@@ -77,20 +77,43 @@ properties:
unevaluatedProperties: false
description: Video port for DP output
- properties:
- endpoint:
+ patternProperties:
+ "^endpoint@[01]$":
$ref: /schemas/graph.yaml#/$defs/endpoint-base
unevaluatedProperties: false
properties:
+ reg:
+ maxItems: 1
+
+ remote-endpoint: true
+
data-lanes:
- minItems: 1
- uniqueItems: true
- items:
- - enum: [ 0, 1 ]
- - const: 1
- - const: 2
- - const: 3
+ oneOf:
+ - items:
+ - enum: [0, 1, 2, 3]
+
+ - items:
+ - const: 0
+ - const: 1
+
+ - items:
+ - const: 2
+ - const: 3
+
+ - items:
+ - const: 0
+ - const: 1
+ - const: 2
+ - const: 3
+
+ mode-switch:
+ type: boolean
+ description: Register this node as a Type-C mode switch or not.
+
+ required:
+ - reg
+ - remote-endpoint
required:
- port@0
@@ -102,7 +125,6 @@ required:
- pwr18-supply
- interrupts
- reset-gpios
- - extcon
- ports
additionalProperties: false
@@ -139,8 +161,11 @@ examples:
};
port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <1>;
- it6505_out: endpoint {
+ it6505_out: endpoint@0 {
+ reg = <0>;
remote-endpoint = <&dp_in>;
data-lanes = <0 1>;
};
@@ -148,3 +173,49 @@ examples:
};
};
};
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dp-bridge@5c {
+ compatible = "ite,it6505";
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW 8 0>;
+ reg = <0x5c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&it6505_pins>;
+ ovdd-supply = <&mt6366_vsim2_reg>;
+ pwr18-supply = <&pp1800_dpbrdg_dx>;
+ reset-gpios = <&pio 177 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ it6505_dpi_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ ite_typec0: endpoint@0 {
+ reg = <0>;
+ mode-switch;
+ data-lanes = <0 1>;
+ remote-endpoint = <&typec_port0>;
+ };
+ ite_typec1: endpoint@1 {
+ reg = <1>;
+ mode-switch;
+ data-lanes = <2 3>;
+ remote-endpoint = <&typec_port1>;
+ };
+ };
+ };
+ };
+ };
ITE IT6505 can be used in systems to switch the DP traffic between two downstreams, which can be USB Type-C DisplayPort alternate mode lane or regular DisplayPort output ports. Update the binding to accommodate this usage by introducing a data-lanes and a mode-switch property on endpoints. Signed-off-by: Pin-yen Lin <treapking@chromium.org> --- Changes in v9: - Fixed subject prefix again - Changed the naming of the example node for it6505 Changes in v8: - Updated bindings for data-lanes property - Fixed subject prefix Changes in v7: - Fixed issues reported by dt_binding_check. - Updated the schema and the example dts for data-lanes. - Changed to generic naming for the example dts node. Changes in v6: - Remove switches node and use endpoints and data-lanes property to describe the connections. .../bindings/display/bridge/ite,it6505.yaml | 93 ++++++++++++++++--- 1 file changed, 82 insertions(+), 11 deletions(-)