diff mbox series

[v3,4/5] arm64: dts: qcom: sm8450: switch to usb3/dp combo phy

Message ID 20230206-topic-sm8450-upstream-dp-controller-v3-4-636ef9e99932@linaro.org (mailing list archive)
State New, archived
Headers show
Series arm64: dts: qcom: add DP Controller to SM8350 & SM8450 DTS | expand

Commit Message

Neil Armstrong Feb. 10, 2023, 2:44 p.m. UTC
The QMP PHY is a USB3/DP combo phy, switch to the newly
documented bindings and register the clocks to the GCC
and DISPCC controllers.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 42 +++++++++++++-----------------------
 1 file changed, 15 insertions(+), 27 deletions(-)

Comments

Dmitry Baryshkov Feb. 10, 2023, 3:18 p.m. UTC | #1
On 10/02/2023 16:44, Neil Armstrong wrote:
> The QMP PHY is a USB3/DP combo phy, switch to the newly
> documented bindings and register the clocks to the GCC
> and DISPCC controllers.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8450.dtsi | 42 +++++++++++++-----------------------
>   1 file changed, 15 insertions(+), 27 deletions(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 1a744a33bcf4..6caa2c8efb46 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -11,6 +11,7 @@ 
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/interconnect/qcom,sm8450.h>
 #include <dt-bindings/soc/qcom,gpr.h>
@@ -748,7 +749,7 @@  gcc: clock-controller@100000 {
 				 <&ufs_mem_phy_lanes 0>,
 				 <&ufs_mem_phy_lanes 1>,
 				 <&ufs_mem_phy_lanes 2>,
-				 <0>;
+				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 			clock-names = "bi_tcxo",
 				      "sleep_clk",
 				      "pcie_0_pipe_clk",
@@ -2034,37 +2035,24 @@  usb_1_hsphy: phy@88e3000 {
 			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
 		};
 
-		usb_1_qmpphy: phy-wrapper@88e9000 {
-			compatible = "qcom,sm8450-qmp-usb3-phy";
-			reg = <0 0x088e9000 0 0x200>,
-			      <0 0x088e8000 0 0x20>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+		usb_1_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm8450-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x4000>;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
 
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: phy@88e9200 {
-				reg = <0 0x088e9200 0 0x200>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x400>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
 		};
 
 		remoteproc_slpi: remoteproc@2400000 {
@@ -2972,8 +2960,8 @@  dispcc: clock-controller@af00000 {
 				 <&mdss_dsi0_phy 1>,
 				 <&mdss_dsi1_phy 0>,
 				 <&mdss_dsi1_phy 1>,
-				 <0>, /* dp0 */
-				 <0>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <0>, /* dp1 */
 				 <0>,
 				 <0>, /* dp2 */
@@ -4153,7 +4141,7 @@  usb_1_dwc3: usb@a600000 {
 				iommus = <&apps_smmu 0x0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};