diff mbox series

[v3,6/6] drm/msm/dsi: Fix calculations pkt_per_line

Message ID 20230329-rfc-msm-dsc-helper-v3-6-6bec0d277a83@quicinc.com (mailing list archive)
State New, archived
Headers show
Series Introduce MSM-specific DSC helpers | expand

Commit Message

Jessica Zhang April 4, 2023, 11:56 p.m. UTC 
Currently, pkt_per_line is calculated by dividing slice_per_intf by
slice_count. This is incorrect, as slice_per_intf should be divided by
slice_per_pkt, which is not always equivalent to slice_count as it is
possible for there to be multiple soft slices per interface even though
a panel only specifies one slice per packet.

Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration")
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 9c33060e4c29..d888978926da 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -862,7 +862,11 @@  static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
 	total_bytes_per_intf = msm_dsc_get_bytes_per_intf(dsc, hdisplay);
 
 	eol_byte_num = total_bytes_per_intf % 3;
-	pkt_per_line = slice_per_intf / dsc->slice_count;
+
+	/* Default to 1 slice_per_pkt, so pkt_per_line will be equal to
+	 * slice per intf.
+	 */
+	pkt_per_line = slice_per_intf;
 
 	if (is_cmd_mode) /* packet data type */
 		reg = DSI_COMMAND_COMPRESSION_MODE_CTRL_STREAM0_DATATYPE(MIPI_DSI_DCS_LONG_WRITE);