[10/12] arm64: dts: qcom: sm6115: Add i2c/spi nodes

Message ID	20221129204616.47006-11-a39.skl@gmail.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <dri-devel-bounces@lists.freedesktop.org> From: Adam Skladowski <a39.skl@gmail.com> To: Subject: [PATCH 10/12] arm64: dts: qcom: sm6115: Add i2c/spi nodes Date: Tue, 29 Nov 2022 21:46:14 +0100 Message-Id: <20221129204616.47006-11-a39.skl@gmail.com> In-Reply-To: <20221129204616.47006-1-a39.skl@gmail.com> References: <20221129204616.47006-1-a39.skl@gmail.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: list Cc: "Rafael J. Wysocki" <rafael@kernel.org>, Amit Kucheria <amitk@kernel.org>, dri-devel@lists.freedesktop.org, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, phone-devel@vger.kernel.org, Daniel Lezcano <daniel.lezcano@linaro.org>, Andy Gross <agross@kernel.org>, Zhang Rui <rui.zhang@intel.com>, devicetree@vger.kernel.org, Thara Gopinath <thara.gopinath@gmail.com>, linux-pm@vger.kernel.org, linux-arm-msm@vger.kernel.org, Adam Skladowski <a39.skl@gmail.com>, Abhinav Kumar <quic_abhinavk@quicinc.com>, Rob Herring <robh+dt@kernel.org>, ~postmarketos/upstreaming@lists.sr.ht, Sean Paul <sean@poorly.run>, Loic Poulain <loic.poulain@linaro.org>, Bjorn Andersson <andersson@kernel.org>, linux-kernel@vger.kernel.org, Konrad Dybcio <konrad.dybcio@linaro.org>, Dmitry Baryshkov <dmitry.baryshkov@linaro.org>, freedreno@lists.freedesktop.org Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" <dri-devel-bounces@lists.freedesktop.org>
Series	SM6115 DTS changes \| expand [00/12] SM6115 DTS changes [01/12] dt-bindings: display: msm: Replace mdss with display-subsystem [02/12] dt-bindings: thermal: tsens: Add SM6115 compatible [03/12] arm64: dts: qcom: sm6115: Add cpufreq-hw support [04/12] arm64: dts: qcom: sm6115: Add TSENS node [05/12] arm64: dts: qcom: sm6115: Add PRNG node [06/12] arm64: dts: qcom: sm6115: Add rpm-stats node [07/12] arm64: dts: qcom: sm6115: Add dispcc node [08/12] arm64: dts: qcom: sm6115: Add mdss/dpu node [09/12] arm64: dts: qcom: sm6115: Add GPI DMA [10/12] arm64: dts: qcom: sm6115: Add i2c/spi nodes [11/12] arm64: dts: qcom: sm6115: Add WCN node. [12/12] arm64: dts: qcom: sm6115: Fallback smmu to qcom generic compatible

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index e9de7aa1efdd..d14a4595be8a 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/clock/qcom,gcc-sm6115.h> #include <dt-bindings/clock/qcom,sm6115-dispcc.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -357,6 +358,90 @@ tlmm: pinctrl@500000 { interrupt-controller; #interrupt-cells = <2>; + qup_i2c0_default: qup-i2c0-default { + pins = "gpio0", "gpio1"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c1_default: qup-i2c1-default { + pins = "gpio4", "gpio5"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_default: qup-i2c2-default { + pins = "gpio6", "gpio7"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c3_default: qup-i2c3-default { + pins = "gpio8", "gpio9"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c4_default: qup-i2c4-default { + pins = "gpio12", "gpio13"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_default: qup-i2c5-default { + pins = "gpio14", "gpio15"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_default: qup-spi0-default { + pins = "gpio0", "gpio1","gpio2", "gpio3"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi1_default: qup-spi1-default { + pins = "gpio4", "gpio5", "gpio69", "gpio70"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi2_default: qup-spi2-default { + pins = "gpio6", "gpio7", "gpio71", "gpio80"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi3_default: qup-spi3-default { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi4_default: qup-spi4-default { + pins = "gpio12", "gpio13", "gpio96", "gpio97"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi5_default: qup-spi5-default { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + sdc1_state_on: sdc1-on-state { clk-pins { pins = "sdc1_clk"; @@ -693,6 +778,208 @@ gpi_dma0: dma-controller@4a00000 { status = "disabled"; }; + qupv3_id_0: geniqup@4ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x04ac0000 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <1>; + #size-cells = <1>; + iommus = <&apps_smmu 0xe3 0x0>; + ranges; + status = "disabled"; + + i2c0: i2c@4a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x04a80000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@4a80000 { + compatible = "qcom,geni-spi"; + reg = <0x04a80000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@4a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x04a84000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@4a84000 { + compatible = "qcom,geni-spi"; + reg = <0x04a84000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_default>; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@4a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x04a88000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@4a88000 { + compatible = "qcom,geni-spi"; + reg = <0x04a88000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_default>; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@4a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x04a8c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_default>; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@4a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x04a8c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_default>; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@4a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x04a90000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@4a90000 { + compatible = "qcom,geni-spi"; + reg = <0x04a90000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_default>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@4a94000 { + compatible = "qcom,geni-i2c"; + reg = <0x04a94000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@4a94000 { + compatible = "qcom,geni-spi"; + reg = <0x04a94000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_default>; + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + usb_1: usb@4ef8800 { compatible = "qcom,sm6115-dwc3", "qcom,dwc3"; reg = <0x04ef8800 0x400>;

[10/12] arm64: dts: qcom: sm6115: Add i2c/spi nodes

Commit Message

Comments

Patch