| Message ID | 20230209184426.4437-4-quic_jesszhan@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Move TE setup to prepare_for_kickoff() | expand |
On 09/02/2023 20:44, Jessica Zhang wrote: > Now that the TE setup has been moved to prepare_for_kickoff(), > move empty prepare_commit() from DPU driver. s/move/remove/ Also the DPU's prepare_commit() is not empty. Please mention dpu_encoder_prepare_commit() becoming (or being) empty. > > Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 19 ----------------- > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 7 ------- > .../drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 6 ------ > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 21 ------------------- > 4 files changed, 53 deletions(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > index dcceed91aed8..35e120b5ef53 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > @@ -2090,25 +2090,6 @@ void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc) > ctl->ops.clear_pending_flush(ctl); > } > > -void dpu_encoder_prepare_commit(struct drm_encoder *drm_enc) > -{ > - struct dpu_encoder_virt *dpu_enc; > - struct dpu_encoder_phys *phys; > - int i; > - > - if (!drm_enc) { > - DPU_ERROR("invalid encoder\n"); > - return; > - } > - dpu_enc = to_dpu_encoder_virt(drm_enc); > - > - for (i = 0; i < dpu_enc->num_phys_encs; i++) { > - phys = dpu_enc->phys_encs[i]; > - if (phys->ops.prepare_commit) > - phys->ops.prepare_commit(phys); > - } > -} > - > #ifdef CONFIG_DEBUG_FS > static int _dpu_encoder_status_show(struct seq_file *s, void *data) > { > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h > index 9e7236ef34e6..2c9ef8d1b877 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h > @@ -146,13 +146,6 @@ struct drm_encoder *dpu_encoder_init( > int dpu_encoder_setup(struct drm_device *dev, struct drm_encoder *enc, > struct msm_display_info *disp_info); > > -/** > - * dpu_encoder_prepare_commit - prepare encoder at the very beginning of an > - * atomic commit, before any registers are written > - * @drm_enc: Pointer to previously created drm encoder structure > - */ > -void dpu_encoder_prepare_commit(struct drm_encoder *drm_enc); > - > /** > * dpu_encoder_set_idle_timeout - set the idle timeout for video > * and command mode encoders. > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c > index 561406d92a1a..4c189b9fa9b8 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c > @@ -703,11 +703,6 @@ static void dpu_encoder_phys_cmd_prepare_for_kickoff( > atomic_read(&phys_enc->pending_kickoff_cnt)); > } > > -static void dpu_encoder_phys_cmd_prepare_commit( > - struct dpu_encoder_phys *phys_enc) > -{ > -} > - > static int _dpu_encoder_phys_cmd_wait_for_ctl_start( > struct dpu_encoder_phys *phys_enc) > { > @@ -807,7 +802,6 @@ static void dpu_encoder_phys_cmd_trigger_start( > static void dpu_encoder_phys_cmd_init_ops( > struct dpu_encoder_phys_ops *ops) > { > - ops->prepare_commit = dpu_encoder_phys_cmd_prepare_commit; Also please don't forget to remove prepare_commit from dpu_encoder_phys_ops. > ops->is_master = dpu_encoder_phys_cmd_is_master; > ops->atomic_mode_set = dpu_encoder_phys_cmd_atomic_mode_set; > ops->enable = dpu_encoder_phys_cmd_enable; > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > index 165958d47ec6..6f7ddbf0d9b7 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > @@ -425,26 +425,6 @@ static ktime_t dpu_kms_vsync_time(struct msm_kms *kms, struct drm_crtc *crtc) > return ktime_get(); > } > > -static void dpu_kms_prepare_commit(struct msm_kms *kms, > - struct drm_atomic_state *state) > -{ > - struct drm_crtc *crtc; > - struct drm_crtc_state *crtc_state; > - struct drm_encoder *encoder; > - int i; > - > - if (!kms) > - return; > - > - /* Call prepare_commit for all affected encoders */ > - for_each_new_crtc_in_state(state, crtc, crtc_state, i) { > - drm_for_each_encoder_mask(encoder, crtc->dev, > - crtc_state->encoder_mask) { > - dpu_encoder_prepare_commit(encoder); > - } > - } > -} > - > static void dpu_kms_flush_commit(struct msm_kms *kms, unsigned crtc_mask) > { > struct dpu_kms *dpu_kms = to_dpu_kms(kms); > @@ -949,7 +929,6 @@ static const struct msm_kms_funcs kms_funcs = { > .enable_commit = dpu_kms_enable_commit, > .disable_commit = dpu_kms_disable_commit, > .vsync_time = dpu_kms_vsync_time, > - .prepare_commit = dpu_kms_prepare_commit, > .flush_commit = dpu_kms_flush_commit, > .wait_flush = dpu_kms_wait_flush, > .complete_commit = dpu_kms_complete_commit,
On 2/9/2023 10:51 AM, Dmitry Baryshkov wrote: > On 09/02/2023 20:44, Jessica Zhang wrote: >> Now that the TE setup has been moved to prepare_for_kickoff(), >> move empty prepare_commit() from DPU driver. > > s/move/remove/ > > Also the DPU's prepare_commit() is not empty. Please mention > dpu_encoder_prepare_commit() becoming (or being) empty. Hi Dmitry, Acked. > > >> >> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> >> --- >> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 19 ----------------- >> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 7 ------- >> .../drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 6 ------ >> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 21 ------------------- >> 4 files changed, 53 deletions(-) >> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c >> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c >> index dcceed91aed8..35e120b5ef53 100644 >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c >> @@ -2090,25 +2090,6 @@ void dpu_encoder_helper_phys_cleanup(struct >> dpu_encoder_phys *phys_enc) >> ctl->ops.clear_pending_flush(ctl); >> } >> -void dpu_encoder_prepare_commit(struct drm_encoder *drm_enc) >> -{ >> - struct dpu_encoder_virt *dpu_enc; >> - struct dpu_encoder_phys *phys; >> - int i; >> - >> - if (!drm_enc) { >> - DPU_ERROR("invalid encoder\n"); >> - return; >> - } >> - dpu_enc = to_dpu_encoder_virt(drm_enc); >> - >> - for (i = 0; i < dpu_enc->num_phys_encs; i++) { >> - phys = dpu_enc->phys_encs[i]; >> - if (phys->ops.prepare_commit) >> - phys->ops.prepare_commit(phys); >> - } >> -} >> - >> #ifdef CONFIG_DEBUG_FS >> static int _dpu_encoder_status_show(struct seq_file *s, void *data) >> { >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h >> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h >> index 9e7236ef34e6..2c9ef8d1b877 100644 >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h >> @@ -146,13 +146,6 @@ struct drm_encoder *dpu_encoder_init( >> int dpu_encoder_setup(struct drm_device *dev, struct drm_encoder *enc, >> struct msm_display_info *disp_info); >> -/** >> - * dpu_encoder_prepare_commit - prepare encoder at the very beginning >> of an >> - * atomic commit, before any registers are written >> - * @drm_enc: Pointer to previously created drm encoder structure >> - */ >> -void dpu_encoder_prepare_commit(struct drm_encoder *drm_enc); >> - >> /** >> * dpu_encoder_set_idle_timeout - set the idle timeout for video >> * and command mode encoders. >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c >> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c >> index 561406d92a1a..4c189b9fa9b8 100644 >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c >> @@ -703,11 +703,6 @@ static void >> dpu_encoder_phys_cmd_prepare_for_kickoff( >> atomic_read(&phys_enc->pending_kickoff_cnt)); >> } >> -static void dpu_encoder_phys_cmd_prepare_commit( >> - struct dpu_encoder_phys *phys_enc) >> -{ >> -} >> - >> static int _dpu_encoder_phys_cmd_wait_for_ctl_start( >> struct dpu_encoder_phys *phys_enc) >> { >> @@ -807,7 +802,6 @@ static void dpu_encoder_phys_cmd_trigger_start( >> static void dpu_encoder_phys_cmd_init_ops( >> struct dpu_encoder_phys_ops *ops) >> { >> - ops->prepare_commit = dpu_encoder_phys_cmd_prepare_commit; > > Also please don't forget to remove prepare_commit from > dpu_encoder_phys_ops. Acked. Thanks, Jessica Zhang > >> ops->is_master = dpu_encoder_phys_cmd_is_master; >> ops->atomic_mode_set = dpu_encoder_phys_cmd_atomic_mode_set; >> ops->enable = dpu_encoder_phys_cmd_enable; >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c >> b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c >> index 165958d47ec6..6f7ddbf0d9b7 100644 >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c >> @@ -425,26 +425,6 @@ static ktime_t dpu_kms_vsync_time(struct msm_kms >> *kms, struct drm_crtc *crtc) >> return ktime_get(); >> } >> -static void dpu_kms_prepare_commit(struct msm_kms *kms, >> - struct drm_atomic_state *state) >> -{ >> - struct drm_crtc *crtc; >> - struct drm_crtc_state *crtc_state; >> - struct drm_encoder *encoder; >> - int i; >> - >> - if (!kms) >> - return; >> - >> - /* Call prepare_commit for all affected encoders */ >> - for_each_new_crtc_in_state(state, crtc, crtc_state, i) { >> - drm_for_each_encoder_mask(encoder, crtc->dev, >> - crtc_state->encoder_mask) { >> - dpu_encoder_prepare_commit(encoder); >> - } >> - } >> -} >> - >> static void dpu_kms_flush_commit(struct msm_kms *kms, unsigned >> crtc_mask) >> { >> struct dpu_kms *dpu_kms = to_dpu_kms(kms); >> @@ -949,7 +929,6 @@ static const struct msm_kms_funcs kms_funcs = { >> .enable_commit = dpu_kms_enable_commit, >> .disable_commit = dpu_kms_disable_commit, >> .vsync_time = dpu_kms_vsync_time, >> - .prepare_commit = dpu_kms_prepare_commit, >> .flush_commit = dpu_kms_flush_commit, >> .wait_flush = dpu_kms_wait_flush, >> .complete_commit = dpu_kms_complete_commit, > > -- > With best wishes > Dmitry >
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c index dcceed91aed8..35e120b5ef53 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c @@ -2090,25 +2090,6 @@ void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc) ctl->ops.clear_pending_flush(ctl); } -void dpu_encoder_prepare_commit(struct drm_encoder *drm_enc) -{ - struct dpu_encoder_virt *dpu_enc; - struct dpu_encoder_phys *phys; - int i; - - if (!drm_enc) { - DPU_ERROR("invalid encoder\n"); - return; - } - dpu_enc = to_dpu_encoder_virt(drm_enc); - - for (i = 0; i < dpu_enc->num_phys_encs; i++) { - phys = dpu_enc->phys_encs[i]; - if (phys->ops.prepare_commit) - phys->ops.prepare_commit(phys); - } -} - #ifdef CONFIG_DEBUG_FS static int _dpu_encoder_status_show(struct seq_file *s, void *data) { diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h index 9e7236ef34e6..2c9ef8d1b877 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h @@ -146,13 +146,6 @@ struct drm_encoder *dpu_encoder_init( int dpu_encoder_setup(struct drm_device *dev, struct drm_encoder *enc, struct msm_display_info *disp_info); -/** - * dpu_encoder_prepare_commit - prepare encoder at the very beginning of an - * atomic commit, before any registers are written - * @drm_enc: Pointer to previously created drm encoder structure - */ -void dpu_encoder_prepare_commit(struct drm_encoder *drm_enc); - /** * dpu_encoder_set_idle_timeout - set the idle timeout for video * and command mode encoders. diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c index 561406d92a1a..4c189b9fa9b8 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c @@ -703,11 +703,6 @@ static void dpu_encoder_phys_cmd_prepare_for_kickoff( atomic_read(&phys_enc->pending_kickoff_cnt)); } -static void dpu_encoder_phys_cmd_prepare_commit( - struct dpu_encoder_phys *phys_enc) -{ -} - static int _dpu_encoder_phys_cmd_wait_for_ctl_start( struct dpu_encoder_phys *phys_enc) { @@ -807,7 +802,6 @@ static void dpu_encoder_phys_cmd_trigger_start( static void dpu_encoder_phys_cmd_init_ops( struct dpu_encoder_phys_ops *ops) { - ops->prepare_commit = dpu_encoder_phys_cmd_prepare_commit; ops->is_master = dpu_encoder_phys_cmd_is_master; ops->atomic_mode_set = dpu_encoder_phys_cmd_atomic_mode_set; ops->enable = dpu_encoder_phys_cmd_enable; diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index 165958d47ec6..6f7ddbf0d9b7 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -425,26 +425,6 @@ static ktime_t dpu_kms_vsync_time(struct msm_kms *kms, struct drm_crtc *crtc) return ktime_get(); } -static void dpu_kms_prepare_commit(struct msm_kms *kms, - struct drm_atomic_state *state) -{ - struct drm_crtc *crtc; - struct drm_crtc_state *crtc_state; - struct drm_encoder *encoder; - int i; - - if (!kms) - return; - - /* Call prepare_commit for all affected encoders */ - for_each_new_crtc_in_state(state, crtc, crtc_state, i) { - drm_for_each_encoder_mask(encoder, crtc->dev, - crtc_state->encoder_mask) { - dpu_encoder_prepare_commit(encoder); - } - } -} - static void dpu_kms_flush_commit(struct msm_kms *kms, unsigned crtc_mask) { struct dpu_kms *dpu_kms = to_dpu_kms(kms); @@ -949,7 +929,6 @@ static const struct msm_kms_funcs kms_funcs = { .enable_commit = dpu_kms_enable_commit, .disable_commit = dpu_kms_disable_commit, .vsync_time = dpu_kms_vsync_time, - .prepare_commit = dpu_kms_prepare_commit, .flush_commit = dpu_kms_flush_commit, .wait_flush = dpu_kms_wait_flush, .complete_commit = dpu_kms_complete_commit,
Now that the TE setup has been moved to prepare_for_kickoff(), move empty prepare_commit() from DPU driver. Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 19 ----------------- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 7 ------- .../drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 6 ------ drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 21 ------------------- 4 files changed, 53 deletions(-)