diff mbox series

[v2,1/5] drm/ssd130x: Make default width and height to be controller dependent

Message ID 20230609170941.1150941-2-javierm@redhat.com (mailing list archive)
State Accepted, archived
Headers show
Series drm/ssd130x: A few enhancements and cleanups | expand

Commit Message

Javier Martinez Canillas June 9, 2023, 5:09 p.m. UTC
Currently the driver hardcodes the default values to 96x16 pixels but this
default resolution depends on the controller. The datasheets for the chips
describes the following display controller resolutions:

 - SH1106:  132 x 64 Dot Matrix OLED/PLED
 - SSD1305: 132 x 64 Dot Matrix OLED/PLED
 - SSD1306: 128 x 64 Dot Matrix OLED/PLED
 - SSD1307: 128 x 39 Dot Matrix OLED/PLED
 - SSD1309: 128 x 64 Dot Matrix OLED/PLED

Add this information to the devices' info structures, and use it set as a
default if not defined in DT rather than hardcoding to an arbitrary value.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
---

(no changes since v1)

 drivers/gpu/drm/solomon/ssd130x.c | 14 ++++++++++++--
 drivers/gpu/drm/solomon/ssd130x.h |  2 ++
 2 files changed, 14 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/solomon/ssd130x.c b/drivers/gpu/drm/solomon/ssd130x.c
index 8cbf5aa66e19..a0e5e26c0bc9 100644
--- a/drivers/gpu/drm/solomon/ssd130x.c
+++ b/drivers/gpu/drm/solomon/ssd130x.c
@@ -99,29 +99,39 @@  const struct ssd130x_deviceinfo ssd130x_variants[] = {
 		.default_vcomh = 0x40,
 		.default_dclk_div = 1,
 		.default_dclk_frq = 5,
+		.default_width = 132,
+		.default_height = 64,
 		.page_mode_only = 1,
 	},
 	[SSD1305_ID] = {
 		.default_vcomh = 0x34,
 		.default_dclk_div = 1,
 		.default_dclk_frq = 7,
+		.default_width = 132,
+		.default_height = 64,
 	},
 	[SSD1306_ID] = {
 		.default_vcomh = 0x20,
 		.default_dclk_div = 1,
 		.default_dclk_frq = 8,
 		.need_chargepump = 1,
+		.default_width = 128,
+		.default_height = 64,
 	},
 	[SSD1307_ID] = {
 		.default_vcomh = 0x20,
 		.default_dclk_div = 2,
 		.default_dclk_frq = 12,
 		.need_pwm = 1,
+		.default_width = 128,
+		.default_height = 39,
 	},
 	[SSD1309_ID] = {
 		.default_vcomh = 0x34,
 		.default_dclk_div = 1,
 		.default_dclk_frq = 10,
+		.default_width = 128,
+		.default_height = 64,
 	}
 };
 EXPORT_SYMBOL_NS_GPL(ssd130x_variants, DRM_SSD130X);
@@ -798,10 +808,10 @@  static void ssd130x_parse_properties(struct ssd130x_device *ssd130x)
 	struct device *dev = ssd130x->dev;
 
 	if (device_property_read_u32(dev, "solomon,width", &ssd130x->width))
-		ssd130x->width = 96;
+		ssd130x->width = ssd130x->device_info->default_width;
 
 	if (device_property_read_u32(dev, "solomon,height", &ssd130x->height))
-		ssd130x->height = 16;
+		ssd130x->height = ssd130x->device_info->default_height;
 
 	if (device_property_read_u32(dev, "solomon,page-offset", &ssd130x->page_offset))
 		ssd130x->page_offset = 1;
diff --git a/drivers/gpu/drm/solomon/ssd130x.h b/drivers/gpu/drm/solomon/ssd130x.h
index db03ee5db392..a2bc8d75078b 100644
--- a/drivers/gpu/drm/solomon/ssd130x.h
+++ b/drivers/gpu/drm/solomon/ssd130x.h
@@ -37,6 +37,8 @@  struct ssd130x_deviceinfo {
 	u32 default_vcomh;
 	u32 default_dclk_div;
 	u32 default_dclk_frq;
+	u32 default_width;
+	u32 default_height;
 	int need_pwm;
 	int need_chargepump;
 	bool page_mode_only;