| Message ID | 20230329-rfc-msm-dsc-helper-v2-6-3c13ced536b2@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Introduce MSM-specific DSC helpers | expand |
On 31/03/2023 21:49, Jessica Zhang wrote: > Use the correct calculations for eol_byte_num and pkt_per_line. Nit: this line duplicates commit subject and thus is mostly useless. > > Currently, pkt_per_line is calculated by dividing slice_per_intf by > slice_count. This is incorrect, as slice_per_intf should be divided by > slice_per_pkt, which is not always equivalent to slice_count as it is > possible for there to be multiple soft slices per interface even though > a panel only specifies one slice per packet. > > For eol_byte_num, the current calculation describes the size of the > trailing bytes in the line. Change the calculation so that it describes > the number of padding bytes instead. > > Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration") > Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> > --- > drivers/gpu/drm/msm/dsi/dsi_host.c | 10 ++++++---- > 1 file changed, 6 insertions(+), 4 deletions(-) Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index b7ab81737473..613ec19f4383 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -842,7 +842,7 @@ static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod { struct drm_dsc_config *dsc = msm_host->dsc; u32 reg, reg_ctrl, reg_ctrl2; - u32 slice_per_intf, total_bytes_per_intf; + u32 slice_per_intf; u32 pkt_per_line; u32 eol_byte_num; @@ -859,10 +859,12 @@ static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod if (dsc->slice_count > slice_per_intf) dsc->slice_count = 1; - total_bytes_per_intf = dsc->slice_chunk_size * slice_per_intf; + eol_byte_num = msm_dsc_get_eol_byte_num(dsc, hdisplay, dsi_get_bpp(msm_host->format)); - eol_byte_num = total_bytes_per_intf % 3; - pkt_per_line = slice_per_intf / dsc->slice_count; + /* Default to 1 slice_per_pkt, so pkt_per_line will be equal to + * slice per intf. + */ + pkt_per_line = slice_per_intf; if (is_cmd_mode) /* packet data type */ reg = DSI_COMMAND_COMPRESSION_MODE_CTRL_STREAM0_DATATYPE(MIPI_DSI_DCS_LONG_WRITE);
Use the correct calculations for eol_byte_num and pkt_per_line. Currently, pkt_per_line is calculated by dividing slice_per_intf by slice_count. This is incorrect, as slice_per_intf should be divided by slice_per_pkt, which is not always equivalent to slice_count as it is possible for there to be multiple soft slices per interface even though a panel only specifies one slice per packet. For eol_byte_num, the current calculation describes the size of the trailing bytes in the line. Change the calculation so that it describes the number of padding bytes instead. Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration") Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> --- drivers/gpu/drm/msm/dsi/dsi_host.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)