Message ID | 20230516110038.2413224-8-schnelle@linux.ibm.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | None | expand |
Hi Am 16.05.23 um 13:00 schrieb Niklas Schnelle: > In a future patch HAS_IOPORT=n will result in inb()/outb() and friends > not being declared. We thus need to add HAS_IOPORT as dependency for > those drivers using them. In the bochs driver there is optional MMIO > support detected at runtime, warn if this isn't taken when > HAS_IOPORT is not defined. > > There is also a direct and hard coded use in cirrus.c which according to > the comment is only necessary during resume. Let's just skip this as > for example s390 which doesn't have I/O port support also doesen't > support suspend/resume. > > Co-developed-by: Arnd Bergmann <arnd@kernel.org> > Signed-off-by: Arnd Bergmann <arnd@kernel.org> > Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> > --- > Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so > per-subsystem patches may be applied independently > > drivers/gpu/drm/qxl/Kconfig | 1 + > drivers/gpu/drm/tiny/bochs.c | 17 +++++++++++++++++ > drivers/gpu/drm/tiny/cirrus.c | 2 ++ There are more invocations in gma500. See[1] [1] https://elixir.bootlin.com/linux/v6.3/source/drivers/gpu/drm/gma500/cdv_device.c#L30 > 3 files changed, 20 insertions(+) > > diff --git a/drivers/gpu/drm/qxl/Kconfig b/drivers/gpu/drm/qxl/Kconfig > index ca3f51c2a8fe..d0e0d440c8d9 100644 > --- a/drivers/gpu/drm/qxl/Kconfig > +++ b/drivers/gpu/drm/qxl/Kconfig > @@ -2,6 +2,7 @@ > config DRM_QXL > tristate "QXL virtual GPU" > depends on DRM && PCI && MMU > + depends on HAS_IOPORT > select DRM_KMS_HELPER > select DRM_TTM > select DRM_TTM_HELPER > diff --git a/drivers/gpu/drm/tiny/bochs.c b/drivers/gpu/drm/tiny/bochs.c > index d254679a136e..3710339407cc 100644 > --- a/drivers/gpu/drm/tiny/bochs.c > +++ b/drivers/gpu/drm/tiny/bochs.c > @@ -2,6 +2,7 @@ > > #include <linux/module.h> > #include <linux/pci.h> > +#include <asm/bug.h> <linux/bug.h> please. Best regards Thomas > > #include <drm/drm_aperture.h> > #include <drm/drm_atomic_helper.h> > @@ -105,7 +106,9 @@ static void bochs_vga_writeb(struct bochs_device *bochs, u16 ioport, u8 val) > > writeb(val, bochs->mmio + offset); > } else { > +#ifdef CONFIG_HAS_IOPORT > outb(val, ioport); > +#endif > } > } > > @@ -119,7 +122,11 @@ static u8 bochs_vga_readb(struct bochs_device *bochs, u16 ioport) > > return readb(bochs->mmio + offset); > } else { > +#ifdef CONFIG_HAS_IOPORT > return inb(ioport); > +#else > + return 0xff; > +#endif > } > } > > @@ -132,8 +139,12 @@ static u16 bochs_dispi_read(struct bochs_device *bochs, u16 reg) > > ret = readw(bochs->mmio + offset); > } else { > +#ifdef CONFIG_HAS_IOPORT > outw(reg, VBE_DISPI_IOPORT_INDEX); > ret = inw(VBE_DISPI_IOPORT_DATA); > +#else > + ret = 0xffff; > +#endif > } > return ret; > } > @@ -145,8 +156,10 @@ static void bochs_dispi_write(struct bochs_device *bochs, u16 reg, u16 val) > > writew(val, bochs->mmio + offset); > } else { > +#ifdef CONFIG_HAS_IOPORT > outw(reg, VBE_DISPI_IOPORT_INDEX); > outw(val, VBE_DISPI_IOPORT_DATA); > +#endif > } > } > > @@ -229,6 +242,10 @@ static int bochs_hw_init(struct drm_device *dev) > return -ENOMEM; > } > } else { > + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) { > + DRM_ERROR("I/O ports are not supported\n"); > + return -EIO; > + } > ioaddr = VBE_DISPI_IOPORT_INDEX; > iosize = 2; > if (!request_region(ioaddr, iosize, "bochs-drm")) { > diff --git a/drivers/gpu/drm/tiny/cirrus.c b/drivers/gpu/drm/tiny/cirrus.c > index 594bc472862f..c65fea049bc7 100644 > --- a/drivers/gpu/drm/tiny/cirrus.c > +++ b/drivers/gpu/drm/tiny/cirrus.c > @@ -508,8 +508,10 @@ static void cirrus_crtc_helper_atomic_enable(struct drm_crtc *crtc, > > cirrus_mode_set(cirrus, &crtc_state->mode); > > +#ifdef CONFIG_HAS_IOPORT > /* Unblank (needed on S3 resume, vgabios doesn't do it then) */ > outb(VGA_AR_ENABLE_DISPLAY, VGA_ATT_W); > +#endif > > drm_dev_exit(idx); > }
On Tue, May 16, 2023, at 19:13, Thomas Zimmermann wrote: > > Am 16.05.23 um 13:00 schrieb Niklas Schnelle: >> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends >> not being declared. We thus need to add HAS_IOPORT as dependency for >> those drivers using them. In the bochs driver there is optional MMIO >> support detected at runtime, warn if this isn't taken when >> HAS_IOPORT is not defined. >> >> There is also a direct and hard coded use in cirrus.c which according to >> the comment is only necessary during resume. Let's just skip this as >> for example s390 which doesn't have I/O port support also doesen't >> support suspend/resume. >> >> Co-developed-by: Arnd Bergmann <arnd@kernel.org> >> Signed-off-by: Arnd Bergmann <arnd@kernel.org> >> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> >> --- >> Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so >> per-subsystem patches may be applied independently >> >> drivers/gpu/drm/qxl/Kconfig | 1 + >> drivers/gpu/drm/tiny/bochs.c | 17 +++++++++++++++++ >> drivers/gpu/drm/tiny/cirrus.c | 2 ++ > > There are more invocations in gma500. See[1] > > [1] > https://elixir.bootlin.com/linux/v6.3/source/drivers/gpu/drm/gma500/cdv_device.c#L30 GMA500 already has "depends on X86", so I don't think any changes are needed there -- x86 is already highly dependent on I/O ports for a number of reasons. Arnd
diff --git a/drivers/gpu/drm/qxl/Kconfig b/drivers/gpu/drm/qxl/Kconfig index ca3f51c2a8fe..d0e0d440c8d9 100644 --- a/drivers/gpu/drm/qxl/Kconfig +++ b/drivers/gpu/drm/qxl/Kconfig @@ -2,6 +2,7 @@ config DRM_QXL tristate "QXL virtual GPU" depends on DRM && PCI && MMU + depends on HAS_IOPORT select DRM_KMS_HELPER select DRM_TTM select DRM_TTM_HELPER diff --git a/drivers/gpu/drm/tiny/bochs.c b/drivers/gpu/drm/tiny/bochs.c index d254679a136e..3710339407cc 100644 --- a/drivers/gpu/drm/tiny/bochs.c +++ b/drivers/gpu/drm/tiny/bochs.c @@ -2,6 +2,7 @@ #include <linux/module.h> #include <linux/pci.h> +#include <asm/bug.h> #include <drm/drm_aperture.h> #include <drm/drm_atomic_helper.h> @@ -105,7 +106,9 @@ static void bochs_vga_writeb(struct bochs_device *bochs, u16 ioport, u8 val) writeb(val, bochs->mmio + offset); } else { +#ifdef CONFIG_HAS_IOPORT outb(val, ioport); +#endif } } @@ -119,7 +122,11 @@ static u8 bochs_vga_readb(struct bochs_device *bochs, u16 ioport) return readb(bochs->mmio + offset); } else { +#ifdef CONFIG_HAS_IOPORT return inb(ioport); +#else + return 0xff; +#endif } } @@ -132,8 +139,12 @@ static u16 bochs_dispi_read(struct bochs_device *bochs, u16 reg) ret = readw(bochs->mmio + offset); } else { +#ifdef CONFIG_HAS_IOPORT outw(reg, VBE_DISPI_IOPORT_INDEX); ret = inw(VBE_DISPI_IOPORT_DATA); +#else + ret = 0xffff; +#endif } return ret; } @@ -145,8 +156,10 @@ static void bochs_dispi_write(struct bochs_device *bochs, u16 reg, u16 val) writew(val, bochs->mmio + offset); } else { +#ifdef CONFIG_HAS_IOPORT outw(reg, VBE_DISPI_IOPORT_INDEX); outw(val, VBE_DISPI_IOPORT_DATA); +#endif } } @@ -229,6 +242,10 @@ static int bochs_hw_init(struct drm_device *dev) return -ENOMEM; } } else { + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) { + DRM_ERROR("I/O ports are not supported\n"); + return -EIO; + } ioaddr = VBE_DISPI_IOPORT_INDEX; iosize = 2; if (!request_region(ioaddr, iosize, "bochs-drm")) { diff --git a/drivers/gpu/drm/tiny/cirrus.c b/drivers/gpu/drm/tiny/cirrus.c index 594bc472862f..c65fea049bc7 100644 --- a/drivers/gpu/drm/tiny/cirrus.c +++ b/drivers/gpu/drm/tiny/cirrus.c @@ -508,8 +508,10 @@ static void cirrus_crtc_helper_atomic_enable(struct drm_crtc *crtc, cirrus_mode_set(cirrus, &crtc_state->mode); +#ifdef CONFIG_HAS_IOPORT /* Unblank (needed on S3 resume, vgabios doesn't do it then) */ outb(VGA_AR_ENABLE_DISPLAY, VGA_ATT_W); +#endif drm_dev_exit(idx); }