| Message ID | 20230109084101.265664-6-treapking@chromium.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Register Type-C mode-switch in DP bridge endpoints | expand |
On Mon, Jan 9, 2023 at 4:41 PM Pin-yen Lin <treapking@chromium.org> wrote: > > The output port endpoints can be connected to USB-C connectors. > Running drm_of_find_panel_or_bridge() with such endpoints leads to > a continuous return value of -EPROBE_DEFER, even though there is > no panel present. > > To avoid this, check for the existence of a "mode-switch" property in > the port endpoint, and skip panel registration completely if so. > > Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Chen-Yu Tsai <wenst@chromium.org> on MT8192 based Hayato (ASUS Chromebook Flip CM3200).
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c index b375887e655d..1cf242130b91 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.c +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c @@ -1649,7 +1649,7 @@ static int anx7625_get_swing_setting(struct device *dev, static int anx7625_parse_dt(struct device *dev, struct anx7625_platform_data *pdata) { - struct device_node *np = dev->of_node, *ep0; + struct device_node *np = dev->of_node, *ep0, *sw; int bus_type, mipi_lanes; anx7625_get_swing_setting(dev, pdata); @@ -1688,6 +1688,17 @@ static int anx7625_parse_dt(struct device *dev, if (of_property_read_bool(np, "analogix,audio-enable")) pdata->audio_en = 1; + /* + * Don't bother finding a panel if a Type-C `mode-switch` property is + * present in one of the endpoints. + */ + for_each_endpoint_of_node(np, sw) { + if (of_property_read_bool(sw, "mode-switch")) { + of_node_put(sw); + return 0; + } + } + pdata->panel_bridge = devm_drm_of_get_bridge(dev, np, 1, 0); if (IS_ERR(pdata->panel_bridge)) { if (PTR_ERR(pdata->panel_bridge) == -ENODEV) {
The output port endpoints can be connected to USB-C connectors. Running drm_of_find_panel_or_bridge() with such endpoints leads to a continuous return value of -EPROBE_DEFER, even though there is no panel present. To avoid this, check for the existence of a "mode-switch" property in the port endpoint, and skip panel registration completely if so. Signed-off-by: Pin-yen Lin <treapking@chromium.org> --- (no changes since v6) Changes in v6: - New in v6 drivers/gpu/drm/bridge/analogix/anx7625.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)