From patchwork Tue Nov 29 20:46:14 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Adam Skladowski X-Patchwork-Id: 13059187 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id BDFB0C4708B for ; Tue, 29 Nov 2022 20:47:32 +0000 (UTC) Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 5821410E3DB; Tue, 29 Nov 2022 20:47:26 +0000 (UTC) Received: from mail-lf1-x135.google.com (mail-lf1-x135.google.com [IPv6:2a00:1450:4864:20::135]) by gabe.freedesktop.org (Postfix) with ESMTPS id 534BD10E3E1; Tue, 29 Nov 2022 20:47:16 +0000 (UTC) Received: by mail-lf1-x135.google.com with SMTP id be13so23903707lfb.4; Tue, 29 Nov 2022 12:47:16 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=1Ma9RUQu1JjVVoYty/WmEXDnYuOfQCd9ANuJ3pmUfPM=; b=T/qBBnIruUH/GUG83CcB0NngH2JXSmSIG9cGLShPtFZWw6A4daVJUvP6xwkdgAaFQW MGvObW7ShX2GrYtOjmizAfsy0e0PCGnYrb2D9M3OZ3dGGNnCM4wSQi3G1Adhteesiyvt BWfmhrLjUDB+LLFiRrgcXMksdn2nrX6rwVhuaYUWRubAHBu0FAhONOelr2nAsxzEzVVE xuFF7N/TdqngKU7p5vmUhzd7CEVprhegjCVeT16r9T1HabdsApxZicqPvon1Jxtam2pq PBJkp6LHq5tIzkAdJkq4zq/+nWn4icmNYzOVmrP1F82YW6mYhj8QVYVHRVbgQCdXneLL Wscg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=1Ma9RUQu1JjVVoYty/WmEXDnYuOfQCd9ANuJ3pmUfPM=; b=1ZZ++9v+FxEkviDXNPjYf40X7i+v60RIkx+2n5w12SqNsqKaBqw3a/V7ndjTYS7gad NAwZnq/o1ZuTPvlpHdZxvQ9/jaLgPGlzJGu73gHjkbiHplAKt2lbBX7EgnvwKSNN9cuo EYPBSMdWfUEMsFH80xUTIAR9g29gepHBaaprmpjAvcFZk93bKF0jqasaSwWCA3OemKLy 0cKpLWdv0EdDAmM0Xo001a/dlqJV4Ez5P1d+nOxGNgI78A6qHcUsZQpHbkjZYmMrhSoB v0P2VOIFYaMN22xp94k9nqLYny3e9WL6GzE2/O6ijqfk6JWesd2pO4/Q0wE5arUSv8nj J23g== X-Gm-Message-State: ANoB5pl9anIZyk9wEqFRUq7PNJQTE6X6D8j7pevP4CqIx1+Xel3eBIof eSiDSOeFaaIA57s2uso38kk= X-Google-Smtp-Source: AA0mqf4vieHe53nkDLyouG86tJoxjWakBPNUKhkxYRv0lFIj9pr6eplRQSRLVtOwCbUFwy+SymcKLA== X-Received: by 2002:a19:5211:0:b0:4b5:1e6f:c9d3 with SMTP id m17-20020a195211000000b004b51e6fc9d3mr2074160lfb.659.1669754834500; Tue, 29 Nov 2022 12:47:14 -0800 (PST) Received: from localhost.localdomain (ccy110.neoplus.adsl.tpnet.pl. [83.30.148.110]) by smtp.gmail.com with ESMTPSA id o11-20020ac24e8b000000b004ae24368195sm2325620lfr.233.2022.11.29.12.47.12 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 29 Nov 2022 12:47:14 -0800 (PST) From: Adam Skladowski To: Subject: [PATCH 10/12] arm64: dts: qcom: sm6115: Add i2c/spi nodes Date: Tue, 29 Nov 2022 21:46:14 +0100 Message-Id: <20221129204616.47006-11-a39.skl@gmail.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221129204616.47006-1-a39.skl@gmail.com> References: <20221129204616.47006-1-a39.skl@gmail.com> MIME-Version: 1.0 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: "Rafael J. Wysocki" , Amit Kucheria , dri-devel@lists.freedesktop.org, Krzysztof Kozlowski , phone-devel@vger.kernel.org, Daniel Lezcano , Andy Gross , Zhang Rui , devicetree@vger.kernel.org, Thara Gopinath , linux-pm@vger.kernel.org, linux-arm-msm@vger.kernel.org, Adam Skladowski , Abhinav Kumar , Rob Herring , ~postmarketos/upstreaming@lists.sr.ht, Sean Paul , Loic Poulain , Bjorn Andersson , linux-kernel@vger.kernel.org, Konrad Dybcio , Dmitry Baryshkov , freedreno@lists.freedesktop.org Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" Add I2C/SPI nodes for SM6115. Signed-off-by: Adam Skladowski --- arch/arm64/boot/dts/qcom/sm6115.dtsi | 287 +++++++++++++++++++++++++++ 1 file changed, 287 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index e9de7aa1efdd..d14a4595be8a 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -6,6 +6,7 @@ #include #include #include +#include #include #include #include @@ -357,6 +358,90 @@ tlmm: pinctrl@500000 { interrupt-controller; #interrupt-cells = <2>; + qup_i2c0_default: qup-i2c0-default { + pins = "gpio0", "gpio1"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c1_default: qup-i2c1-default { + pins = "gpio4", "gpio5"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_default: qup-i2c2-default { + pins = "gpio6", "gpio7"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c3_default: qup-i2c3-default { + pins = "gpio8", "gpio9"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c4_default: qup-i2c4-default { + pins = "gpio12", "gpio13"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_default: qup-i2c5-default { + pins = "gpio14", "gpio15"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_default: qup-spi0-default { + pins = "gpio0", "gpio1","gpio2", "gpio3"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi1_default: qup-spi1-default { + pins = "gpio4", "gpio5", "gpio69", "gpio70"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi2_default: qup-spi2-default { + pins = "gpio6", "gpio7", "gpio71", "gpio80"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi3_default: qup-spi3-default { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi4_default: qup-spi4-default { + pins = "gpio12", "gpio13", "gpio96", "gpio97"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi5_default: qup-spi5-default { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + sdc1_state_on: sdc1-on-state { clk-pins { pins = "sdc1_clk"; @@ -693,6 +778,208 @@ gpi_dma0: dma-controller@4a00000 { status = "disabled"; }; + qupv3_id_0: geniqup@4ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x04ac0000 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <1>; + #size-cells = <1>; + iommus = <&apps_smmu 0xe3 0x0>; + ranges; + status = "disabled"; + + i2c0: i2c@4a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x04a80000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = ; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@4a80000 { + compatible = "qcom,geni-spi"; + reg = <0x04a80000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@4a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x04a84000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = ; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@4a84000 { + compatible = "qcom,geni-spi"; + reg = <0x04a84000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_default>; + interrupts = ; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@4a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x04a88000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = ; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@4a88000 { + compatible = "qcom,geni-spi"; + reg = <0x04a88000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_default>; + interrupts = ; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@4a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x04a8c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_default>; + interrupts = ; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@4a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x04a8c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_default>; + interrupts = ; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@4a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x04a90000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = ; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@4a90000 { + compatible = "qcom,geni-spi"; + reg = <0x04a90000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_default>; + interrupts = ; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@4a94000 { + compatible = "qcom,geni-i2c"; + reg = <0x04a94000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = ; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@4a94000 { + compatible = "qcom,geni-spi"; + reg = <0x04a94000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_default>; + interrupts = ; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + usb_1: usb@4ef8800 { compatible = "qcom,sm6115-dwc3", "qcom,dwc3"; reg = <0x04ef8800 0x400>;