diff mbox series

[v2,11/12] arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes

Message ID 20221115133105.980877-12-robert.foss@linaro.org (mailing list archive)
State New, archived
Headers show
Series Enable Display for SM8350 | expand

Commit Message

Robert Foss Nov. 15, 2022, 1:31 p.m. UTC
Enable the display subsystem and the dsi0 output for
the sm8350-hdk board.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index e6deb08c6da0..39462c659c58 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -213,10 +213,32 @@  &cdsp {
 	firmware-name = "qcom/sm8350/cdsp.mbn";
 };
 
+&dispcc {
+	status = "okay";
+};
+
+&dsi0 {
+	vdda-supply = <&vreg_l6b_1p2>;
+	status = "okay";
+};
+
+&dsi0_phy  {
+	vdds-supply = <&vreg_l5b_0p88>;
+	status = "okay";
+};
+
 &gpi_dma1 {
 	status = "okay";
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
 &mpss {
 	status = "okay";
 	firmware-name = "qcom/sm8350/modem.mbn";