@@ -999,7 +999,14 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
if (!msm_host->dsc)
wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
else
- wc = msm_host->dsc->slice_chunk_size * msm_host->dsc->slice_count + 1;
+ /*
+ * When DSC is enabled, WC = slice_chunk_size * slice_per_packet + 1.
+ * Currently, the driver only supports default value of slice_per_packet = 1
+ *
+ * TODO: Expand mipi_dsi_device struct to hold slice_per_packet info
+ * and adjust DSC math to account for slice_per_packet.
+ */
+ wc = msm_host->dsc->slice_chunk_size + 1;
dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_CTRL,
DSI_CMD_MDP_STREAM0_CTRL_WORD_COUNT(wc) |
Currently, word count is calculated using slice_count. This is incorrect as downstream uses slice per packet, which is different from slice_count. Slice count represents the number of soft slices per interface, and its value will not always match that of slice per packet. For example, it is possible to have cases where there are multiple soft slices per interface but the panel specifies only one slice per packet. Thus, use the default value of one slice per packet and remove slice_count from the word count calculation. Changes in v2: - "drm_panel" -> "mipi_dsi_device" in TODO comment Fixes: bc6b6ff8135c ("drm/msm/dsi: Use DSC slice(s) packet size to compute word count") Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> --- drivers/gpu/drm/msm/dsi/dsi_host.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)