@@ -56,17 +56,17 @@ MODULE_PARM_DESC(debug, "Enable debug output, where each bit enables a debug cat
module_param_named(debug, __drm_debug, ulong, 0600);
#else
/* classnames must match vals of enum drm_debug_category */
-DYNDBG_CLASSMAP_DEFINE(drm_debug_classes, DD_CLASS_TYPE_DISJOINT_BITS, 0,
- "DRM_UT_CORE",
- "DRM_UT_DRIVER",
- "DRM_UT_KMS",
- "DRM_UT_PRIME",
- "DRM_UT_ATOMIC",
- "DRM_UT_VBL",
- "DRM_UT_STATE",
- "DRM_UT_LEASE",
- "DRM_UT_DP",
- "DRM_UT_DRMRES");
+DYNDBG_CLASSMAP_DEFINE(drm_debug_classes, DD_CLASS_TYPE_DISJOINT_BITS,
+ DRM_UT_CORE,
+ DRM_UT_DRIVER,
+ DRM_UT_KMS,
+ DRM_UT_PRIME,
+ DRM_UT_ATOMIC,
+ DRM_UT_VBL,
+ DRM_UT_STATE,
+ DRM_UT_LEASE,
+ DRM_UT_DP,
+ DRM_UT_DRMRES);
static struct ddebug_class_param drm_debug_bitmap = {
.bits = &__drm_debug,
@@ -333,6 +333,7 @@ static inline bool drm_debug_enabled_raw(enum drm_debug_category category)
})
#if defined(CONFIG_DRM_USE_DYNAMIC_DEBUG)
+//extern struct ddebug_class_map drm_debug_classes[];
/*
* the drm.debug API uses dyndbg, so each drm_*dbg macro/callsite gets
* a descriptor, and only enabled callsites are reachable. They use
@@ -7,6 +7,7 @@
#endif
#include <linux/build_bug.h>
+#include <linux/map.h>
/*
* An instance of this structure is created in a special
@@ -90,18 +91,16 @@ struct ddebug_class_map {
};
/**
- * DYNDBG_CLASSMAP_DEFINE - define debug-classes used by a module.
- * @_var: name of the classmap, exported for other modules coordinated use.
- * @_type: enum class_map_type, chooses bits/verbose, numeric/symbolic
- * @_base: offset of 1st class-name. splits .class_id space
- * @classes: enum-map - symbol names are "classnames", vals are .class_ids
+ * DYNDBG_CLASSMAP_DEFINE - define the debug classes used in this module.
+ * This tells dyndbg what debug classes it should control for the client.
*
- * @classes vals are _ddebug.class_ids used in the module, the symbol
- * names are stringified; they authorize "class FOO" to >control.
- * Connection to a kernel-param is done separately.
+ * @_var: struct ddebug_class_map, as passed to module_param_cb
+ * @_type: enum ddebug_class_map_type, chooses bits/verbose, numeric/symbolic
+ * @classes: enum class values used in module, such as: DRM_UT_*
*/
#define DYNDBG_CLASSMAP_DEFINE(_var, _maptype, _base, ...) \
- const char *_var##_classnames[] = { __VA_ARGS__ }; \
+ const char *_var##_classnames[] = { \
+ iMAP_LIST(__stringify, _base, __VA_ARGS__) }; \
struct ddebug_class_map __aligned(8) __used \
__section("__dyndbg_classes") _var = { \
.mod = THIS_MODULE, \
new file mode 100644
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Created by William Swanson in 2012.
+ *
+ * I, William Swanson, dedicate this work to the public domain.
+ * I waive all rights to the work worldwide under copyright law,
+ * including all related and neighboring rights,
+ * to the extent allowed by law.
+ *
+ * You can copy, modify, distribute and perform the work,
+ * even for commercial purposes, all without asking permission.
+ */
+
+#ifndef MAP_H_INCLUDED
+#define MAP_H_INCLUDED
+
+#define iEVAL0(...) __VA_ARGS__
+#define iEVAL1(...) iEVAL0(iEVAL0(iEVAL0(__VA_ARGS__)))
+#define iEVAL2(...) iEVAL1(iEVAL1(iEVAL1(__VA_ARGS__)))
+#define iEVAL3(...) iEVAL2(iEVAL2(iEVAL2(__VA_ARGS__)))
+#define iEVAL4(...) iEVAL3(iEVAL3(iEVAL3(__VA_ARGS__)))
+#define iEVAL(...) iEVAL4(iEVAL4(iEVAL4(__VA_ARGS__)))
+
+#define iMAP_END(...)
+#define iMAP_OUT
+#define iMAP_COMMA ,
+
+#define iMAP_GET_END2() 0, iMAP_END
+#define iMAP_GET_END1(...) iMAP_GET_END2
+#define iMAP_GET_END(...) iMAP_GET_END1
+#define iMAP_NEXT0(test, next, ...) next iMAP_OUT
+#define iMAP_NEXT1(test, next) iMAP_NEXT0(test, next, 0)
+#define iMAP_NEXT(test, next) iMAP_NEXT1(iMAP_GET_END test, next)
+
+#define iMAP0(f, x, peek, ...) f(x) iMAP_NEXT(peek, iMAP1)(f, peek, __VA_ARGS__)
+#define iMAP1(f, x, peek, ...) f(x) iMAP_NEXT(peek, iMAP0)(f, peek, __VA_ARGS__)
+
+#define iMAP_LIST_NEXT1(test, next) iMAP_NEXT0(test, iMAP_COMMA next, 0)
+#define iMAP_LIST_NEXT(test, next) iMAP_LIST_NEXT1(iMAP_GET_END test, next)
+
+#define iMAP_LIST0(f, x, peek, ...) f(x) iMAP_LIST_NEXT(peek, iMAP_LIST1)(f, peek, __VA_ARGS__)
+#define iMAP_LIST1(f, x, peek, ...) f(x) iMAP_LIST_NEXT(peek, iMAP_LIST0)(f, peek, __VA_ARGS__)
+
+/**
+ * Applies the function macro `f` to each of the remaining parameters.
+ */
+#define iMAP(f, ...) iEVAL(iMAP1(f, __VA_ARGS__, ()()(), ()()(), ()()(), 0))
+
+/**
+ * Applies the function macro `f` to each of the remaining parameters and
+ * inserts commas between the results.
+ */
+#define iMAP_LIST(f, ...) iEVAL(iMAP_LIST1(f, __VA_ARGS__, ()()(), ()()(), ()()(), 0))
+
+#endif
@@ -33,11 +33,10 @@ module_param_cb(do_prints, ¶m_ops_do_prints, NULL, 0600);
/*
* Using the CLASSMAP api:
- * - classmaps must have corresponding enum
- * - enum symbols must match/correlate with class-name strings in the map.
- * - base must equal enum's 1st value
- * - multiple maps must set their base to share the 0-30 class_id space !!
- * (build-bug-on tips welcome)
+ * - class-names are enum consts/symbols, like DRM_UT_CORE, DRM_UT_KMS, etc
+ * - those names are accepted at >control interface
+ * - multiple class-maps must share the per-module: 0-62 class_id space
+ * (by setting initial enum values to non-overlapping subranges)
* Additionally, here:
* - tie together sysname, mapname, bitsname, flagsname
*/
@@ -62,38 +61,38 @@ enum cat_disjoint_bits {
D2_LEASE,
D2_DP,
D2_DRMRES };
-DYNDBG_CLASSMAP_DEFINE(map_disjoint_bits, DD_CLASS_TYPE_DISJOINT_BITS, 0,
- "D2_CORE",
- "D2_DRIVER",
- "D2_KMS",
- "D2_PRIME",
- "D2_ATOMIC",
- "D2_VBL",
- "D2_STATE",
- "D2_LEASE",
- "D2_DP",
- "D2_DRMRES");
+DYNDBG_CLASSMAP_DEFINE(map_disjoint_bits, DD_CLASS_TYPE_DISJOINT_BITS,
+ D2_CORE,
+ D2_DRIVER,
+ D2_KMS,
+ D2_PRIME,
+ D2_ATOMIC,
+ D2_VBL,
+ D2_STATE,
+ D2_LEASE,
+ D2_DP,
+ D2_DRMRES);
DD_SYS_WRAP(disjoint_bits, p);
DD_SYS_WRAP(disjoint_bits, T);
/* symbolic input, independent bits */
enum cat_disjoint_names { LOW = 10, MID, HI };
-DYNDBG_CLASSMAP_DEFINE(map_disjoint_names, DD_CLASS_TYPE_DISJOINT_NAMES, 10,
- "LOW", "MID", "HI");
+DYNDBG_CLASSMAP_DEFINE(map_disjoint_names, DD_CLASS_TYPE_DISJOINT_NAMES,
+ LOW, MID, HI);
DD_SYS_WRAP(disjoint_names, p);
DD_SYS_WRAP(disjoint_names, T);
/* numeric verbosity, V2 > V1 related */
enum cat_level_num { V0 = 14, V1, V2, V3, V4, V5, V6, V7 };
-DYNDBG_CLASSMAP_DEFINE(map_level_num, DD_CLASS_TYPE_LEVEL_NUM, 14,
- "V0", "V1", "V2", "V3", "V4", "V5", "V6", "V7");
+DYNDBG_CLASSMAP_DEFINE(map_level_num, DD_CLASS_TYPE_LEVEL_NUM,
+ V0, V1, V2, V3, V4, V5, V6, V7);
DD_SYS_WRAP(level_num, p);
DD_SYS_WRAP(level_num, T);
/* symbolic verbosity */
enum cat_level_names { L0 = 22, L1, L2, L3, L4, L5, L6, L7 };
-DYNDBG_CLASSMAP_DEFINE(map_level_names, DD_CLASS_TYPE_LEVEL_NAMES, 22,
- "L0", "L1", "L2", "L3", "L4", "L5", "L6", "L7");
+DYNDBG_CLASSMAP_DEFINE(map_level_names, DD_CLASS_TYPE_LEVEL_NAMES,
+ L0, L1, L2, L3, L4, L5, L6, L7);
DD_SYS_WRAP(level_names, p);
DD_SYS_WRAP(level_names, T);
patch 1 in this series fixed a CLASSMAP usage error, this improves the api so that misuse is less likely. changes here: 0- Add William Swanson's public domain map macro: https://github.com/swansontec/map-macro/blob/master/map.h this makes 1 possible. 1- classname args to CLASSMAP macros were given as strings: "DRM_UT_CORE". Now they are the actual enum const symbols: DRM_UT_CORE. Direct use of symbols is tighter, more comprehensible by tools, grep 2- drop _base arg. _base was the value of the 1st classname that is now available due to 1, no need to require it 2x So take _base out of the API/kdoc. Note that the macro impl keeps the _base arg so that it can be used to set classmap.base, but reuses it in the MAP-stringify _base, __VA_ARGS__ expression. Also cleanup the API usage comment in test_dynamic_debug.c, and since comments in test-code might not be noticed, restate that here. Using the CLASSMAP api: - class-specifications are enum consts/symbols, like DRM_UT_CORE, DRM_UT_KMS, etc. their values define bits in the sysfs-node (like drm.debug) - they are stringified and accepted at >control echo class DRM_UT_CORE +p >control - multiple class-maps must share the per-module: 0-62 class_id space (by setting initial enum values to non-overlapping subranges) todo: fixup the 'i' prefix, a quick/dirty avoidance of MAP. NOTE: test_dynamic_debug.c also has this helper macro to wire a classmap to a drm.debug style parameter; its easier to just use it as a model/template as needed, rather than try to make it general enough to be an official API helper. define DD_SYS_WRAP(_model, _flags) \ static unsigned long bits_##_model; \ static struct ddebug_class_param _flags##_model = { \ .bits = &bits_##_model, \ .flags = #_flags, \ .map = &map_##_model, \ }; \ module_param_cb(_flags##_##_model, ¶m_ops_dyndbg_classes, &_flags##_model, 0600) Signed-off-by: Jim Cromie <jim.cromie@gmail.com> --- drivers/gpu/drm/drm_print.c | 22 +++++++------- include/drm/drm_print.h | 1 + include/linux/dynamic_debug.h | 17 +++++------ include/linux/map.h | 55 +++++++++++++++++++++++++++++++++++ lib/test_dynamic_debug.c | 43 +++++++++++++-------------- 5 files changed, 96 insertions(+), 42 deletions(-) create mode 100644 include/linux/map.h