@@ -214,6 +214,17 @@ config DRM_PANEL_JDI_LT070ME05000
The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
24 bit per pixel.
+config DRM_PANEL_JDI_LPM102A188A
+ tristate "JDI LPM102A188A DSI panel"
+ depends on OF && GPIOLIB
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for JDI LPM102A188A DSI
+ control mode panel as found in Google Pixel C devices.
+ The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
+ to the host.
+
config DRM_PANEL_JDI_R63452
tristate "JDI R63452 Full HD DSI panel"
depends on OF
@@ -19,6 +19,7 @@ obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o
obj-$(CONFIG_DRM_PANEL_INNOLUX_EJ030NA) += panel-innolux-ej030na.o
obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
+obj-$(CONFIG_DRM_PANEL_JDI_LPM102A188A) += panel-jdi-lpm102a188a.o
obj-$(CONFIG_DRM_PANEL_JDI_R63452) += panel-jdi-fhd-r63452.o
obj-$(CONFIG_DRM_PANEL_KHADAS_TS050) += panel-khadas-ts050.o
obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o
new file mode 100644
@@ -0,0 +1,509 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Google, Inc.
+ *
+ * Copyright (C) 2022 Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
+ *
+ * Adapted from the downstream Pixel C driver written by Sean Paul
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+
+struct jdi_panel {
+ struct drm_panel base;
+ struct mipi_dsi_device *link1;
+ struct mipi_dsi_device *link2;
+
+ struct regulator *supply;
+ struct regulator *ddi_supply;
+ struct backlight_device *backlight;
+
+ struct gpio_desc *enable_gpio;
+ struct gpio_desc *reset_gpio;
+
+ const struct drm_display_mode *mode;
+
+ bool prepared;
+ bool enabled;
+};
+
+static inline struct jdi_panel *to_panel_jdi(struct drm_panel *panel)
+{
+ return container_of(panel, struct jdi_panel, base);
+}
+
+static void jdi_wait_frames(struct jdi_panel *jdi, unsigned int frames)
+{
+ unsigned int refresh = drm_mode_vrefresh(jdi->mode);
+
+ if (WARN_ON(frames > refresh))
+ return;
+
+ msleep(1000 / (refresh / frames));
+}
+
+static int jdi_panel_disable(struct drm_panel *panel)
+{
+ struct jdi_panel *jdi = to_panel_jdi(panel);
+
+ if (!jdi->enabled)
+ return 0;
+
+ backlight_disable(jdi->backlight);
+
+ jdi_wait_frames(jdi, 2);
+
+ jdi->enabled = false;
+
+ return 0;
+}
+
+static int jdi_panel_unprepare(struct drm_panel *panel)
+{
+ struct jdi_panel *jdi = to_panel_jdi(panel);
+ int ret;
+
+ if (!jdi->prepared)
+ return 0;
+
+ ret = mipi_dsi_dcs_set_display_off(jdi->link1);
+ if (ret < 0)
+ dev_err(panel->dev, "failed to set display off: %d\n", ret);
+ ret = mipi_dsi_dcs_set_display_off(jdi->link2);
+ if (ret < 0)
+ dev_err(panel->dev, "failed to set display off: %d\n", ret);
+
+ /* Specified by JDI @ 50ms, subject to change */
+ msleep(50);
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(jdi->link1);
+ if (ret < 0)
+ dev_err(panel->dev, "failed to enter sleep mode: %d\n", ret);
+ ret = mipi_dsi_dcs_enter_sleep_mode(jdi->link2);
+ if (ret < 0)
+ dev_err(panel->dev, "failed to enter sleep mode: %d\n", ret);
+
+ /* Specified by JDI @ 150ms, subject to change */
+ msleep(150);
+
+ gpiod_set_value(jdi->reset_gpio, 1);
+
+ /* T4 = 1ms */
+ usleep_range(1000, 3000);
+
+ gpiod_set_value(jdi->enable_gpio, 0);
+
+ /* T5 = 2ms */
+ usleep_range(2000, 4000);
+
+ regulator_disable(jdi->ddi_supply);
+
+ /* T6 = 2ms */
+ usleep_range(5000, 6000);
+
+ regulator_disable(jdi->supply);
+
+ jdi->prepared = false;
+
+ return 0;
+}
+
+static int jdi_setup_symmetrical_split(struct mipi_dsi_device *left,
+ struct mipi_dsi_device *right,
+ const struct drm_display_mode *mode)
+{
+ int err;
+
+ err = mipi_dsi_dcs_set_column_address(left, 0, mode->hdisplay / 2 - 1);
+ if (err < 0) {
+ dev_err(&left->dev, "failed to set column address: %d\n", err);
+ return err;
+ }
+
+ err = mipi_dsi_dcs_set_column_address(right, 0, mode->hdisplay / 2 - 1);
+ if (err < 0) {
+ dev_err(&right->dev, "failed to set column address: %d\n", err);
+ return err;
+ }
+
+ err = mipi_dsi_dcs_set_page_address(left, 0, mode->vdisplay - 1);
+ if (err < 0) {
+ dev_err(&left->dev, "failed to set page address: %d\n", err);
+ return err;
+ }
+
+ err = mipi_dsi_dcs_set_page_address(right, 0, mode->vdisplay - 1);
+ if (err < 0) {
+ dev_err(&right->dev, "failed to set page address: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static int jdi_panel_prepare(struct drm_panel *panel)
+{
+ struct jdi_panel *jdi = to_panel_jdi(panel);
+ u8 format = MIPI_DCS_PIXEL_FMT_24BIT;
+ int err;
+
+ if (jdi->prepared)
+ return 0;
+
+ /* Disable backlight to avoid showing random pixels
+ * with a conservative delay for it to take effect.
+ */
+ backlight_disable(jdi->backlight);
+ msleep(100);
+
+ jdi->link1->mode_flags |= MIPI_DSI_MODE_LPM;
+ jdi->link2->mode_flags |= MIPI_DSI_MODE_LPM;
+
+ err = regulator_enable(jdi->supply);
+ if (err < 0) {
+ dev_err(panel->dev, "failed to enable supply: %d\n", err);
+ return err;
+ }
+ /* T1 = 2ms */
+ usleep_range(2000, 4000);
+
+ err = regulator_enable(jdi->ddi_supply);
+ if (err < 0) {
+ dev_err(panel->dev, "failed to enable ddi_supply: %d\n", err);
+ return err;
+ }
+ /* T2 = 1ms */
+ usleep_range(1000, 3000);
+
+ gpiod_set_value(jdi->enable_gpio, 1);
+ /* T3 = 10ms */
+ usleep_range(10000, 15000);
+
+ gpiod_set_value(jdi->reset_gpio, 0);
+ /* Specified by JDI @ 3ms, subject to change */
+ usleep_range(3000, 5000);
+
+ /*
+ * TODO: The device supports both left-right and even-odd split
+ * configurations, but this driver currently supports only the left-
+ * right split. To support a different mode a mechanism needs to be
+ * put in place to communicate the configuration back to the DSI host
+ * controller.
+ */
+
+ err = jdi_setup_symmetrical_split(jdi->link1, jdi->link2,
+ jdi->mode);
+ if (err < 0) {
+ dev_err(panel->dev, "failed to set up symmetrical split: %d\n",
+ err);
+ goto poweroff;
+ }
+
+ err = mipi_dsi_dcs_set_tear_scanline(jdi->link1,
+ jdi->mode->vdisplay - 16);
+ if (err < 0)
+ dev_err(panel->dev, "failed to set tear scanline: %d\n", err);
+
+ err = mipi_dsi_dcs_set_tear_scanline(jdi->link2,
+ jdi->mode->vdisplay - 16);
+ if (err < 0)
+ dev_err(panel->dev, "failed to set tear scanline: %d\n", err);
+
+ err = mipi_dsi_dcs_set_tear_on(jdi->link1,
+ MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+ if (err < 0)
+ dev_err(panel->dev, "failed to set tear on: %d\n", err);
+
+ err = mipi_dsi_dcs_set_tear_on(jdi->link2,
+ MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+ if (err < 0)
+ dev_err(panel->dev, "failed to set tear on: %d\n", err);
+
+ err = mipi_dsi_dcs_set_pixel_format(jdi->link1, format);
+ if (err < 0) {
+ dev_err(panel->dev, "failed to set pixel format: %d\n", err);
+ goto poweroff;
+ }
+
+ err = mipi_dsi_dcs_set_pixel_format(jdi->link2, format);
+ if (err < 0) {
+ dev_err(panel->dev, "failed to set pixel format: %d\n", err);
+ goto poweroff;
+ }
+
+ err = mipi_dsi_dcs_exit_sleep_mode(jdi->link1);
+ if (err < 0) {
+ dev_err(panel->dev, "failed to exit sleep mode: %d\n", err);
+ goto poweroff;
+ }
+
+ err = mipi_dsi_dcs_exit_sleep_mode(jdi->link2);
+ if (err < 0) {
+ dev_err(panel->dev, "failed to exit sleep mode: %d\n", err);
+ goto poweroff;
+ }
+
+ /*
+ * We need to wait 150ms between mipi_dsi_dcs_exit_sleep_mode() and
+ * mipi_dsi_dcs_set_display_on().
+ */
+ msleep(150);
+
+ err = mipi_dsi_dcs_set_display_on(jdi->link1);
+ if (err < 0)
+ dev_err(panel->dev, "failed to set display on: %d\n", err);
+
+
+ err = mipi_dsi_dcs_set_display_on(jdi->link2);
+ if (err < 0)
+ dev_err(panel->dev, "failed to set display on: %d\n", err);
+
+ jdi->prepared = true;
+
+ jdi->link1->mode_flags &= ~MIPI_DSI_MODE_LPM;
+ jdi->link2->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+ return 0;
+
+poweroff:
+ regulator_disable(jdi->ddi_supply);
+
+ /* T6 = 2ms */
+ usleep_range(7000, 9000);
+
+ regulator_disable(jdi->supply);
+
+ return err;
+}
+
+static int jdi_panel_enable(struct drm_panel *panel)
+{
+ struct jdi_panel *jdi = to_panel_jdi(panel);
+
+ if (jdi->enabled)
+ return 0;
+
+ /*
+ * Ensure we send image data before turning the backlight on,
+ * to avoid the display showing random pixels (colored snow).
+ */
+ jdi_wait_frames(jdi, 3);
+
+ backlight_enable(jdi->backlight);
+
+ jdi->enabled = true;
+
+ return 0;
+}
+
+static const struct drm_display_mode default_mode = {
+ .clock = 304417,
+ .hdisplay = 2560,
+ .hsync_start = 2560 + 80,
+ .hsync_end = 2560 + 80 + 80,
+ .htotal = 2560 + 80 + 80 + 80,
+ .vdisplay = 1800,
+ .vsync_start = 1800 + 4,
+ .vsync_end = 1800 + 4 + 4,
+ .vtotal = 1800 + 4 + 4 + 4,
+ .flags = 0,
+};
+
+static int jdi_panel_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct drm_display_mode *mode;
+ struct jdi_panel *jdi = to_panel_jdi(panel);
+ struct device *dev = &jdi->link1->dev;
+
+ mode = drm_mode_duplicate(connector->dev, &default_mode);
+ if (!mode) {
+ dev_err(dev, "failed to add mode %ux%ux@%u\n",
+ default_mode.hdisplay, default_mode.vdisplay,
+ drm_mode_vrefresh(&default_mode));
+ return -ENOMEM;
+ }
+
+ drm_mode_set_name(mode);
+
+ drm_mode_probed_add(connector, mode);
+
+ connector->display_info.width_mm = 211;
+ connector->display_info.height_mm = 148;
+ connector->display_info.bpc = 8;
+
+ return 1;
+}
+
+static const struct drm_panel_funcs jdi_panel_funcs = {
+ .prepare = jdi_panel_prepare,
+ .enable = jdi_panel_enable,
+ .disable = jdi_panel_disable,
+ .unprepare = jdi_panel_unprepare,
+ .get_modes = jdi_panel_get_modes,
+};
+
+static const struct of_device_id jdi_of_match[] = {
+ { .compatible = "jdi,lpm102a188a", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, jdi_of_match);
+
+static int jdi_panel_add(struct jdi_panel *jdi)
+{
+ struct device *dev = &jdi->link1->dev;
+
+ jdi->mode = &default_mode;
+
+ jdi->supply = devm_regulator_get(dev, "power");
+ if (IS_ERR(jdi->supply))
+ return dev_err_probe(dev, PTR_ERR(jdi->supply),
+ "failed to get power regulator\n");
+
+ jdi->ddi_supply = devm_regulator_get(dev, "ddi");
+ if (IS_ERR(jdi->ddi_supply))
+ return dev_err_probe(dev, PTR_ERR(jdi->ddi_supply),
+ "failed to get ddi regulator\n");
+
+ jdi->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(jdi->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(jdi->reset_gpio),
+ "failed to get reset gpio\n");
+ usleep_range(1000, 3000);
+
+ jdi->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(jdi->enable_gpio))
+ return dev_err_probe(dev, PTR_ERR(jdi->enable_gpio),
+ "failed to get enable gpio\n");
+ usleep_range(2000, 4000);
+
+ jdi->backlight = devm_of_find_backlight(dev);
+ if (IS_ERR(jdi->backlight))
+ return dev_err_probe(dev, PTR_ERR(jdi->backlight),
+ "failed to create backlight\n");
+
+ drm_panel_init(&jdi->base, &jdi->link1->dev, &jdi_panel_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+
+ drm_panel_add(&jdi->base);
+
+ return 0;
+}
+
+static void jdi_panel_del(struct jdi_panel *jdi)
+{
+ if (jdi->base.dev)
+ drm_panel_remove(&jdi->base);
+
+ if (jdi->link2)
+ put_device(&jdi->link2->dev);
+}
+
+static int jdi_panel_dsi_probe(struct mipi_dsi_device *dsi)
+{
+ struct mipi_dsi_device *secondary = NULL;
+ struct jdi_panel *jdi;
+ struct device_node *np;
+ int err;
+
+ dsi->lanes = 4;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = 0;
+
+ /* Find DSI-LINK1 */
+ np = of_parse_phandle(dsi->dev.of_node, "link2", 0);
+ if (np) {
+ secondary = of_find_mipi_dsi_device_by_node(np);
+ of_node_put(np);
+
+ if (!secondary)
+ return -EPROBE_DEFER;
+ }
+
+ /* register a panel for only the DSI-LINK1 interface */
+ if (secondary) {
+ jdi = devm_kzalloc(&dsi->dev, sizeof(*jdi), GFP_KERNEL);
+ if (!jdi) {
+ put_device(&secondary->dev);
+ return -ENOMEM;
+ }
+
+ mipi_dsi_set_drvdata(dsi, jdi);
+
+ jdi->link1 = dsi;
+ jdi->link2 = secondary;
+
+ err = jdi_panel_add(jdi);
+ if (err < 0) {
+ put_device(&secondary->dev);
+ return err;
+ }
+ }
+
+ err = mipi_dsi_attach(dsi);
+ if (err < 0) {
+ if (secondary)
+ jdi_panel_del(jdi);
+
+ return err;
+ }
+
+ return 0;
+}
+
+static void jdi_panel_dsi_remove(struct mipi_dsi_device *dsi)
+{
+ struct jdi_panel *jdi = mipi_dsi_get_drvdata(dsi);
+ int err;
+
+ /* only detach from host for the DSI-LINK2 interface */
+ if (!jdi)
+ mipi_dsi_detach(dsi);
+
+ err = jdi_panel_disable(&jdi->base);
+ if (err < 0)
+ dev_err(&dsi->dev, "failed to disable panel: %d\n", err);
+
+ err = mipi_dsi_detach(dsi);
+ if (err < 0)
+ dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err);
+
+ jdi_panel_del(jdi);
+}
+
+static void jdi_panel_dsi_shutdown(struct mipi_dsi_device *dsi)
+{
+ struct jdi_panel *jdi = mipi_dsi_get_drvdata(dsi);
+
+ if (!jdi)
+ return;
+
+ jdi_panel_disable(&jdi->base);
+}
+
+static struct mipi_dsi_driver jdi_panel_dsi_driver = {
+ .driver = {
+ .name = "panel-jdi-lpm102a188a-dsi",
+ .of_match_table = jdi_of_match,
+ },
+ .probe = jdi_panel_dsi_probe,
+ .remove = jdi_panel_dsi_remove,
+ .shutdown = jdi_panel_dsi_shutdown,
+};
+module_mipi_dsi_driver(jdi_panel_dsi_driver);
+
+MODULE_AUTHOR("Sean Paul <seanpaul@chromium.org>");
+MODULE_AUTHOR("Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>");
+MODULE_DESCRIPTION("DRM Driver for JDI LPM102A188A DSI panel, command mode");
+MODULE_LICENSE("GPL");
The JDI LPM102A188A is a 2560x1800 IPS panel found in the Google Pixel C. This driver is based on the downstream GPLv2 driver released by Google written by Sean Paul [1], which was then adapted to the newer kernel APIs. [1]: https://android.googlesource.com/kernel/tegra/+/refs/heads/android-tegra-dragon-3.18-oreo/drivers/gpu/drm/panel/panel-jdi-lpm102a188a.c Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> --- Changes in v2: - tuned backlight delays drivers/gpu/drm/panel/Kconfig | 11 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-jdi-lpm102a188a.c | 509 ++++++++++++++++++ 3 files changed, 521 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-jdi-lpm102a188a.c