| Message ID | 20230203182132.1307834-26-dmitry.baryshkov@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/msm/dpu: wide planes support | expand |
On 2/3/2023 10:21 AM, Dmitry Baryshkov wrote: > Rework static color fill code to separate the pipe / pipe_cfg handling. > This is a preparation for the r_pipe support. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 70 +++++++++++++---------- > 1 file changed, 41 insertions(+), 29 deletions(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c > index 05047192cb37..e2e85688ed3c 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c > @@ -639,20 +639,54 @@ static void _dpu_plane_setup_scaler(struct dpu_sw_pipe *pipe, > fmt); > } > > +static int _dpu_plane_color_fill_pipe(struct dpu_plane_state *pstate, > + struct dpu_sw_pipe *pipe, > + struct dpu_hw_sspp_cfg *old_pipe_cfg, Why is this called old_pipe_cfg instead of just pipe_cfg? > + u32 fill_color, > + const struct dpu_format *fmt) > +{ > + struct dpu_hw_sspp_cfg pipe_cfg; > + > + /* update sspp */ > + if (!pipe->sspp->ops.setup_solidfill) > + return 0; You can just return from here and make this function void? > + > + pipe->sspp->ops.setup_solidfill(pipe, fill_color); > + > + /* override scaler/decimation if solid fill */ > + pipe_cfg.dst_rect = old_pipe_cfg->dst_rect; > + > + pipe_cfg.src_rect.x1 = 0; > + pipe_cfg.src_rect.y1 = 0; > + pipe_cfg.src_rect.x2 = > + drm_rect_width(&pipe_cfg.dst_rect); > + pipe_cfg.src_rect.y2 = > + drm_rect_height(&pipe_cfg.dst_rect); > + > + if (pipe->sspp->ops.setup_format) > + pipe->sspp->ops.setup_format(pipe, fmt, DPU_SSPP_SOLID_FILL); > + > + if (pipe->sspp->ops.setup_rects) > + pipe->sspp->ops.setup_rects(pipe, &pipe_cfg); > + > + _dpu_plane_setup_scaler(pipe, fmt, true, &pipe_cfg, pstate->rotation); > + > + return 0; > +} > + > /** > * _dpu_plane_color_fill - enables color fill on plane > * @pdpu: Pointer to DPU plane object > * @color: RGB fill color value, [23..16] Blue, [15..8] Green, [7..0] Red > * @alpha: 8-bit fill alpha value, 255 selects 100% alpha > - * Returns: 0 on success > */ > -static int _dpu_plane_color_fill(struct dpu_plane *pdpu, > +static void _dpu_plane_color_fill(struct dpu_plane *pdpu, > uint32_t color, uint32_t alpha) > { > const struct dpu_format *fmt; > const struct drm_plane *plane = &pdpu->base; > struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state); > - struct dpu_hw_sspp_cfg pipe_cfg; > + u32 fill_color = (color & 0xFFFFFF) | ((alpha & 0xFF) << 24); > > DPU_DEBUG_PLANE(pdpu, "\n"); > > @@ -661,34 +695,12 @@ static int _dpu_plane_color_fill(struct dpu_plane *pdpu, > * h/w only supports RGB variants > */ > fmt = dpu_get_dpu_format(DRM_FORMAT_ABGR8888); > + /* should not happen ever */ > + if (!fmt) > + return; > > /* update sspp */ > - if (fmt && pstate->pipe.sspp->ops.setup_solidfill) { > - pstate->pipe.sspp->ops.setup_solidfill(&pstate->pipe, > - (color & 0xFFFFFF) | ((alpha & 0xFF) << 24)); > - > - /* override scaler/decimation if solid fill */ > - pipe_cfg.dst_rect = pstate->base.dst; > - > - pipe_cfg.src_rect.x1 = 0; > - pipe_cfg.src_rect.y1 = 0; > - pipe_cfg.src_rect.x2 = > - drm_rect_width(&pipe_cfg.dst_rect); > - pipe_cfg.src_rect.y2 = > - drm_rect_height(&pipe_cfg.dst_rect); > - > - if (pstate->pipe.sspp->ops.setup_format) > - pstate->pipe.sspp->ops.setup_format(&pstate->pipe, > - fmt, DPU_SSPP_SOLID_FILL); > - > - if (pstate->pipe.sspp->ops.setup_rects) > - pstate->pipe.sspp->ops.setup_rects(&pstate->pipe, > - &pipe_cfg); > - > - _dpu_plane_setup_scaler(&pstate->pipe, fmt, true, &pipe_cfg, pstate->rotation); > - } > - > - return 0; > + _dpu_plane_color_fill_pipe(pstate, &pstate->pipe, &pstate->pipe_cfg, fill_color, fmt); > } > > int dpu_plane_validate_multirect_v2(struct dpu_multirect_plane_states *plane)
On 09/02/2023 00:34, Abhinav Kumar wrote: > > > On 2/3/2023 10:21 AM, Dmitry Baryshkov wrote: >> Rework static color fill code to separate the pipe / pipe_cfg handling. >> This is a preparation for the r_pipe support. >> >> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> >> --- >> drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 70 +++++++++++++---------- >> 1 file changed, 41 insertions(+), 29 deletions(-) >> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c >> b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c >> index 05047192cb37..e2e85688ed3c 100644 >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c >> @@ -639,20 +639,54 @@ static void _dpu_plane_setup_scaler(struct >> dpu_sw_pipe *pipe, >> fmt); >> } >> +static int _dpu_plane_color_fill_pipe(struct dpu_plane_state *pstate, >> + struct dpu_sw_pipe *pipe, >> + struct dpu_hw_sspp_cfg *old_pipe_cfg, > > Why is this called old_pipe_cfg instead of just pipe_cfg? Ack. Probably got that wrong during mass-renaming and then missed to fix it. > > >> + u32 fill_color, >> + const struct dpu_format *fmt) >> +{ >> + struct dpu_hw_sspp_cfg pipe_cfg; >> + >> + /* update sspp */ >> + if (!pipe->sspp->ops.setup_solidfill) >> + return 0; > > You can just return from here and make this function void? Of course. > >> + >> + pipe->sspp->ops.setup_solidfill(pipe, fill_color); >> + >> + /* override scaler/decimation if solid fill */ >> + pipe_cfg.dst_rect = old_pipe_cfg->dst_rect; >> + >> + pipe_cfg.src_rect.x1 = 0; >> + pipe_cfg.src_rect.y1 = 0; >> + pipe_cfg.src_rect.x2 = >> + drm_rect_width(&pipe_cfg.dst_rect); >> + pipe_cfg.src_rect.y2 = >> + drm_rect_height(&pipe_cfg.dst_rect); >> + >> + if (pipe->sspp->ops.setup_format) >> + pipe->sspp->ops.setup_format(pipe, fmt, DPU_SSPP_SOLID_FILL); >> + >> + if (pipe->sspp->ops.setup_rects) >> + pipe->sspp->ops.setup_rects(pipe, &pipe_cfg); >> + >> + _dpu_plane_setup_scaler(pipe, fmt, true, &pipe_cfg, >> pstate->rotation); >> + >> + return 0; >> +} >> + >> /** >> * _dpu_plane_color_fill - enables color fill on plane >> * @pdpu: Pointer to DPU plane object >> * @color: RGB fill color value, [23..16] Blue, [15..8] Green, >> [7..0] Red >> * @alpha: 8-bit fill alpha value, 255 selects 100% alpha >> - * Returns: 0 on success >> */ >> -static int _dpu_plane_color_fill(struct dpu_plane *pdpu, >> +static void _dpu_plane_color_fill(struct dpu_plane *pdpu, >> uint32_t color, uint32_t alpha) >> { >> const struct dpu_format *fmt; >> const struct drm_plane *plane = &pdpu->base; >> struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state); >> - struct dpu_hw_sspp_cfg pipe_cfg; >> + u32 fill_color = (color & 0xFFFFFF) | ((alpha & 0xFF) << 24); >> DPU_DEBUG_PLANE(pdpu, "\n"); >> @@ -661,34 +695,12 @@ static int _dpu_plane_color_fill(struct >> dpu_plane *pdpu, >> * h/w only supports RGB variants >> */ >> fmt = dpu_get_dpu_format(DRM_FORMAT_ABGR8888); >> + /* should not happen ever */ >> + if (!fmt) >> + return; >> /* update sspp */ >> - if (fmt && pstate->pipe.sspp->ops.setup_solidfill) { >> - pstate->pipe.sspp->ops.setup_solidfill(&pstate->pipe, >> - (color & 0xFFFFFF) | ((alpha & 0xFF) << 24)); >> - >> - /* override scaler/decimation if solid fill */ >> - pipe_cfg.dst_rect = pstate->base.dst; >> - >> - pipe_cfg.src_rect.x1 = 0; >> - pipe_cfg.src_rect.y1 = 0; >> - pipe_cfg.src_rect.x2 = >> - drm_rect_width(&pipe_cfg.dst_rect); >> - pipe_cfg.src_rect.y2 = >> - drm_rect_height(&pipe_cfg.dst_rect); >> - >> - if (pstate->pipe.sspp->ops.setup_format) >> - pstate->pipe.sspp->ops.setup_format(&pstate->pipe, >> - fmt, DPU_SSPP_SOLID_FILL); >> - >> - if (pstate->pipe.sspp->ops.setup_rects) >> - pstate->pipe.sspp->ops.setup_rects(&pstate->pipe, >> - &pipe_cfg); >> - >> - _dpu_plane_setup_scaler(&pstate->pipe, fmt, true, &pipe_cfg, >> pstate->rotation); >> - } >> - >> - return 0; >> + _dpu_plane_color_fill_pipe(pstate, &pstate->pipe, >> &pstate->pipe_cfg, fill_color, fmt); >> } >> int dpu_plane_validate_multirect_v2(struct >> dpu_multirect_plane_states *plane)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c index 05047192cb37..e2e85688ed3c 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c @@ -639,20 +639,54 @@ static void _dpu_plane_setup_scaler(struct dpu_sw_pipe *pipe, fmt); } +static int _dpu_plane_color_fill_pipe(struct dpu_plane_state *pstate, + struct dpu_sw_pipe *pipe, + struct dpu_hw_sspp_cfg *old_pipe_cfg, + u32 fill_color, + const struct dpu_format *fmt) +{ + struct dpu_hw_sspp_cfg pipe_cfg; + + /* update sspp */ + if (!pipe->sspp->ops.setup_solidfill) + return 0; + + pipe->sspp->ops.setup_solidfill(pipe, fill_color); + + /* override scaler/decimation if solid fill */ + pipe_cfg.dst_rect = old_pipe_cfg->dst_rect; + + pipe_cfg.src_rect.x1 = 0; + pipe_cfg.src_rect.y1 = 0; + pipe_cfg.src_rect.x2 = + drm_rect_width(&pipe_cfg.dst_rect); + pipe_cfg.src_rect.y2 = + drm_rect_height(&pipe_cfg.dst_rect); + + if (pipe->sspp->ops.setup_format) + pipe->sspp->ops.setup_format(pipe, fmt, DPU_SSPP_SOLID_FILL); + + if (pipe->sspp->ops.setup_rects) + pipe->sspp->ops.setup_rects(pipe, &pipe_cfg); + + _dpu_plane_setup_scaler(pipe, fmt, true, &pipe_cfg, pstate->rotation); + + return 0; +} + /** * _dpu_plane_color_fill - enables color fill on plane * @pdpu: Pointer to DPU plane object * @color: RGB fill color value, [23..16] Blue, [15..8] Green, [7..0] Red * @alpha: 8-bit fill alpha value, 255 selects 100% alpha - * Returns: 0 on success */ -static int _dpu_plane_color_fill(struct dpu_plane *pdpu, +static void _dpu_plane_color_fill(struct dpu_plane *pdpu, uint32_t color, uint32_t alpha) { const struct dpu_format *fmt; const struct drm_plane *plane = &pdpu->base; struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state); - struct dpu_hw_sspp_cfg pipe_cfg; + u32 fill_color = (color & 0xFFFFFF) | ((alpha & 0xFF) << 24); DPU_DEBUG_PLANE(pdpu, "\n"); @@ -661,34 +695,12 @@ static int _dpu_plane_color_fill(struct dpu_plane *pdpu, * h/w only supports RGB variants */ fmt = dpu_get_dpu_format(DRM_FORMAT_ABGR8888); + /* should not happen ever */ + if (!fmt) + return; /* update sspp */ - if (fmt && pstate->pipe.sspp->ops.setup_solidfill) { - pstate->pipe.sspp->ops.setup_solidfill(&pstate->pipe, - (color & 0xFFFFFF) | ((alpha & 0xFF) << 24)); - - /* override scaler/decimation if solid fill */ - pipe_cfg.dst_rect = pstate->base.dst; - - pipe_cfg.src_rect.x1 = 0; - pipe_cfg.src_rect.y1 = 0; - pipe_cfg.src_rect.x2 = - drm_rect_width(&pipe_cfg.dst_rect); - pipe_cfg.src_rect.y2 = - drm_rect_height(&pipe_cfg.dst_rect); - - if (pstate->pipe.sspp->ops.setup_format) - pstate->pipe.sspp->ops.setup_format(&pstate->pipe, - fmt, DPU_SSPP_SOLID_FILL); - - if (pstate->pipe.sspp->ops.setup_rects) - pstate->pipe.sspp->ops.setup_rects(&pstate->pipe, - &pipe_cfg); - - _dpu_plane_setup_scaler(&pstate->pipe, fmt, true, &pipe_cfg, pstate->rotation); - } - - return 0; + _dpu_plane_color_fill_pipe(pstate, &pstate->pipe, &pstate->pipe_cfg, fill_color, fmt); } int dpu_plane_validate_multirect_v2(struct dpu_multirect_plane_states *plane)
Rework static color fill code to separate the pipe / pipe_cfg handling. This is a preparation for the r_pipe support. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 70 +++++++++++++---------- 1 file changed, 41 insertions(+), 29 deletions(-)