+)